Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deep Space Network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Link monitor and control operator assistant: A prototype demonstrating semiautomated monitor and control

This article describes the approach, results, and lessons learned from an applied research project demonstrating how artificial intelligence (AI) technology can be used to improve Deep Space Network operations. Configuring antenna and associated equipment necessary to support a communications link is a time-consuming process. The time spent configuring the equipment is essentially overhead and results in reduced time for actual mission support operations. The NASA Office of Space Communications (Code O) and the NASA Office of Advanced Concepts and Technology (Code C) jointly funded an applied research project to investigate technologies which can be used to reduce configuration time. This resulted in the development and application of AI-based automated operations technology in a prototype system, the Link Monitor and Control Operator Assistant (LMC OA). The LMC OA was tested over the course of three months in a parallel experimental mode on very long baseline interferometry (VLBI) operations at the Goldstone Deep Space Communications Center. The tests demonstrated a 44 percent reduction in pre-calibration time for a VLBI pass on the 70-m antenna. Currently, this technology is being developed further under Research and Technology Operating Plan (RTOP)-72 to demonstrate the applicability of the technology to operations in the entire Deep Space Network.

Lee, L. F.↗
NASA NTRS1975

A distributed data base management system

Major system design features of a distributed data management system for the NASA Deep Space Network (DSN) designed for continuous two-way deep space communications are described. The reasons for which the distributed data base utilizing third-generation minicomputers is selected as the optimum approach for the DSN are threefold: (1) with a distributed master data base, valid data is available in real-time to support DSN management activities at each location; (2) data base integrity is the responsibility of local management; and (3) the data acquisition/distribution and processing power of a third-generation computer enables the computer to function successfully as a data handler or as an on-line process controller. The concept of the distributed data base is discussed along with the software, data base integrity, and hardware used. The data analysis/update constraint is examined.

Bryan, A. I.↗
NASA NTRS1985

Network Information Management Subsystem

The Deep Space Network is implementing a distributed data base management system in which the data are shared among several applications and the host machines are not totally dedicated to a particular application. Since the data and resources are to be shared, the equipment must be operated carefully so that the resources are shared equitably. The current status of the project is discussed and policies, roles, and guidelines are recommended for the organizations involved in the project.

Chatburn, C. C.↗
NASA NTRS1991

Operations automation using temporal dependency networks

Precalibration activities for the Deep Space Network are time- and work force-intensive. Significant gains in availability and efficiency could be realized by intelligently incorporating automation techniques. An approach is presented to automation based on the use of Temporal Dependency Networks (TDNs). A TDN represents an activity by breaking it down into its component pieces and formalizing the precedence and other constraints associated with lower level activities. The representations are described which are used to implement a TDN and the underlying system architecture needed to support its use. The commercial applications of this technique are numerous. It has potential for application in any system which requires real-time, system-level control, and accurate monitoring of health, status, and configuration in an asynchronous environment.

Cooper, Lynne P.↗
NASA NTRS1993

Operations automation using the Link Monitor and Control Operator Assistant

The Link Monitor and Control Operator Assistant (LMC OA) is a knowledge-based prototype system which uses AI techniques to provide semiautomated monitor and control functions to support operations of the Deep Space Network (DSN) 70-m antenna at the Goldstone Deep Space Communications Complex (DSCC). The manual and time-consuming process of configuring the 70-m antenna and its associated communications and processing equipment, known as precalibration, is an overhead activity; the time spent in precalibration is time which cannot be spent supporting actual mission operations. Therefore, the major goal of the LMC OA task is to demonstrate techniques that reduce precalibration time, decrease operations overhead, and increase the availability of this valuable and oversubscribed NASA resource. The LMC OA prototype was tested in a parallel, experimental mode at the Goldstone DSCC performing semiautomated precalibration using the actual operational equipment. This test demonstrated that a reduction of 40 percent in precalibration time can be achieved with the LMC OA prototype.

Lee, Lorrine F.↗
NASA NTRS2012

Conceptual Design of a Communication-Based Deep Space Navigation Network

As the need grows for increased autonomy and position knowledge accuracy to support missions beyond Earth orbit, engineers must push and develop more advanced navigation sensors and systems that operate independent of Earth-based analysis and processing. Several spacecraft are approaching this problem using inter-spacecraft radiometric tracking and onboard autonomous optical navigation methods. This paper proposes an alternative implementation to aid in spacecraft position fixing. The proposed method Network-Based Navigation technique takes advantage of the communication data being sent between spacecraft and between spacecraft and ground control to embed navigation information. The navigation system uses these packets to provide navigation estimates to an onboard navigation filter to augment traditional ground-based radiometric tracking techniques. As opposed to using digital signal measurements to capture inherent information of the transmitted signal itself, this method relies on the embedded navigation packet headers to calculate a navigation estimate. This method is heavily dependent on clock accuracy and the initial results show the promising performance of a notional system.

Anzalone, Evan J.↗
NASA NTRS1993

Operations Automation Using the Link Monitor and Control Operator Assistant

The Link Monitor & Control Operator Assistant (LMC OA) is a knowledge-based prototype system which uses Artificial Intelligence (AI) techniques to provide semi-automated monitor and control functions to support operations of the Deep Space Network (DSN) 70-Meter antenna at the Goldstone Deep Space Communications Camplex (DSCC).

Goldstone↗
NASA NTRS2018

Dynamic Shared Computing Resources for Multi-Robot Mars Exploration

The NASA roadmap for 2020 and beyond includes several key technologies which will have a game-changing impact on planetary exploration. The first of these is High Performance Spaceflight Computing (HPSC), which will provide orders of magnitude increases in processing power for next-generation rovers and orbiters (Doyle et al. 2013). The second is Delay Tolerant Networking, which overlays the Deep Space Network, providing internet-like abstractions and store-forward to route data through intermittent delays in connectivity. The third is a trend toward small, co-dependent robots included in flagship missions (MarCO, PUFFER, and Mars Heli). Taken together, these imply an increasing amount of communication and computing heterogeneity on Mars in coming decades. Motivated by these technological trends, we study the concept of Mars on-site shared analysis, information, and communication (MOSAIC) for Mars exploration. The key algorithmic problem associated with MOSAIC networks is simultaneous scheduling of computation, communication, and caching of data, which we illustrate using the three scenarios. We present models, preliminary solutions, and simulation results for two scenarios, showing how mission efficiency relates to communication bandwidth, processing power, geography of the environment, and optimal scheduling of computation, communication, and data caching. The third scenario illustrates future directions of this work.

Chien, Steve↗
NASA NTRS2021

DSN Radio Astronomy Spectrometer

The Deep Space Network (DSN) enables NASA to communicate with its deep space spacecraft. By virtue of its large antennas, the DSN can be used as a powerful instrument for radio astronomy. In particular, Deep Space Station (DSS) 43, the 70 m antenna at the Canberra Deep Space Communications Complex (CDSCC) has a K-band radio astronomy system covering a 10 GHz bandwidth at 17 to 27 GHz. This spectral range covers a number of atomic and molecular lines, produced in a rich variety of interstellar gas conditions. A new high-resolution spectrometer was deployed at CDSCC in November 2019 and connected to the K-band downconverter. The system has two different firmware modes: 1) Using a 65k-pt FFT to provide 32,768 spectral channels at ~30.5 kHz (0.45 km/s velocity resolution) and 2) Using a 16k-pt polyphase filterbank (PFB) to provide 8,192 spectral channels with ~122 kHz resolution (1.8 km/s velocity resolution). Previous work extensively described the spectrometer system. In this paper we present added functionality and updates to the commissioned spectrometer. The changes include developments in system timing, metadata, firmware and data products.

Bradford, Brian↗
NASA NTRS1966

MSFN transmitters

Implementation and testing of Deep Space Network Manned Space Flight Network transmitters

DEEP SPACE INSTRUMENTATION FACILITY /DSIF/↗
NASA NTRS2012

NASA Integrated Network Monitor and Control Software Architecture

The National Aeronautics and Space Administration (NASA) Space Communications and Navigation office (SCaN) has commissioned a series of trade studies to define a new architecture intended to integrate the three existing networks that it operates, the Deep Space Network (DSN), Space Network (SN), and Near Earth Network (NEN), into one integrated network that offers users a set of common, standardized, services and interfaces. The integrated monitor and control architecture utilizes common software and common operator interfaces that can be deployed at all three network elements. This software uses state-of-the-art concepts such as a pool of re-programmable equipment that acts like a configurable software radio, distributed hierarchical control, and centralized management of the whole SCaN integrated network. For this trade space study a model-based approach using SysML was adopted to describe and analyze several possible options for the integrated network monitor and control architecture. This model was used to refine the design and to drive the costing of the four different software options. This trade study modeled the three existing self standing network elements at point of departure, and then described how to integrate them using variations of new and existing monitor and control system components for the different proposed deployments under consideration. This paper will describe the trade space explored, the selected system architecture, the modeling and trade study methods, and some observations on useful approaches to implementing such model based trade space representation and analysis.

Next Generation Uplink↗
NASA NTRS1991

Radio science ground data system for the Voyager-Neptune encounter, part 1

The Voyager radio science experiments at Neptune required the creation of a ground data system array that includes a Deep Space Network complex, the Parkes Radio Observatory, and the Usuda deep space tracking station. The performance requirements were based on experience with the previous Voyager encounters, as well as the scientific goals at Neptune. The requirements were stricter than those of the Uranus encounter because of the need to avoid the phase-stability problems experienced during that encounter and because the spacecraft flyby was faster and closer to the planet than previous encounters. The primary requirement on the instrument was to recover the phase and amplitude of the S- and X-band (2.3 and 8.4 GHz) signals under the dynamic conditions encountered during the occultations. The primary receiver type for the measurements was open loop with high phase-noise and frequency stability performance. The receiver filter bandwidth was predetermined based on the spacecraft's trajectory and frequency uncertainties.

Kursinski, E. R.↗
NASA NTRS2005

Multi-Agent Modeling and Simulation Approach for Design and Analysis of MER Mission Operations

A space mission operations system is a complex network of human organizations, information and deep-space network systems and spacecraft hardware. As in other organizations, one of the problems in mission operations is managing the relationship of the mission information systems related to how people actually work (practices). Brahms, a multi-agent modeling and simulation tool, was used to model and simulate NASA's Mars Exploration Rover (MER) mission work practice. The objective was to investigate the value of work practice modeling for mission operations design. From spring 2002 until winter 2003, a Brahms modeler participated in mission systems design sessions and operations testing for the MER mission held at Jet Propulsion Laboratory (JPL). He observed how designers interacted with the Brahms tool. This paper discussed mission system designers' reactions to the simulation output during model validation and the presentation of generated work procedures. This project spurred JPL's interest in the Brahms model, but it was never included as part of the formal mission design process. We discuss why this occurred. Subsequently, we used the MER model to develop a future mission operations concept. Team members were reluctant to use the MER model, even though it appeared to be highly relevant to their effort. We describe some of the tool issues we encountered.

Seah, Chin↗
NASA NTRS1973

Low-noise microwave receiving systems in a worldwide network of large antennas.

The Deep-Space Network (DSN) consists of a worldwide network of 26- and 64-m antennas spaced approximately 120 deg around the world. The DSN is a precision communications system designed to communicate with and control unmanned spacecraft traveling at interplanetary ranges. Recent developments in the performance and evaluation of the antennas and maser receivers are discussed, and developments which have contributed to radio-science projects, such as planetary radar astronomy, very-long-baseline interferometry, pulsar, and other astronomical observations are described. It is also shown how these radio-science measurements have been used to evaluate the performance of the antenna-receiver systems.

Reid, M. S.↗