Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FAILURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Failure stress comparison of different pairings of Ag-plating and reflow-oven-processed pressureless-sintered-Ag interconnects

Here, sintered-silver is a candidate material to supplant solders for interconnects in power electronic packaging for many reasons including its desirably high electrical and thermal conductivities and compliance to Restriction of Hazardous Substances (RoHS) guidelines. The shear failure stress of interconnects though is limited by whatever constituent is the weakest, and that includes any employed plating. In the present study, silver-platings were processed electrolytically, electrolessly, and through sputter deposition and their influence on the entire “interconnect system” shear strength was examined. Test sets employing gold plating and no plating were included for comparison and to aid interpretation. Ambient-air, reflow-oven-processed, pressureless-sintered-silver interconnects were identically fabricated with all plating test sets. It was found that all considered silver-plating methods produced consistently strong (characteristic failure stresses > 55 MPa) sintered-silver interconnects. Because failures tended to be adhesive in all six sets, differences in failure stress among the silver-plated sets and the gold-plated or unplated sets were likely due to differences in the adhesive strength of the sintered silver with silver-plating, gold-plating, or direct bonding with copper.

36 MATERIALS SCIENCE↗

Microstructure-Based Constitutive Modeling of TRIP Steel: Prediction of Ductility and Failure Modes under Different Loading Conditions

In this study, an advanced micromechanics-based finite element model is developed based on the actual microstructure of a TRIP (TRansformation-Induced Plasticity) 800 steel to model complex deformation behavior of TRIP steels, including its ductile failure behaviors. The evolution of volume fraction of retained austenite during loading and the mechanical properties of the constituent phases of the TRIP 800 steel are obtained from the synchrotron-based in-situ high-energy X-ray diffraction (HEXRD) experiments and a self-consistent (SC) model. The ductile failure of the TRIP 800 under different loading conditions is predicted in the form of plastic strain localization without any prescribed failure criteria for the individual phases. The computational results suggest that the response of the microstructure-based representative volume element (RVE) well represents the overall macroscopic behavior of the deformed TRIP 800 steel under different loading and boundary conditions. The methodology described in this study may be extended for studying the ultimate ductile failure mechanisms of TRIP steels as well as the effects of the various processing parameters on the macroscopic behaviors of TRIP steels.

36 MATERIALS SCIENCE↗

Anisotropic spall failure of additively manufactured 316L stainless steel

The dynamic high strain rate tensile (spall) failure of additively manufactured (AM) materials is an area of great interest but much less understood than material failure under other loading regimes. The research presented here examines the effects of microstructure anisotropy in 316L stainless steel fabricated by laser powder bed fusion (LPBF) on its spall failure and properties. In this work, plate-on-plate impact experiments were performed using an 80-mm gas gun to investigate the spall behavior of AM fabricated sample discs with impact along the perpendicular and parallel orientations relative to build directions. Experiments were also performed on wrought 316L stainless steel as baseline material with uniform equiaxed grain microstructure for comparison with the AM material of same composition. The spall experiments involved free-surface velocity profiles measured using Photon Doppler Velocimetry (PDV) to capture the spall pull-back signals, combined with post-mortem analysis of the microstructure of soft-recovered impacted samples. In the case of AM samples, spall failure initiated preferentially at melt pool boundaries in both impact directions. The spall plane location and spall strength, however, were both heavily influenced by the orientation of the impact direction relative to the build direction in the AM samples. The spall behavior is also observed to be more complex in the samples impacted perpendicular to the build (through-thickness) direction, due in large part to the orientation of the microstructural features such as melt pool boundaries, laser scan tracks, and general grain morphology.

36 MATERIALS SCIENCE↗

Deconvoluting sources of failure in lithium metal batteries containing NMC and PEO-based electrolytes

Solid-state lithium metal batteries (SSLMBs) containing polyethylene oxide (PEO)-derived polymer electrolytes and high-voltage (> 4 V vs. Li/Li + ) cathode materials suffer from three sources of failure: (1) instability between the polymer electrolyte and cathode at high voltage, (2) instability of the polymer electrolyte with Li metal, and (3) poorly-designed cathodes. In this study, these three sources of failure are deconvoluted by studying Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.6) cathodes and a gel polymer electrolyte (GPE) derived from PEO. Initial cycling data reveals that rapid capacity fade occurs regardless of whether soft short circuits form due to Li dendrites. Cyclic voltammetry scans on cells featuring a Li metal electrode, GPE, and a NMC811 electrode free of additives suggest that there are no runaway reactions between the GPE and NMC811 up to 4.5 V vs. Li/Li + . Cathode/cathode symmetric cell cycling demonstrates that Li metal reactivity is a prime source of failure, though a poorly-designed cathode leads to subpar performance. A cathode with single-crystal NMC particles was demonstrated to achieve better initial capacity and longer cycle life, indicating room for improvement in SSLMB cathode design. Therefore, the sources of failure as enumerated may be ranked as follows from most to least concerning: 2 > 3 > 1.

25 ENERGY STORAGE↗

Non-destructive electrochemical diagnosis of failure mechanisms in aqueous zinc batteries

The early detection of secondary reactions that affect the life and performance of zinc manganese oxide batteries requires a shift from conventional time-consuming and often destructive procedures to rapid lifetime-predictive techniques. In this work, an electrochemical approach is employed to elucidate independent signatures for four common types of failure mechanisms in zinc manganese dioxide (Zn||MnO2) batteries—namely, the loss of zinc inventory, the loss of active material at the cathode, electrolyte depletion, and increased cell impedance. Our findings, specific to coin cell configurations, reveal that each induced failure mechanism can be distinctively modeled and identified based on responses from the rest voltage and columbic-efficiency data for prompt detection. For instance, electrolyte depletion response manifests a distinctive abrupt (>80 %) decrease in columbic efficiency (CE) and charge-rest voltage (Vc) while the discharge-rest voltage remained constant at ~1.3 V. Furthermore, electrolyte rejuvenation of the cell increased the CE to >95 % and restored Vc from ~0.3 to >1.7 V. Recovery experiments and reference performance tests demonstrated consistency between electrochemical descriptors and their associated failure mechanisms. Further, the outcomes of this work provide valuable insights and data models for some of the dominant failure mechanisms present in zinc manganese battery chemistries, which are beneficial to accelerated early-lifetime diagnosis and advancement of Zn batteries development.

25 ENERGY STORAGE↗

The consequences of failure should be considered in siting geologic carbon sequestration projects

Geologic carbon sequestration is the injection of anthropogenic CO{sub 2} into deep geologic formations where the CO{sub 2} is intended to remain indefinitely. If successfully implemented, geologic carbon sequestration will have little or no impact on terrestrial ecosystems aside from the mitigation of climate change. However, failure of a geologic carbon sequestration site, such as large-scale leakage of CO{sub 2} into a potable groundwater aquifer, could cause impacts that would require costly remediation measures. Governments are attempting to develop regulations for permitting geologic carbon sequestration sites to ensure their safety and effectiveness. At present, these regulations focus largely on decreasing the probability of failure. In this paper we propose that regulations for the siting of early geologic carbon sequestration projects should emphasize limiting the consequences of failure because consequences are easier to quantify than failure probability.

54 ENVIRONMENTAL SCIENCES↗

The potential for avoiding hydrogen release from cryogenic pressure vessels after vacuum insulation failure

This paper presents an analysis of vacuum insulation failure in an automotive cryogenic pressure vessel (also known as cryo-compressed vessel) storing hydrogen. Vacuum insulation failure increases heat transfer into cryogenic vessels by about a factor of 100, potentially leading to rapid pressurization and venting of the cryogen to avoid exceeding maximum allowable working pressure (MAWP). Hydrogen release to the environment may be dangerous, especially if the vehicle is located in a closed space (e.g. a garage or tunnel) at the moment of insulation failure. We therefore consider utilization of the hydrogen in the vehicle fuel cell and dissipation of the electricity by operating vehicle accessories or electric resistances as an alternative to releasing hydrogen to the environment. We consider two strategies: initiating hydrogen extraction immediately after vacuum insulation failure or waiting until maximum operating pressure is reached before extraction. The results indicate that cryogenic pressure vessels have thermodynamic advantages that enable slowing down hydrogen release to moderate levels that can be consumed in the fuel cell and dissipated in vehicle accessories supplemented by electric resistances, even in the worst case when the insulation fails at the moment when the vessel stores hydrogen near its maximum density (70 g/L at 300 bar). As a result, the two proposed strategies are therefore feasible, and the best alternative can be chosen based on economic and/or implementation constraints.

08 HYDROGEN↗

Recognizing False Biochemical Failure Calls After Radiation With or Without Neo-Adjuvant Androgen Deprivation for Prostate Cancer

Purpose: We studied prostate-specific antigen (PSA) changes after radiation with or without neoadjuvant androgen deprivation to determine posttreatment PSA scenarios in which false-positive biochemical failures (FPBF) are most likely to occur. Methods and Materials: In the Trans-Tasman Radiation Oncology 96.01 Group trial, patients with T2b, 2c, 3, 4 N0 prostate cancer were randomized to 3 or 6 months goserelin and flutamide (STAD) before and during 66 Gy to the prostate and seminal vesicles (XRT) or to XRT alone. Piecewise longitudinal changes in PSA before relapse were characterized and quantified to determine which might cause FPBF calls. Results: Between 1996 and 2000, 802 eligible patients were randomized. Of these, 492 met the criteria for American Society for Therapeutic Radiology and Oncology (ASTRO) failure and 467 for Phoenix failure. Seventy-seven ASTRO fails and 39 Phoenix fails were deemed false positives (FPs). The majority of FPBFs were associated with the 'plateauing' in PSA values that follow posttreatment nadir. FPBFs were particularly common in men treated with STAD, in whom small, consecutive PSA rises before or during this phenomenon triggered 56 FP ASTRO fail calls. In these men, the Phoenix fail criteria triggered only 15 FPBF calls. However, the Phoenix criteria were more vulnerable than ASTRO to short-term isolated PSA rises during plateau, which resulted in 15 Phoenix fail calls but only 3 FP ASTRO fails. Conclusions: The Phoenix definition avoided 50% of FPBF calls that occurred with the ASTRO definition. Failures should be confirmed by further PSA rises before investigation and treatment is considered.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Outcomes and Patterns of Failure for Grade 2 Meningioma Treated With Reduced-Margin Intensity Modulated Radiation Therapy

Purpose: The purpose of this study was to evaluate intracranial control and patterns of local recurrence (LR) for grade 2 meningiomas treated with intensity modulated radiation therapy (IMRT) with limited total margin expansions of ≤1 cm. Methods and Materials: We reviewed records of patients with a neuropathological diagnosis of grade 2 meningioma who underwent IMRT at our institution between 2002 and 2012. Actuarial rates were determined by the Kaplan-Meier method from the end of RT. LR was defined as in-field if ≥90% of the recurrence was within the prescription isodose, out-of-field (marginal) if ≥90% was outside of the prescription isodose, and both if neither criterion was met. Results: Between 2002 and 2012, a total of 54 consecutive patients underwent IMRT for grade 2 meningioma. Eight of these patients had total initial margins >1 cm and were excluded, leaving 46 patients for analysis. The median imaging follow-up period was 26.2 months (range, 7-107 months). The median dose for fractionated IMRT was 59.4 Gy (range, 49.2-61.2 Gy). Median clinical target volume (CTV), planning target volume (PTV), and total margin expansion were 0.5 cm, 0.3 cm, and 0.8 cm, respectively. LR occurred in 8 patients (17%), with 2-year and 3-year actuarial local control (LC) of 92% and 74%, respectively. Six of 8 patients (85%) had a known pattern of failure. Five patients (83%) had in-field LR; no patients had marginal LR; and 1 patient (17%) had both. Conclusions: The use of IMRT to treat grade 2 meningiomas with total initial margins (CTV + PTV) ≤1 cm did not appear to compromise outcomes or increase marginal failures compared with other modern retrospective series. Of the 46 patients who had margins ≤1 cm, none experienced marginal failure only. These results demonstrate efficacy and low risk of marginal failure after IMRT treatment of grade 2 meningiomas with reduced margins, warranting study within a prospective clinical trial.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Risk Prediction Models of Locoregional Failure After Radical Cystectomy for Urothelial Carcinoma: External Validation in a Cohort of Korean Patients

Purpose: To evaluate the predictive accuracy and general applicability of the locoregional failure model in a different cohort of patients treated with radical cystectomy. Methods and Materials: A total of 398 patients were included in the analysis. Death and isolated distant metastasis were considered competing events, and patients without any events were censored at the time of last follow-up. The model included the 3 variables pT classification, the number of lymph nodes identified, and margin status, as follows: low risk (≤pT2), intermediate risk (≥pT3 with ≥10 nodes removed and negative margins), and high risk (≥pT3 with <10 nodes removed or positive margins). Results: The bootstrap-corrected concordance index of the model 5 years after radical cystectomy was 66.2%. When the risk stratification was applied to the validation cohort, the 5-year locoregional failure estimates were 8.3%, 21.2%, and 46.3% for the low-risk, intermediate-risk, and high-risk groups, respectively. The risk of locoregional failure differed significantly between the low-risk and intermediate-risk groups (subhazard ratio [SHR], 2.63; 95% confidence interval [CI], 1.35-5.11; P<.001) and between the low-risk and high-risk groups (SHR, 4.28; 95% CI, 2.17-8.45; P<.001). Although decision curves were appropriately affected by the incidence of the competing risk, decisions about the value of the models are not likely to be affected because the model remains of value over a wide range of threshold probabilities. Conclusions: The model is not completely accurate, but it demonstrates a modest level of discrimination, adequate calibration, and meaningful net benefit gain for prediction of locoregional failure after radical cystectomy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Mechanical failure and glass transition in metallic glasses

The current majority view on the phenomenon of mechanical failure in metallic glasses appears to be that it is caused by the activity of some structural defects, such as free-volumes or shear transformation zones, and the concentration of such defects is small, only of the order of 1%. However, the recent results compel us to revise this view. Through molecular dynamics simulation it has been shown that mechanical failure is the stress-induced glass transition. According to our theory the concentration of the liquid-like sites (defects) is well over 20% at the glass transition. We suggest that the defect concentration in metallic glasses is actually very high, and percolation of such defects causes atomic avalanche and mechanical failure. In this article we discuss the glass transition, mechanical failure and viscosity from such a point of view.

36 MATERIALS SCIENCE↗

Failure statistics for commercial lithium ion batteries: A study of 24 pouch cells

There are relatively few publications that assess capacity decline in enough commercial cells to quantify cell-to-cell variation, but those that do show a surprisingly wide variability. Capacity curves cross each other often, a challenge for efforts to measure the state of health and predict the remaining useful life (RUL) of individual cells. We analyze capacity fade statistics for 24 commercial pouch cells, providing an estimate for the time to 5% failure. Our data indicate that RUL predictions based on remaining capacity or internal resistance are accurate only once the cells have already sorted themselves into “better” and “worse” ones. Analysis of our failure data, using maximum likelihood techniques, provide uniformly good fits for a variety of definitions of failure with normal and with 2- and 3-parameter Weibull probability density functions, but we argue against using a 3-parameter Weibull function for our data. pdf fitting parameters appear to converge after about 15 failures, although business objectives should ultimately determine whether data from a given number of batteries provides sufficient confidence to end lifecycle testing. Increased efforts to make batteries with more consistent lifetimes should lead to improvements in battery cost and safety.

25 ENERGY STORAGE↗

Numerical and experimental analysis of mechanically induced failure in electric vehicle battery modules

Mitigating thermal runaway and cell-to-cell propagation is essential for improving the safety of electric and hybrid vehicles. Enhancing digital twin capabilities to predict battery mechanical abuse is particularly critical for automotive and aerospace applications, where crashworthiness is a key concern. Understanding failure conditions and propagation in battery modules during mechanical abuse is complex due to interactions between structural deformation, heat transfer, electrochemical processes, exothermic reactions and mechanical fracture. While prior studies have focused on modeling cell-level behavior, extending these models to module or pack level is necessary for a system level understating of electric vehicle safety. This study develops coupled large deformation finite element models that simultaneously solve for electrochemistry, material failure, internal short circuit and thermal runaway propagation. The models account for mechanical and thermal interactions between lithium-ion cells and other battery components while the contact interfaces are evolving with time. Model-predicted voltage, temperature and force responses are compared with experimental data for validation. The results demonstrate that the approach captures key failure mechanisms, including thermal propagation through heat transfer, electrical propagation from short circuits in parallel-connected cells, and mechanical propagation via penetration and crack formation. These findings show that computational models are valuable tools for understanding battery module failure and providing insight that can reduce the need for extensive experimental testing.

25 ENERGY STORAGE↗

A probabilistic assessment of PWR SNF cladding pinching failure considering potential transportation accident conditions

This report presents a probabilistic assessment of pressurized water reactor (PWR) spent nuclear fuel (SNF) rod cladding pinching failure triggered by a transportation accident, after 300 years of dry storage. Three thousand pinching scenarios, which were previously evaluated assuming a baseline 9-m cask drop and a horizontal impact on an unyielding surface, are reassessed assuming more realistic train transportation accidents. Each scenario was defined using Latin Hypercube Sampling (LHS) of SNF rod conditions and loading parameters, and it is simulated with a nonlinear finite element (FE) model. Cladding failure is evaluated under consideration of hydride-related embrittlement effects. The reassessment indicates that cladding pinching failure is not significantly affected by the assumptions on transportation accidents, but is rather controlled by other parameters, mainly the pellet-cladding gap width. The reevaluated, conditional failure probability ranges from 1.62 E-7 to 6.47 E-7, for 5,000 km of transportation by train.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Failure recovery for bulk synchronous applications with MPI stages

When an MPI program experiences a failure, the most common recovery approach is to restart all processes from a previous checkpoint and to re-queue the entire job. A disadvantage of this method is that, although the failure occurred within the main application loop, live processes must start again from the beginning of the program, along with new replacement processes—this incurs unnecessary overhead for live processes. To avoid such overheads and concomitant delays, we introduce the concept of “MPI Stages.” MPI Stages saves internal MPI state in a separate checkpoint in conjunction with application state. Upon failure, both MPI and application state are recovered, respectively, from their last synchronous checkpoints and continue without restarting the overall MPI job. Live processes roll back only a few iterations within the main loop instead of rolling back to the beginning of the program, while a replacement of failed process restarts and reintegrates, thereby achieving faster failure recovery. As a result, this approach integrates well with large-scale, bulk synchronous applications and checkpoint/restart.

97 MATHEMATICS AND COMPUTING↗

Rapid characterization and failure analysis of 6276 rooftop-harvested photovoltaic connectors

Photovoltaic (PV) connectors, which link modules in series and connect PV strings in parallel, have increasingly been recognized as a primary contributor to PV system failures and a source of numerous fire incidents. However, publicly available data on the rates and types of connector failures are scarce, primarily due to the proprietary nature of the information and the need for comprehensive analysis. This study represents the first large-scale investigation of harvested PV connectors, drawing from a dataset of 6276 connectors from residential rooftop solar systems across the United States. The outcome of this work is twofold: 1) we have established a rapid characterization method for large populations of harvested connectors, incorporating visual inspection, resistance measurements, and X-ray imaging; and 2) the analysis made possible by our rapid-processing method has revealed, for a population of connector models provided by a single rooftop installer, failure statistics and insights for various connector makes and models, installation practices, operating currents, and internal component displacements. This research identifies common failure modes that could be considered in future connector designs standards, and operations and maintenance practices, to ultimately improve the reliability of this vital component of PV infrastructure.

MC4↗

Cascading Failures in Interdependent Networks with Multiple Supply-Demand Links and Functionality Thresholds

Various social, financial, biological and technological systems can be modeled by interdependent networks. It has been assumed that in order to remain functional, nodes in one network must receive the support from nodes belonging to different networks. So far these models have been limited to the case in which the failure propagates across networks only if the nodes lose all their supply nodes. In this paper we develop a more realistic model for two interdependent networks in which each node has its own supply threshold, i.e., they need the support of a minimum number of supply nodes to remain functional. In addition, we analyze different conditions of internal node failure due to disconnection from nodes within its own network. We show that several local internal failure conditions lead to similar nontrivial results. When there are no internal failures the model is equivalent to a bipartite system, which can be useful to model a financial market. We explore the rich behaviors of these models that include discontinuous and continuous phase transitions. Using the generating functions formalism, we analytically solve all the models in the limit of infinitely large networks and find an excellent agreement with the stochastic simulations.

97 MATHEMATICS AND COMPUTING↗

Unifying role of dissipative action in the dynamic failure of solids

A fourth-power law underlying the steady shock-wave structure and solid viscosity of condensed material has been observed for a wide range of metals and non-metals. The fourth-power law relates the steady-wave Hugoniot pressure to the fourth power of the strain rate during passage of the material through the structured shock wave. Preceding the fourth-power law was the observation in a shock transition that the product of the shock dissipation energy and the shock transition time is a constant independent of the shock pressure amplitude. Invariance of this energy-time product implies the fourth-power law. This property of the shock transition in solids was initially identified as a shock invariant. More recently, it has been referred to as the dissipative action, although no relationship to the accepted definitions of action in mechanics has been demonstrated. This same invariant property has application to a wider range of transient failure phenomena in solids. Invariance of this dissipation action has application to spall fracture, failure through adiabatic shear, shock compaction of granular media, and perhaps others. Through models of the failure processes, a clearer picture of the physics underlying the observed invariance is emerging. These insights in turn are leading to a better understanding of the shock deformation processes underlying the fourth-power law. Experimental result and material models encompassing the dynamic failure of solids are explored for the purpose of demonstrating commonalities leading to invariance of the dissipation action. Calculations are extended to aluminum and uranium metals with the intent of predicting micro-scale dynamics and spatial structure in the steady shock wave.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗