Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HCl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Investigation of forestry resources and other remote sensing data. 1: LANDSAT. 2: Remote sensing of volcanic emissions

Computer classification of LANDSAT data was used for forest type mapping in New England. The ability to classify areas of hardwood, softwood, and mixed tree types was assessed along with determining clearcut regions and gypsy moth defoliation. Applications of the information to forest management and locating potential deer yards were investigated. The principal activities concerned with remote sensing of volcanic emissions centered around the development of remote sensors for SO2 and HCl gas, and their use at appropriate volcanic sites. Two major areas were investigated (Masaya, Nicaragua, and St. Helens, Washington) along with several minor ones.

Birnie, R. W.↗
NASA NTRS1984

Chromium electrodes for REDOX cells

An improved electrode having a gold coating for use in the anode compartment of a REDOX cell is described. The anode fluid utilizes a chromic/chromous couple. A carbon felt is soaked in methanol, rinsed in water, dried and then heated in KOH after which it is again washed in deionized water and dried. The felt is then moistened with a methanol water solution containing chloroauric acid and is stored in a dark place while still in contact with the gold-containing solution. After all the gold-containing solution is absorbed in the felt, the latter is dried by heat and then heat treated at a substantially greater temperature. The felt is then suitable for use as an electrode and is wetted with water or up to two molar HCl prior to installation in a REDOX cell. The novelty of the invention lies in the use of KOH for cleaning the felt and the use of alcohol as a carrier for the gold together with the heat treating procedure.

Jalan, V.↗
NASA NTRS1984

Measurement of H2O and other trace gases in the stratosphere using a high resolution far-infrared spectrometer at 28 km

Data analysis results from the 1983 BIC 1 and 2 balloon flights are presented, with emphasis on H2O2, OH, HCL, O3, O2, and H2O. A 2 sigma limit on H2O2 abundance was set, as a function of altitude. This is comparable to or less than the theoretically predicted winter abundances from the 2-D models of Dupont, with a large enough summer maximum to facilitate concentration profile measurements. There is a definite drop in OH concentration from day to night following two model profiles. There was general agreement between HF measurements. The dominant role of the far wings of H2O lines in low altitude spectra was recognized. The strength of these wings exceeds that of many molecular line cores, including O3 and O2, especially near the long wavelength end of the spectra (100 cm (-1)). Newly measured positions for O3 and H2O were obtained.

Traub, W. A.↗
NASA NTRS1984

Optical and other property changes of M-50 bearing steel surfaces for different lubricants and additive prior to scuffing

An ester lubricant base oil containing one or more standard additives to protect against wear, corrosion, and oxidation was used in an experimental ball/plate elastohydrodynamic contact under load and speed conditions such as to induce scuffing failure in short times. Both the ball and the plate were of identically treated M-50 steel. After various periods of operating time the wear track on the plate was examined with an interference microscope of plus or minus 30 A depth resolution and sometimes also with a scanning ellipsometer and an Auger spectrometer. The optically deduced surface profiles varied with wavelength, indicating the presence of surface coatings, which were confirmed by the other instruments. As scuffing was approached, a thin (approximately A) oxide layer and a carbide layer formed in the wear track in particular when tricresylphosphate antiwear additive was present in the lubricant. The rates of the formation of these layers and their reactivity toward dilute alcholic HCl depended strongly on the lubricant and additives. Based on these results suggestions for improved formulations and a test method for bearing reliability could be proposed.

Lauer, J. L.↗
NASA NTRS1984

Aluminum chloride formation on Space Shuttle aluminum oxide

Samples of particulates collected from the exhaust of Space Shuttle launches STS-1, -4, -5, -6, and -7 were analyzed. Scanning electron microscopy and X-ray diffractometry of these samples indicated that the particulates were spherical and predominantly composed of aluminum oxide. The water-soluble weight fraction, pH, acid-soluble weight fraction, and insoluble weight fraction were determined for each sample. Water-soluble weight fractions averaged about 7 percent of the total sample weight, were generally very acidic, and contained significantly elevated concentrations of chloride and aluminum (III) ion. The high concentrations of soluble aluminum (III) and chloride ions observed suggested that aluminum chlorides and/or oxychlorides had formed on the surface of the alumina particulates. More than 72 percent by weight of each sample was insoluble in either water or strong mineral acid, and was identified as alpha-Al2O3. The results from these analyses suggest that the surface of Space Shuttle exhaust alumina particulates will be highly acidic and heavily chlorided, and that a substantial amount of the surface chloride may be chemically associated with aluminum (III) ions rather than just physically adsorbed as HCl.

Cofer, W. R., III↗
NASA NTRS1984

Surface chloride salt formation on Space Shuttle exhaust alumina

Aluminum oxide samples from the exhaust of Space Shuttle launches STS-1, STS-4, STS-5, and STS-6 were collected from surfaces on or around the launch pad complex and chemically analyzed. The results indicate that the particulate solid-propellant rocket motor (SRM) alumina was heavily chlorided. Concentrations of water-soluble aluminum (III) ion were large, suggesting that the surface of the SRM alumina particles was rendered soluble by prior reactions with HCl and H2O in the SRM exhaust cloud. These results suggest that Space Shuttle exhaust alumina particles are good sites for nucleation and condensation of atmospheric water. Laboratory experiments conducted at 220 C suggest that partial surface chloriding of alumina may occur in hot Space Shuttle exhaust plumes.

Cofer, W. R., III↗
NASA NTRS1983

Space Shuttle Environmental Effects: The First 5 Flights

Environmental effects associated with the first five Space Shuttle flights were monitored by the National Aeronautics and Space Administration (NASA) and the U.S. Air Force (USAF). Results and interpretations from this effort were reported at the December 1982 joint NASA-USAF conference. The conference proceedings are presented in this document. Most of the monitoring activity was focused on the launch cloud, emphasizing surface effects on the biota and air quality, model prediction of surface concentrations of HCl gas and Al2O3 dust, and airborne measurements of cloud composition. In general, assessments and predictions made in the April 1978 Final Environmental Impact Statement for the Space Shuttle Program were verified. Fallout of acidic mist and dust within 3 mi to 5 mi of the launch pad was the only unexpected effect of the launch. Atomization of deluge water in the Shuttle exhaust is considered to be the most probable cause of this effect. Sonic booms were monitored for several landings at Edwards Air Force Base, California; results agreed well with model predictions.

Potter, A.↗
NASA NTRS1985

Surface effects of corrosive media on hardness, friction, and wear of materials

Hardness, friction, and wear experiments were conducted with magnesium oxide exposed to various corrosive media and also with elemental iron and nickel exposed to water and NaOH. Chlorides such as MgCl2 and sodium containing films were formed on cleaved magnesium oxide surfaces. The MgCl2 films softened the magnesium oxide surfaces and caused high friction and great deformation. Hardness was strongly influenced by the pH value of the HCl-containing solution. The lower the pH, the lower the microhardness. Neither the pH value of nor the immersion time in NaOH containing, NaCl containing, and HNO3 containing solutions influenced the microhardness of magnesium oxide. NaOH formed a protective and low friction film on iron surfaces. The coefficient of friction and the wear for iron were low at concentrations of NaOH higher than 0.01 N. An increase in NaOH concentration resulted in a decrease in the concentration of ferric oxide on the iron surface. It took less NaOH to form a protective, low friction film on nickel than on iron.

Miyoshi, K.↗
NASA NTRS1984

Far-infrared Spectroscopy of Interstellar Gas

Research results of far-infrared spectroscopy with the Kuiper Airborne Observatory are discussed. Both high and intermediate resolution have been successfully employed in the detection of many new molecular and atomic lines including rotational transition of hydrides such as OH, H2O, NH3 and HCl; high J rotational transitions of CO; and the ground state fine structure transitions of atomic carbon, oxygen, singly ionized carbon and doubly ionized oxygen and nitrogen. These transitions have been used to study the physics and chemistry of clouds throughout the galaxy, in the galactic center region and in neighboring galaxies. This discussion is limited to spectroscopic studies of interstellar gas.

Phillips, T. G.↗
NASA NTRS1985

Photoabsorption and photodissociation of molecules important in the interstellar medium

The photoabsorption and photodissociation cross sections of several interstellar molecules and radicals in the 105 to 210 nm region were measured. The research results accomplished are briefly described. Photoabsorption cross sections of OD and CN, and photoabsorption and photodissociation of HCl, and photoabsorption and photodissociation cross sections of CH3OH are discussed.

Lee, L. C.↗
NASA NTRS1984

Importance of formaldehyde in cloud chemistry

A physical-chemical model which is an extension of that of Hong and Carmichael (1983) is used to investigate the role of formaldehyde in cloud chemistry. This model takes into account the mass transfer of SO2, O3, NH3, HNO3, H2O2, CO2, HCl, HCHO, O2, OH and HO2 into cloud droplets and their subsequent chemical reactions. The model is used to assess the importance of S(IV)-HCHO adduct formation, the reduction of H2O2 by HCHO, HCHO-free radical interactions, and the formation of HCOOH in the presence of HCHO in cloud droplets. Illustrative calculations indicate that the presence of HCHO inhibits sulfate production rate in cloud droplets. The direct inhibition of sulfate production rate in cloudwater due to nucleophilic addition of HSO3(-) to HCHO(aq) to form hydroxymethanesulfonate is generally low for concentrations of HCHO typical of ambient air. However, inhibition of sulfate production due to formaldehyde-free radical interactions in solution can be important. These formaldehyde-free radical reactions can also generate appreciable quantities of formic acid.

Adewuyi, Y. G.↗
NASA NTRS1984

Far infrared remote sounding of stratospheric temperature and trace gas distributions

An evaluation is made of the potential usefulness of far-IR thermal emission measurements for simultaneous retrieval of temperature and constituent distributions. Attention is given to the design and performance of a high resolution Michelson interferometer which is currently used in balloon-borne far-IR stratospheric studies. Numerical results based on synthetic limb radiance data for model atmospheres are presented. Formal inversion techniques, together with a radiative transfer model that is based on line-by-line transmittance calculations, are used. Numerical results based on synthetic limb radiance data are given in order to assess the retrieval accuracies of the temperature profiles and the vertical mixing ratio profiles of O3, HCl, and OH.

Abbas, M. M.↗
NASA NTRS1985

Detection of atomic oxygen and further line assignments in the far-infrared stratospheric spectrum

Recent progress in high-resolution measurement of sub-millimeter and far-infrared emission in the stratosphere is reviewed. Attention is given to the results of recent balloon measurements of the minor stratospheric constituents in the spectral range 40-190 per cm. Emission spectra are presented for HCl; HF; and OH. Emission spectra were also obtained for atomic oxygen; hydrobromic acid; and hydroperoxyl radical. The possibility of detecting HO2 and H2O2 in the far-infrared is also briefly discussed.

Carli, B.↗
NASA NTRS1984

The high resolution submillimetre spectrum of the stratosphere

The structure of the stratospheric spectrum, measured with a resolution of 0.0033/cm unapodized in the 7-90/cm spectral interval is described. The spectra from measurements recorded on April 24, 1979 from a balloon-borne platform at about 39 km altitude launched from the National Scientific Balloon Facility of Palestine, TX are presented. The main spectroscopic constituents include a few strong and saturated lines due to the rotational spectrum of water vapor, to magnetic dipole transitions of oxygen, and to the rotational spectrum of ozone. It is shown that the lines of ozone prevent the positive identification of the contribution to the submillimeter spectrum of several minor constituents such as HF, HCl, HCN, HNO3, and N2O. The assignments which are possible in the spectra are revised.

Carli, B.↗
NASA NTRS1985

pH profile of the adsorption of nucleotides onto montmorillonite. I - Selected homoionic clays

The effect of pH and adsorbed ions on the adsorption of purine and pyrimidine nucleotides on montmorillonite clay was studied experimentally. The specific nucleotides examined were: 5 prime-AMP; 3-prime AMP; and 5 prime-CMP. The pH of the clay samples was adjusted to various levels in the 2-12 pH range using microliter volumes of concentrated acid (1N HCl) and base (1NHNaOH). It was found that preferential adsorption among nulceotides was dependent on the pH level and on the characteristics of the substituted metal cation and anion exchange mechanisms. Below pH 4, adsorption was attributed to cation and anion exchange mechanisms. Above pH 4, however, adsorption was attributed to the complexation mechanisms occurring between the metal cations in the clay exchange site and in the biomolecule. The possible role of homoionic clays in the concentration mechanisms of biomonomers in the prebiotic environment is discussed.

Lawless, J. G.↗
NASA NTRS1985

The radiolysis and radioracemization of amino acids on clays

The effects of the surfaces of kaolinite and bentonite clays on the radiolysis and radioracemization of L-leucine and its hydrochloride salt have been investigated experimentally. L-leucine and its hydrochloride salt were deposited on the clays and the amino acid/clay preparations were irradiated by a Co-60 gamma-ray source which induced 2-89 percent radiolysis. The efficiency of radiolysis and radioracemization were measured using gas chromatography. Results were obtained for leucine in 0.1 M aqueous solution for comparison with the clay-deposted leucine and leucine hydrochloride. It is found that radiolysis and radioracemization in the samples occurred according to a pseudo-first-order rate law. Comparison of the specific rate constants showed that leucine and its hydrochloride salt were the most resistant to both radiolysis and radioracemization, followed by leucine and its hydrochloride salt on kaolin. Leucine and its HCl salt on bentonite, and leucine in aqueous solution were found to be the least resistant to radiolysis and radioracemization. The experimental results are intepreted with respect to the Vester-Ulbricht mechanism for the origin of optical activity.

Bonner, W. A.↗
NASA NTRS1985

Rate constant for the reaction Cl + HO2NO2 yielding products

The rates for the reaction of Cl atoms iwth HO2NO2 were calculated from data obtained by the use of the discharge flow/resonance fluorescence (DF/RF) and the discharge flow/mass spectrometric (DF/MS) techniques. The total rate constant, k1, for the overall reaction: 1a (Cl + HO2NO2 yielding HCl + NO2 +O2), 1b (yielding HO2 + ClNO2), and the two possible additional channels was found to be less than 1.0 x 10 to the -13th cu cm/s at 296 K. The value of (k1a + k1b) was found to be 3.4 + or - 1.4) x 10 to the -14th cu cm/s. Thus, the reaction of Cl with peroxynitric acid is too slow, by a factor of 100, to contribute significantly to the hydrogen abstraction by Cl in the stratosphere.

Simonaitis, R.↗
NASA NTRS1983

Development of a radiation-hard CMOS process

It is recommended that various techniques be investigated which appear to have the potential for improving the radiation hardness of CMOS devices for prolonged space flight mission. The three key recommended processing techniques are: (1) making the gate oxide thin. It has been shown that radiation degradation is proportional to the cube of oxide thickness so that a relatively small reduction in thickness can greatly improve radiation resistance; (2) cleanliness and contamination control; and (3) to investigate different oxide growth (low temperature dry, TCE and HCL). All three produce high quality clean oxides, which are more radiation tolerant. Technique 2 addresses the reduction of metallic contamination. Technique 3 will produce a higher quality oxide by using slow growth rate conditions, and will minimize the effects of any residual sodium contamination through the introduction of hydrogen and chlorine into the oxide during growth.

Power, W. L.↗