Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

New germanates RCrGeO{sub 5} (R=Nd-Er, Y): Synthesis, structure, and properties

The new complex germanates RCrGeO{sub 5} (R=Nd-Er, Y) have been synthesized and investigated by means of X-ray powder diffraction, electron microscopy, magnetic susceptibility and specific heat measurements. All the compounds are isostructural and crystallize in the orthorhombic symmetry, space group Pbam, and Z=4. The crystal structure of RCrGeO{sub 5}, as refined using X-ray powder diffraction data, includes infinite chains built by edge-sharing Cr{sup +3}O{sub 6} octahedra with two alternating Cr-Cr distances. The chains are combined into a three-dimensional framework by Ge{sub 2}O{sub 8} groups consisting of two edge-linked square pyramids oriented in opposite directions. The resulting framework contains pentagonal channels where rare-earth elements are located. Thus, RCrGeO{sub 5} germanates present new examples of RMn{sub 2}O{sub 5}-type compounds and show ordering of Cr{sup +3} and Ge{sup +4} cations. Electron diffraction as well as high-resolution electron microscopy confirm the structure solution. Magnetic susceptibility data for R=Nd, Sm, and Eu are qualitatively consistent with the presence of isolated 3d (antiferromagnetically coupled Cr{sup +3} cations) and 4f (R{sup +3}) spin subsystems in the RCrGeO{sub 5} compounds. NdCrGeO{sub 5} undergoes long-range magnetic ordering at 2.6 K, while SmCrGeO{sub 5} and EuCrGeO{sub 5} do not show any phase transitions down to 2 K. - Graphical abstract: Alternating Cr-Cr separations in the chain of edge-sharing CrO{sub 6} octahedra and the constraining effect of the GeO{sub 5} square pyramids in the structures of RCrGeO{sub 5}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth mechanism of extension twin variants during annealing of pure magnesium: An ‘ex situ’ electron backscattered diffraction investigation

Pure magnesium was subjected to plastic deformation through CSM (continuous stiffness measurement) indentation followed by annealing at 200 °C for 30 min. Nucleation of no new grains was observed neither at the twin–twin intersections nor at the multiple twin variants of a grain after annealing. Significant growth of off-basal twin orientation compared to basal twin orientation was observed in the sample after annealing and is attributed to the partial coherent nature of twin boundary in the later case. Further, growth of twins was independent of the strain distribution between parent and twinned grains. - Highlights: • An ‘ex situ’ EBSD of pure Mg during annealing was investigated. • Nucleation of no new grains was observed. • Significant growth of off-basal twin orientation was observed. • Growth of twins may be attributed to the partial coherent nature of twin boundary.

36 MATERIALS SCIENCE↗

Characterisation of strain-induced precipitation behaviour in microalloyed steels during thermomechanical controlled processing

The temperature at which thermomechanical controlled processing is undertaken strongly influences strain-induced precipitation (SIP) in microalloyed steels. In this study, the recrystallisation-precipitation-time-temperature curve was simulated to determine the full recrystallisation temperature, recrystallisation-stop temperature and the temperature where precipitation would occur at the shortest time. The calculated temperatures were verified by experimental testing for rolling between 1100 °C and 850 °C. On the basis of this a finishing deformation of 850 °C was chosen in order to maximise the precipitate number density formed in a fully unrecrystallised austenite. The orientation relationship between the SIP in austenite, and subsequent transformation to ferrite was identified by calculation from the coordinate transformation matrix, and by electron diffraction in the transmission electron microscope. The NbC formed as coherent/semi-coherent precipitates in the austenite, and remained coherent/semi-coherent in the ferrite, indicating a Kurdjumov-Sachs orientation relationship between the austenite and ferrite on transformation. - Highlights: •The austenite deformation temperature will influence strain-induced precipitation. •Precipitates are NbC, exhibiting an NaCl structure and lattice parameter 0.447 nm. •Fine NbC (< 10 nm) formed in austenite as coherent or semi-coherent precipitates. •Confirmed cube-on-cube orientation relationship between the NbC, the austenite and the ferrite.

36 MATERIALS SCIENCE↗

New strategy to the controllable synthesis of CuInS{sub 2} hollow nanospheres and their applications in lithium ion batteries

A new strategy has been presented to the controllable synthesis of CuInS{sub 2} hollow nanospheres based on the Cu{sub 2}O solid nanospheres as the precursor in the absence of any surfactant. Specifically, the CuInS{sub 2} hollow nanospheres result from hydrothermal transformation of the intermediate Cu{sub 7}S{sub 4} hollow nanospheres derived from Cu{sub 2}O solid nanosphere precursor by the Kirkendall effect in the conversion process. The CuInS{sub 2} hollow nanospheres with diameters of about 250 nm are assembly of nanoparticles with an average size of 20-30 nm. The composition, structure, and morphology of the Cu{sub 2}O precursor, the Cu{sub 7}S{sub 4} intermediate, and final CuInS{sub 2} product have been, respectively, characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) with selected area electron diffraction (SAED). Different from investigation of photovoltaic properties, in this work, the as-prepared CuInS{sub 2} hollow nanospheres have been explored as anode materials for rechargeable lithium ion batteries. They deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance with a discharge capacity of 265 mAh g{sup -1} after 20 cycles, which are superior to those of CuInS{sub 2} nanoparticles. The suitable surface area and relatively stable structure of the CuInS{sub 2} hollow nanospheres play an important role in their enhanced electrochemical performance as anode materials. - Graphical abstract: CuInS{sub 2} hollow nanospheres was successfully prepared from Cu{sub 2}O solid nanospheres in the absence of any surfactant, which can deliver a large initial discharge capacity of 1144 mAh g{sup -1} and exhibit good cycle performance. Highlights: Black-Right-Pointing-Pointer CuInS{sub 2} hollow nanospheres were synthesized hydrothermally from Cu{sub 2}O nanospheres. Black-Right-Pointing-Pointer The CuInS{sub 2} hollow nanospheres present high discharge capacities as anode materials. Black-Right-Pointing-Pointer Better cycling performance can be attributed to its hollow structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling of the hysteretic phenomena in RHEED intensity variation versus temperature for GaAs and InAs surfaces

This paper describes a study of the reflection high energy electron diffraction intensity change against temperature for GaAs and InAs surfaces. The reflection high energy electron diffraction intensity variation against temperature shows different hysteretic characters for the two materials. To date, the explanations for these phenomena were also different for the two substances. Here, we put forward an explanation for these hysteretic phenomena in general terms, applicable to both materials by using the hyperbolic model of hysteresis for coupled systems. Experimental results presented in the paper are in good agreement with the model predictions, supporting the proposed common explanation.

36 MATERIALS SCIENCE↗

Electron backscatter diffraction characterization of fatigue crack growth in laser metal wire deposited Ti-6Al-4V

Highlights: • No difference in fatigue crack growth rate was confirmed within the material. • The tortuosity of the crack propagation could be related to the alpha colonies. • Large areas with similar crystallographic orientation were observed. - Abstract: By additive manufacturing (AM) there is a feasibility of producing near net shape components in basically one step from 3D CAD model to final product. The interest for AM is high and during the past decade a lot of research has been carried out in order to understand the influence from process parameters on the microstructure and furthermore on the mechanical properties. In the present study laser metal wire deposition of Ti-6Al-4V has been studied in detail with regard to its fatigue crack propagation characteristics. Two specimen orientations, parallel and perpendicular to the deposition direction, have been evaluated at room temperature and at 250 °C. No difference in the fatigue crack growth rate could be confirmed for the two specimen orientations. However, in the fractographic study it was observed that the tortuosity varied between certain regions on the fracture surface. The local crack path characteristic could be related to the alpha colony size and/or the crystallographic orientation. Moreover, large areas exhibiting similar crystallographic orientation were observed along the prior beta grain boundaries, which were attributed to the wide alpha colonies frequently observed along the prior beta grain boundaries.

36 MATERIALS SCIENCE↗

Microfluidic sorting of protein nanocrystals by size for X-ray free-electron laser diffraction

The advent and application of the X-ray free-electron laser (XFEL) has uncovered the structures of proteins that could not previously be solved using traditional crystallography. While this new technology is powerful, optimization of the process is still needed to improve data quality and analysis efficiency. One area is sample heterogeneity, where variations in crystal size (among other factors) lead to the requirement of large data sets (and thus 10–100 mg of protein) for determining accurate structure factors. To decrease sample dispersity, we developed a high-throughput microfluidic sorter operating on the principle of dielectrophoresis, whereby polydisperse particles can be transported into various fluid streams for size fractionation. Using this microsorter, we isolated several milliliters of photosystem I nanocrystal fractions ranging from 200 to 600 nm in size as characterized by dynamic light scattering, nanoparticle tracking, and electron microscopy. Sorted nanocrystals were delivered in a liquid jet via the gas dynamic virtual nozzle into the path of the XFEL at the Linac Coherent Light Source. We obtained diffraction to ∼4 Å resolution, indicating that the small crystals were not damaged by the sorting process. We also observed the shape transforms of photosystem I nanocrystals, demonstrating that our device can optimize data collection for the shape transform-based phasing method. Using simulations, we show that narrow crystal size distributions can significantly improve merged data quality in serial crystallography. From this proof-of-concept work, we expect that the automated size-sorting of protein crystals will become an important step for sample production by reducing the amount of protein needed for a high quality final structure and the development of novel phasing methods that exploit inter-Bragg reflection intensities or use variations in beam intensity for radiation damage-induced phasing. This method will also permit an analysis of the dependence of crystal quality on crystal size.

36 MATERIALS SCIENCE↗

Synthesis and characterization of chloro-sulphide glass-ceramics containing neodymium(III) ions

In this paper, we describe the preparation of Nd{sup 3+} doped glass-ceramics in the (GeS{sub 2}){sub 70}-(Ga{sub 2}S{sub 3}){sub 20}-(CsCl){sub 10} system. Neodymium has been introduced as metallic powder or incorporated as sulphide. Appropriate heat treatments of the base-glass lead to glass-ceramics with controllable crystal sizes that are transparent in the visible and infrared spectral ranges. X-ray diffraction as well as electron diffraction techniques were used to investigate the crystallization process. Differential scanning calorimetry indicates that neodymium ions are poor nucleating agents in this glass compared to erbium ions. Luminescence measurements were also performed and point out that although the ceramization process increases significantly the luminescence efficiency, the neodymium ions are only partially incorporated in the nanocrystals.

36 MATERIALS SCIENCE↗

Quasi-Two-Dimensional Heterostructures (K M 1 – x Te)(LaTe 3 ) ( M = Mn and Zn) with Charge Density Waves

Layered heterostructure materials with two different functional building blocks can teach us about emergent physical properties and phenomena arising from interactions between the layers. Here, we report intergrowth compounds KLaM 1 - x Te 4 (M = Mn and Zn; $x \approx$ 0.35) featuring two chemically distinct alternating layers [LaTe 3 ] and [KM 1 - x Te]. Their crystal structures are incommensurate, determined by single X-ray diffraction for the Mn compound and a transmission electron microscope study for the Zn compound. KLaMn 1 – x Te 4 crystallizes in the orthorhombic superspace group Pmnm(01/2 gamma)s00 with lattice parameters a = 4.4815(3) Å, b = 21.6649(16) Å, and c = 4.5220(3) Å. It exhibits charge density wave order at room temperature with a modulation wave vector q = 1/2b* + 0.3478c* originating from electronic instability of Te-square nets in [LaTe 3 ] layers. The Mn analog exhibits a cluster spin glass behavior with spin freezing temperature $T_f \approx$ 5 K attributed to disordered Mn vacancies and competing magnetic interactions in the [Mn 1 - x Te] layers. The Zn analog also has charge density wave order at room temperature with a similar q-vector having the c* component similar to 0.346 confirmed by selected-area electron diffraction. Electron transfer from [KM 1 - x Te] to [LaTe 3 ] layers exists in KLaM 1 – x Te 4 , leading to an enhanced electronic specific heat coefficient. The resistivities of KLaM 1 - x Te 4 (M = Mn and Zn) exhibit metallic behavior at high temperatures and an upturn at low temperatures, suggesting partial localization of carriers in the [LaTe 3 ] layers with some degree of disorder associated with the M atom vacancies in the [M 1 - x Te] layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly crystalline MoS{sub 2} thin films grown by pulsed laser deposition

Highly crystalline thin films of MoS{sub 2} were prepared over large area by pulsed laser deposition down to a single monolayer on Al{sub 2}O{sub 3} (0001), GaN (0001), and SiC-6H (0001) substrates. X-ray diffraction and selected area electron diffraction studies show that the films are quasi-epitaxial with good out-of-plane texture. In addition, the thin films were observed to be highly crystalline with rocking curve full width half maxima of 0.01°, smooth with a RMS roughness of 0.27 nm, and uniform in thickness based on Raman spectroscopy. From transport measurements, the as-grown films were found to be p-type.

36 MATERIALS SCIENCE↗

Synthesis of few-walled carbon nanotube-Rh nanoparticles by arc discharge: Effect of selective oxidation

Highly crystalline rhodium (Rh) nanoparticles supported on carbon nanotubes were prepared by selective oxidation method. Carbon nanotubes and FeRh nanoparticles were simultaneously generated in hydrogen arc plasma. The as-grown nanomaterials can be purified by heat treatment in open air and by soaking in HCl. X-ray diffraction and selected area electron diffraction results reveal that as-grown FeRh nanoparticles have a typical chemical CsCl-type structure which can be transformed into a face-centered cubic structure by thermal annealing in the purification process. The purification process is selective toward the removal of the amorphous carbon coating the nanoparticles, and transforms Fe to Fe{sub 2}O{sub 3}. Fe{sub 2}O{sub 3} can be easily dissolved in hydrochloric acid, leaving carbon nanotubes-Rh nanoparticles. Rh nanoparticles with diameters of 2-60 nm are deposited uniformly on the surface of the carbon nanotube bundles. This simple and selective chemistry offers a new process for synthesizing and controlling Fe content in carbon nanotube-FeRh nanoparticles. Highlights: Black-Right-Pointing-Pointer High-crystallinity CNTs and FeRh nanoparticles were simultaneously generated in arc plasma. Black-Right-Pointing-Pointer The diameter distribution of CNTs depends on different gases. Black-Right-Pointing-Pointer Heat treatment in open air and soaking in HCl can convert CNTs-FeRh to CNTs-Rh. Black-Right-Pointing-Pointer The selective oxidation mechanisms of metal nanoparticles and carbon materials differ.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study of the growth mechanisms of GaN/(Al, Ga)N quantum dots: Correlation between structural and optical properties

The ammonia-based molecular beam epitaxy of GaN/(Al, Ga)N quantum dots is investigated using reflection high-energy electron diffraction, atomic force microscopy, transmission electron microscopy and photoluminescence. The main steps of the formation kinetics are identified and the influence of diffusion and evaporation processes on both the quantum dot and the wetting layer morphology is addressed. The correlation between the optical and structural properties of such structures finally allows for the analysis of matter exchanges between the quantum dots and the wetting layer during capping.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Altermagnetic Band Splitting in 10 nm Epitaxial CrSb Thin Films

Altermagnets are a newly identified family of collinear antiferromagnets with a momentum-dependent spin-split band structure of non-relativistic origin, derived from spin-group symmetry-protected crystal structures. Among candidate altermagnets, CrSb is attractive for potential applications because of a large spin-splitting near the Fermi level and a high Néel transition temperature of around 700 K. Molecular beam epitaxy is used to synthesize CrSb (0001) thin films with thicknesses ranging from 10 to 100 nm. Structural characterization, using reflection high energy electron diffraction, scanning transmission electron microscopy, and X-ray diffraction, demonstrates the growth of epitaxial films with good crystallinity. Polarized neutron reflectometry shows the absence of any net magnetization, consistent with antiferromagnetic order. In vacuo angle resolved photoemission spectroscopy (ARPES) measurements probe the band structure in a previously unexplored regime of film thickness, down to 10 nm. These ARPES measurements show a bulk-type, 3D momentum-dependent band splitting of up to 0.7 eV with g-wave symmetry, consistent with that seen in prior studies of bulk single crystals. The distinct altermagnetic band structure required for potential spin-transport applications survives down to the ∼10 nm thin film limit at room temperature.

Santhosh, Sandra↗

Transient atomic behavior and surface kinetics of GaN

An in-depth model for the transient behavior of metal atoms adsorbed on the surface of GaN is developed. This model is developed by qualitatively analyzing transient reflection high energy electron diffraction (RHEED) signals, which were recorded for a variety of growth conditions of GaN grown by molecular-beam epitaxy (MBE) using metal-modulated epitaxy (MME). Details such as the initial desorption of a nitrogen adlayer and the formation of the Ga monolayer, bilayer, and droplets are monitored using RHEED and related to Ga flux and shutter cycles. The suggested model increases the understanding of the surface kinetics of GaN, provides an indirect method of monitoring the kinetic evolution of these surfaces, and introduces a novel method of in situ growth rate determination.

36 MATERIALS SCIENCE↗

Investigation of (110) SnO{sub 2} growth mechanisms on TiO{sub 2} substrates by plasma-assisted molecular beam epitaxy

We investigated the growth mechanisms of (110) SnO{sub 2} on (110) TiO{sub 2} by varying tin fluxes under a fixed oxygen pressure by plasma-assisted molecular beam epitaxy. A growth diagram was constructed that consists of two distinct growth regimes: an increase in growth rates in an oxygen-rich environment and a decrease in growth rates in a tin-rich environment. The excess tin played an important role for the unexpected decreasing growth rate in a tin-rich regime. Without a buildup of the tin adlayer coverage, the accumulation of macroscopic tin droplets on the SnO{sub 2} film surface was confirmed by the spotty high energy electron diffraction pattern and the absence of intensity oscillations. No SnO{sub 2} growth was observed when the impinging tin flux was larger than twice the stoichiometric tin flux, suggesting that all active oxygen atoms were consumed by evaporated tin atoms to form volatile tin suboxide (SnO). The formation of volatile SnO, causing the decreasing growth rate in a tin-rich condition, was monitored by in situ quadrupole mass spectrometry.

36 MATERIALS SCIENCE↗

Molecular-beam epitaxy of AlInN: An effect of source flux and temperature on indium atom incorporation in alloys

Growth of AlInN alloys by molecular-beam epitaxy is studied by reflection high-energy electron diffraction, where in-plane lattice constant and specular beam intensity oscillations are recorded for information of lattice misfit and growth rate as a function of source flux and temperature. An unexpected dependence of alloy growth rate on indium flux is observed, which reflects the specific incorporation kinetics of indium in the alloy.

36 MATERIALS SCIENCE↗

Growth of cubic GaN quantum dots

Zinc-blende GaN quantum dots were grown on 3C-AlN(001) by two different methods in a molecular beam epitaxy system. The quantum dots in method A were fabricated by the Stranski-Krastanov growth process. The quantum dots in method B were fabricated by droplet epitaxy, a vapor-liquid-solid process. The density of the quantum dots was controllable in a range of 10{sup 8} cm{sup -2} to 10{sup 12} cm{sup -2}. Reflection high energy electron diffraction analysis confirmed the zinc-blende crystal structure of the QDs. Photoluminescence spectroscopy revealed the optical activity of the QDs, the emission energy was in agreement with the exciton ground state transition energy of theoretical calculations.

36 MATERIALS SCIENCE↗

Experimental estimation of oxidation-induced Si atoms emission on Si(001) surfaces

Kinetics of Si atoms emission during the oxidation of Si(001) surfaces have been investigated using reflection high energy electron diffraction combined with Auger electron spectroscopy. The area ratio of the 1 × 2 and the 2 × 1 domains on a clean Si(001) surface changed with the oxidation of the surface by Langmuir-type adsorption. This change in the domain ratio is attributed to the emission of Si atoms. We can describe the changes in the domain ratio using the Si emission kinetics model, which states that (1) the emission rate is proportional to the oxide coverage, and (2) the emitted Si atoms migrate on the surface and are trapped at S{sub B} steps. Based on our model, we find experimentally that up to 0.4 ML of Si atoms are emitted during the oxidation of a Si(001) surface at 576 °C.

36 MATERIALS SCIENCE↗