Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Transistor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Stress-induced Effects Caused by 3D IC TSV Packaging in Advanced Semiconductor Device Performance

Potential challenges with managing mechanical stress and the consequent effects on device performance for advanced 3D through-silicon-via (TSV) based technologies are outlined. The paper addresses the growing need in a simulation-based design verification flow capable to analyze a design of 3D IC stacks and to determine across-die out-of-spec variations in device electrical characteristics caused by the layout and through-silicon-via (TSV)/package-induced mechanical stress. The limited characterization/measurement capabilities for 3D IC stacks and a strict ''good die'' requirement make this type of analysis critical for the achievement of an acceptable level of functional and parametric yield and reliability. The paper focuses on the development of a design-for-manufacturability (DFM) type of methodology for managing mechanical stresses during a sequence of designs of 3D TSV-based dies, stacks and packages. A set of physics-based compact models for a multi-scale simulation to assess the mechanical stress across the device layers in silicon chips stacked and packaged with the 3D TSV technology is proposed. A calibration technique based on fitting to measured stress components and electrical characteristics of the test-chip devices is presented. A strategy for generation of a simulation feeding data and respective materials characterization approach are proposed, with the goal to generate a database for multi-scale material parameters of wafer-level and package-level structures. For model validation, high-resolution strain measurements in Si channels of the test-chip devices are needed. At the nanoscale, the transmission electron microscopy (TEM) is the only technique available for sub-10 nm strain measurements so far.

36 MATERIALS SCIENCE↗

SiGe Based Low Temperature Electronics for Lunar Surface Applications

The temperature at the permanently shadowed regions of the moon's surface is approximately -240 C. Other areas of the lunar surface experience temperatures that vary between 120 C and -180 C during the day and night respectively. To protect against the large temperature variations of the moon surface, traditional electronics used in lunar robotics systems are placed inside a thermally controlled housing which is bulky, consumes power and adds complexity to the integration and test. SiGe Based electronics have the capability to operate over wide temperature range like that of the lunar surface. Deploying low temperature SiGe electronics in a lander platform can minimize the need for the central thermal protection system and enable the development of a new generation of landers and mobility platforms with highly efficient distributed architecture. For the past five years a team consisting of NASA, university and industry researchers has been examining the low temperature and wide temperature characteristic of SiGe based transistors for developing electronics for wide temperature needs of NASA environments such as the Moon, Titan, Mars and Europa. This presentation reports on the status of the development of wide temperature SiGe based electronics for the landers and lunar surface mobility systems.

electonics↗

The effect of electron induced hydrogenation of graphene on its electrical transport properties

We report a deterioration of the electrical transport properties of a graphene field effect transistor due to energetic electron irradiation on a stack of Poly Methyl Methacrylate (PMMA) on graphene (PMMA/graphene bilayer). Prior to electron irradiation, we observed that the PMMA layer on graphene does not deteriorate the carrier transport of graphene but improves its electrical properties instead. As a result of the electron irradiation on the PMMA/graphene bilayer, the Raman “D” band appears after removal of PMMA. We argue that the degradation of the transport behavior originates from the binding of hydrogen generated during the PMMA backbone secession process.

36 MATERIALS SCIENCE↗

Operation of SOI P-Channel Field Effect Transistors, CHT-PMOS30, under Extreme Temperatures

Electronic systems are required to operate under extreme temperatures in NASA planetary exploration and deep space missions. Electronics on-board spacecraft must also tolerate thermal cycling between extreme temperatures. Thermal management means are usually included in today s spacecraft systems to provide adequate temperature for proper operation of the electronics. These measures, which may include heating elements, heat pipes, radiators, etc., however add to the complexity in the design of the system, increases its cost and weight, and affects its performance and reliability. Electronic parts and circuits capable of withstanding and operating under extreme temperatures would reflect in improvement in system s efficiency, reducing cost, and improving overall reliability. Semiconductor chips based on silicon-on-insulator (SOI) technology are designed mainly for high temperature applications and find extensive use in terrestrial well-logging fields. Their inherent design offers advantages over silicon devices in terms of reduced leakage currents, less power consumption, faster switching speeds, and good radiation tolerance. Little is known, however, about their performance at cryogenic temperatures and under wide thermal swings. Experimental investigation on the operation of SOI, N-channel field effect transistors under wide temperature range was reported earlier [1]. This work examines the performance of P-channel devices of these SOI transistors. The electronic part investigated in this work comprised of a Cissoid s CHT-PMOS30, high temperature P-channel MOSFET (metal-oxide semiconductor field-effect transistor) device [2]. This high voltage, medium-power transistor is designed for geothermal well logging applications, aerospace and avionics, and automotive industry, and is specified for operation in the temperature range of -55 C to +225 C. Table I shows some specifications of this transistor [2]. The CHT-PMOS30 device was characterized at various temperatures over the range of -190 C to +225 C in terms of its voltage/current characteristic curves. The test temperatures included +22, -50, -100, -150, -175, -190, +50, +100, +150, +175, +200, and +225 C. Limited thermal cycling testing was also performed on the device. These tests consisted of subjecting the transistor to a total of twelve thermal cycles between -190 C and +225 C. A temperature rate of change of 10 C/min and a soak time at the test temperature of 10 minutes were used throughout this work. Post-cycling measurements were also performed at selected temperatures. In addition, re-start capability at extreme temperatures, i.e. power switched on while the device was soaking for a period of 20 minutes at the test temperatures of -190 C and +225 C, was investigated.

Patterson, Richard↗

Quantitative spectromicroscopy from inelastically scattered photoelectrons in the hard X-ray range

We demonstrate quantitative, highly bulk-sensitive x-ray photoelectron emission microscopy by analysis of inelastically scattered photoelectrons in the hard X-ray range, enabling elemental depth distribution analysis in deeply buried layers. We show results on patterned structures used in electrical testing of high electron mobility power transistor devices with an epitaxial Al{sub 0.25}Ga{sub 0.75}N channel and a Ti/Al metal contact. From the image series taken over an energy range of up to 120 eV in the Ti 1s loss feature region and over a typical 100 μm field of view, one can accurately retrieve, using background analysis together with an optimized scattering cross-section, the Ti depth distribution from 14 nm up to 25 nm below the surface. The method paves the way to multi-elemental, bulk-sensitive 3D imaging and investigation of phenomena at deeply buried interfaces and microscopic scales by photoemission.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Processable High Electron Mobility {pi}-Copolymers via Mesoscale Backbone Conformational Ordering

The synthesis and experimental/theoretical characterization of a new series of electron-transporting copolymers based on the naphthalene bis(4,8-diamino-1,5-dicarboxyl)amide (NBA) building block are reported. Comonomers are designed to test the emergent effects of manipulating backbone torsional characteristics, and density functional theory (DFT) analysis reveals the key role of backbone conformation in optimizing electronic delocalization and transport. The NBA copolymer conformational and electronic properties are characterized using a broad array of molecular/macromolecular, thermal, optical, electrochemical, and charge transport techniques. All NBA copolymers exhibit strongly aggregated morphologies with significant nanoscale order. Copolymer charge transport properties are investigated in thin-film transistors and exhibit excellent electron mobilities ranging from 0.4 to 4.5 cm(2) V-1 s(-1). Importantly, the electron transport efficiency correlates with the film mesoscale order, which emerges from comonomer-dependent backbone planarity and extension. These results illuminate the key NBA building block structure-morphology-bulk property design relationships essential for processable, electronics-applicable high-performance polymeric semiconductors.

n‐↗

Molecular doping for control of gate bias stress in organic thin film transistors

The key active devices of future organic electronic circuits are organic thin film transistors (OTFTs). Reliability of OTFTs remains one of the most challenging obstacles to be overcome for broad commercial applications. In particular, bias stress was identified as the key instability under operation for numerous OTFT devices and interfaces. Despite a multitude of experimental observations, a comprehensive mechanism describing this behavior is still missing. Furthermore, controlled methods to overcome these instabilities are so far lacking. Here, we present the approach to control and significantly alleviate the bias stress effect by using molecular doping at low concentrations. For pentacene and silicon oxide as gate oxide, we are able to reduce the time constant of degradation by three orders of magnitude. The effect of molecular doping on the bias stress behavior is explained in terms of the shift of Fermi Level and, thus, exponentially reduced proton generation at the pentacene/oxide interface.

36 MATERIALS SCIENCE↗

Narrowing of band gap at source/drain contact scheme of nanoscale InAs–nMOS

A multi-scale simulation study of Ni/InAs nano-scale contact aimed for the sub-14 nm technology is carried out to understand material and transport properties at a metal-semiconductor interface. The deposited Ni metal contact on an 11 nm thick InAs channel forms an 8.5 nm thick InAs leaving a 2.5 nm thick InAs channel on a ptype doped (1x10(16) cm(-3)) AlAs 0.47 Sb 0.53 buffer. The density functional theory (DFT) calculations reveal a band gap narrowing in the InAs at the metal-semiconductor interface. The one-dimensional (1D) self-consistent Poisson-Schrodinger transport simulations using real-space material parameters extracted from the DFT calculations at the metal-semiconductor interface, exhibiting band gap narrowing, give a specific sheet resistance of R-sh= 90.9 Omega/sq which is in a good agreement with an experimental value of 97 Omega/sq.

ELECTRON-MOBILITY TRANSISTORS↗

Bottom‐Up Synthesized Nanoporous Graphene Transistors

Abstract Nanoporous graphene (NPG) can exhibit a uniform electronic band gap and rationally‐engineered emergent electronic properties, promising for electronic devices such as field‐effect transistors (FETs), when synthesized with atomic precision. Bottom‐up, on‐surface synthetic approaches developed for graphene nanoribbons (GNRs) now provide the necessary atomic precision in NPG formation to access these desirable properties. However, the potential of bottom‐up synthesized NPG for electronic devices has remained largely unexplored to date. Here, FETs based on bottom‐up synthesized chevron‐type NPG (C‐NPG), consisting of ordered arrays of nanopores defined by laterally connected chevron GNRs, are demonstrated. C‐NPG FETs show excellent switching performance with on–off ratios exceeding 10 4 , which are tightly linked to the structural quality of C‐NPG. The devices operate as p‐type transistors in the air, while n‐type transport is observed when measured under vacuum, which is associated with reversible adsorption of gases or moisture. Theoretical analysis of charge transport in C‐NPG is also performed through electronic structure and transport calculations, which reveal strong conductance anisotropy effects in C‐NPG. The present study provides important insights into the design of high‐performance graphene‐based electronic devices where ballistic conductance and conduction anisotropy are achieved, which could be used in logic applications, and ultra‐sensitive sensors for chemical or biological detection.

Mutlu, Zafer↗

Growth-substrate induced performance degradation in chemically synthesized monolayer MoS{sub 2} field effect transistors

We report on the electronic transport properties of single-layer thick chemical vapor deposition (CVD) grown molybdenum disulfide (MoS{sub 2}) field-effect transistors (FETs) on Si/SiO{sub 2} substrates. MoS{sub 2} has been extensively investigated for the past two years as a potential semiconductor analogue to graphene. To date, MoS{sub 2} samples prepared via mechanical exfoliation have demonstrated field-effect mobility values which are significantly higher than that of CVD-grown MoS{sub 2}. In this study, we will show that the intrinsic electronic performance of CVD-grown MoS{sub 2} is equal or superior to that of exfoliated material and has been possibly masked by a combination of interfacial contamination on the growth substrate and residual tensile strain resulting from the high-temperature growth process. We are able to quantify this strain in the as-grown material using pre- and post-transfer metrology and microscopy of the same crystals. Moreover, temperature-dependent electrical measurements made on as-grown and transferred MoS{sub 2} devices following an identical fabrication process demonstrate the improvement in field-effect mobility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomically Defined Edge-Doping of Graphene Nanoribbons for Mesoscale Electronics

The outstanding transformative potential of graphene, an infinite two-dimensional sheet of carbon atoms tightly packed into a honeycomb lattice, has been recognized mostly due to its exceptionally high electric conductivity, thermal conductivity, and tensile strength. These undeniably very desirable properties, however, represent only a very small facet of the true potential of all-sp2 carbon materials and its promise to revolutionize the field of molecular electronics. Graphene's most unusual characteristics emerge when the infinite macroscopic sheet is scaled down to nanometer dimensions. The exploration, realization, and implementation of these truly exotic magnetic and electronic properties rely on the development of innovative synthetic strategies that provide atomically precise control over the self-assembly of mesoscale objects. While traditional device architectures based on inorganic semiconductors have been fabricated using a top-down approach, we pursued a diametrically opposite strategy. Our design of a new generation of high-performance electronic materials relies on a modular bottom-up strategy. This highly multidisciplinary research program has been rooted in the synthesis of functional organic materials with precisely defined properties, their controlled assembly into hierarchical structures, and the evaluation of their performance at the molecular and the macroscopic scale. A part of this research program we have developed the chemical tools required to synthesize and to fine-tune the physical properties of graphene nanoribbons (GNR) with atomic precision. We further demonstrated that the innovative techniques and the expanded knowledge can be used to rationally tailor desired physical properties and function into nanometer-scale carbon-based electronic devices; e.g. transistors as logic gates in computing, data storage media based on electrically gated spin valves, or molecular amplifiers, all functionally integrated in atomically defined GNRs. We demonstrated the design and experimental realization of a rationally engineered graphene nanoribbon superlattice that hosts a 1D array of symmetry-protected topological states. We developed a hierarchical bottom-up fabrication strategy for graphene nanoribbons that preferentially exhibit a single heterojunction interface rather than a random statistical sequence of junctions along the ribbon. We reported the bottom-up synthesis of a series of atomically precise graphene nanoribbons featuring trigonal planar heteroatom dopants (nitrogen, oxygen, and sulfur) along the edges that induce a narrowing of the intrinsic band gap by ~0.2–0.3 eV per dopant atom. We reported the bottom-up synthesis of a graphene nanoribbon heterostructure featuring a highly tunable porphyrin quantum dot embedded at the center of a solution processable graphene nanoribbon. We reported a new technique for fabricating bottom-up graphene nanoribbon heterojunctions through a late-stage chemical transformation that results in atomically sharp heterojunction structures from a single precursor. We demonstrated the intrinsic performance enhancement of a composite material comprised of gold nanoparticles (AuNPs) embedded in a bottom-up synthesized graphene nanoribbon matrix for the electrocatalytic reduction of CO 2 . We developed a scalable, solution-based approach toward the synthesis of an exotic class of polycyclic aromatic hydrocarbons that exhibit unusual electronic and magnetic properties in the ground state. We reported the bottom-up synthesis and characterization of atomically-defined graphene nanoribbons featuring a regioregular pattern of group III dopant atoms (boron) along the backbone of the ribbon.

36 MATERIALS SCIENCE↗

The behavior of off-state stress-induced electrons trapped at the buffer layer in AlGaN/GaN heterostructure field effect transistors

A measurement methodology involving the synchronous switching of gate to source voltage and drain to source voltage (V{sub DS}) was proposed for determining the shift of threshold voltage after an AlGaN/GaN heterostructure transistor endures high V{sub DS} off-state stress. The measurement results indicated slow electron detrapping behavior. The trap level was determined as (E{sub C} – 0.6 eV). Simulation tool was used to analyze the measurement results. The simulation results were consistent with the experimental results; and a relationship between the buffer trap and threshold voltage shift over time was observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Detection of a 2.8 THz quantum cascade laser with a semiconductor nanowire field-effect transistor coupled to a bow-tie antenna

The use of a high-electron mobility semiconductor nanowire as transistor channel has recently allowed the extension of the spectral coverage of THz field-effect transistor detectors up to 1.5 THz. In this report, we demonstrate efficient operation of a field-effect transistor detector based on a semiconductor nanowire at a much higher frequency, 2.8 THz, with a responsivity ≈5 V/W in a bandwidth ≈100 kHz, thus proving the full potential of such approach for the detection of THz quantum cascade lasers. Finally, such a THz sensing system is exploited to perform raster scan transmission imaging, with high spatial resolution, signal-to-noise ratio, and acquisition rate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Large electron concentration modulation using capacitance enhancement in SrTiO{sub 3}/SmTiO{sub 3} Fin-field effect transistors

Solid-state modulation of 2-dimensional electron gases (2DEGs) with extreme (∼3.3 × 10{sup 14 }cm{sup −2}) densities corresponding to 1/2 electron per interface unit cell at complex oxide heterointerfaces (such as SrTiO{sub 3}/GdTiO{sub 3} or SrTiO{sub 3}/SmTiO{sub 3}) is challenging because it requires enormous gate capacitances. One way to achieve large gate capacitances is by geometrical capacitance enhancement in fin structures. In this work, we fabricate both Au-gated planar field effect transistors (FETs) and Fin-FETs with varying fin-widths on 60 nm SrTiO{sub 3}/5 nm SmTiO{sub 3} thin films grown by hybrid molecular beam epitaxy. We find that the FinFETs exhibit higher gate capacitance compared to planar FETs. By scaling down the SrTiO{sub 3}/SmTiO{sub 3} fin widths, we demonstrate further gate capacitance enhancement, almost twice compared to the planar FETs. In the FinFETs with narrowest fin-widths, we demonstrate a record 2DEG electron concentration modulation of ∼2.4 × 10{sup 14 }cm{sup −2}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novamene: A new class of carbon allotropes

We announce a new class of carbon allotropes. The basis of this new classification resides on the concept of combining hexagonal diamond (sp3 bonded carbon - lonsdaleite) and ring carbon (sp2 bonded carbon - graphene). Since hexagonal diamond acts as an insulator and sp2 bonded rings act as conductors, these predicted materials have potential applications for transistors and other electronic components. We describe the structure of a proposed series of carbon allotropes, novamene, and carry out a detailed computational analysis of the structural and electronic properties of the simplest compound in this class: the single-ring novamene. In addition, we suggest how hundreds of different allotropes of carbon could be constructed within this class.

36 MATERIALS SCIENCE↗

High Dielectric Constant Polycarbonate/Nylon Multilayer Films Capacitors with Self-Healing Capability

With the fast development of high-temperature metal oxide semiconductor field effect transistors for power electronics in electric vehicles, current state-of-the-art biaxially oriented polypropylene (BOPP) film capacitors need further improvement because they have a temperature rating of only 85 °C without derating the voltage to maintain a long lifetime. If a high-temperature polymer can replace BOPP without sacrificing the overall dielectric performance and cost, it is possible to remove the current water-cooling system for capacitors and significantly reduce the cost of the power electronic unit. In this work, we demonstrated new polycarbonate (PC)/nylon multilayer films (MLFs), which has a potential for even higher temperature rating because of the higher melting temperature for nylons (e.g., nylon-6). Structural and dielectric studies showed that these PC/nylon MLFs had a similar dielectric performance, such as dielectric constant, dielectric loss, and breakdown strength, as the PC/poly(vinylidene fluoride) PVDF MLFs, which were developed in the past. These PC/nylon MLFs could perform well up to 120 °C, which was limited by the glass transition temperature of PC at 145 °C. Here, more intriguingly, packaged PC/nylon-12 MLF capacitors exhibited a self-healing capability, which had been difficult for packaged high-temperature film capacitors. Because self-healing is such a fundamental requirement for polymer film capacitors, our PC/nylon MLFs offer a potential for next-generation high-temperature and high-energy density film capacitors.

36 MATERIALS SCIENCE↗

Novel Approach to Conformal FINFET Extension Doping

This paper presents a novel strategy to achieve conformal FINFET extension doping with low tilt-angle beam-line ion implantation. The process relies on the self-aligned cap layer formation exclusively on top of the FIN to tune doping levels in this particular area by partial dopant trapping. The conformality itself is evaluated for n- and p-type dopants by a novel extraction method applied to FIN resistor test structures. Furthermore, the process was integrated into a full NMOS device flow and compared to a highly tilted and more conformal As implant condition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and independent control of patterned polymer gate for a few-layer WSe{sub 2} field-effect transistor

We report the fabrication of a patterned polymer electrolyte for a two-dimensional (2D) semiconductor, few-layer tungsten diselenide (WSe{sub 2}) field-effect transistor (FET). We expose an electron-beam in a desirable region to form the patterned structure. The WSe{sub 2} FET acts as a p-type semiconductor in both bare and polymer-covered devices. We observe a highly efficient gating effect in the polymer-patterned device with independent gate control. The patterned polymer gate operates successfully in a molybdenum disulfide (MoS{sub 2}) FET, indicating the potential for general applications to 2D semiconductors. The results of this study can contribute to large-scale integration and better flexibility in transition metal dichalcogenide (TMD)-based electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗