Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Positive effect of Sc and Zr on globular microstructure formation in AA7075 thixoforming feedstock

One of methods of obtaining a fine globular microstructure in a semi-solid range, necessary for thixoforming process, is modifiers additions. For this purpose 0.5 weight percent of modifying elements-scandium and zirconium-was added to 7075 alloy. The microstructure of such alloy consisted of homogeneously distributed globular grains of solid solution with the following chemical composition: Mg - 1.9%, Al - 91.6%, Cu - 1.0%, Zn - 5.5%(all in wt.%). Quantitative metallographic analysis showed that the average grain size was 23.5 {mu}m, much smaller than in the alloy without additions and 3.08% volume fraction of precipitates in the form of a layer between spherical {alpha}(Al) grains. X-ray phase analysis of the 7075 alloy with Sc and Zr additions confirmed the dominant presence of aluminum solid solution and the intermetallic hexagonal phase MgZn{sub 2}. Electron diffraction pattern confirmed location of {eta}MgZn{sub 2} phase at the grain boundaries. EDS chemical analysis of the {eta}MgZn{sub 2} phase showed following content of elements: Mg - 17.2%, Al - 20.4%, Cu - 27.8%, Zn - 34.6%. The larger amount of Cu and Al indicated non-stoichiometry of the {eta} phase, which can be presented with a formula [Mg(Zn,Al,Cu){sub 2}]. Additionally, inside the aluminum solution, small, square-shaped precipitations enriched with Sc and Zr were observed. Electron diffraction pattern allowed identification of the precipitates as cubic Al{sub 3}(Sc,Zr) phase. The average hardness of feedstock was 105 HV5. DSC analysis during heating of the alloy enabled the estimation of a solidus line, at temperature of 548 deg. C and a liquidus line at temperature: 656 deg. C. For cooling, the temperatures for solidus and liquidus were 545 deg. C and 636 deg. C respectively. Additionally, the relation of liquid phase as a function of temperature was determined. Measurements of rheological properties in the semi-solid range, using the Searl system indicated that an increase of a particle size leads to an observable decrease of viscosity during isothermal shearing.

36 MATERIALS SCIENCE↗

Study on the effect of surfactants on morphologies of trigonal selenium in microfluidic reactor

The influence of the surfactants on the morphologies of trigonal selenium (t-Se) submicrostructures was studied in a two-step microfluidic system, which is composed of a glass microchip for preparing spherical amorphous selenium (a-Se) colloids coupled with a poly(methyl methacrylate) microchip for transferring a-Se into its t-Se seeds under sonication. The selenious acid containing surfactants and hydrazine solutions were delivered through the two-inlets of the glass microfluidic chip. Submicro-rods, -wires as well as -tubes of t-Se were obtained by simply varying the coexisted surfactants. The as-synthesized products were characterized by powder X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED).

36 MATERIALS SCIENCE↗

Iron on GaN(0001) pseudo-1 × 1 (1+1/(12) ) investigated by scanning tunneling microscopy and first-principles theory

We have investigated sub-monolayer iron deposition on atomically smooth GaN(0001) pseudo-1 × 1 (1+1/(12) ). The iron is deposited at a substrate temperature of 360 °C, upon which reflection high energy electron diffraction shows a transformation to a √(3)×√(3)-R30° pattern. After cooling to room temperature, the pattern transforms to a 6 × 6, and scanning tunneling microscopy reveals 6 × 6 reconstructed regions decorating the GaN step edges. First-principles theoretical calculations have been carried out for a range of possible structural models, one of the best being a Ga dimer model consisting of 2/9 monolayer of Fe incorporated into 7/3 monolayer of Ga in a relaxed but distorted structure.

36 MATERIALS SCIENCE↗

In-situ 3D characterization of He bubble and displacement damage in dense and nanoporous thin films.

This initial work attempted to determine the feasibility of using advanced in-situ, electron tomography, and precession electron diffraction techniques to determine the structural evolution that occurs during advanced aging of Pd films with nanometer resolution. To date, significant progress has been made in studying the cavity structures in sputtered, evaporated, and pulsed-laser deposited Pd films that result from both the deposition parameters, as well as from He ion implantation. In addition, preliminary work has been done to determine the feasibility of performing precession electron diffraction (PED) and electron tomography in these type of systems. Significant future work is needed to determine the proper conditions such that relevant advanced aging protocols can be developed.

Hattar, Khalid Mikhiel↗

Microstructural characterization of single-crystalline potassium hollandite nanowires

Single-crystalline potassium hollandite KTi{sub 8}O{sub 16.5} nanowires were synthesized by the molten salt method at 800 deg. C. Scanning electron microscopy observation shows that the nanowires are with octagonal cross-sections, and combined analyses of transmission electron microscopy and the electron diffraction results show that the terminated planes are angled 90 or 60 degrees to the growth direction, [001] crystallography direction. Ordering of the potassium cations in the tunnels was revealed by electron diffraction. The mechanism of one-dimensional growth of the nanowires was attributed to the oriented attachment mechanism.

36 MATERIALS SCIENCE↗

Structural characteristics of transition-iron-carbide precipitates formed during the first stage of tempering in 4340 steel

Microstructural and crystallographic characteristics of fine-scale transition-iron-carbide precipitates formed in martensite during tempering of 4340 steel at 200 °C for 3.6 ks were studied via transmission electron microscopy. Precipitates of near-equiaxed shapes and about 10 nm in size were observed, and rows of closely spaced precipitates were aligned predominantly along < 100 > martensite directions. Aggregates of aligned precipitates were up to 150 nm in length, although occasional kinks were present that disrupted the alignment, and some of the adjacent precipitates possessed somewhat different crystallographic orientations. Electron-diffraction results were analyzed in detail and found to be consistent with both epsilon-carbide and eta-carbide phases. Similarities between these two phases were highlighted and discussed. Experimental electron-diffraction data were compared with data from five different unit cells, and each was found to be consistent within uncertainty ranges of ± 0.003 nm for interplanar spacings, ± 2° for angles between plane normals, and a few degrees for the orientation relationship between precipitates and the matrix.

36 MATERIALS SCIENCE↗

The fluorite related modulated structures of the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} solid solution: An analogue for Pu disposition

We present an overview of the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} phase diagram, of interest as a model system for ceramic disposition of Pu (with Ce as a Pu surrogate). The fluorite related structures of this solid solution were determined using a modulated structure approach, to identify the underlying cation and vacancy ordering mechanisms from analysis of key satellite reflections in selected zone axis electron diffraction patterns. This revealed the formation of four structure types: pyrochlore for x<0.25, defect fluorite for 0.5 1.50. X-ray absorption (XAS) and electron energy loss (EELS) spectra confirmed the presence of Ce{sup 4+} as the dominant species in compositions across this system, remaining analogous to Pu{sup 4+}. - Graphical abstract: Electron diffraction reveals the cation vacancy ordering mechanisms leading to fluorite related superstructures in the Gd{sub 2}(Zr{sub 2-x}Ce{sub x})O{sub 7} solid solution. Highlights: Black-Right-Pointing-Pointer The fluorite related solid solution Gd{sub 2}(Zr{sub 1-x}Ce{sub x})O{sub 7} was prepared by solid state synthesis. Black-Right-Pointing-Pointer Ce L{sub 3} edge XAS and Ce M{sub 4,5} EELS measurements show Ce substitutes as Ce{sup 4+}. Black-Right-Pointing-Pointer Cation and oxygen vacancy ordering results in four fluorite related structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale modulations in (KLa)(CaW)O{sub 6} and (NaLa)(CaW)O{sub 6}

Complex nanoscale modulations are identified in two new A-site ordered perovskites, (KLa)(CaW)O{sub 6} and (NaLa)(CaW)O{sub 6}. In (KLa)(CaW)O{sub 6}, selected-area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) show an incommensurate nanocheckerboard modulation with {approx}9.4 Multiplication-Sign 9.4a{sub p} periodicity (a{sub p} Almost-Equal-To 4 A for the cubic perovskite aristotype). For (NaLa)(CaW)O{sub 6} a one-dimensional modulation is observed with a {approx}16(1 1 0)a{sub p} repeat; the Left-Pointing-Angle-Bracket 1 1 0 Right-Pointing-Angle-Bracket orientation of the nanostripes is different from the Left-Pointing-Angle-Bracket 1 0 0 Right-Pointing-Angle-Bracket stripes observed in other mixed A-site systems. Studies using high temperature x-ray diffraction suggest the formation of the complex modulations is associated with small deviations from the ideal 1:1:1:1 stoichiometry of the (A{sup +}La{sup 3+})(CaW)O{sub 6} phases. Z-contrast images acquired on an aberration-corrected microscope provide evidence for deviations from stoichiometry with a {approx}1:15 periodic arrangement of La{sub 4/3}(CaW)O{sub 6}:(NaLa)(CaW)O{sub 6} nano-phases. - Graphical abstract: Complex nanoscale modulations are identified in two new A-site ordered perovskites, (KLa)(CaW)O{sub 6} and (NaLa)(CaW)O{sub 6}. In (KLa)(CaW)O{sub 6}, selected-area electron diffraction and high-resolution transmission electron microscopy show a two-dimensional, nanocheckerboard modulation. For (NaLa)(CaW)O{sub 6} a one-dimensional modulation is observed; the Left-Pointing-Angle-Bracket 1 1 0 Right-Pointing-Angle-Bracket orientation of the nanostripes is different from the Left-Pointing-Angle-Bracket 1 0 0 Right-Pointing-Angle-Bracket stripes observed in other mixed A-site systems. Highlights: Black-Right-Pointing-Pointer Two new A-site ordered perovskites were synthesized, (KLa)(CaW)O{sub 6} and (NaLa)(CaW)O{sub 6}. Black-Right-Pointing-Pointer Unusual 1D and 2D nanoscale patterns were observed. Black-Right-Pointing-Pointer Tolerance factor shown to be not enough to predict the observed morphologies. Black-Right-Pointing-Pointer High temperature x-ray diffraction data suggests a loss of stoichiometry is related to the modulations. Black-Right-Pointing-Pointer Z-contrast imaging provides direct evidence for non-stoichiometry and a new model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic control and characterization of surface defect states of TiO(sub 2) terminated SrTiO(sub 3) single crystals.

By using an alternative wet-etch procedure, we have obtained high-quality atomically flat TiO{sub 2} terminated surfaces of SrTiO{sub 3} single crystals with the morphology equivalent to that of the conventional wet-etch methods. By applying a combined power of photoluminescence (PL) spectroscopy, reflection high-energy electron diffraction, atomic force microscopy imaging, and soft x-ray absorption (XAS), we were able to identify and monitor the complex evolution of oxygen defect states and Ti valency at the surface and near-surface layers. Our experiments revealed a high level of local defects resulting in the presence of the Ti{sup 3+} states at the surface. We have developed a method to control the defect states capable of a marked reduction of the defect concentration. We have demonstrated that the PL and XAS are able to distinguish the surface-related Ti{sup 3+} states from oxygen vacancies trapping charge transfer vibronic excitons that define the PL intensity. The experimental findings will have important implications for the growth of high-quality ultrathin complex oxide heterostructures.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bi{sub 1−x}Nb{sub x}O{sub 1.5+x} (x=0.0625, 0.12) fast ion conductors: Structures, stability and oxide ion migration pathways

A combined experimental and computational study of Bi{sub 1−x}Nb{sub x}O{sub 1.5+x} (x=0.0625 and 0.12) has been carried out using laboratory X-ray, neutron and electron diffraction, impedance measurements and ab-initio molecular dynamics. We demonstrate that Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625}, previously reported to adopt a cubic fluorite-type superstructure, can form two different polymorphs depending on the synthetic method: a metastable cubic phase is produced by quenching; while slower cooling yields a stable material with a tetragonal √2×√2×1 superstructure, which undergoes a reversible phase transition into the cubic form at ~680 °C on subsequent reheating. Neutron diffraction reveals that the tetragonal superstructure arises mainly from ordering in the oxygen sublattice, with Bi and Nb remaining disordered, although structured diffuse scattering observed in the electron diffraction patterns suggests a degree of short-range ordering. Both materials are oxide ion conductors. On thermal cycling, Bi{sub 0.88}Nb{sub 0.12}O{sub 1.62} exhibits a decrease in conductivity of approximately an order of magnitude due to partial transformation into the tetragonal phase, but still exhibits conductivity comparable to yttria-stabilised zirconia (YSZ). Ab-initio molecular dynamics simulations performed on Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} show that oxide ion diffusion occurs by O{sup 2−} jumps between edge- and corner-sharing OM{sub 4} groups (M=Bi, Nb) via tetrahedral □M{sub 4} and octahedral □M{sub 6} vacancies. - Graphical abstract: Oxide ion migration in tetragonal Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} occurs by O{sup 2−} jumps between edge- and corner-sharing OM{sub 4} groups (M=Bi, Nb) via tetrahedral M{sub 4} and octahedral M{sub 6} vacancies. - Highlights: • Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} adopts a tetragonal √2×√2×1 fluorite superstructure. • Superstructure is due to ordering in the O-sublattice, with Bi/Nb disordered. • Bi{sub 0.9375}Nb{sub 0.0625}O{sub 1.5625} is a good oxide ion conductor. • O{sup 2−} jump between OM{sub 4} groups (M=Bi, Nb) via tetrahedral and octahedral vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular beam epitaxial growth of Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators on GaAs (111) substrates: a potential route to fabricate topological insulator p-n junction

High quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} topological insulators films were epitaxially grown on GaAs (111) substrate using solid source molecular beam epitaxy. Their growth and behavior on both vicinal and non-vicinal GaAs (111) substrates were investigated by reflection high-energy electron diffraction, atomic force microscopy, X-ray diffraction, and high resolution transmission electron microscopy. It is found that non-vicinal GaAs (111) substrate is better than a vicinal substrate to provide high quality Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} films. Hall and magnetoresistance measurements indicate that p type Sb{sub 2}Te{sub 3} and n type Bi{sub 2}Te{sub 3} topological insulator films can be directly grown on a GaAs (111) substrate, which may pave a way to fabricate topological insulator p-n junction on the same substrate, compatible with the fabrication process of present semiconductor optoelectronic devices.

36 MATERIALS SCIENCE↗

Persistence of crystal orientations across sub-micron-scale "super-grains" in self-organized Cu-W nanocomposites

We use precession electron diffraction to investigate the crystallographic character of copper (Cu)-tungsten (W) nanocomposites fabricated via physical vapor co-deposition at 400 oC. We observe sub-micron-scale regions, where apparently disconnected Cu and W grains have near identical crystallographic orientations. This persistence of grain orientations suggests Cu and W grains within these regions are interconnected in 3-D when they first form and may be considered as intercalated, sub-micron-scale "super-grains". Indeed, atom probe tomography provides direct evidence of 3-D interconnectivity of W domains. Our findings shed light on the structure and self organization mechanisms of nanocomposites formed by spontaneous phase separation of co-deposited metals.

Yadav, Digvijay↗

Ferroelectric and octahedral tilt twin disorder and the lead-free piezoelectric, sodium potassium niobate system

Using electron diffraction, trends in the local structural behaviour of the K{sub x}Na{sub 1-x}NbO{sub 3} (KNN x) 'solid solution' system are investigated and interpreted using an order/disorder based theoretical framework. At room temperature, electron diffraction shows a single plane of transverse polarised, diffuse intensity perpendicular to [0 1 0]{sub p} Low-Asterisk (p for parent sub-structure) across the entire phase diagram, indicative of ferroelectric disorder along the [0 1 0]{sub p} direction co-existing with long range ferroelectric order along the orthogonal [1 0 0]{sub p} and [0 0 1]{sub p} directions. An additional characteristic pattern of diffuse scattering is also observed, involving rods of diffuse intensity running along the [1 0 0]{sub p}* and [0 0 1]{sub p}* directions of the perovskite sub-structure and indicative of octahedral tilt disorder about the [1 0 0]{sub p} and [0 0 1]{sub p} axes co-existing with long range ordered octahedral tilting around the [0 1 0]{sub p} direction. A possible crystal chemical explanation for the existence of this latter octahedral tilt disorder is explored through bond valence sum calculations. The possible influence of both types of disorder on the previously refined, room temperature space group/s and average crystal structure/s is examined. - Graphical abstract: [-3,0.-1]p zone axis EDP of K{sub 0.46}Na{sub 0.54}NbO{sub 3} indexed according to both the relevant Pcm21 space groups (no subscripts) and the parent perovskite subcell (denoted by a subscript p). Highlights: Black-Right-Pointing-Pointer Characterises ferroelectric and octahedral tilt disorder in the KNN solid solution. Black-Right-Pointing-Pointer Discusses the possible driving forces for this disorder. Black-Right-Pointing-Pointer Discusses the implications of this disorder for physical properties. Black-Right-Pointing-Pointer Discusses the effects of this disorder on powder diffraction data.

36 MATERIALS SCIENCE↗

Creating Ruddlesden-Popper phases by hybrid molecular beam epitaxy

The synthesis of a 50 unit cell thick n = 4 Sr{sub n+1}Ti{sub n}O{sub 3n+1} (Sr{sub 5}Ti{sub 4}O{sub 13}) Ruddlesden-Popper (RP) phase film is demonstrated by sequentially depositing SrO and TiO{sub 2} layers in an alternating fashion using hybrid molecular beam epitaxy (MBE), where Ti was supplied using titanium tetraisopropoxide (TTIP). A detailed calibration procedure is outlined for determining the shuttering times to deposit SrO and TiO{sub 2} layers with precise monolayer doses using in-situ reflection high energy electron diffraction (RHEED) as feedback. Using optimized Sr and TTIP shuttering times, a fully automated growth of the n = 4 RP phase was carried out over a period of >4.5 h. Very stable RHEED intensity oscillations were observed over the entire growth period. The structural characterization by X-ray diffraction and high resolution transmission electron microscopy revealed that a constant periodicity of four SrTiO{sub 3} perovskite unit cell blocks separating the double SrO rocksalt layer was maintained throughout the entire film thickness with a very little amount of planar faults oriented perpendicular to the growth front direction. These results illustrate that hybrid MBE is capable of layer-by-layer growth with atomic level precision and excellent flux stability.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Facile synthesis of α-Fe{sub 2}O{sub 3} nanoparticles for high-performance CO gas sensor

Highlights: • We have demonstrated a facile method to prepare Fe{sub 2}O{sub 3} nanoparticles. • The gas sensing properties of α-Fe{sub 2}O{sub 3} have been invested. • The results show potential application of α-Fe{sub 2}O{sub 3} NPs for CO sensors in environmental monitoring. - Abstract: Iron oxide nanoparticles (NPs) were prepared via a simple hydrothermal method for high performance CO gas sensor. The synthesized α-Fe{sub 2}O{sub 3} NPs were characterized by X-ray diffraction, nitrogen adsorption/desorption isotherm, scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and selected area electron diffraction (SAED). The SEM, TEM results revealed that obtained α-Fe{sub 2}O{sub 3} particles had a peanut-like geometry with hemispherical ends. The response of the α-Fe{sub 2}O{sub 3} NPs based sensor to carbon monoxide (CO) and various concentrations of other gases were measured at different temperatures. It found that the sensor based on the peanut-like α-Fe{sub 2}O{sub 3} NPs exhibited high response, fast response–recovery, and good selectivity to CO at 300 °C. The experimental results clearly demonstrated the potential application of α-Fe{sub 2}O{sub 3} NPs as a good sensing material in the fabrication of CO sensor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxy and stress of MgO/GaAs(001) heterostructures

We report on the preparation of epitaxial MgO film on GaAs(001) substrates by molecular beam epitaxy at growth temperature of 20–200 °C. Reflection high energy electron diffraction, x-ray diffraction, and high resolution transmission electron microscopy reveal the growth of ordered crystalline cubic MgO(001) film at ∼200 °C with MgO(001)[100]|| GaAs(001)[100] and a 4 : 3 lattice registry. The surface of the MgO films, characterized by atomic force microscopy, exhibits a root mean square roughness of only 0.5 nm. In situ stress measurements reveal tensile stress as low as 1.7 GPa for a growth temperature of 200 °C in good agreement with the calculated residual misfit strain.

36 MATERIALS SCIENCE↗

Nanocrystalline spinel ferrite (MFe{sub 2}O{sub 4}, M = Ni, Co, Mn, Mg, Zn) powders prepared by a simple aloe vera plant-extracted solution hydrothermal route

Graphical abstract: This figure shows the specific magnetization curves of the as-prepared MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders obtained from room temperature VSM measurement. These curves are typical for a soft magnetic material and indicate hysteresis ferromagnetism in the field ranges of ±500 Oe, ±1000 Oe, and ±2000 Oe for the CoFe{sub 2}O{sub 4}, MgFe{sub 2}O{sub 4} and MnFe{sub 2}O{sub 4} respectively, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} show a superparamagnetic behavior. Highlights: ► Nanocrystalline MFe{sub 2}O{sub 4} powders were synthesized by a novel hydrothermal method. ► Metal acetylacetonates and aloe vera plant-extracted solution are used. ► This biosynthetic route is very simple and provides high-yield oxide nanomaterials. ► XRD and TEM results indicate that the prepared samples have only spinel structure. ► The maximum M{sub s} of 68.9 emu/g at 10 kOe were observed for the samples of MnFe{sub 2}O{sub 4}. - Abstract: Nanocrystalline spinel ferrite MFe{sub 2}O{sub 4} (M = Ni, Co, Mn, Mg, Zn) powders were synthesized by a novel hydrothermal method using Fe(acac){sub 3}, M(acac){sub 3} (M = Ni, Co, Mn, Mg, Zn) and aloe vera plant extracted solution. The X-ray diffraction and selected-area electron diffraction results indicate that the synthesized nanocrystalline have only spinel structure without the presence of other phase impurities. The crystal structure and morphology of the spinel ferrite powders, as revealed by TEM, show that the NiFe{sub 2}O{sub 4} and CoFe{sub 2}O{sub 4} samples contain nanoparticles, whereas the MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples consist of many nanoplatelets and nanoparticles. Interestingly, the ZnFe{sub 2}O{sub 4} sample contains plate-like structure of networked nanocrystalline particles. Room temperature magnetization results show a ferromagnetic behavior of the CoFe{sub 2}O{sub 4}, MnFe{sub 2}O{sub 4} and MgFe{sub 2}O{sub 4} samples, whereas the samples of NiFe{sub 2}O{sub 4} and ZnFe{sub 2}O{sub 4} exhibit a superparamagnetic behavior.

36 MATERIALS SCIENCE↗

Correlation between oxygen vacancies and sites of Mn ions in YMnO{sub 3}

In multiferroic hexagonal manganites (RMnO{sub 3}, R = Y, Sc, Ho-Lu), positions of Mn ions can affect both their in-plane and inter-plane exchange interactions, thus they are of utmost importance for the magneto-elastic coupling of rare-earth compounds. However, the reported in-plane positions of Mn ions by different groups are controversial and there is a lack of convenient method to identify the shift of Mn ions from the center of MnO{sub 5} bipyramids. Here, we demonstrate that the transmission electron microscopy is an efficient technique to characterize the positions of Mn ions and the shift of Mn ions can be directly recognized from the selected area electron diffraction (SAED) patterns. Through systematic studies on the SAED patterns acquired from regions with stoichiometric and non-stoichiometric ratio, we conclude that the intensities of (11{sup ¯}0) and (22{sup ¯}0) diffraction spots are very sensitive to the in-plane positions of Mn ions. We ascribe the off-centered shift of Mn ions to the in-plane oxygen vacancies and this is verified by combined electron microscopy and electron diffraction pattern calculations. Our results indicate that SAED can be used to judge both local positions of Mn ions and local oxygen deficiency in RMnO{sub 3} systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗