Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Drilling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Prediction of gas hydrate saturation using machine learning and optimal set of well-logs

We report resistivity and acoustic logs are widely used to estimate gas hydrate saturation in various sedimentary systems using one of the two popular methods ((1) acoustic velocity and (2) electrical resistivity), but the limitations of these two methods are often overlooked, which include (i) well-specific calibration of empirical exponents in the electrical resistivity method, (ii) assumption of known pore morphology for gas hydrates in the acoustic velocity method, and (iii) presence of unknown mineralogy and bulk modulus terms in the acoustic velocity method. NMR-density porosity-derived gas hydrate saturation based on the analysis of the transverse magnetization relaxation time (T2) is considered the most precise method, but acquisition of NMR-based logs is limited at relatively recent drilled sites; additionally, its use in conventional oil and gas reservoirs is not that common due to higher cost and operational deployment limitations associated with acquiring NMR well-logs. This study proposes a new method that predicts gas hydrate saturation (S h ) for any well using porosity, bulk density, and compressional wave (P wave) velocity well-logs with neural network (or stochastic gradient descent regression) without any well-specific calibration and/or other aforementioned shortcomings of the existing methods. The method is developed by examining the underlying dependency between S h and different combinations of well-logs, chosen from 6 routine logs, with 12 different machine learning (ML) algorithms. The accuracy of the proposed method in predicting S h is ~ 84%, which is better than the accuracy of seismic and electrical resistivity methods (≤ 75%) per the results reported by three different studies. The robustness of the method in the specific case of permafrost-associated gas hydrates is demonstrated with well-log data from two wells drilled on the Alaska North Slope.

58 GEOSCIENCES↗
DOE OSTI2021

Microstructure and water absorption of ancient concrete from Pompeii: An integrated synchrotron microtomography and neutron radiography characterization

There is renewed interest in using advanced techniques to characterize ancient Roman concrete due to its exceptional durability and low-carbon footprint. In the present work, samples were drilled from the “Hospitium” in Pompeii and were analyzed by synchrotron microtomography (μCT) and neutron radiography to study how the microstructure, including the presence of induced cracks, affects their water adsorption. The water distribution and absorptivity were quantified by neutron radiography. The 3D crack propagation, pore size distribution and orientation, tortuosity, and connectivity were analyzed from μCT results using advanced imaging methods. Porosity was also measured by mercury intrusion porosimetry (MIP) as a reference. Ductile fracture patterns were observed once cracks were introduced. Compared to Portland cement mortar/concrete, the Pompeii samples had relatively high porosity, low connectivity, and a similar coefficient of capillary penetration. In addition, permeability was predicted from models based on percolation theory and pore structure data to evaluate the fluid transport properties. Understanding the microstructure of ancient Pompeii concrete is important because it could inspire the development of modern concrete with high durability.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Time-dependent thermal degradation of lost circulation materials in geothermal systems

Treatment of lost circulation can represent anywhere from 5 to 25 % of the cost in drilling geothermal wells. The cost of the materials used for lost circulation treatment is less important than their effectiveness at reducing fluid losses. In geothermal systems, the high temperatures (>90 °C) are expected to degrade many commonly used lost circulation materials over time. This degradation could compromise different materials ability to mitigate fluid loss, creating more non-productive time as multiple treatments are needed, but may result in recovering desired permeability zones within the reservoir section over time. This research aimed to study how thermal degradation of eight different lost circulation materials affected their properties relevant to sealing loss zones in geothermal wells. Here, mass loss experiments were conducted with each material at temperatures of 90–250 °C for 1–42 days to measure the breakdown of the material at geothermal conditions, collecting gases during several experiments to determine the waste produced during degradation. Compaction experiments were conducted with the degraded materials to show how temperatures reduced the rigidity and increased packing of the materials. Viscosity tests were conducted to show the impact of different materials on drilling fluid rheology. Microscope observations were conducted to characterize the alterations to each material due to thermal degradation. Organic materials tend to degrade more than inorganic materials, with organics like microcellulose, cotton seed hulls and sawdust losing 30–50 % of their mass after 1 day of heating at 200 °C, while inorganics like magma fiber only lose ~5–10 % of its mass after one day of heating at 200 °C. Granular materials are the strongest when compacted despite any mass loss, while fibrous and flaky materials are fairly weak and breakdown easily under stress. The materials do not generally affect fluid rheology unless they have a viscosifying agent as part of the mixture. Microscopic analysis showed that more rigid materials like microcellulose and cedar fiber degrade in brittle manners with splitting and fracturing, while others like cotton seed hulls degrade in more ductile manners forming meshes or clumps of material. The thermal breakdown of lost circulation materials tested suggests that each material should also be classified by its degree of thermal degradability, as at certain temperatures the materials can lose the capability to bridge loss zones around the wellbore.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Historic and modern approaches for discovery of abandoned wells for methane emissions mitigation in Oil Creek State Park, Pennsylvania

Hundreds of oil wells were drilled along Oil Creek in Pennsylvania in the mid-16 1800s, birthing the modern oil industry. No longer in operation, many wells are now classified as abandoned, and, due to their age, their locations are either unknown or inaccurately recorded. These historic well sites present environmental, safety, and economic concerns in the form of possible methane leaks and physical hazards. Airborne magnetic and LiDAR surveys were conducted in the Pioneer Run watershed in Oil Creek State Park to find abandoned wells in a historically significant but physically challenging location. Wells were drilled in this area prior to modern geolocation and legal documentation. Although a large number of old wells were abandoned summarily without remediation of the site, much of the land area within Oil Creek State Park is now covered in trees and dense underbrush, which can obscure wellheads. The thick vegetation and steep terrain limited the possibility of ground-based surveys to easily find well sites for methane emissions studies. The data from remote sensing surveys were used to corroborate potential well locations from historic maps and photographs. Potential well sites were verified in a ground-based field survey and monitored for methane emissions. Two historic photographs documenting oil activity in the late 1800s were georeferenced using a combination of magnetic and LiDAR data. LiDAR data, which were more useful in georeferencing and in field verification, identified 290 field locations in the Pioneer Run watershed, 86% of which were possible well sites. Sixty-two percent of the ground-verified wells remained unplugged and comprised the majority of leaking wells. The mean methane emissions factor for unplugged wells was 0.027 ± 0.099 kg/day, lower than other Appalachian Basin methane emissions estimates. LiDAR was used for the first time, in combination with an airborne magnetic survey, to reveal underground oil industry features and inform well identification and remediation efforts in difficult-to-navigate regions. In the oldest oil fields, where well casing has been removed or wood conductor casing was installed, historic photographs provide additional lines of evidence for oil wells where ground disturbances have concealed surface features. Identification of well sites is necessary for mitigation efforts, as unplugged wells emit methane, a potent greenhouse gas.

02 PETROLEUM↗
DOE OSTI2020

Optimal methods for preparation, separation, and determination of radium isotopes in environmental and biological samples

In recent years, radium has attracted considerable attention primarily because of the rapid increase in unconventional (fracking) drilling technology in the United States and around the world. One of the major radionuclides of interest in unconventional drilling wastes is radium isotopes ( 224 Ra, 226 Ra, 228 Ra). To access long-term risks associated with radium isotopes entering into the environment, accurate measurements of radium isotopes in environmental and biological samples are crucial. This article reviews many aspects of radium chemistry, which includes recent developments in radiochemical separations methods, advancements in analytical techniques followed by a more detailed discussion on the recent trends in radium determination.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Modeling of linear nanopores in a-SiO 2 tuning pore surface structure

Here, new strategies are presented for the generation of models for linear nanopores in amorphous silica (a-SiO 2 ) with surface structure tuned to match experimental observations. Specifically, the models successfully target not only the overall density of surface silanol groups, but also the proportion of geminal versus mono silanols for which additional experimental NMR data is reported. The latter quantity has not been appropriately described in previous modeling, and in fact has typically not been considered. Strategies include “pore drilling” of bulk a-SiO 2 , and “cylindrical resist” methodology forming a-SiO 2 around a cylindrical exclusion region, followed by dehydroxylation and hydroxylation processes, respectively. However, these latter processes must be judiciously tailored in order to tune the proportion of geminals, in addition to the overall silanol density, to achieve experimental values. Such tailoring has not been incorporated into previous modeling. Another approach considered tunes surface structure of pores obtained by “pore drilling” through mild annealing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Identifying Abandoned Well Sites Using Database Records and Aeromagnetic Surveys

Oil and natural gas are primary sources of energy in the United States. Improved drilling and extracting techniques have led to a renewed interest in historic oil and gas fields, but limited records of legacy wells make new drilling efforts more difficult, as abandoned wells may provide conduits for liquids and gases to migrate into groundwater reservoirs or the atmosphere. Well finding using aeromagnetic surveys pinpoints the location of steel-cased wells, detecting both active and abandoned wells, including buried casings lacking aboveground markers. Here, we present six aeromagnetic surveys conducted in Pennsylvania and Wyoming as case studies, comparing the magnetic points to locations known in databases. In all study sites, more magnetic points were detected than recorded in databases. Based on differences between theoretical database well counts and the actual number of wells detected in surveys, we estimated the total number of wells in Pennsylvania to be 395 000–466 000 and 181 000–182 000 in Wyoming. Extrapolating to the national level, in this work, we estimate the average number of wells in the continental United States is 6.04 ± 19.97 million wells with 1.16 ± 3.84 million of those designated as abandoned wells, within the range of previous abandoned well count estimations. Although aeromagnetic surveys are limited to detecting steel-cased wells and do not differentiate sites based on well status, this study nevertheless demonstrates the utility of aeromagnetic surveys in well finding efforts across the country and shows limitations in database records of oil and natural gas wells.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Biogeochemistry of the Antrim Shale Natural Gas Reservoir

The Antrim Shale, located in the Michigan Basin, United States (U.S.), is a major U.S. shale play having produced over 2.5 Trillion Cubic Feet (Tcf) of unconventional shale natural gas as of 2010. The shallow nature of this formation sets it apart from other, more characterized unconventional shale gas plays. The depth of gas production of the Antrim ranges from approximately 150 to 600 m and it is typically vertically drilled, contrary to deeper, horizontally drilled shales. A thorough understanding of the biogeochemistry and microbiology of this complex system will be advantageous for improving well performance, produced water management, and potential biocidal treatment as microbial community composition can vary substantially even among closely spaced wells. In this study, we analyzed produced water collected from nine different wells in the Antrim Shale by investigating the geochemical and microbial community composition of the produced water to gain greater insight into the overall biogeochemistry of this unique shale system. The majority of the wells from this study had high total dissolved solids (TDS) primarily composed of chloride and sodium, averaging 86,804 mg/L with a maximum 116,223 mg/L; however, three of the wells sampled along the northern margin of the basin exhibited significantly lower TDS ranging from 4932 to 6496 mg/L. Overall, our microbial community analysis revealed relatively low abundance within our samples and high variability of the microbial community among the sampled wells. The majority of bacterial sequences were identified within Proteobacteria, Firmicutes, and Actinobacteria phyla and metagenomic sequencing revealed the low presence of Methanobacteriaceae within each sample. We also investigated potential microbial community drivers and found that TDS, sodium, chloride, iodide, bromide, ammonium, potassium, and strontium were significantly correlated with the observed microbial community. The varying geochemical conditions between wells demonstrate different subsurface environmental niches, potentially driving the heterogeneous microbial communities we observed from well to well. This analysis suggests an important relationship between both well location and geochemistry and the observed microbial community that can persist in the reservoir. Continued studies of the Antrim Shale will improve our understanding of the complex interdependencies of this ecosystem.

03 NATURAL GAS↗
DOE OSTI2020

Physical Properties and Gas Hydrate at a Near-Seafloor Thrust Fault, Hikurangi Margin, New Zealand

The Papaku Fault Zone, drilled at International Ocean Discovery Program (IODP) Site U1518, is an active splay fault in the frontal accretionary wedge of the Hikurangi Margin. In logging-while-drilling data, the 33-m-thick fault zone exhibits mixed modes of deformation associated with a trend of downward decreasing density, P-wave velocity, and resistivity. Methane hydrate is observed from ~30 to 585 m below seafloor (mbsf), including within and surrounding the fault zone. Hydrate accumulations are vertically discontinuous and occur throughout the entire logged section at low to moderate saturation in silty and sandy centimeter-thick layers. In this paper, we argue that the hydrate distribution implies that the methane is not sourced from fluid flow along the fault but instead by local diffusion. This, combined with geophysical observations and geochemical measurements from Site U1518, suggests that the fault is not a focused migration pathway for deeply sourced fluids and that the near-seafloor Papaku Fault Zone has little to no active fluid flow.

58 GEOSCIENCES↗
DOE OSTI2023

Salt Diapir‐Driven Recycling of Gas Hydrate

Abstract By harnessing both hypothetical, synthetic basin and gas hydrate (GH) system models and real‐world models of well‐studied salt diapir‐associated GH sites at Green Canyon (Gulf of Mexico) and Blake Ridge (U.S. Atlantic coast), we propose and demonstrate salt movement (and in particular, diapirism) to be a new mechanism for the recycling of marine GH. At Green Canyon, for example, we show that by considering this newly proposed diapir‐driven recycling mechanism in conjunction with previously proposed lithological control on sandy‐reservoir‐hosted hydrate at the base of the GH stability zone (BGHSZ; ∼bottom‐simulating reflector, BSR), modeled GH saturations match drilling data. Overall, salt diapir movement‐induced GH recycling provides a temperature‐driven mechanism by which GH saturations at the BGHSZ may reach >90 vol. % and by which GH volumes near and free gas volumes beneath the BGHSZ may be increased significantly through time. Interestingly, comparison of salt diapir‐driven recycling and sediment burial‐driven recycling scenarios suggests notably higher rates of recycling via diapir‐driven versus burial‐driven processes. Our results suggest that GH and associated free gas accumulations above salt diapir crests represent particularly attractive targets for unconventional and conventional hydrocarbon resource exploration and for scientific and academic drilling expeditions aimed at exploiting GH systems. Salt basins containing GH systems—including passive margin basins of the Gulf of Mexico, southeastern Brazil, and southwestern Africa—are therefore compelling localities for studying salt‐driven GH recycling and for salt diapir‐associated natural gas exploration.

58 GEOSCIENCES↗
DOE OSTI2020

Surface structure of linear nanopores in amorphous silica: Comparison of properties for different pore generation algorithms

In this work, we compare the surface structure of linear nanopores in amorphous silica (a-SiO 2 ) for different versions of “pore drilling” algorithms (where the pores are generated by the removal of atoms from the preformed bulk a-SiO 2 ) and for “cylindrical resist” algorithms (where a-SiO 2 is formed around a cylindrical exclusion region). After adding H to non-bridging O, the former often results in a moderate to high density of surface silanol groups, whereas the latter produces a low density. The silanol surface density for pore drilling can be lowered by a final dehydroxylation step, and that for the cylindrical resist approach can be increased by a final hydroxylation step. In this respect, the two classes of algorithms are complementary. We focus on the characterization of the chemical structure of the pore surface, decomposing the total silanol density into components corresponding to isolated and vicinal mono silanols and geminal silanols. The final dehyroxylation and hydroxylation steps can also be tuned to better align some of these populations with the target experimental values.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Source apportionment of airborne volatile organic compounds near unconventional oil and gas development

Oil and natural gas (ONG) extraction emits volatile organic compounds (VOCs). Certain VOCs are identified as hazardous air pollutants (HAPS) while others contribute to ozone formation. This study examines the impact of ONG operations on VOC levels during the development of multi-well ONG pads in suburban Broomfield, Colorado. From October 2018 to December 2020, weekly VOC measurements were taken at 18 sites across the area. These included spots near well pads, in adjacent neighborhoods, and at a background site, covering various stages of well pad development including drilling, hydraulic fracturing, flowback, and production. Analysis using Positive Matrix Factorization (PMF) identified six factors, including combustion, background/biogenic sources, light and complex alkanes, drilling activities, and ONG acetylene. Factors linked to local ONG activities exhibited clear temporal and spatial correlations with Broomfield well development. Benzene source analysis revealed distinct contribution gradients, with ONG-related sources notably influencing areas near the well pads, particularly in pre-production. ONG-related weekly benzene contributions varied from 9% to 63% at a community background site and 18% to 89% in a neighborhood close to a well pad.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Comparison of Rotary and Linear Cutting Methodology in Determining Specific Cutting Energy of Granite

Abstract Single polycrystalline diamond compact (PDC) cutting is a practical technique to understand the rock–tool interactions in drag-bit-type geothermal drilling operations. This paper introduces a rotary cutting method to determine specific cutting energy (SCE) and compares it with the conventional linear cutting method. In this work, granite is selected to represent hard rock formations in geothermal drilling. Cutting tests are conducted on a Computer Numerical Control (CNC) machine with a realistic cutting speed of 12.7 m/min and several chip loads ranging from 0.08 to 0.25 mm. The cutting force is measured using a dynamometer and then converted to specific cutting energy (SCE). The results show that the rotary method produces an inverse relationship between SCE and chip load, whereas the linear method shows the opposite. As a result, the produced SCE by the rotary method tends to be lower than that of the linear method at a higher chip load at and over 0.16 mm. The difference may be attributed to the cutting configuration and associated force components.

Engineering↗
DOE OSTI2019

Enhancing trap and fault seal analyses by integrating observations from HR3D seismic data with well logs and conventional 3D seismic data, Texas inner shelf

An understanding of trap and fault seal quality is critical for assessing hydrocarbon prospectivity. To achieve this, modern analytical techniques leverage well data and conventional industry-standard 3D seismic data to evaluate the trap, and any faults displacing the reservoir and top seal intervals. Above all, geological interpretation provides the framework of trap and fault seal analyses, but can be hindered by the data resolution, quality and acquisition style of the conventional seismic data. Furthermore, limiting the analysis to only the petroleum system at depth may lead to erroneous perceptions because interpreting overburden features, such as shallow faults or gas chimneys, can provide valuable observations with respect to container performance, and can to help validate trap and fault seal predictions. Here, a supplement to conventional 3D data are high-resolution 3D seismic (HR3D) data, which provide detailed images of the overburden geology. This study utilizes an HR3D seismic volume in the San Luis Pass area of the Texas inner shelf, where shallow fault tips and a sizeable gas chimney are interpreted over an unsuccessful hydrocarbon prospect. Static post-drill fault seal and trap analyses suggest that the primary fault displacing the structural closure could have withheld columns of gas c. 100 m high, but disagree with our HR3D seismic interpretations and dry-well analyses. From our results, we hypothesize that tertiary gas migration through fault conduits reduced the hydrocarbon column in the prospective Early Miocene reservoir, and may have resulted from continued movement along the intersecting faults. Overall, this study reinforces the importance of understanding the overburden geology and geohistory of faulted prospects, and demonstrates the utility of pre-drill HR3D acquisition when conducting trap and fault seal analyses.

3D seismic↗
DOE OSTI2020

Gas hydrate quantification in Walker Ridge block 313, Gulf of Mexico, from full-waveform inversion of ocean-bottom seismic data

The Gulf of Mexico (GOM) Joint Industry Project Leg 2 logging-while-drilling data in Walker Ridge lease block 313 (WR313) in the GOM detected gas hydrate in coarse- and fine-grained sediments at sites WR313-G and WR313-H. The coarse-grained units are thin ([Formula: see text]) and highly saturated, whereas the fine-grained unit is thick (approximately 200 m) with low saturation and fracture-filling gas hydrate. Unlike its coarse-grained counterpart, the seismic character of the fine-grained unit does not clearly indicate the presence of gas hydrate, which would likely have remained undiscovered in the absence of drilling. In this paper, through frequency-domain acoustic full-waveform inversion (FWI) of ocean-bottom seismometer data along a 2D multichannel seismic transect near sites WR313-G and WR313-H, we detect and quantify gas hydrate in the fine-grained unit. Key results are as follows: First, the base of the gas hydrate stability zone, which is not obvious in the reflection profile, can be discerned in the FWI results. Second, the gas hydrate in the fine-grained unit is mainly confined to the area between two sets of opposite-dipping normal faults implying that the fault architecture may be partially responsible for this gas hydrate accumulation and distribution.

Geochemistry & Geophysics↗
DOE OSTI2019

EGS Collab Testbed 1 Earth Model Input Files

The EGS Collab is conducting experiments in hydraulic fracturing at a depth of 1.5 km in the Sanford Underground Research Facility (SURF) on the 4850 Level. A total of eight ~60m-long subhorizontal boreholes were drilled at that depth on the western rib of the West Access Drift. Six of these holes are used for geophysical monitoring, one is used for hydraulic fracturing and the remaining hole was designed as a production borehole. In addition to these eight boreholes, 4 5-m Jack leg boreholes were drilled for housing geophones. This submission package includes various data type that were assembled to create Earth Models of the testbed. Note: The coordinate system used is local Homestake Mine Coordinate (HMC) system from an old gold mine that was in operation for over 100 years.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Utah FORGE: Updated Phase 2C Well Location Coordinates

Utah FORGE has been established to develop, test, and improve the technologies and techniques required to develop EGS-type geothermal resources. Drilling of the first of two deep deviated wells, 16A(78)-32, will begin in the second half of 2020. This well will serve as the injection well for the injection-production well pair that will form the heart of the laboratory. This submission contains an archive of well location data within the Roosevelt Hot Springs geothermal area. An Excel spreadsheet is included containing updated GPS data for Utah FORGE wells drilled during Phase 2C (56-32, 68-32, 78-32). This data was collected over time by the Utah Geological Survey and contains all coordinates collected and the final averaged XY coordinates in both Longitude and Latitude and UTM Zone 12, NAD83. Elevation is also included. GIS shapefiles with well points are provided in the archive.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Utah FORGE: Well 16B(78)-32 Logs from Schlumberger Technologies

This dataset is a collection of well logs provided by Schlumberger Technologies from the Utah FORGE well 16B(78)-32 drilling project. Information here includes critical borehole information collected by an ultrasonic borehole imager (UBI) and a fullbore formation microimager (FMI). Well 16B(78)-32 serves as the production well for reservoir creation, fluid circulation, and demonstration of heat extraction for the FORGE project. It has been drilled as a doublet approximately 300 feet parallel to and above the injection well 16A(78)-32. The total depth measured 10,947 feet and the vertical depth measured 8,357 feet.

11.5 inch intermediate casing logs↗