Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Reactivity and Mechanisms of Methane, Ethane, and Benzene C–H Amination with an Iodine(III) Bistriflimide Complex

The iodine(III) bistriflamide complex (C 6 F 5 ) III I(NTf 2 ) 2 in HNTf 2 (bistriflimide acid; (CF 3 SO 2 ) 2 NH) selectively aminates methane and ethane. At a 100 °C reaction with methane after 3 h, it resulted in the exclusive formation of MeNTf 2 with a yield of approximately 40%. For ethane, at 100 °C in 2 h, a > 80% yield was found for a combination of monofunctionalized and difunctionalized amination products. In contrast to alkanes giving functionalized products, the reaction of (C 6 F 5 ) III I(NTf 2 ) 2 with benzene resulted in being stalled at (C 6 F 5 )I III (Ph)(NTf 2 ) with a <5% conversion to PhNTf 2 even at 120 °C. PWPB95-D3(BJ) density functional theory calculations indicate that C–H activation is the lowest energy pathway to break the hydrocarbon bonds and is lower in energy than radical, electron-transfer, proton-coupled electron-transfer, or hydride substitution pathways. For methane, from the (C 6 F 5 )I III (CH 3 )(NTf 2 ) intermediate, there is a one-step amine functionalization mechanism that avoids a carbocation intermediate. For ethane, from the (C 6 F 5 )I III (Et)(NTf 2 ) intermediate, dynamics simulations suggest the possibility of a competitive two-step functionalization pathway that involves a short-lived carbocation intermediate. As a result, a reaction coordinate strain analysis provides a straightforward model for understanding the relative reactivity rates for alkyl versus aryl functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Fe- and Ru-H-Mordenites for Polyethylene Upcycling: Insights from Thermo-Catalytic Pyrolysis and DFT Studies

Catalytic pyrolysis of polyethylene (PE) was performed using Fe- and Ru-impregnated H-mordenite (HM) catalysts to produce lighter hydrocarbons. Catalyst surface areas were analyzed by N 2 adsorption−desorption and acidity by NH 3 - TPD studies. Reducibility of metal from H 2 -TPR, experiments indicate multiple oxidation states of Fe due to higher H 2 consumption. The catalyst activity studies monitored by GC− MS analysis highlight the importance of temperature and PE: catalyst ratio in optimizing hydrocarbon selectivity to C 1 −C 4 alkanes and C 2 −C 5 olefins. Studies with polymer-to-catalyst ratios of 1:1 and 1:2 at higher temperature increased PE conversion with stronger acid sites favoring conversion and moderate acid sites improving selectivity toward lighter olefins. While propane dominated at lower temperatures, propene was the main product at 500 °C. Both catalysts exhibited overall similar conversion, while Ru-HM yielded >40% propene selectivity compared to <40% for Fe-HM. Ethylene selectivity exceeded 10% in both cases. Density functional theory simulations using a C 4 surrogate on Ru-HM confirmed that late-stage cracking dominates dehydrogenation, validating the proposed reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

H 2 Evolution from a Thiolate-Bound Ni(III) Hydride

A thiolate-bound Ni(III) hydride complex, related to the intermediates proposed in Ni-based hydrogenase enzymes, was synthesized and characterized. This paramagnetic complex was demonstrated to be competent for H 2 release upon warming, and the H-H bond forming step was mechanistically probed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Energetics of CO 2 and H 2 O adsorption on alkaline earth metal doped TiO 2

The process of CO 2 and H 2 O adsorption on the surface of nano-oxide semiconductors is important in the overall performance of artificial photosynthesis and other applications. In this study, we explored the thermodynamics of CO 2 and H 2 O adsorption on TiO 2 as a function of surface chemistry. We applied gas adsorption calorimetry to investigate the energetics of adsorption of those molecules on the surface of anatase nanoparticles. In an attempt to increase TiO 2 surface affinity to CO 2 and H 2 O, TiO 2 was doped with alkaline earth metals (MgO, CaO, SrO, and BaO) by manipulating the chemical synthesis. Adsorption studies using diffuse reflectance infrared spectroscopy at different temperatures indicate that due to the segregation of alkaline earth metals on the surface of TiO 2 nanoparticles, both CO 2 and subsequent H2O adsorption amounts could be increased. CO 2 adsorbs in two different manners, forming carbonates which can be removed at temperatures lower than 700 °C, and a more stable linear adsorption that remains even at 700 °C. Additionally to the surface energetic effects, doping also increased specific surface area, resulting in further improvement in net gas adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Characterizing the solid hydrolysis product, UF 4 (H 2 O) 2.5 , generated from neat water reactions with UF 4 at room temperature

Uranium tetrafluoride (UF 4 ) is an important intermediate in the production of UF 6 and uranium metal. Room temperature hydrolysis of UF 4 was investigated using a combination of Fluorine-19 nuclear magnetic resonance spectroscopy ( 19 F NMR), Raman and infrared spectroscopy, powder X-ray diffraction, and microscopy measurements. UF 4 (H 2 O) 2.5 was identified as the primary solid hydrolysis product when anhydrous UF 4 was stirred in deionized water. Static NMR and 19 F magic angle spinning NMR measurements revealed that a small amount of uranyl fluoride can also form when anhydrous UF 4 is left in water, although this species comprises less than 5% of the total sample with the remaining parts being UF 4 (H 2 O) 2.5 . Since UF 4 is generally considered to be stable under ambient conditions, these findings mark the first time that a room temperature reaction between UF 4 and water has been detected and analyzed without interference from additional chemical reagents. The Raman characterization of UF 4 (H 2 O) 2.5 presented herein is the first on record. Since UF 4 is one of the most used intermediates during chemical conversion of uranium ore to uranium metal for nuclear fuel and weapons, the results presented herein are applicable to numerous nuclear science fields where solid state detection of uranium is of value, including nuclear nonproliferation, nuclear forensics, and environmental remediation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

A novel symmetric pyrazine (pyz)-bridged uranyl dimer [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– : synthesis, structure and computational analysis

In this work, we report on the synthesis of (HPyz + ) 2 [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 ·2H 2 O which features a novel pyrazine-bridged uranyl dimer, [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– . A rigorous computational and experimental analysis of this compound was performed to fully explore the influence of coordination on the electronic structure and potential charge-transfer characteristics of this dimer, revealing a delocalized π-system across the bridging pyrazine and the axial components of both uranyl centers. Electrostatic surface potentials, used to rationalize the observed assembly, indicate a decreased basicity of the uranyl oxo versus [UO 2 Cl 4 ] 2– , and signify a lessened capacity for the terminal –yl oxos of the [UO 2 Cl 3 (H 2 O)(Pyz) 0.5 ] 2 2– dimer to participate in supramolecular assembly. A combined density functional theory (DFT) and quantum theory of atoms in molecules (QTAIM) analysis further evidenced an increase in U&#x2550;O bond strengths within the dimer, which is supported by a blue shift in the characteristic Raman-active uranyl symmetric stretch (ν 1 ) with respect to the more typically observed [UO 2 Cl 4 ] 2– .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Unravelling the room temperature growth of two-dimensional h-BN nanosheets for multifunctional applications

The room temperature growth of two-dimensional van der Waals (2D-vdW) materials is indispensable for state-of-the-art nanotechnology. Low temperature growth supersedes the requirement of elevated growth temperatures accompanied with high thermal budgets. Moreover, for electronic applications, low or room temperature growth reduces the possibility of intrinsic film-substrate interfacial thermal diffusion related deterioration of the functional properties and the consequent deterioration of the device performance. Here, we demonstrated the growth of ultrawide-bandgap boron nitride (BN) at room temperature by using the pulsed laser deposition (PLD) process, which exhibited various functional properties for potential applications. Comprehensive chemical, spectroscopic and microscopic characterizations confirmed the growth of ordered nanosheet-like hexagonal BN (h-BN). Functionally, the nanosheets show hydrophobicity, high lubricity (low coefficient of friction), and a low refractive index within the visible to near-infrared wavelength range, and room temperature single-photon quantum emission. In conclusion, our work unveils an important step that brings a plethora of potential applications for these room temperature grown h-BN nanosheets as the synthesis can be feasible on any given substrate, thus creating a scenario for “h-BN on demand” under a frugal thermal budget.

2D h-BN↗
DOE OSTI2021

EMC3-EIRENE simulation of first wall recycling fluxes in W7-X with relation to H-alpha measurements

In the Wendelstein 7-X stellarator, the main locations of particle sources are expected to be the carbon divertors, baffles and graphite heat shield first wall. In this paper, the heat shield is implemented in EMC3-EIRENE to understand the expected areas and magnitudes of the recycling flux to this component. It is found that in the simulation the heat shield is not a significant source of recycling neutrals. The areas of simulated recycling flux are shown to correlate well with footprints of plasma-wetting seen in post-experimental campaign in-vessel inspection photos. EMC3-EIRENE reconstruction of line-integrated H-alpha measurements at the heat shield indicate that the majority of emission does not come from local recycling neutrals. Rather, the H-alpha signals at the heat shield are dominated by ionization of neutrals which have leaked from the divertor/baffle region into the midplane. The magnitude of the H-alpha line emission from the synthetic reconstruction is consistent with the experiment, indicating that a large overestimation of heat shield recycling would occur if these measurements were assumed to be from local recycling sources. In the future, it may be possible to obtain some information of local recycling from the heat shield since it was found that the majority of the recycling flux occurs on two well-localized areas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

The formation of an radial edge electric field due to finite ion orbit width effects is the possible root cause of the H-mode edge

Abstract Full orbit-following simulations of thermal ions show that finite ion-orbit width effects create charge separation near the last closed flux surface (LCFS) which generates a localized radial electric field. Experimentally, edge electric fields are observed in H-mode plasmas and they are necessary for the edge turbulence suppression via the E × B flow shear mechanism. Confined trapped (and to a lesser extent co-passing) ions near the plasma edge form a positive charge distribution outside the LCFS, while thermal electrons are tied more tightly to field lines owing to their small mass and are poorly confined outside the LCFS, hence charge neutrality is violated outside the LCFS. A large number of reported observations from spherical and conventional tokamaks support the results from the simulations although the simulations were not performed fully self consistently. The results suggest ways to lower the H-mode power threshold and optimize the H-mode plasma edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Isotopic and vibrational-level dependence of H 2 dissociation by electron impact

The low-energy electron-impact dissociation of molecular hydrogen has been a source of disagreement between various calculations and measurements for decades. Excitation of the ground state of H 2 into the dissociative b 3 $Σ$$$^{+}_{u}$ state is now well understood, with the most recent measurements being in excellent agreement with the molecular convergent close-coupling (MCCC) calculations of both integral and differential cross sections [Zawadzki et al., Phys. Rev. A 98, 062704 (2018)]. However, in the absence of similar measurements for vibrationally excited or isotopically substituted H 2 , cross sections for dissociation of these species must be determined by theory alone. We have identified large discrepancies between MCCC calculations and the recommended R-matrix cross sections for dissociation of vibrationally excited H 2 , D 2 , T 2 , HD, HT, and DT [Trevisan et al., Plasma Phys. Contr. Fusion 44 1263 (2002); Plasma Phys. Contr. Fusion 44, 2217 (2002)], with disagreement in both the isotope effect and dependence on initial vibrational level. Furthermore, we investigate the source of the discrepancies, and discuss the consequences for plasma models, which have incorporated the previously recommended data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Influence of hydrogenation on the vibrational density of states of magnetocaloric LaFe 11.4 Si 1.6 H 1.6

We report on the impact of magnetoelastic coupling on the magnetocaloric properties of LaFe 11.4 Si 1.6 H 1.6 in terms of the vibrational (phonon) density of states (VDOS), which we determined with 57 Fe nuclear resonant inelastic x-ray scattering (NRIXS) measurements and with density functional theory (DFT) based first-principles calculations in the ferromagnetic (FM) low-temperature and paramagnetic (PM) high-temperature phase. In experiments and calculations, we observe pronounced differences in the shape of the Fe-partial VDOS between nonhydrogenated and hydrogenated samples. Furthermore, this shows that hydrogen not only shifts the temperature of the first-order phase transition, but also affects the elastic response of the Fe subsystem significantly. In turn, the anomalous redshift of the Fe VDOS, observed by going to the low-volume PM phase, survives hydrogenation. As a consequence, the change in the Fe-specific vibrational entropy ΔS lat across the phase transition has the same sign as the magnetic and electronic contribution. DFT calculations show that the same mechanism, which is a consequence of the itinerant electron metamagnetism associated with the Fe subsystem, is effective in both the hydrogenated and the hydrogen-free compounds. Although reduced by 50% as compared to the hydrogen-free system, the measured change ΔS lat of 3.2 ± 1.9)J/ kg K across the FM-to-PM transition contributes with ~35 % significantly and cooperatively to the total isothermal entropy change ΔS iso . Hydrogenation is observed to induce an overall blueshift of the Fe VDOS with respect to the H-free compound; this effect, together with the enhanced Debye temperature observed, is a fingerprint of the hardening of the Fe sublattice by hydrogen incorporation. In addition, the mean Debye velocity of sound of LaFe 11.4 Si 1.6 H 1.6 was determined from the NRIXS and the DFT data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Competing ionization and dissociation in the H 2 gerade system

A numerically solvable two-dimensional (2D) model, employed by the authors to study the dissociative recombination of H$^+_2$ in the ungerade symmetry, is extended to describe the collision process in the gerade symmetry of H$_2$. In this symmetry, the ionization and dissociation processes are driven primarily by the direct, curve-crossing mechanism. The model is represented by a set of three coupled electronic channels in 2D, in the space of $\textit{s, p, d}$ partial waves of the colliding electron. In this work, we demonstrate that the Born-Oppenheimer properties of the H$_2$ molecule in the relevant range of internuclear distances can be described by such a model. The molecular rotational degrees of freedom are accounted for by the rotational frame transformation. The numerical solution of the model is discussed, and the resulting rovibrationally inelastic and dissociative recombination cross sections are compared with the available data.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Anomalous transport in the H-mode pedestal of Alcator C-Mod discharges

Anomalous transport in the H-mode pedestal region of five Alcator C-Mod discharges, representing a collisionality scan is analyzed. The understanding of anomalous transport in the pedestal region is important for the development of a comprehensive model for the H-mode pedestal slope. In this research, a possible role of the drift resistive inertial ballooning modes (Rafiq et al 2010 Phys. Plasmas 17 082511) in the edge of Alcator C-Mod discharges is analyzed. The stability analysis, carried out using the TRANSP code, indicates that the DRIBM modes are strongly unstable in Alcator C-Mod discharges with large electron collisionality. An improved interpretive analysis of H-mode pedestal experimental data is carried out utilizing the additive flux minimization technique (Pankin et al 2013 Phys. Plasmas 20 102501) together with the guiding-center neoclassical kinetic XGC0 code. The neoclassical and neutral physics are simulated in the XGC0 code and the anomalous fluxes are computed using the additive flux minimization technique. The anomalous fluxes are reconstructed and compared with each other for the collisionality scan Alcator C-Mod discharges. It is found that the electron thermal anomalous diffusivities at the pedestal top increase with the electron collisionality. This dependence can also point to the drift resistive inertial ballooning modes as the modes that drive the anomalous transport in the plasma edge of highly collisional discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Search for flavour-changing neutral $tqH$ interactions with $H$ → γγ in $pp$ collisions at $ \sqrt{s} $ = 13 TeV using the ATLAS detector

A search for flavour-changing neutral interactions involving the top quark, the Higgs boson and an up-type quark q (q = c, u) is presented. The proton-proton collision data set used, with an integrated luminosity of 139 fb –1 , was collected at $\sqrt{s}$ = 13 TeV by the ATLAS experiment at the Large Hadron Collider. Both the decay process t → qH in $t\bar{t}$ production and the production process pp → tH, with the Higgs boson decaying into two photons, are investigated. No significant excess is observed and upper limits are set on the t → cH and the t → uH branching ratios of 4.3 × 10 –4 and 3.8 × 10 –4 , respectively, at the 95% confidence level, while the expected limits in the absence of signal are 4.7 × 10 –4 and 3.9 × 10 –4 . Combining this search with ATLAS searches in the H → τ + τ – and H → $b\bar{b}$ final states yields observed (expected) upper limits on the t → cH branching ratio of 5.8 × 10 –4 (3.0 × 10 –4 ) at the 95% confidence level. The corresponding observed (expected) upper limit on the t → uH branching ratio is 4.0 × 10 –4 (2.4 × 10 –4 ).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Active tungsten expulsion in ELM-absent H-mode plasmas via on-demand ELM triggering with lithium granule injection

Lithium granules gravitationally injected into the upper X-point region demonstrated on-demand edge-localized modes (ELM) triggering in otherwise ELM-suppressed H-mode plasmas on the Experimental Advanced Superconducting Tokamak. Sub-mm lithium granules dropped into enhanced D-alpha H-mode plasmas achieved a high triggering efficiency, while enabling ELM frequencies from several to hundreds of hertz. Core radiation from heavy impurities, dominated by W, was reduced by up to 60%, and the normalized energy confinement increased by up to 30%. At low injection frequencies, ELMs of substantially reduced size compared to spontaneous type-I ELMs were observed. At high injection frequencies, a transition to a mixed ELM phase occurred, characterized by intermittent larger ELMs and suppression of the quasi-coherent mode, achieving the most significant W reduction and energy confinement improvement. These results highlight a promising pathway for active W control via controlled, small ELMs in long-pulse, high-performance scenarios.

EDA H-mode↗
DOE OSTI2023

Measurements of Higgs boson production by gluon-gluon fusion and vector-boson fusion using and vector-boson using $H$ → $WW*$ → $evμv$ decays in $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Higgs boson production via gluon-gluon fusion and vector-boson fusion in proton-proton collisions is measured in the $H$ → $WW*$ → $evμv$ decay channel. The Large Hadron Collider delivered proton-proton collisions at a center-of-mass energy of 13 TeV between 2015 and 2018, which were recorded by the ATLAS detector, corresponding to an integrated luminosity of 139 fb -1 . The total cross sections for Higgs boson production by gluon-gluon fusion and vector-boson fusion times the $H$ $\rightarrow$ $WW$* branching ratio are measured to be 12.0 ± 1.4 and ${0.75}_{- 0.16}^{+ 0.19}$ pb, respectively, in agreement with the Standard Model predictions of 10.4 ± 0.6 and 0.81 ± 0.02 pb. Higgs boson production is further characterized through measurements of Simplified Template Cross Sections in a total of 11 kinematic fiducial regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Identification of a window for quiescent H-mode operation in MHD stability diagram of DIII-D plasmas

A window for quiescent H-mode (QH-mode) operation in DIII-D plasmas in the diagram of pedestal magnetohydrodynamic (MHD) stability was identified through linear MHD stability analysis, accounting for the effects of plasma rotation and ion diamagnetic drift. The operation window lies between the stability boundaries of the kink/peeling mode (K/PM) identified with and without the inclusion of plasma rotation effects. In this region, the mode remains unstable unless rotation effects are considered alongside the ion diamagnetic drift, which is consistently included in the analysis. The stabilization of the MHD mode, facilitated by the coupled effects of plasma rotation and ion diamagnetic drift, plays a crucial role in widening the window, enabling the attainment of the QH-mode state. Furthermore, the suppression of edge localized modes (ELM) can be achieved by controlling the pedestal structure to ensure the plasma state remains within the operation window. The location of the operation window in the stability diagram depends on the K/PM stability properties. Therefore, optimizing conditions for QH-mode requires adjustments based on changes in stability characteristics. A pressure pedestal and its associated bootstrap current density near the last closed flux surface are advantageous for situating the plasma state within the window. However, excessive current density can trigger ELMs. This trend was confirmed through comparisons of MHD stability diagrams between QH-mode and ELMy H-mode plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗