Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

An emission mechanism for the Io-independent Jovian decameter radiation

A theory of the Io-independent decameter radiation is developed. The radiation results from excitation of the electromagnetic loss-cone instability by keV electrons, stably trapped near L = 6. The radiation is excited in Band 3 of the extraordinary mode. When the effects of refraction are estimated, it is shown that above 10 MHz radiation is beamed into the equatorial plane in a wide, but thin, conical sheet (Psi approximately equals 80 degrees). When the instability analysis is coupled with one of the octupole models of the Jovian magnetic field, the maximum convective growth of the instability occurs in the directions of the non-Io A, B, and C sources. The shape of the peak radio flux frequency spectrum is found to be a consequence of the loss cone shape of the electron distribution function.

Goldstein, M. L.↗

An emission mechanism for the Io-independent Jovian decameter radiation

A theory of the Io-independent decameter radiation is developed. The radiation results from excitation of the electromagnetic loss-cone instability by keV electrons, stably trapped near L = 6. The radiation is excited in band III of the extraordinary mode. When the effects of refraction are estimated, it is shown that above 10 MHz radiation is beamed into the equatorial plane in a wide, but thin, conical sheet. When the instability analysis is coupled with one of the octopole models of the Jovian magnetic field, the maximum convective growth of the instability occurs in the directions of the non-Io A, B, and C sources. The shape of the peak radio flux frequency spectrum is found to be a consequence of the loss-cone shape of the electron distribution function.

Goldstein, M. L.↗

Micromachined TWTs for THz Radiation Sources

The Terahertz (THz) region of the electromagnetic spectrum (about 300 - 3000 GHz in frequency or about 0.1 - 1 mm free space wavelength) has enormous potential for high-data-rate communications, spectroscopy, astronomy, space research, medicine, biology, surveillance, remote sensing, industrial process control, etc. It has been characterized as the most scientifically rich, yet under-utilized, region of the electromagnetic spectrum. The most critical roadblock to full exploitation of the THz band is lack of coherent radiation sources that are powerful (0.001 - 1.0 W continuous wave), efficient (> 1%), frequency agile (instantaneously tunable over 1% bandwidths or more), reliable, and comparatively inexpensive. To develop vacuum electron device (VED) radiation sources satisfying these requirements, fabrication and packaging approaches must be heavily considered to minimize costs, in addition to the basic interaction physics and circuit design. To minimize size of the prime power supply, beam voltage must be minimized, preferably 10 kV. Solid state sources satisfy the low voltage requirement, but are many orders of magnitude below power, efficiency, and bandwidth requirements. On the other hand, typical fast-wave VED sources in this regime (e.g., gyrotrons, FELs) tend to be large, expensive, high voltage and very high power devices unsuitable for most of the applications cited above. VEDs based on grating or inter-digital (ID) circuits have been researched and developed. However, achieving forward-wave amplifier operation with instantaneous fractional bandwidths > 1% is problematic for these devices with low-energy (< 15 kV) electron beams. Moreover, the interaction impedance is quite low unless the beam-circuit spacing is kept particularly narrow, often leading to significant beam interception. One solution to satisfy the THz source requirements mentioned above is to develop micromachined VEDs, or "micro-VEDs". Among other benefits, micro-machining technologies provide superior high frequency wall conductivity as a result of superior surface smoothness compared with conventional mechanical or electric discharge machining approaches. Micro-VED technologies are already being applied to the development of millimeter-wave klystrons at Stanford Linear Accelerator Center and submillimeter-wave klystrons at the University of Leeds. We are investigating the use of micro-machining technologies to develop THz regime TWTs, with emphasis on folded-waveguide TWTs. The folded-waveguide TWT (FW-TWT) has several features that make it attractive for THz-regime micro-VED applications. It is a relatively simple circuit to design and fabricate, it is amenable to precision pattern replication by micro-machining, and it is has been demonstrated capable of forward-wave amplification with appreciable bandwidth. We are conducting experimental and computational studies of micro-VED FW-TWTs to examine their feasibility for applications at frequencies from 200 - 1000 GHz.

Booske, John H.↗

Thermal radiation heat transfer.

A comprehensive discussion of heat transfer by thermal radiation is presented, including the radiative behavior of materials, radiation between surfaces, and gas radiation. Among the topics considered are property prediction by electromagnetic theory, the observed properties of solid materials, radiation in the presence of other modes of energy transfer, the equations of transfer for an absorbing-emitting gas, and radiative transfer in scattering and absorbing media. Also considered are radiation exchange between black isothermal surfaces, radiation exchange in enclosures composed of diffuse gray surfaces and in enclosures having some specularly reflecting surfaces, and radiation exchange between nondiffuse nongray surfaces. The use of the Monte Carlo technique in solving radiant-exchange problems and problems of radiative transfer through absorbing-emitting media is explained.

Siegel, R.↗

Gyrosynchrotron radiation and its transfer in a magnetoactive plasma.

Gyrosynchrotron radiation fields from mildly relativistic electrons in a magnetoactive plasma are asymptotically calculated by using the Green tensor and the Fourier transformation. These fields consist of the two components which correspond to the ordinary and extraordinary modes. Taking into account these fields, the emissivities and the absorption coefficients from an arbitrary distribution of electrons are calculated in order to discuss the intensity, spectrum, and polarization of gyrosynchrotron radiation. In general, the transfer of electromagnetic energy takes place along a direction different from that of the wave normal since the radiation fields have a nonvanishing component along the direction of the wave normal. A consideration is given on the problem of radiative transfer in relation to the Stokes parameters.

Sakurai, K.↗

Overview of active methods for shielding spacecraft from energetic space radiation

During the 1960's and into the early 1970's, investigations were conducted related to the feasibility of using active radiation shielding methods, such as afforded by electromagnetic fields, as alternatives to passive, bulk material shielding to attenuate space radiations. These active concepts fall into four categories: (1) electrostatic fields; (2) plasma shields; (3) confined magnetic fields; and (4) unconfined magnetic fields. In nearly all of these investigations, consideration was given only to shielding against protons or electrons, or both. During the 1980's and 1990's there were additional studies related to proton shielding and some new studies regarding the efficacy of using active methods to shield from the high energy heavy ion (HZE particle) component of the galactic cosmic ray spectrum. In this overview, each concept category is reviewed and its applicability and limitations for the various types of space radiations are described. Recommendations for future research on this topic are made.

NASA Discipline Radiation Health↗

An investigation of conducted and radiated emissions from a hollow-cathode plasma contactor

An investigation conducted on the electrical interference induced by the operation of a hollow-cathode plasma contractor in a ground-based facility is described. The types of electrical interference, or noise, which are important to Space Station Freedom designers are classified as either conducted or radiated emissions. The procedures required to perform conducted and radiated emission measurements on a plasma contactor are examined. The experimental data obtained are typically examined in the frequency domain (i.e. amplitudes of the noise fluctuations versus frequency). Results presented indicate the conducted emissions, which are the current fluctuations from the contactor into the space station wiring, are affected by operating parameters such as expellant flow rate and discharge current. The radiated emissions, which are the electromagnetic waves induced and emitted by the contactor, appear to be influenced by the contactor emission current. Other experimental results suggest possible sources which are responsible for the observed noise. For example, the influence of the plasma environment downstream from the contactor on noise emission levels is described. In addition, a brief discussion is given on the correlation between conducted and radiated emissions and the mechanisms through which both are influenced by the plasma downstream of the contactor.

Buchholtz, Brett W.↗

NASA's Moon to Mars Autonomous Habitat Status

NASA is developing a strategy for sending humans to the Mars vicinity, known broadly as the Moon to Mars (M2M) Campaign. A critical part of this campaign is the development of in-space and surface habitation systems capable of substantially extending human presence beyond Low Earth Orbit (LEO). Mars missions feature an in-space transit habitat capable of supporting crews of four on ~850-1200-day missions, including transit to and from Mars and time in Mars orbit. Surface and transit habitats are complex elements which must keep crewmembers healthy and productive in deep-space environments with limited resources, long rescue times in contingency situations, and communication delays; all within constrained mass, volume, and power budgets. These habitats provide crew both living and workspace as well as most of the resources needed to support crew life. For deep space habitats, automation needs to be employed due to latency and for significant amounts of time when the habitats are uncrewed. Automation of systems is possible in space applications, but there are limitations. Outside of the Earth’s (or any) magnetosphere, radiation environments are harsh to both the physical hardware and the software components. Radiation (charged particles and ionizing electromagnetic waves) degrades and damages the hardware and causes single event upsets (SEUs) in software. If the hardware is damaged, data can be lost, or control actions not made. For software, SEUs cause algorithms to result in different solutions, or incorrect commands to be sent out. This means that algorithms and hardware used for deep space systems are different than what is used on Earth. Radiation-tolerant hardware is generations behind the current state-of-the-art hardware. Recent NASA missions, such as James Webb Space Telescope, continue to rely on older technologies such as the RAD750 processor, and the most advanced processors are still single core and less than 1.5 GHz. There have been attempts to use higher performance processors, but these often take multiple mitigation steps to handle the radiation environments, which limits the processing power and/or throughput. Current techniques for radiation mitigation have been redundancies, voting, physical separation of hardware, encasing materials, under-clocking hardware, and more. Some radiation mitigation techniques do provide benefits such as having a redundant system to improve the probability that a system will be available when needed. Autonomous software systems will have fewer interactions with humans on deep space missions and therefore need to be able to handle more off-nominal conditions. Microgravity also complicates the autonomous aspects of the mission because autonomous systems are usually built from known deterministic states, but microgravity causes physical objects to shift and move changing the location an autonomous system placed the object. Not only does the software need to be reliable and deterministic, losing resources due to a software error is not only costly but detrimental to reputation. The combination of having lower performance hardware and having to be able to verify and deterministically run software and an ever-changing environment makes deep space autonomous systems more complicated. Multiple gaps have been identified including verification of autonomous software algorithms (including artificial intelligence and machine learning), higher performance processors (graphics and general purpose), high speed networks (onboard and transmissions), memory, power distribution, data security, and variations from these. These gaps need to be closed for more advanced systems to be deployed and reduce the size, weight, and power impacts on the habitats.

Scott B. Tashakkor↗

Theory of microwave remote sensing

Active and passive microwave remote sensing of earth terrains is studied. Electromagnetic wave scattering and emission from stratified media and rough surfaces are considered with particular application to the remote sensing of soil moisture. Radiative transfer theory for both the random and discrete scatterer models is examined. Vector radiative transfer equations for nonspherical particles are developed for both active and passive remote sensing. Single and multiple scattering solutions are illustrated with applications to remote sensing problems. Analytical wave theory using the Dyson and Bethe-Salpeter equations is employed to treat scattering by random media. The backscattering enhancement effects, strong permittivity fluctuation theory, and modified radiative transfer equations are addressed. The electromagnetic wave scattering from a dense distribution of discrete scatterers is studied. The effective propagation constants and backscattering coefficients are calculated and illustrated for dense media.

Tsang, L.↗

Theory of 2 omega(sub pe) radiation induced by the bow shock

A new radiation emission mechanism is proposed to explain electomagnetic radiation observed at twice the electron plasma frequency, 2 omega(sub pe), in the upstream region of the Earth's bow shock. This radiation had its origin at the electron foreshock boundary where energetic electron beams and intense narrow-band Langmiur waves are observed. The proposed emission mechanism results from the interaction of the electron beam and Langmuir waves that are backscattered off thermal ions. This interaction is described by a nonlinear dispersion equation which incorporates an effect owing to electron trajectory modulation by the backscattered Langmuir waves. Subsequent analysis of the dispersion equation reveals two important consequences. First, a long-wavelength electrostatic quasi-mode with frequency at 2 omega(sub pe) is excited, and second, the quasi-mode and the electomagnetic mode are nonlinearly coupled. The implication is that, when the excited 2 omega(sub pe) quasi-mode propagates in an inhomgeneous medium with slightly decreasing density, the quasi-mode can be converted directly into an electromagnetic mode. Hense the electomagnetic radiation at twice the plasma frequency is generated. Numerical solutions of the dispersion equation with the choice of parameters that describe physical characteristics of the electron foreshock are presented, which illustrates the viability of the new mechanism.

Yoon, Peter H.↗

Analysis of a Lunar Base Electrostatic Radiation Shield Concept

Space weather can be defined as the total ensemble of radiation in space, as well as on the surface of moons and asteroids. It consists of electromagnetic, charged-particle, and neutral particle radiation. The fundamental goal behind this NIAC Phase I research is to investigate methods of generating a static electric-field potential phi(x, y, z) in the volume above and around a "safe" or protected area on the lunar surface so that trajectories of harmful charged particle radiation are modified (deflected or reflected), thus creating a shadow over that region. Since the charged particles are not neutralized but merely redirected, there will be areas outside of the shadowed protected region that will have a higher flux concentration of radiation. One of the fundamental limitations of the static electric (electrostatic)-field approach to radiation shielding is that complete shadowing is accomplished only by complete reflection, which can only occur for shield voltages greater than or equal to the kinetic energy (in electron volts) of the incoming charged particles. Just as habitats on Earth are protected from severe weather events and conditions, such as extreme temperatures, high winds, and UV radiation, using multiple methods of shielding protection from severe space weather will undoubtedly require multiple strategies. The electrostatic shield concept may be one of many methods employed to protect astronaut habitats on the lunar surface from some of the harmful effects of space weather.

Buhler, Charles R.↗

On the Connection Between Microbursts and Nonlinear Electronic Structures in Planetary Radiation Belts

Using a dynamical-system approach, we have investigated the efficiency of large-amplitude whistler waves for causing microburst precipitation in planetary radiation belts by modeling the microburst energy and particle fluxes produced as a result of nonlinear wave-particle interactions. We show that wave parameters, consistent with large amplitude oblique whistlers, can commonly generate microbursts of electrons with hundreds of keV-energies as a result of Landau trapping. Relativistic microbursts (greater than 1 MeV) can also be generated by a similar mechanism, but require waves with large propagation angles Theta (sub k)B greater than 50 degrees and phase-speeds v(sub phi) greater than or equal to c/9. Using our result for precipitating density and energy fluxes, we argue that holes in the distribution function of electrons near the magnetic mirror point can result in the generation of double layers and electron solitary holes consistent in scales (of the order of Debye lengths) to nonlinear structures observed in the radiation belts by the Van Allen Probes. Our results indicate a relationship between nonlinear electrostatic and electromagnetic structures in the dynamics of planetary radiation belts and their role in the cyclical production of energetic electrons (E greater than or equal to 100 keV) on kinetic timescales, which is much faster than previously inferred.

plasmas↗

Induced gyroresonant emission of extraordinary mode radiation

Induced amplification of extraordinary-mode electromagnetic waves in a magnetized plasma is investigated. The analysis is performed for a plasma which consists of two components: a relatively dense species of thermal plasma and a diffuse population of suprathermal electrons characterized by a loss cone-type distribution. The excitation mechanism is primarily due to the interaction of the electromagnetic waves with the energetic electrons via the relativistic cyclotron resonance which arises because of the momentum dependence of the gyrofrequency. The present study is particularly concerned with waves propagating perpendicularly and nearly perpendicularly with respect to the external magnetic field, since it is expected that for these cases the cyclotron damping due to thermal electrons is vanishingly small and the growth rates are maximum. The results indicate that excitation occurs primarily for frequencies near the first two gyroharmonics.

Freund, H. P.↗

Electromagnetic scattering by discrete random media illuminated by a Gaussian beam I: Derivation of the radiative transfer equation

In this paper we present the vector radiative transfer theory for a discrete random medium illuminated by a Gaussian beam. The analysis is based on a plane wave spectrum representation for a Gaussian beam and uses an approach developed previously for a discrete random medium illuminated by a plane electromagnetic wave. Specifically, we establish an integral representation for the coherent field, define an approximate coherent field that satisfies the differential equation fulfilled by the coherent field corresponding to a plane electromagnetic wave and matches the Gaussian beam at the interface of the particulate medium, and finally, derive the vector radiative transfer equation. For weakly focused Gaussian beams, the resulting equation is the traditional radiative transfer equation

Gaussian beam↗

X-ray inverse Compton emission from the radio halo of M87

A significant fraction of known galaxies contain an active galactic nucleus (AGN) at their cores, the site of violent activity and non-stellar radiation seen across the entire electromagnetic spectrum. This activity is thought to be due to the accretion of gas onto a massive black hole. A fraction of AGNs also eject collimated beams of energetic material, usually seen by virtue of its synchrotron emission in the radio band. Efforts to study these jets from AGNs in the X-ray band with the Einstein Observatory has led to several detections, most notably the jets in the nearby radio galaxies Centaurus A and Virgo A = M87. In their study of M87, Schreier, Gorenstein and Feigelson (1982) noted that, in addition to the synchrotron jet 10"-20" from the nucleus, X-rays appear to be generated in the diffuse radio halo 2'-5' from the nucleus. This finding may be particularly important as it may constitute the first known case of X-ray inverse Compton emission from AGN ejecta, allowing for the first time direct determination of the magnetic field strengths.

Feigelson, E. D.↗