Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Territorial characteristics of low frequency electrostatic fluctuations in a simple magnetized torus

This paper presents an experimental investigation of turbulence in simple toroidal plasma devices without rotational transform. It is argued that Rayleigh-Taylor (flute interchange) mode may be one of the source mechanisms for the observed turbulence but is not sufficient to explain its observed global characteristics. Taking BETA device as an example, we show that pure Rayleigh-Taylor mode cannot explain (i) the observation of mode maximum at the location other than where density scale length is minimum, (ii) the comparable value of amplitude level of fluctuations in good curvature region, and (iii) the decrease in the mode amplitude with increasing magnetic field. Investigations have revealed that there exists not only poloidal plasma flow but also that it is sheared. Including this effect explains the first observation. However, modification brought about by velocity shear in the Rayleigh-Taylor mode still does not explain our second and third observations. We have taken an approach that since Rayleigh-Taylor is not excited in a good curvature region, it cannot be the source of turbulence there. Nor is it defensible to say that turbulence born in a bad curvature region is carried over through ExB rotation to the good curvature region. Consequently, we have invoked cross-field Simon-Hoh instability for this region. Experimental evidence supporting our proposal is presented. This paper concludes that toroidal devices have simultaneous existence of different self-consistent sources of turbulence in different regions of the device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MICROSTRUCTURE OF THE HELIOSPHERIC TERMINATION SHOCK: IMPLICATIONS FOR ENERGETIC NEUTRAL ATOM OBSERVATIONS

The Voyager 2 plasma observations of the proton distribution function downstream of the quasi-perpendicular heliospheric termination shock (TS) showed that upstream thermal solar wind ions played little role in the shock dissipation mechanism, being essentially transmitted directly through the shock. Instead, the hot supra-thermal pickup ion (PUI) component is most likely responsible for the dissipation at the TS. Consequently, the downstream proton distribution function will be a complicated superposition of relatively cool thermal solar wind protons and hot PUIs that have experienced either direct transmission or reflection at the TS cross-shock potential. We develop a simple model for the TS microstructure that allows us to construct approximate proton distribution functions for the inner heliosheath. The distribution function models are compared to kappa-distributions, showing the correspondence between the two. Since the interpretation of energetic neutral atom (ENA) fluxes measured at 1 AU by IBEX will depend sensitively on the form of the underlying proton distribution function, we use a three-dimensional MHD-kinetic global model to model ENA spectra at 1 AU and ENA skymaps across the IBEX energy range. We consider both solar minimum and solar maximum-like global models, showing how ENA skymap structure can be related to global heliospheric structure. We suggest that the ENA spectra may allow us to probe the directly the microphysics of the TS, while the ENA skymaps reveal heliospheric structure and, at certain energies, are distinctly different during solar minimum and maximum.

79 ASTRONOMY AND ASTROPHYSICS↗

THE EFFECT OF THE RADIAL PRESSURE GRADIENT IN PROTOPLANETARY DISKS ON PLANETESIMAL FORMATION

The streaming instability provides a promising mechanism for planetesimal formation because of its ability to concentrate solids into dense clumps. The degree of clumping strongly depends on the height-integrated solid to gas mass ratio Z in protoplanetary disks. In this Letter, we show that the magnitude of the radial pressure gradient that drives the streaming instability (characterized by {Pi} {identical_to} {eta}v{sub K} /c{sub s} , where {eta}v{sub K} is the reduction of Keplerian velocity due to the radial pressure gradient and c{sub s} is the sound speed) also strongly affects clumping. We present local two-dimensional hybrid numerical simulations of aerodynamically coupled particles and gas in the midplane of protoplanetary disks. Magnetic fields and particle self-gravity are ignored. We explore three different radial pressure gradient values appropriate for typical protoplanetary disks: {Pi} = 0.025, 0.05, and 0.1. For each {Pi} value, we consider four different particle size distributions ranging from submillimeter to meter sizes and run simulations with solid abundance from Z = 0.01 up to Z = 0.07. We find that a small radial pressure gradient strongly promotes particle clumping in that: (1) at fixed particle size distribution, the critical solid abundance Z {sub crit} above which particle clumping occurs monotonically increases with {Pi} and (2) at fixed Z, strong clumping can occur for smaller particles when {Pi} is smaller. Therefore, we expect planetesimals to form preferentially in regions of protoplanetary disks with a small radial pressure gradient.

79 ASTRONOMY AND ASTROPHYSICS↗

TYPE Ia SUPERNOVAE AS SITES OF THE p-PROCESS: TWO-DIMENSIONAL MODELS COUPLED TO NUCLEOSYNTHESIS

Beyond Fe, there is a class of 35 proton-rich nuclides, between {sup 74}Se and {sup 196}Hg, called p-nuclei. They are bypassed by the s and r neutron capture processes and are typically 10-1000 times less abundant than the s- and/or r-isotopes in the solar system. The bulk of p-isotopes is created in the 'gamma processes' by sequences of photodisintegrations and beta decays in explosive conditions in both core collapse supernovae (SNe II) and in Type Ia supernovae (SNe Ia). SNe II contribute to the production of p-nuclei through explosive neon and oxygen burning. However, the major problem in SN II ejecta is a general underproduction of the light p-nuclei for A < 120. We explore SNe Ia as p-process sites in the framework of a two-dimensional SN Ia delayed detonation model as well as pure deflagration models. The white dwarf precursor is assumed to have reached the Chandrasekhar mass in a binary system by mass accretion from a giant/main-sequence companion. We use enhanced s-seed distributions, with seeds directly obtained from a sequence of thermal pulse instabilities both in the asymptotic giant branch phase and in the accreted material. We apply the tracer-particle method to reconstruct the nucleosynthesis by the thermal histories of Lagrangian particles, passively advected in the hydrodynamic calculations. For each particle, we follow the explosive nucleosynthesis with a detailed nuclear reaction network for all isotopes up to {sup 209}Bi. We select tracers within the typical temperature range for p-process production, (1.5-3.7) x 10{sup 9} K, and analyze in detail their behavior, exploring the influence of different s-process distributions on the p-process nucleosynthesis. In addition, we discuss the sensitivity of p-process production to parameters of the explosion mechanism, taking into account the consequences on Fe and alpha elements. We find that SNe Ia can produce a large amount of p-nuclei, both the light p-nuclei below A = 120 and the heavy-p nuclei, at quite flat average production factors, tightly related to the s-process seed distribution. For the first time, we find a stellar source able to produce both light and heavy p-nuclei almost at the same level as {sup 56}Fe, including the debated neutron magic {sup 92,} {sup 94}Mo and {sup 96,} {sup 98}Ru. We also find that there is an important contribution from the p-process nucleosynthesis to the s-only nuclei {sup 80}Kr, {sup 86}Sr, to the neutron magic {sup 90}Zr, and to the neutron-rich {sup 96}Zr. Finally, we investigate the metallicity effect on p-process production in our models. Starting with different s-process seed distributions for two metallicities Z = 0.02 and Z = 0.001, running two-dimensional SN Ia models with different initial composition, we estimate that SNe Ia can contribute to at least 50% of the solar p-process composition. A more detailed analysis of the role of SNe Ia in Galactic chemical evolution of p-nuclei is in preparation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A MAGNETIC RECONNECTION MECHANISM FOR THE GENERATION OF ANOMALOUS COSMIC RAYS

The recent observations of the anomalous cosmic ray (ACR) energy spectrum as Voyager 1 and Voyager 2 crossed the heliospheric termination shock have called into question the conventional shock source of these energetic particles. We suggest that the sectored heliospheric magnetic field, which results from the flapping of the heliospheric current sheet, piles up as it approaches the heliopause, narrowing the current sheets that separate the sectors and triggering the onset of collisionless magnetic reconnection. Particle-in-cell simulations reveal that most of the magnetic energy is released and most of this energy goes into energetic ions with significant but smaller amounts of energy going into electrons. The energy gain of the most energetic ions results from their reflection from the ends of contracting magnetic islands, a first-order Fermi process. The energy gain of the ions in contracting islands increases their parallel (to the magnetic field B) pressure p{sub ||} until the marginal fire-hose condition is reached, causing magnetic reconnection and associated particle acceleration to shut down. Thus, the feedback of the self-consistent development of the energetic ion pressure on reconnection is a crucial element of any reconnection-based, particle-acceleration model. The model calls into question the strong scattering assumption used to derive the Parker transport equation and therefore the absence of first-order Fermi acceleration in incompressible flows. A simple one-dimensional model for particle energy gain and loss is presented in which the feedback of the energetic particles on the reconnection drive is included. The ACR differential energy spectrum takes the form of a power law with a spectral index slightly above 1.5. The model has the potential to explain several key Voyager observations, including the similarities in the spectra of different ion species.

79 ASTRONOMY AND ASTROPHYSICS↗

DIMENSION AS A KEY TO THE NEUTRINO MECHANISM OF CORE-COLLAPSE SUPERNOVA EXPLOSIONS

We explore the dependence on spatial dimension of the viability of the neutrino heating mechanism of core-collapse supernova explosions. We find that the tendency to explode is a monotonically increasing function of dimension, with three dimensions (3D) requiring {approx}40%-50% lower driving neutrino luminosity than one dimension and {approx}15%-25% lower driving neutrino luminosity than two dimensions (2D). Moreover, we find that the delay to explosion for a given neutrino luminosity is always shorter in 3D than 2D, sometimes by many hundreds of milliseconds. The magnitude of this dimensional effect is much larger than the purported magnitude of a variety of other effects, such as nuclear burning, inelastic scattering, or general relativity, which are sometimes invoked to bridge the gap between the current ambiguous and uncertain theoretical situation and the fact of robust supernova explosions. Since real supernovae occur in three dimensions, our finding may be an important step toward unraveling one of the most problematic puzzles in stellar astrophysics. In addition, even though in 3D, we do see pre-explosion instabilities and blast asymmetries, unlike the situation in 2D, we do not see an obvious axially symmetric dipolar shock oscillation. Rather, the free energy available to power instabilities seems to be shared by more and more degrees of freedom as the dimension increases. Hence, the strong dipolar axisymmetry seen in 2D and previously identified as a fundamental characteristic of the shock hydrodynamics may not survive in 3D as a prominent feature.

79 ASTRONOMY AND ASTROPHYSICS↗

Improved Characterization and Modeling of Tight Oil Formations for CO 2 Enhanced Oil Recovery Potential and Storage Capacity Estimation

Tight oil formations such as those in the Bakken petroleum system are known to hold hundreds of billions of barrels of oil in place; however, the primary recovery factor for these plays is typically less than 10%. Tight oil formations, including the Bakken Formation, therefore, may be attractive candidates for enhanced oil recovery (EOR) using CO 2 . Multiphase fluid behavior and flow in fluid-rich shales can vary substantially depending on the size of pore throats, and properties such as fluid viscosity and density are much different in nanoscale pores than in macroscale pores. Thus it is critical to understand the nature and distribution of nano-, micro-, and macroscale pores and fracture networks. To address these issues, the Energy & Environmental Research Center (EERC) has been conducting a research program entitled “Improved Characterization and Modeling of Tight Oil Formations for CO 2 Enhanced Oil Recovery Potential and Storage Capacity Estimation.” The objectives of the project are 1) the use of advanced characterization methods to better understand and quantify the petrophysical and geomechanical factors that control CO 2 and oil mobility within tight oil formation samples, 2) the determination of CO 2 permeation and oil extraction rates in tight reservoir rocks and organic-rich shales of the Bakken, and 3) the integration of the laboratory-based CO 2 permeation and oil extraction data and the characterization data into geologic models and dynamic simulations to develop predictions of CO 2 storage resource and EOR in the Bakken tight oil formation. A combination of standard and advanced petrophysical characterization techniques were applied to characterize samples of Bakken Formation tight reservoir rock and shales from multiple wells. Techniques included advanced computer tomography (CT) imaging, scanning electron microscopy (SEM) techniques, whole-core and micro x-ray CT imaging, field emission (FE) SEM, and focused ion beam (FIB) SEM. Selected samples were also analyzed for geomechanical properties. X-ray CT imaging yielded information on the occurrence of fractures, bedding planes, fossils, and bioturbation in core, as well as data on bulk density and photoelectric factor logs, which were used to interpret porosity, organic content, and mineralogy. FESEM was used for characterization of nano- and microscale features, including nanoscale pore visualization and micropore and pore throat mineralogy. FIBSEM yielded micro- to nanoscale visualization of fracture networks, porosity and pore-size distribution, connected versus isolated porosity, and distribution of organics. Results from the characterization activities provide insight on nanoscale fracture properties, pore throat mineralogy and connectivity, rock matrix characteristics, mineralogy, and organic content. Laboratory experiments demonstrated that CO 2 can permeate the tight matrix of Bakken shale and nonshale reservoir samples and mobilize oil from those samples. Geologic models were created at scales ranging from the core plug to the reservoir, and dynamic simulations were conducted. The data from the characterization and laboratory-based activities were integrated into modeling research activities to determine the fundamental mechanisms controlling fluid transport in the Bakken, which support EOR scheme design and estimation of CO 2 storage potential in tight oil formations. Simulation results suggest a CO 2 storage resource estimate range of 169 million to 1.5 billion tonnes for the Bakken in North Dakota, possibly resulting in 1.8 billion to 16 billion barrels of incremental oil.

04 OIL SHALES AND TAR SANDS↗

GLOBAL SELF-SIMILAR PROTOSTELLAR DISK/WIND MODELS

The magnetocentrifugal disk wind mechanism is the leading candidate for producing the large-scale, bipolar jets commonly seen in protostellar systems. I present a detailed formulation of a global, radially self-similar model for a non-ideal disk that launches a magnetocentrifugal wind. This formulation generalizes the conductivity tensor formalism previously used in radially localized disk models. The model involves matching a solution of the equations of non-ideal magnetohydrodynamics (MHD) describing matter in the disk to a solution of the equations of ideal MHD describing a 'cold' wind. The disk solution must pass smoothly through the sonic point, the wind solution must pass smoothly through the Alfven point, and the two solutions must match at the disk/wind interface. This model includes for the first time a self-consistent treatment of the evolution of magnetic flux threading the disk, which can change on the disk accretion timescale. The formulation presented here also allows a realistic conductivity profile for the disk to be used in a global disk/wind model for the first time. The physical constraints on the model solutions fix the distribution of the magnetic field threading the disk, the midplane accretion speed, and the midplane migration speed of flux surfaces. I present a representative solution that corresponds to a disk in the ambipolar conductivity regime with a nominal neutral-matter-magnetic-field coupling parameter that is constant along field lines, matched to a wind solution. I conclude with a brief discussion of the importance of self-similar disk/wind models in studying global processes such as dust evolution in protostellar systems.

79 ASTRONOMY AND ASTROPHYSICS↗

PROBING NEARBY COSMIC-RAY ACCELERATORS AND INTERSTELLAR MEDIUM TURBULENCE WITH MILAGRO HOT SPOTS

Both the acceleration of cosmic rays (CRs) in supernova remnant shocks and their subsequent propagation through the random magnetic field of the Galaxy are deemed to result in an almost isotropic CR spectrum. However, the MILAGRO TeV observatory discovered sharp ({approx}10{sup 0}) arrival anisotropies of CR nuclei. We suggest a mechanism for producing a weak and narrow CR beam which operates en route to the observer. The key assumption is that CRs are scattered by a strongly anisotropic Alfven wave spectrum formed by the turbulent cascade across the local field direction. The strongest pitch-angle scattering occurs for particles moving almost precisely along the field line. Partly because this direction is also the direction of the minimum of the large-scale CR angular distribution, the enhanced scattering results in a weak but narrow particle excess. The width, the fractional excess, and the maximum momentum of the beam are calculated from a systematic transport theory depending on a single scale l which can be associated with the longest Alfven wave, which efficiently scatters the beam. The best match to all three characteristics of the beam is achieved at l {approx} 1 pc. The distance to a possible source of the beam is estimated to be within a few 100 pc. Possible approaches to the determination of the scale l from the characteristics of the source are discussed. Alternative scenarios of drawing the beam from the galactic CR background are considered. The beam-related large-scale anisotropic CR component is found to be energy independent, which is also consistent with the observations.

79 ASTRONOMY AND ASTROPHYSICS↗

EXPLOSIVE NUCLEOSYNTHESIS IN THE NEUTRINO-DRIVEN ASPHERICAL SUPERNOVA EXPLOSION OF A NON-ROTATING 15 M{sub sun} STAR WITH SOLAR METALLICITY

We investigate explosive nucleosynthesis in a non-rotating 15 M{sub sun} star with solar metallicity that explodes by a neutrino-heating supernova (SN) mechanism aided by both standing accretion shock instability (SASI) and convection. To trigger explosions in our two-dimensional hydrodynamic simulations, we approximate the neutrino transport with a simple light-bulb scheme and systematically change the neutrino fluxes emitted from the protoneutron star. By a post-processing calculation, we evaluate abundances and masses of the SN ejecta for nuclei with a mass number {<=}70, employing a large nuclear reaction network. Aspherical abundance distributions, which are observed in nearby core-collapse SN remnants, are obtained for the non-rotating spherically symmetric progenitor, due to the growth of a low-mode SASI. The abundance pattern of the SN ejecta is similar to that of the solar system for models whose masses range between (0.4-0.5) M{sub sun} of the ejecta from the inner region ({<=}10, 000 km) of the precollapse core. For the models, the explosion energies and the {sup 56}Ni masses are {approx_equal} 10{sup 51}erg and (0.05-0.06) M{sub sun}, respectively; their estimated baryonic masses of the neutron star are comparable to the ones observed in neutron-star binaries. These findings may have little uncertainty because most of the ejecta is composed of matter that is heated via the shock wave and has relatively definite abundances. The abundance ratios for Ne, Mg, Si, and Fe observed in the Cygnus loop are reproduced well with the SN ejecta from an inner region of the 15 M{sub sun} progenitor.

79 ASTRONOMY AND ASTROPHYSICS↗

Structures and Zonal Flows in Magnetized Plasmas

The numerical study of the zonal flows (transport barriers) in the drift-wave turbulence in magnetically confined plasmas is presented. The existence of two distinct mechanisms for their generation is demonstrated. The evolution of a drift wave-zonal flow system, nonlinearly coupled via the Reynolds stress, is described by a nonlinear equation for the slowly varying envelope of the drift waves, and the nonlinear dispersion relation for the modulational instability of a drift wave pump is derived and analyzed. First, an arbitrary spatial distribution of strictly poloidally propagating drift waves is shown to rapidly decay into the array of localized soliton-like structures moving with different speeds. The corresponding zonal flow potential evolves into the sequence of shocks that produces a strong shearing, with many alternating plasma flows. Next, it is demonstrated that the coherent dipolar vortices, that constitute the building blocks of the strong drift-wave turbulence, are unstable in the presence of an electron temperature gradient. The dipolar vortices (or modons) undergo a qualitative modification by the action of the scalar nonlinearity arising from the magnetic {beta} effect. The modons propagating in the direction of the electron diamagnetic drift rapidly topple, disintegrating into two monopoles that propagate independently and rapidly disperse. Conversely, for the modons that initially moved in the direction of the ion diamagnetic drift, the {beta}-effect produces the change of the direction of the propagation, followed by the stretching in the poloidal direction. On a long time scale, such modons expand to a length equal to the size of the computational box, and essentially an one-dimensional zonal flow is created, whose transverse scale is determined by the initial modon size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FORMATION OF TORUS-UNSTABLE FLUX ROPES AND ELECTRIC CURRENTS IN ERUPTING SIGMOIDS

We analyze the physical mechanisms that form a three-dimensional coronal flux rope and later cause its eruption. This is achieved by a zero-beta magnetohydrodynamic (MHD) simulation of an initially potential, asymmetric bipolar field, which evolves by means of simultaneous slow magnetic field diffusion and sub-Alfvenic, line-tied shearing motions in the photosphere. As in similar models, flux-cancellation-driven photospheric reconnection in a bald-patch (BP) separatrix transforms the sheared arcades into a slowly rising and stable flux rope. A bifurcation from a BP to a quasi-separatrix layer (QSL) topology occurs later on in the evolution, while the flux rope keeps growing and slowly rising, now due to shear-driven coronal slip-running reconnection, which is of tether-cutting type and takes place in the QSL. As the flux rope reaches the altitude at which the decay index -partial derivln B/partial derivln z of the potential field exceeds approx3/2, it rapidly accelerates upward, while the overlying arcade eventually develops an inverse tear-drop shape, as observed in coronal mass ejections (CMEs). This transition to eruption is in accordance with the onset criterion of the torus instability. Thus, we find that photospheric flux-cancellation and tether-cutting coronal reconnection do not trigger CMEs in bipolar magnetic fields, but are key pre-eruptive mechanisms for flux ropes to build up and to rise to the critical height above the photosphere at which the torus instability causes the eruption. In order to interpret recent Hinode X-Ray Telescope observations of an erupting sigmoid, we produce simplified synthetic soft X-ray images from the distribution of the electric currents in the simulation. We find that a bright sigmoidal envelope is formed by pairs of J-shaped field lines in the pre-eruptive stage. These field lines form through the BP reconnection and merge later on into S-shaped loops through the tether-cutting reconnection. During the eruption, the central part of the sigmoid brightens due to the formation of a vertical current layer in the wake of the erupting flux rope. Slip-running reconnection in this layer yields the formation of flare loops. A rapid decrease of currents due to field line expansion, together with the increase of narrow currents in the reconnecting QSL, yields the sigmoid hooks to thin in the early stages of the eruption. Finally, a slightly rotating erupting loop-like feature (ELLF) detaches from the center of the sigmoid. Most of this ELLF is not associated with the erupting flux rope, but with a current shell that develops within expanding field lines above the rope. Only the short, curved end of the ELLF corresponds to a part of the flux rope. We argue that the features found in the simulation are generic for the formation and eruption of soft X-ray sigmoids.

79 ASTRONOMY AND ASTROPHYSICS↗

FREEZE-OUT YIELDS OF RADIOACTIVITIES IN CORE-COLLAPSE SUPERNOVAE

We explore the nucleosynthesis trends from two mechanisms during freeze-out expansions in core-collapse supernovae. The first mechanism is related to the convection and instabilities within homogeneous stellar progenitor matter that is accreted through the supernova shock. The second mechanism is related to the impact of the supersonic wind termination shock (reverse shock) within the tumultuous inner regions of the ejecta above the proto-neutron star. Our results suggest that isotopes in the mass range 12 {<=} A {<=} 122 that are produced during the freeze-out expansions may be classified in two families. The isotopes of the first family manifest a common mass fraction evolutionary profile, whose specific shape per isotope depends on the characteristic transition between two equilibrium states (equilibrium state transition) during each type of freeze-out expansion. The first family includes the majority of isotopes in this mass range. The second family is limited to magic nuclei and isotopes in their locality, which do not sustain any transition, become nuclear flow hubs, and dominate the final composition. We use exponential and power-law adiabatic profiles to identify dynamic large-scale and small-scale equilibrium patterns among nuclear reactions. A reaction rate sensitivity study identifies those reactions that are crucial to the synthesis of radioactivities in the mass range of interest. In addition, we introduce non-monotonic parameterized profiles to probe the impact of the reverse shock and multi-dimensional explosion asymmetries on nucleosynthesis. Cases are shown in which the non-monotonic profiles favor the production of radioactivities. Non-monotonic freeze-out profiles involve longer non-equilibrium nucleosynthesis intervals compared with the exponential and power-law profiles, resulting in mass fraction trends and yield distributions that may not be achieved by the monotonic freeze-out profiles.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

FORMING PLANETESIMALS BY GRAVITATIONAL INSTABILITY. I. THE ROLE OF THE RICHARDSON NUMBER IN TRIGGERING THE KELVIN-HELMHOLTZ INSTABILITY

Gravitational instability (GI) of a dust-rich layer at the midplane of a gaseous circumstellar disk is one proposed mechanism to form planetesimals, the building blocks of rocky planets and gas giant cores. Self-gravity competes against the Kelvin-Helmholtz instability (KHI): gradients in dust content drive a vertical shear which risks overturning the dusty subdisk and forestalling GI. To understand the conditions under which the disk can resist the KHI, we perform three-dimensional simulations of stratified subdisks in the limit that dust particles are small and aerodynamically well coupled to gas, thereby screening out the streaming instability and isolating the KHI. Each subdisk is assumed to have a vertical density profile given by a spatially constant Richardson number Ri. We vary Ri and the midplane dust-to-gas ratio {mu}{sub 0} and find that the critical Richardson number dividing KH-unstable from KH-stable flows is not unique; rather, Ri{sub crit} grows nearly linearly with {mu}{sub 0} for {mu}{sub 0} = 0.3-10. Plausibly, a linear dependence arises for {mu}{sub 0} << 1 because in this regime the radial Kepler shear replaces vertical buoyancy as the dominant stabilizing influence. Why this dependence should persist at {mu}{sub 0} > 1 is a new puzzle. The bulk (height-integrated) metallicity is uniquely determined by Ri and {mu}{sub 0}. Only for disks of bulk solar metallicity is Ri{sub crit} {approx} 0.2, which is close to the classical value. Our empirical stability boundary is such that a dusty sublayer can gravitationally fragment and presumably spawn planetesimals if embedded within a solar metallicity gas disk {approx}4x more massive than the minimum-mass solar nebula; or a minimum-mass disk having {approx}3x solar metallicity; or some intermediate combination of these two possibilities. Gravitational instability seems possible without resorting to the streaming instability or to turbulent concentration of particles.

79 ASTRONOMY AND ASTROPHYSICS↗

NUCLEOSYNTHESIS IN TWO-DIMENSIONAL DELAYED DETONATION MODELS OF TYPE Ia SUPERNOVA EXPLOSIONS

For the explosion mechanism of Type Ia supernovae (SNe Ia), different scenarios have been suggested. In these, the propagation of the burning front through the exploding white dwarf (WD) star proceeds in different modes, and consequently imprints of the explosion model on the nucleosynthetic yields can be expected. The nucleosynthetic characteristics of various explosion mechanisms are explored based on three two-dimensional explosion simulations representing extreme cases: a pure turbulent deflagration, a delayed detonation following an approximately spherical ignition of the initial deflagration, and a delayed detonation arising from a highly asymmetric deflagration ignition. Apart from this initial condition, the deflagration stage is treated in a parameter-free approach. The detonation is initiated when the turbulent burning enters the distributed burning regime. This occurs at densities around 10{sup 7} g cm{sup -3}-relatively low as compared to existing nucleosynthesis studies for one-dimensional spherically symmetric models. The burning in these multidimensional models is different from that in one-dimensional simulations as the detonation wave propagates both into unburned material in the high-density region near the center of a WD and into the low-density region near the surface. Thus, the resulting yield is a mixture of different explosive burning products, from carbon-burning products at low densities to complete silicon-burning products at the highest densities, as well as electron-capture products synthesized at the deflagration stage. Detailed calculations of the nucleosynthesis in all three models are presented. In contrast to the deflagration model, the delayed detonations produce a characteristic layered structure and the yields largely satisfy constraints from Galactic chemical evolution. In the asymmetric delayed detonation model, the region filled with electron capture species (e.g., {sup 58}Ni, {sup 54}Fe) is within a shell, showing a large off-set, above the bulk of {sup 56}Ni distribution, while species produced by the detonation are distributed more spherically.

79 ASTRONOMY AND ASTROPHYSICS↗

Stress Birth and Death: Disruptive Computational Mechanics and Novel Diagnostics for Fluid-to-Solid Transitions

Many materials of interest to Sandia transition from fluid to solid or have regions of both phases coexisting simultaneously. Currently there are, unfortunately, no material models that can accurately predict this material response. This is relevant to applications that "birth stress" related to geoscience, nuclear safety, manufacturing, energy production and bioscience. Accurately capturing solidification and residual stress enables fully predictive simulations of the evolving front shape or final product. Accurately resolving flow of proppants or blood could reduce environmental impact or lead to better treatments for heart attacks, thrombosis, or aneurism. We will address a science question in this proposal: When does residual stress develop during the critical transition from liquid to solid and how does it affect material deformation? Our hypothesis is that these early phases of stress development are critical to predictive simulation of material performance, net shape, and aging. In this project, we use advanced constitutive models with yield stress to represent both fluid and solid behavior simultaneously. The report provides an abbreviated description of the results from our LDRD "Stress Birth and Death: Disruptive Computational Mechanics and Novel Diagnostics for Fluid-to-Solid Transitions," since we have written four papers that document the work in detail and which we reference. We give highlights of the work and describe the gravitationally driven flow visualization experiment on a model yield stress fluid, Carbopol, at various concentrations and flow rates. We were able to collapse the data on a single master curve by showing it was self-similar. We also describe the Carbopol rheology and the constitutive equations of interest including the Bingham-Carreau-Yasuda model, the Saramito model, and the HB-Saramito model including parameter estimation for the shear and oscillatory rheology. We present several computational models including the 3D moving mesh simulations of both the Saramito models and Bingham-Carreau-Yasuda (BCY) model. We also show results from the BCY model using a 3D level set method and two different ways of handling reduced order Hele-Shaw modeling for generalized Newtonian fluids. We present some first ever two-dimensional results for the modified Jeffries Kamani-Donley-Rogers constitutive equation developed during this project. We include some recent results with a successful Saramito-level set coupling that allows us to tackle problems with complex geometries like mold filling in a thin gap with an obstacle, without the need for remeshing or remapping. We report on some experiments for curing systems where fluorescent particles are used to track material flow. These experiments were carried out in an oven on Sylgard 184 as a model polymerizing system. We conclude the report with a summary of accomplishments and some thoughts on follow-on work.

36 MATERIALS SCIENCE↗

NUMERICAL STUDY OF TURBULENT MIXING LAYERS WITH NON-EQUILIBRIUM IONIZATION CALCULATIONS

Highly ionized species, such as C IV, N V, and O VI, are commonly observed in diffuse gas in various places in the universe, such as in our Galaxy's disk and halo, high velocity clouds (HVCs), external galaxies, and the intergalactic medium. These ions are often used to trace hot gas whose temperature is a few times 10{sup 5} K. One possible mechanism for producing high ions is turbulent mixing of cool gas (such as that in a high or intermediate velocity cloud) with hotter (a few times 10{sup 6} K) gas in locations where these gases slide past each other. By using hydrodynamic simulations with radiative cooling and non-equilibrium ionization (NEI) calculations, we investigate the physical properties of turbulent mixing layers and the production of high ions (C IV, N V, and O VI). We find that most of the mixing occurs on the hot side of the hot/cool interface, where denser cool gas is entrained and mixed into the hotter, more diffuse gas. Our simulations reveal that the mixed region separates into a tepid zone containing radiatively cooled, C IV-rich gas and a hotter zone which is rich in C IV, N V, and O VI. The hotter zone contains a mixture of low and intermediate ions contributed by the cool gas and intermediate and high-stage ions contributed by the hot gas. Mixing occurs faster than ionization or recombination, making the mixed gas a better source of C IV, N V, and O VI in our NEI simulations than in our collisional ionization equilibrium (CIE) simulations. In addition, the gas radiatively cools faster than the ions recombine, which also allows large numbers of C IV, N V, and O VI ions to linger in the NEI simulations. For these reasons, our NEI calculations predict more C IV, N V, and O VI than our CIE calculations predict. We also simulate various initial configurations and find that more C IV is produced when the shear speed is smaller or the hot gas has a higher temperature. We find no significant differences between simulations having different perturbation amplitudes in the initial boundary between the hot and cool gas. We discuss the results of our simulations, compare them with observations of the Galactic halo and highly ionized HVCs, and compare them with other models, including other turbulent mixing calculations. The ratios of C IV to N V and N V to O VI are in reasonable agreement with the averages calculated from observations of the halo. There is a great deal of variation from sightline to sightline and with time in our simulations. Such spatial and temporal variation may explain some of the variation seen among observations.

79 ASTRONOMY AND ASTROPHYSICS↗

NFPA's Hydrogen Technologies Code Project

This article discusses the development of National Fire Protection Association 2 (NFPA), a comprehensive hydrogen safety code. It analyses the contents of this document with particular attention focused on new requirements for setting hydrogen storage systems. These new requirements use computational fluid dynamic modeling and risk assessment procedures to develop requirements that are based on both technical analyses and defined risk criteria. The intent is to develop requirements based on procedures that can be replicated based on the information provided in the code document. This code will require documentation of the modeling inputs and risk criteria and analyses in the supporting information. This article also includes a description of the codes and standards that address hydrogen technologies in general.

08 HYDROGEN↗