Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fermilab”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

LCSL-II Cryomodule Testing at Fermilab

Cold powered testing of all LCLS-II production cryomodules at Fermilab is complete as of February 2021. A total of twenty-five tests on both 1.3 GHz and 3.9 GHz cryomodules were conducted over a nearly five year time span beginning in the summer of 2016. During the course of this campaign cutting-edge results for cavity Q₀ and gradient in continuous wave operation were achieved. A summary of all test results will be presented, with a comparison to established acceptance criteria, as well as overall test stand statistics and lessons learned.

43 PARTICLE ACCELERATORS↗

Application of the ASME Boiler and Pressure Vessel Code in the Design of SRF Cavities at Fermilab

Jacketed Superconducting Radio Frequency (SRF) cavities structurally comprise of an inner niobium vessel surrounded by a liquid helium containment vessels. The pressure of the helium bath and/or its volume might be such that a jacketed SRF cavity shall be considered a system of pressure vessels. Thus, methods described in the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (BPVC) should be used to analyze the structural soundness of jacketed SRF cavities. This paper will report the use of the set of rules developed at Fermilab for the design of SRF cavities, such as jacketed 1.3 GHz cavities for LCLS-II HE and jacketed Single Spoke Resonator type~2 (SSR2) for PIP-II, to ensure a similar level of safety as prescribed by the ASME BPVC.

43 PARTICLE ACCELERATORS↗

Status of the Muon g-2 experiment at Fermilab

The aim of the Muon g-2 g − 2 Experiment at Fermilab (E989) is to measure the muon anomalous magnetic moment ( a_\mu a μ ) with a relative precision of 140 parts-per-billion (ppb). This precision, which is a factor of four improvement from the current experimental result, will allow for a much more stringent test of the Standard Model. This paper present the current status of the experimental measurement of a_\mu a μ after the first physics run.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searching for muon to electron conversion: The Mu2e experiment at Fermilab

The Mu2e experiment will measure the charged-lepton flavor violating (CLFV) neutrino-less conversion of a negative muon into an electron in the field of a nucleus. Mu2e will improve the previous measurement by four orders of magnitude, reaching a 90% C.L. limit of 8\times10^{-17} 8 × 10 − 17 on the conversion rate. The experiment will reach mass scales of nearly 10^4 10 4 TeV, far beyond the direct reach of colliders. The experiment is sensitive to a wide range of new physics, complementing and extending other CLFV searches. Mu2e is under design and construction at the Muon Campus of Fermilab; we expect to start taking physics data in 2022 with 3 years of running to achieve our target sensitivity.

Bonventre, Richard↗

An Improved W Boson Mass Measurement Using the Collider Detector at Fermilab

The mass of the W boson is one of the most important parameters in the Standard Model. A precise measurement of the W boson mass, together with a precise measurement of the top quark mass, can constrain the mass of the undiscovered Higgs boson within the Standard Model framework or give a hint for physics beyond the Standard Model. This dissertation describes a measurement of the W boson mass through its decay into a muon and a neutrino using ~ 2.2 fb -1 of √ s = 1.96 TeV p$\bar{p}$ data taken with the CDF II detector at Fermilab. We measure the W boson mass to be (80.374 ± 0.015 stat . ± 0.016 syst. ) GeV/c 2 . This result, when combined with the W mass measurement in the electron channel, leads to the single most precise mW value and greatly constrains the possible mass range of the undiscovered Higgs boson. iv

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Charge Asymmetry in $W$ Boson Production in $p\bar p$ Collisions at the $\sqrt{s} = 1.96$ TeV Using the D0 Detector at the Fermilab Tevatron

We present a measurement of the W boson charge asymmetry in p $\bar{p}$ collisions using W →ev decays using 750 pb -1 of data collected with the D detector at the Fermilab Tevatron. The electron coverage is extended to |η| < 3.2 and is thus sensitive to W s generated with low and high x partons. We also measured the charge asymmetry for events with electron E T > 25 GeV, 25 < E T < 35 GeV and E T > 35 GeV. By dividing events into di erent electron E T regions, we can probe di erent W boson rapidity regions, and can provide more constraints on the parton distribution functions (PDFs). Theoretical predictions made using CTEQ6.6 and MRST2004NLO PDFs are compared with the measurement. Our measurement is the most precise W charge asymmetry measurement to date, and this single measurement is superior in precision to the combined world average of all previous W charge asymmetry measurements done at the Tevatron. The measured asymmetry errors are less than the CTEQ6.6 PDF uncertainty for most rapidity bins. The inclusion of our results will further constrain future PDF ts and improve the predictions.

43 PARTICLE ACCELERATORS↗

nuSTORM - Neutrinos from STORed Muons: Proposal to the Fermilab PAC

The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neutrino-oscillation programs by providing definitive measurements of electron neutrino and muon neutrino scattering cross sections off nuclei with percent-level precision; and 3. Constitutes the crucial first step in the development of muon accelerators as a powerful new technique for particle physics. The document describes the facility in detail and demonstrates its physics capabilities. This document was submitted to the Fermilab Physics Advisory Committee in consideration for Stage I approval.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron Cloud in Steel Beam Pipe vs Titanium Nitride Coated and Amorphous Carbon Coated Beam Pipes in Fermilab's Main Injector

This paper documents the use of four retarding field analyzers (RFAs) to measure electron cloud signals created in Fermilab’s Main Injector during 120 GeV operations. The first data set was taken from September 11, 2009 to July 4, 2010. This data set is used to compare two different types of beam pipe that were installed in the accelerator. Two RFAs were installed in a normal steel beam pipe like the rest of the Main Injector while another two were installed in a one meter section of beam pipe that was coated on the inside with titanium nitride (TiN). A second data run started on August 23, 2010 and ended on January 10, 2011 when Main Injector beam intensities were reduced thus eliminating the electron cloud. This second run uses the same RFA setup but the TiN coated beam pipe was replaced by a one meter section coated with amorphous carbon (aC). This section of beam pipe was provided by CERN in an effort to better understand how an aC coating will perform over time in an accelerator. The research consists of three basic parts: (a) continuously monitoring the conditioning of the three different types of beam pipe over both time and absorbed electrons (b) measurement of the characteristics of the surrounding magnetic fields in the Main Injector in order to better relate actual data observed in the Main Injector with that of simulations (c) measurement of the energy spectrum of the electron cloud signals using retarding field analyzers in all three types of beam pipe.

Backfish, Michael↗

Advanced Beamline Design for Fermilab's Advanced Superconducting Test Accelerator

The Advanced Superconducting Test Accelerator (ASTA) at Fermilab is a new electron accelerator currently in the commissioning stage. In addition to testing superconducting accelerating cavities for future accelerators, it is foreseen to support a variety of Advanced Accelerator R&D (AARD) experiments. Producing the required electron bunches with the expected flexibility is challenging. The goal of this dissertation is to explore via numerical simulations new accelerator beamlines that can enable the advanced manipulation of electron bunches. The work especially includes the design of a low-energy bunch compressor and a study of transverse-to-longitudinal phase space exchangers.

43 PARTICLE ACCELERATORS↗

LAr1-ND: Testing Neutrino Anomalies with Multiple LAr TPC Detectors at Fermilab

This Proposal seeks to continue the development of the short-baseline neutrino oscillation program at Fermilab with the construction of the Liquid Argon Near Detector, or LArl-ND, to be located in an existing experimental enclosure 100 m from the Booster Neutrino Beam target. The physics program will contribute, in conjunction with MicroBooNE, to the in terpretation of the MiniBooNE neutrino-mode anomaly and will enable additional tests of high-$\Delta m^2$ neutrino oscillations through both disappearance and appearance searches. Leveraging the advanced design work performed for LBNE and the very recent experience of the MicroBooNE detector construction, the LArl-ND project has the potential to move forward quickly. Due to the high event rate at the near location, significant physics output can be achieved with a relatively short run. Beyond this near-term program, LArl-ND could also serve as the near detector in a three LAr TPC experiment capable of definitively addressing the existing anomalies also in antineutrinos and making precision measurements of high-$\Delta m^2$ neutrino oscillations. In addition to the physics program, LArl-ND, following the MicroBooNE model, will have a development program serving as an engineering prototype for LAr TPCs for long baseline CP-violation searches in the future (e.g.: LBNE).

Admas, C.↗

Fermilab Test Beam Facility Annual Report. FY 2014

Fermilab Test Beam Facility (FTBF) operations are summarized for FY 2014. It is one of a series of publications intended to gather information in one place. In this case, the information concerns the individual experiments that ran at FTBF. Each experiment section was prepared by the relevant authors, and was edited for inclusion in this summary.

43 PARTICLE ACCELERATORS↗

Lattice design of the integrable optics test accelerator and optical stochastic cooling experiment at Fermilab

The Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab will serve as the backbone for a broad spectrum of Advanced Accelerator R&D (AARD) experiments, and as such, must be designed with signi cant exibility in mind, but without compromising cost e ciency. The nonlinear experiments at IOTA will include: achievement of a large nonlinear tune shift/spread without degradation of dynamic aperture; suppression of strong lattice resonances; study of stability of nonlinear systems to perturbations; and studies of di erent variants of nonlinear magnet design. The ring optics control has challenging requirements that reach or exceed the present state of the art. The development of a complete self-consistent design of the IOTA ring optics, meeting the demands of all planned AARD experiments, is presented. Of particular interest are the precise control for nonlinear integrable optics experiments and the transverse-to-longitudinal coupling and phase stability for the Optical Stochastic Cooling Experiment (OSC). Since the beam time-of- ight must be tightly controlled in the OSC section, studies of second order corrections in this section are presented.

43 PARTICLE ACCELERATORS↗

Model of E-Cloud Instability in the Fermilab Recycler

Simple model of electron cloud is developed in the paper to explain e-cloud instability of bunched proton beam in the Fermilab Recycler. The cloud is presented as an immobile snake in strong vertical magnetic field. The instability is treated as an amplification of the bunch injection errors from the batch head to its tail. Nonlinearity of the e-cloud field is taken into account. Results of calculations are compared with experimental data demonstrating good correlation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Field calculations, single-particle tracking, and beam dynamics with space charge in the electron lens for the Fermilab Integrable Optics Test Accelerator

An electron lens is planned for the Fermilab Integrable Optics Test Accelerator as a nonlinear element for integrable dynamics, as an electron cooler, and as an electron trap to study space-charge compensation in rings. We present the main design principles and constraints for nonlinear integrable optics. A magnetic configuration of the solenoids and of the toroidal section is laid out. Singleparticle tracking is used to optimize the electron path. Electron beam dynamics at high intensity is calculated with a particle-in-cell code to estimate current limits, profile distortions, and the effects on the circulating beam. In the conclusions, we summarize the main findings and list directions for further work.

43 PARTICLE ACCELERATORS↗

A Study of Particle Production in Proton Induced Collisions Using the MIPP Detector at Fermilab

The Main Injector Particle Production (MIPP) experiment is a fixed target hadron production experiment at Fermilab. MIPP is a high acceptance spectrometer which provides excellent charged particle identification using Time Projection Chamber (TPC), Time of Flight (ToF), multicell Cherenkov (Ckov), ring imaging Cherenkov (RICH) detectors, and Calorimeter for neutrons. The MIPP experiment is designed to measure particle production in interactions of 120 GeV/c primary protons from the Main Injector and secondary beams of $\pi^{\pm}, \rm{K}^{\pm}$, p and $\bar{\rm{p}}$ from 5 to 90 GeV/c on nuclear targets which include H, Be, C, Bi and U, and a dedicated run with the NuMI target. The goal of the experiment is to measure hadron production cross sections or yields using these beams and targets. These hadronic interaction data can have a direct impact on the detailed understanding of the neutrino fluxes of several accelerator-based neutrino experiments like MINOS, MINER$\nu$A, NO$\ nu$A and ELBNF. In this thesis, we present inelastic cross section measurements for 58 and 85 GeV/c p+p interactions, and 58 and 120 GeV/c p+Be, p+C and p+Bi interactions. A new method is described to account for the low multiplicity inefficiencies in the interaction trigger using KNO scaling. Inelastic cross sections as a function of multiplicity are also presented for p+H and p+C interactions at different beam momenta. The MIPP data are compared with the Monte Carlo predictions and existing data. We also describe an algorithm to identify charged particles ($\pi^{\pm}/\rm{p}/\bar{\rm{p}}$ etc.), and present the inclusive charged pion production cross sections in bins of true momentum using 58 and 120 GeV/c p+C interactions for both the data and Monte Carlo.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for the Higgs Boson and Rare Standard Model Processes in the E T +B-Jets Signature at the Collider Detector at Fermilab

We study rare processes of the standard model of particle physics (SM) in events with missing transverse energy E T , no leptons, and two or three jets, of which at least one is identified as originating from a $b$-quark (E T +b-jets signature). We present a search for the SM Higgs boson produced in association with a $W$ or $Z$ boson when the Higgs decays into \bbbar. We consider the scenario where $Z \to \nu \nu$, or $W \to l \nu$ and the lepton escapes detection. This dissertation analyzes $7.8~\mbox{fb$^{-1}$}$ of data collected by the CDF~II experiment at Fermilab. For the first time, we analyze events with \emph{relaxed kinematic} requirements, yielding an increase of 30- 40\% in acceptance to the $WH/ZH$ signal. We collect events from three different triggers and parametrize the efficiency of their logical combination (OR) using a novel artificial neural network ($NN$) technique. To increase the sensitivity to the signal, we implement a $NN$ to remove the huge instrumental background. An additional $NN$ is used to discriminate the Higgs signal from the remaining background. We check our background modeling by comparing data against backgrounds in many control regions, and find good agreement. Observing no significant excess in the data, we place 95\% confidence level (C.L.) upper limits on the Higgs boson production cross section. For a mass of $115~\mbox{GeV/$c^2$}$ the expected (observed) limit is $2.9$ ($2.3$) times the standard model prediction. Compared to the last iteration of this analysis, this result improves the significance by 10\% throughout the $100-150~\mbox{GeV/$c^2$}$ mass range. This is one of the most sensitive at the Tevatron in this mass range. We cross-check the tools developed in this dissertation by measuring the cross-section of top pair, electroweak single top and diboson ($WZ+ZZ$) production.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fermilab Testbeam Facility Annual Report – FY 2015

This Technical Memorandum (TM) summarizes the Fermilab Test Beam operations for FY 2015. It is one of a series of annual publications intended to gather information in one place. In this case, the information concerns the individual experiments that ran at FTBF and are listed in Table TB-1. Each experiment section was prepared by the relevant authors, and was edited for inclusion in this summary.

43 PARTICLE ACCELERATORS↗

Beam Position Monitor and Energy Analysis at the Fermilab Accelerator Science and Technology Facility

Fermilab Accelerator Science and Technology Facility has produced its first beam with an energy of 20 MeV. This energy is obtained by the acceleration at the Electron Gun and the Capture Cavity 2 (CC2). When fully completed, the accelerator will consist of a photoinjector, one International Liner Collider (ILC)-type cryomodule, multiple accelerator R&D beamlines, and a downstream beamline to inject 300 MeV electrons into the Integrable Optics Test Accelerator (IOTA). We calculated the total energy of the beam and the corresponding energy to the Electron Gun and CC2. Subsequently, a Beam Position Monitors (BPM) error analysis was done, to calculate the device actual resolution.

43 PARTICLE ACCELERATORS↗