Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DUCTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Circular-to-rectangular transition ducts for high-aspect ratio nonaxisymmetric nozzles

The next generation fighter aircraft will be equipped with nonaxisymmetric multifunction jet engine exhaust systems. The circular-to-rectangular transition duct employed in these systems has been made longer with the objective to maintain uniform flow. The weight of the exhaust system increases with increasing nozzle aspect ratio. The new design is to provide enhanced maneuvering and STOL performance. It is attempted to reduce the increase in weight as much as possible by new design strategies. The present paper has the objective to show through experimental data that the current design guidelines for transition ducts can be expanded so that shorter transitions are possible thereby reducing the nonaxisymmetric exhaust system weight penalty.

Burley, J. R., II↗

Installation effects of long-duct pylon-mounted nacelles on a twin-jet transport model with swept supercritical wing

The installation interference effects of an underwing-mounted, long duct, turbofan nacelle were evaluated in the Langley 16-Foot Transonic Tunnel with two different pylon shapes installed on a twin engine transport model having a supercritical wing swept 30 deg. Wing, pylon, and nacelle pressures and overall model force data were obtained at Mach numbers from 0.70 to 0.83 and nominal angles of attack from -2 deg to 4 deg at an average unit Reynolds number of 11.9 x 1,000,000 per meter. The results show that adding the long duct nacelles to the supercritical wing, in the near sonic flow field, changed the magnitude and direction of flow velocities over the entire span, significantly reduced cruise lift, and caused large interference drag on the nacelle afterbody.

Lee, E. E., Jr.↗

Three-dimensional computation of mixing of transverse injector in a ducted supersonic airstream

Numerical solutions of the three-dimensional mass-averaged elliptic Navier-Stokes equations, including species transport, are obtained for nonreacting, turbulent, mixing flow fields for the case of transverse sonic injection of a secondary gas into a supersonic airstream through a circular orifice injector. Results are presented for flow through a constant area duct and through a duct with a rearward-facing step upstream of the injector. The equations are numerically integrated using MacCormack's explicit method and turbulence is included using the Baldwin-Lomax algebraic eddy viscosity model. In the species transport and energy equations, diffusion coefficients based on Fick's law and an assumption of unit Lewis number are applied. The computations were performed on a CDC-VPS-32 (extended version of Cyber-205) using a grid consisting of approximately 200,000 points. The computed results are compared with experimentally observed penetration and spreading boundaries for an injected gas at two dynamic pressure ratios. Three-dimensional flow field structures are dipicted in terms of static pressure, mass fractions of species and velocity vectors.

Uenishi, K.↗

Assessment of a parabolic analysis for axisymmetric internal flows in rocket and turbomachinery ducts

The flow paths in gas turbine passages encompass a wide range of flow properties such as Reynolds number and Mach number as well as many other variable flow conditions such as swirl, free-stream turbulence, and laminar/turbulent transition. An existing computer program, the Axisymmetric Diffuser Duct (ADD) code, which calculates compressible, turbulent, swirling flow through axisymmetric ducts has been modified to include the effects of free-stream turbulence and laminar/turbulent transition. The program has been evaluated on a matrix of test cases to determine its accuracy, robustness, and limits of applicability. This improved version of the ADD code calculates solutions which compare well with available data and can now be applied to a wider range of problems than previously possible. In addition a concept called local enhancement was developed and tested on a simple two-dimensional geometry in order to demonstrate a method to reduce computer time. In this concept the pressure distribution is calculated on a coarse grid using the ADD code and the viscous layer is locally enhanced using a boundary layer analysis. By applying this concept, an order of magnitude reduction in computer time was possible without any loss in accuracy.

Power, G. D.↗

Flow visualization of secondary flows in three curve ducts

Streak photography flow measurements are made for secondary flows in three 90-deg curved ducts of square cross section and different radii of curvature, at Dean numbers of 15,000-36,000 and radius ratios of 0.5, 2.3, and 3.0. Attention is given to secondary flow patterns for three cross sections in each bend: the inlet zero-deg plane, the midpoint 45-deg plane, and the outlet 90-deg plane. After a rapid transition region, the pressure-driven secondary flow patterns were characterized by flow moving toward the outer curved wall at the axial midplane and returning to the inner wall along the duct walls. The 0.5-radius ratio elbow was found to have the greatest influence on upstream inlet conditions.

Sanz, G. M.↗

Duct flows with swirl

The physics of the flow interaction between swirl and secondary flow was studied in duct bends relevant to the design of advanced aircraft nozzle systems. Both laminar and turbulent subsonic flows were investigated in generic duct bends for different amounts of swirl. The flow calculations are based on an economical three-dimensional spatial marching method employed in an existing computer code (PEPSIG). The computational method and code were extended to allow azimuthal periodicity and solutions in which the polar coordinate singularity occurs in the interior of the flow field. These extensions are needed to address swirling flow and twisted centerlines arising in out-of-plane bends. It was found that appropriate amounts of swirl can reduce total pressure loss relative to nonswirling cases. This conclusion was found to be insensitive to computational mesh.

Tsai, Tommy M.↗

Compressible flow in a diffusing S-duct with flow separation

Local flow velocity vectors, as well as static and total pressures along ten radial traverses, were obtained at six stations for secondary flows in a diffusing 30-30-deg S-duct with circular cross section. The strong secondary flow measured in the first bend continued into the second with new vorticity produced in the opposite direction. Contour plots representing the transverse velocity field, as well as total and static pressure contours, have been obtained. As a result of the secondary flow and subsequent separation, substantial total pressure distortion is noted to occur at the duct exit.

Vakili, A. D.↗

Unsteady heat transfer in turbine blade ducts: Focus on combustor sources

Thermal waves generated by either turbine rotor blades cutting through nonuniform combustor temperature fields or unsteady burning could lead to thermal fatigue cracking in the blades. To determine the magnitude of the thermal oscillation in blades with complex shapes and material compositions, a finite element Galerkin formulation has been developed to study combustor generated thermal wave propagation in a model two-dimensional duct with a uniform plug flow profile. The reflection and transmission of the thermal waves at the entrance and exit boundaries are determined by coupling the finite element solutions at the entrance and exit to the eigenfunctions of an infinitely long adiabatic duct. Example solutions are presented. In general, thermal wave propagation from an air passage into a metallic blade wall is small and not a problem. However, if a thermal barrier coating is applied to a metallic surface under conditions of a high heat transfer, a good impedance match is obtained and a significant portion of the thermal wave can pass into the blade material.

Baumeister, Kenneth J.↗

A model of the wall boundary layer for ducted propellers

The objective of the present study is to include a representation of a wall boundary layer in an existing finite element model of the propeller in the wind tunnel environment. The major consideration is that the new formulation should introduce only modest alterations in the numerical model and should still be capable of producing economical predictions of the radiated acoustic field. This is accomplished by using a stepped approximation in which the velocity profile is piecewise constant in layers. In the limit of infinitesimally thin layers, the velocity profile of the stepped approximation coincides with that of the continuous profile. The approach described here could also be useful in modeling the boundary layer in other duct applications, particularly in the computation of the radiated acoustic field for sources contained in a duct.

Eversman, Walter↗

Thermodynamics and wave processes in high Mach number propulsive ducts

Analysis of the flow in a propulsive duct indicates that, at high Mach numbers, the thermodynamic energy of the fluid is delivered directly into compression and expansion waves. The importance of the resulting wave phenomena is explored by considering the net thrust delivered by a two dimensional convergent-divergent duct with a simplified, planar heat addition zone. It is found that net thrust is reduced when operating at other than the design Mach number, an effect which is most severe for Mach numbers exceeding the design value. An idealized model is developed, involving a self-induced heat injection cycle, and it is seen that the waves produced by this cycle can be the dominant agency in producing thrust.

Stalker, R. J.↗

The prediction of secondary flow in curved ducts of square cross-section

A three-dimensional, fully-viscous Navier-Stokes code designated INS3D is presently used for the prediction of secondary and axial flows in curved ducts of square cross-section. Attention is given to a 90-deg bend, an S-shaped duct with two 22.5-deg bends, and an 180-deg bend. The sensitivity of predicted axial and secondary flows to grid resolution and artificial dissipation is investigated in the 90-deg bend case. Good agreement is found between predicted and experimentally measured flow components.

Mcconnaughey, P. K.↗

Unsteady heat transfer in turbine blade ducts - Focus on combustor sources

Thermal waves generated by either turbine rotor blades cutting through nonuniform combustor temperature fields or unsteady burning could lead to thermal fatigue cracking in the blades. To determine the magnitude of the thermal oscillation in blades with complex shapes and material compositions, a finite element Galerkin formulation has been developed to study combustor generated thermal wave propagation in a model two-dimensional duct with a uniform plug flow profile. The reflection and transmission of the thermal waves at the entrance and exit boundaries are determined by coupling the finite element solutions at the entrance and exit to the eigenfunctions of an infinitely long adiabatic duct. Example solutions are presented. In general, thermal wave propagation from an air passage into a metallic blade wall is small and not a problem. However, if a thermal barrier coating is applied to a metallic surface under conditions of a high heat transfer, a good impedance match is obtained and a significant portion of the thermal wave can pass into the blade material.

Baumeister, K. J.↗

Borescope Device Takes Impressions In Ducts

Maneuverable device built around borescope equipped to make impression molds of welded joints in interior surfaces of ducts. Molds then examined to determine degress of mismatch in welds. Inserted in duct, and color-coded handles on ends of cables used to articulate head to maneuver around corners. Use of device fairly easy and requires little training.

Walter, Richard F.↗

Active control of multi-dimensional random sound in ducts

Previous work has demonstrated how active control may be applied to the control of random noise in ducts. These implementations, however, have been restricted to frequencies where only plane waves are propagating in the duct. In spite of this, the need for this technology at low frequencies has progressed to the point where commercial products that apply these concepts are currently available. Extending the frequency range of this technology requires the extension of current single channel controllers to multi-variate control systems as well as addressing the problems inherent in controlling higher order modes. The application of active control in the multi-dimensional propagation of random noise in waveguides is examined. An adaptive system is implemented using measured system frequency response functions. Experimental results are presented illustrating attained suppressions of 15 to 30 dB for random noise propagating in multiple modes.

Silcox, R. J.↗

Comparison of experiment with calculations using curvature-corrected zero and two equation turbulence models for a two-dimensional U-duct

In this paper experimental measurements are compared with Navier-Stokes calculations using seven different turbulence models for the internal flow in a two-dimensional U-duct. The configuration is representative of many internal flows of engineering interst that experience strong curvature. In an effort to improve agreement, this paper tests several versions of the two-equation k-epsilon turbulence model including the standard version, an extended version with a production range time scale, and a version that includes curvature time scales. Each is tested in its high and low Reynolds number formulations. Calculations using these new models and the original mixing length model are compared here with measurements of mean and turbulence velocities, static pressure and skin friction in the U-duct at two Reynolds numbers. The comparisons show that only the low Reynolds number version of the extended k-epsilon model does a reasonable job of predicting the important features of this flow at both Reynolds numbers tested.

Monson, D. J.↗

Effect of surface deposits on electromagnetic waves propagating in uniform ducts

A finite-element Galerkin formulation was used to study the effect of material surface deposits on the reflective characteristics of straight uniform ducts with PEC (perfectly electric conducting) walls. Over a wide frequency range, the effect of both single and multiple surface deposits on the duct reflection coefficient were examined. The power reflection coefficient was found to be significantly increased by the addition of deposits on the wall.

Baumeister, Kenneth J.↗

Experimental investigation of turbulent flow through a circular-to-rectangular transition duct

Steady, incompressible, turbulent, swirl-free flow through a circular-to-rectangular transition duck was studied experimentally. The cross-sectional area remains the same at the exit as at the inlet, but varies through the transition section to a maximum value approximately 15 percent above the inlet value. The cross-sectional geometry everywhere along the duct is defined by the equation of a superellipse. Mean and turbulence data were accumulated utilizing pressure and hot-wire instrumentation at five stations along the test section. Data are presented for operating bulk Reynolds numbers of 88,000 and 390,000. Measured quantities include total and static pressure, the three components of the mean velocity vector, and the six components of the Reynolds stress tensor. In addition to the transition duct measurements, a hot-wire technique which relies on the sequential use of single rotatable normal and slant-wire probes was proposed. The technique is applicable for measurement of the total mean velocity vector and the complete Reynolds stress tensor when the primary flow is arbitrarily skewed relative to a plane which lies normal to the probe axis of rotation.

Davis, David O.↗

Pressure drop in fully developed, duct flow of dispersed liquid-vapor mixture at zero gravity

The dynamics of steady, fully developed dispersed liquid-vapor flow in a straight duct at 0-g is simulated by flowing water containing n-butyl benzoate droplets. Water and benzoate are immiscible and have identical density at room temperature. The theoretical basis of the simulation is given. Experiments showed that, for a fixed combined flow rate of water and benzoate, the frictional pressure drop is unaffected by large changes in the volume fraction of benzoate drops and their size distribution. Measured power spectra of the static wall pressure fluctuations induced by the turbulent water-benzoate flow also revealed that their dynamics is essentially unaltered by the presence of the droplets. These experimental findings, together with the theoretical analysis, led to the conclusion that the pressure drop in fully developed, dispersed liquid-vapor flow in straight ducts of constant cross section at 0-g is identical to that due to liquid flowing alone at the same total volumetric flow rate of the liquid-vapor mixture and, therefore, can be readily determined.

Sridhar, K. R.↗