Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Effects of the annealing process on the structure and valence state of vanadium oxide thin films

Highlights: • TGA-DSC was used to determine the annealing temperature generally. • Pure VO{sub 2} (M) film was obtained with some annealing process. • The film surface transits from layer to grains as the annealing temperature increases. • Spans of O1s and V2p{sub 3/2} core level of V{sup 5+}, V{sup 4+}, V{sup 3+} were 12.75, 14.0 and 14.7 eV. • The Tc of pure VO{sub 2} (M) was 64.3 °C, its hysteresis loop width was 12.1 °C. - Abstract: V{sub 2}O{sub 5} was used to prepare vanadium oxide films via the sol-gel method. The “n” in V{sub 2}O{sub 5}∙nH{sub 2}O was determined to be approximately 1.67. After annealing at 390 °C for 4 h, a pure VO{sub 2} (M) phase was obtained and denoted sample Ⅴ. The crystallite sizes of VO{sub 2} (M) in samples Ⅱ, Ⅲ, Ⅳ and Ⅴ were 42, 41, 35 and 24 nm, respectively. The surface morphology of sample Ⅰ was flat; however, many small, dense particles covered the surface of sample Ⅴ. Sample Ⅱ had a layered structure, and samples Ⅲ and Ⅳ consisted of compact grains. The binding energy (BE) differences between the O1s and the V{sup 5+}2p{sub 3/2}, V{sup 4+}2p{sub 3/2}, and V{sup 3+}2p{sub 3/2} core levels were 12.75, 14.0 and 14.7 eV, respectively. For the sample Ⅴ film, the maximum transmittance change at 2500 nm was 39%, the phase transition temperature (Tc) was 64.3 °C, and the hysteresis loop width was 12.1 °C.

36 MATERIALS SCIENCE↗

The effects of filamentary Ni, graphene and lithium amide (LiNH2) additives on the dehydrogenation behavior of mechano-chemically synthesized crystalline manganese borohydride (Mn(BH4)2) and its solvent filtration/extraction

Highlights: • Effect of graphene, filamentary Ni and LiNH{sub 2} on the synthesis of Mn(BH{sub 4}){sub 2} investigated. • Mechanical dehydrogenation observed for filamentary Ni and LiNH{sub 2} but not for graphene. • All additives suppressed the release of B{sub 2}H{sub 6} during thermal decomposition of Mn(BH{sub 4}){sub 2} with filamentary Ni being the strongest suppressor. • The LiNH{sub 2} additive reduced the apparent activation energy for dehydrogenation to 44.9 ± 4.3 kJ/mol. • After solvent filtration and extraction of the (Mn(BH{sub 4}){sub 2}/LiCl) sample, a dimetallic hydride [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] was found. - Abstract: Dehydrogenation properties of mechano-chemically synthesized crystalline Mn(BH{sub 4}){sub 2} hydride without and with ultrafine filamentary carbonyl nickel (Ni), graphene and LiNH{sub 2} were investigated. It is reported for the first time that all additives suppressed the release of B{sub 2}H{sub 6} with the filamentary Ni additive being the most effective suppressor of B{sub 2}H{sub 6}. In DSC, the decomposition peak of Mn(BH{sub 4}){sub 2} was endothermic. The estimated apparent activation energy for isothermal dehydrogenation was dramatically reduced to 44.9 ± 4.3 kJ/mol for the 5 wt.% LiNH{sub 2} additive from about 76–81 kJ/mol range for the additive-free sample and 5 wt.% filamentary Ni and graphene additives. The most striking finding, that has never been reported in the literature, is that the process of solvent filtration and extraction of the mechano-chemically synthesized (Mn(BH{sub 4}){sub 2}/LiCl) sample, resulted in the crystallization of a dimetallic borohydride solvate [{Li(Et_2O)_2}Mn{sub 2}(BH{sub 4}){sub 5}] instead of crystalline Mn(BH{sub 4}){sub 2}. Its dehydrogenation behavior was investigated isothermally and by TGA/DSC.

36 MATERIALS SCIENCE↗

Expanded graphite for thermal conductivity and reliability enhancement and supercooling decrease of MgCl2⋅6H2O phase change material

Highlights: • MgCl{sub 2}·6H{sub 2}O/EG composite PCMs show the superior thermal transfer ability. • 83.33 wt.% of MgCl{sub 2}·6H{sub 2}O encapsulated in composite PCM was obtained. • EG and nucleating agents decreased the supercooling degree. - Abstract: Expanded graphite (EG) is considered as a promising supporter for phase change material (PCM) due to its unique porous structure and excellent heat transfer ability. In the study, EG with different mass fractions (9 wt.%, 13 wt.%, 16.67 wt.%, and 20 wt.%) was respectively blended with MgCl{sub 2}·6H{sub 2}O. The thermal conductivity data of composite PCMs with 9 wt.%, 13 wt.%, 16.67 wt.%, and 20 wt.% of EG was respectively measured to be 0.942 W/m K, 1.053 W/m K, 1.354 W/m K and 1.658 W/m K. DSC analysis showed that 16.67 wt.% of EG decreased the degree of supercooling by 29.4 °C and that the addition of 3.0 wt.% SrCO{sub 3} further decreased the degree of supercooling by 17.9 °C. The maximum encapsulation weight percentage of MgCl{sub 2}·6H{sub 2}O reached 83.33 wt.% after 30 phase change cycles without significantly reducing its latent heat value, exhibiting the relatively stable thermal reliability.

36 MATERIALS SCIENCE↗

Luminescence, structure and antiferroelectric-type phase transition in Ca8ZnEu(PO4)7

Highlights: • Thermal, dielectric and luminescence properties were obtained for Ca{sub 8}ZnEu(PO{sub 4}){sub 7}. • Ca{sub 8}ZnEu(PO{sub 4}){sub 7} belongs to antiferroelectric with T{sub c} = 836 K. • First-order antiferroelectric/paraelectric phase transitions have been found. • Influence of composition on the luminescence properties has been shown. • Structure of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} was refined by the Rietveld method. - Abstract: Photoluminescence excitation and emission spectra of new phosphate Ca{sub 8}ZnEu(PO{sub 4}){sub 7} have been investigated. The influence of the composition on the luminescence intensity has been shown. The substitution of Zn{sup 2+} for Ca{sup 2+} in Ca{sub 9}Eu(PO{sub 4}){sub 7} with the formation of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} leads to the increased emission intensity {sup 5}D{sub 0} → {sup 7}F{sub 2} by about 1.5 times and to decreased number of bands from three to one in the range of {sup 5}D{sub 0} → {sup 7}F{sub 0} transition. Conditions of preparation do not influence the luminescent properties and distribution of Eu{sup 3+} cations in the structure. DSC, SHG data and dielectric spectroscopy reveal that Ca{sub 8}ZnEu(PO{sub 4}){sub 7} belongs to antiferroelectrics (T{sub c} = 836 K). The first-order antiferroelectric/paraelectric transformations are accompanied by a changing symmetry (R3-barC to R3-barm). The structure of Ca{sub 8}ZnEu(PO{sub 4}){sub 7} (sp. gr. R3-barc) was refined by the Rietveld method. The Zn{sup 2+} cations occupy the M5 site. The Eu{sup 3+} and Ca{sup 2+} ions are located in the M1 and M3 sites of β-Ca{sub 3}(PO{sub 4}){sub 2}-type structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Macroscopic and electric properties in the CdTe-AgI-As2Se3 system

Highlights: • Macroscopic properties of the pseudo-ternary CdTe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses. • Non-monotonic glass transition behaviour with increasing CdTe content. • Conductivity measurements of the pseudo-ternary CdTe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses. • Decrease of the Ag{sup +} ion transport in the CdTe-AgI-As{sub 2}Se{sub 3} glasses. • Blockage of silver-related preferential conduction pathways by Cd{sup 2+}. - Abstract: Chalcohalide glasses in the CdTe-AgI-As{sub 2}Se{sub 3} system were synthesised and characterised for the first time. Measurements including density, X-ray diffraction (XRD), and differential scanning calorimetry (DSC) were performed. The glass-forming range for (CdTe){sub x}(AgI){sub 0.5-x/2}(As{sub 2}Se{sub 3}){sub 0.5-x/2} compositions was found to be limited to x ≤ 0.25. The characteristic glass transition T{sub g}, crystallisation T{sub x}, and melting T{sub m} temperatures of the synthesised glasses are reported and the criteria, ΔT = T{sub x}-T{sub g}, was calculated to evaluate the glass forming ability. Total electric conductivity measurements have shown that the room temperature conductivity decreases drastically with increasing x accompanied by a simultaneous increase of the activation energy. The decrease in the Ag{sup +} ion transport cannot be explained by reduction in the total silver concentration alone and a possible structural origin of conductivity changes was proposed and discussed.

36 MATERIALS SCIENCE↗

Polyphosphazene polymer development for mixed matrix membranes using SIFSIX-Cu-2 i as performance enhancement filler particles

Phosphazene-based polymers were synthesized by using different pendant groups such as trifluoroethoxy (TFE), phenoxy (PHO) and octafluoropentoxy (OFP). High performance methoxyethoxyethoxy/cyclohexoxy (MEE/CH) based polyphosphazene was developed for the first time in literature using a mixed-substitution method. The structural, chemical, and thermal properties of these polymers were analyzed using several techniques such as Gel Permeation Chromatography (GPC), Thermal Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Nuclear Magnetic Resonance (NMR). Significant differences in gas transport properties of gases have been observed between these pendant groups because of their differences in glass transition temperature and physical interaction with CO 2 . For the first time, we report on the high performance of TFE polyphophazene based mixed matrix membranes (MMMs) using a SIFSIX-Cu-2i (SIFSIX) metal organic framework (MOF) as the filler particles. These MMMs showed a significant improvement in both CO 2 permeability and CO 2 /N 2 selectivity compared to pure TFE polyphosphazene membranes. As a result, the excellent gas transport properties of these membranes make them very promising material for carbon capture applications.

36 MATERIALS SCIENCE↗

Optimizing processing conditions for additively reinforced thermoforming (ART) in convergent manufacturing

This study utilized additively reinforced thermoforming (ART) to enhance the thermomechanical properties of polyethylene terephthalate glycol (PETG) sheet. ART materials were produced by overprinting PETG/carbon fiber filament (PETG/CF) on neat PETG sheets at varying conditions. The mechanical properties of the PETG sheet, PETG/CF, and ART materials were assessed, showing that ART exhibited superior tensile strength and modulus of elasticity. The tensile strength and modulus in the x-direction for ART at 265°C were 57.32 ± 2.9 MPa and 3.41 ± 0.4 GPa, respectively, compared to 49.1 ± 0.5 MPa and 1.92 ± 0.09 GPa for neat PETG. Microstructural analysis revealed strong interfacial adhesion between layers, while thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and heat deflection temperature analysis provided insights into the ART material's thermoforming behavior, aiding design optimization for enhanced stiffness, reduced necking, and improved customization. In conclusion, this information can be used to design for the thermoforming operation.

Additive reinforcement↗

Two-step annealing induced structural rejuvenation: A cause for memory effect in metallic glasses

The structural origin of the memory effect is still elusive in glassy materials. Here, in this letter, the memory effect in a series of metallic glasses (MGs) is observed by two step annealing using differential scanning calorimetry (DSC) and molecular dynamics simulations. It demonstrates that the Kovacs peak can be reflected from not only the system potential energy but also the atomic dynamics, showing the memory effect could originate from the formation of more loose packing configurations around mobile atoms by structural rejuvenation in the second step of high temperature annealing. In contrast, the high-low temperature annealing protocol can only induce the monotonic relaxation. Therefore, our results pave a pathway to better understand the origin of memory effect in MGs and other glassy materials from their dynamics and local atomic structure.

Memory effect↗

Synthesis and Characterization of Lignin-grafted-poly(ε-caprolactone) from Different Biomass Sources

Modification of lignin with poly(ε-caprolactone) is a promising approach to valorize industrial low-value lignins and to advance the bioeconomy. We have synthesized lignin grafted poly(ε-caprolactone) (lignin-g-PCL) copolymers via ring-opening polymerization of ε-caprolactone with different types of lignins of varying botanical sources (G-type pine lignin, S/G-type poplar lignin, and C-type Vanilla seeds lignin) and lignin extraction methods (Kraft and ethanol organosolv pulping). The lignin-g-PCL copolymer showed remarkably improved compatibility and dispersion in acetone, chloroform, and toluene in comparison to non-modified lignins. The structure and thermal properties of the lignin-g-PCL were investigated using Fourier-transform infrared spectroscopy (FTIR), 31 P nuclear magnetic resonance (NMR), 2D heteronuclear single quantum correlation (HSQC) NMR, gel permeation chromatography (GPC), and differential scanning calorimetry (DSC). Furthermore, we have found that all the technical lignins were reactive to the copolymerization reaction regardless of their plant source and isolation methods. The molecular weights of the synthesized lignin-g-PCL copolymers were positively correlated with the content of aliphatic lignin hydroxyls, suggesting that the copolymerization reaction tends to occur preferentially at the aliphatic hydroxyls rather than the phenolic hydroxyls of lignin. Thermal analyses of the lignin-g-PCL copolymers were studied, and in general, a reduction of melting temperature and crystallinity percentage in comparison to the neat PCL was observed. However, the thermal behavior of lignin-g-PCL copolymers varied depending on the lignin feedstocks employed in the copolymerization reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Gamma Irradiation and Oxidative Degradation of a Silica-Filled Silicone Elastomer

The radiation oxidative degradation of a commonly used silica-filled silicone elastomer DC745 was investigated by a series of experimental techniques. This elastomer is known to be chemically and thermally stable, but insufficient data exist on the radiation resistance. In the present work, gamma doses up to 200 kGy were applied under air at RT and 1Gy/s. Radiation chemical changes were investigated by NMR, FT-IR, Raman, and mass spectroscopy. DSC and TGA experiments probed thermal transitions and thermal stability changes with exposure dose. SEM probed variations on the surface of the elastomer, and solvent swelling methods were used to investigate changes in the polymer network properties. Electron paramagnetic resonance was employed to detect and identify free radicals. Uniaxial compression load tests at variable temperatures were performed to assess changes in the material’s mechanical response as a function of radiation dose. Results demonstrate that, with increasing exposure, DC745 undergoes changes in chemistry that lead to an increase in thermal stability and cross-link density, formation of free radical species, decrease in heat of fusion and increase in stiffness at low temperatures. Taken together, these results indicate that oxidative cross-linking is the dominant radiolysis mechanism that occurs when this material is exposed to gamma irradiation in air at high dose rates.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

The effects of gamma irradiation on RTV polysiloxane foams

The present paper involves the investigation of ionizing radiation effects on silica filled poly (dimethyl siloxane) foam vulcanized at room temperature. In order to better predict aging effects in these materials, it is important to understand the influence of irradiation on structural-rheological property relationships. Polysiloxane foams were subjected to moderate doses of gamma irradiation in an inert atmosphere and characterized by thermal (DSC and TGA), chemical (FT-IR, NMR, Mössbauer, mass spectroscopy, EPR, solvent swelling), microscopy (SEM and AFM), and mechanical (uniaxial compressive load) techniques. Radiation exposure induced cross-linking reactions that predominated over chain scission reactions for the dose range investigated. No long-lived radiation-induced radicals were detected and the porous structure of the irradiated foam remained unchanged. Finally, radiation exposure resulted in gas evolution, decrease in crystallization levels, slight changes in chemistry, and decrease in the molecular weight between cross-links, thereby hardening the foam.

36 MATERIALS SCIENCE↗

Coupled aging effects in nanofiber-reinforced siloxane foams

Here, this study investigates the combined effects of ionizing radiation and thermal treatments on the aging of siloxane foams containing small amounts of carbon nanofibers. Our siloxane foams were exposed to accelerated aging conditions for more than two years, resulting in very low dose rates. In addition, foams were aged under compressive load to evaluate the strength of the porous microstructure. Samples were characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (NMR), Mössbauer, mass spectroscopy, electron paramagnetic resonance spectroscopy (EPR), solvent swelling, imaging techniques, uniaxial compressive load testing and tear testing. No significant changes in thermal stability or chemistry of the accelerated aged foam were observed, although gas evolution was detected. Changes in crystallization levels at low temperatures, microstructure, and mechanical properties were observed for foams with and without carbon nanofibers. In particular, foams aged under compressive load showed irreversible deformation of the porous microstructure. This study demonstrates that aging effects were enhanced when thermal and radiolysis were coupled together and that the addition of carbon nanofibers did not improve aging effects.

36 MATERIALS SCIENCE↗

Quantitative analysis of changes in antioxidant in crosslinked polyethylene (XLPE) cable insulation material exposed to heat and gamma radiation

Quantitative analysis of the antioxidant poly(1,2-dihydro-2,2,4-trimethylquinoline) (pTMQ) was conducted on pristine, thermally-aged, and gamma radiation-aged commercial cross-linked polyethylene-(XLPE-)based cable insulation material aged at temperatures 60, 90, and 115?°C, with gamma radiation exposure dose rates of 0, 120, 300, and 540?Gy/h for 15 days. The quantification of antioxidant was performed using pyrolysis gas chromatography-mass spectrometry (Py-GCMS). Oxidation induction time (OIT) was measured using differential scanning calorimetry (DSC) and correlation was made between the quantified depletion of antioxidant and measured OIT. It was observed that, in the case of isothermal aging, the quantity of antioxidant and OIT decreased with increasing gamma radiation dose. In the case of samples exposed to the same gamma radiation dose, the quantity of antioxidant and OIT were observed to decrease with increasing aging temperature. Depletion in the quantity of antioxidant relative to that in the pristine material ranged from 7 to 93% for differently aged samples. The measured decline in OIT ranged from 0 to 80%. Change in the quantity of antioxidant in the material was observed to follow the same trend as the change in OIT when the samples were aged under various conditions. The observations are explained in terms of the reaction between the antioxidant and free radicals created during exposure of the samples to thermal and gamma radiation.

Pyrolysis gas chromatography-mass spectroscopy, an↗

Connecting radiation-driven changes in structural, thermal, and mechanical properties in several medical device polymers

Stemming from security threats and shortages in supply, a recent push has emerged to develop alternatives to radioisotope Cobalt-60 gamma radiation for sterilization of polymeric medical products, including electron beam (e-beam) and X-ray machine-based sources. However, before large-scale implementation, the effects of these non-isotope-based methods must be thoroughly investigated from several perspectives, involving their potential detrimental effects on the structural, thermal, and mechanical properties of polymers in medical devices. This paper investigates such effects in commonly used medical device polymers, including polypropylene homopolymer (PPH), polyolefin elastomer (POE), low-density polyethylene (LDPE), acrylonitrile butadiene styrene (ABS), and chlorobutyl rubber (CIIR). To connect radiation-driven changes in polymer structural and thermal properties and corresponding changes in mechanical properties, several characterization techniques were utilized, including gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC). We found that the tensile strength of X-ray irradiated PPH, as well as X-ray, e-beam, and gamma irradiated CIIR decreases due to chain scission, which is corroborated by GPC and DMA. The GPC results of LDPE suggest chain scission, but interestingly without a corresponding decline in tensile strength. By comparison, POE and ABS appear to undergo further crosslinking with increasing irradiation dose, which generally strengthens them. Importantly, in the vast majority of the cases, there were small to no changes in properties upon changing radiation technologies (at a given dose), i.e., no radiation source dependence. However, in a few specific cases, radiation method dependencies did arise, for instance, in terms of the molecular weight of PPH being significantly increased upon X-ray irradiation, while the melting temperature, glass transition temperature, and elongation at break reduced compared to gamma. Overall, this study provides valuable insight into radiation-driven chemical and structural changes in polymers that produce changes in physical and functional properties.

36 MATERIALS SCIENCE↗

Effects of Molecular Weight on poly( -pentadecalactone) Mechanical and Thermal Properties

A series of poly({omega}-pentadecalactone) (PPDL) samples, synthesized by lipase catalysis, were prepared by systematic variation of reaction time and water content. These samples possessed weight-average molecular weights (M{sub w}), determined by multi-angle laser light scattering (MALLS), from 2.5 x 10{sup 4} to 48.1 x 10{sup 4}. Cold-drawing tensile tests at room temperature of PPDL samples with M{sub W} between 4.5 x 10{sup 4} and 8.1 x 10{sup 4} showed a brittle-to-ductile transition. For PPDL with M{sub W} of 8.1 x 10{sup 4}, inter-fibrillar slippage dominates during deformation until fracture. Increasing M{sub W} above 18.9 x 10{sup 4} resulted in enhanced entanglement network strength and strain-hardening. The high M{sub W} samples also exhibited tough properties with elongation at break about 650% and tensile strength about 60.8 MPa, comparable to linear high density polyethylene (HDPE). Relationships among molecular weight, Young's modulus, stress, strain at yield, melting and crystallization enthalpy (by differential scanning calorimetry, DSC) and crystallinity (from wide-angle X-ray diffraction, WAXD) were correlated for PPDL samples. Similarities and differences of linear HDPE and PPDL molecular weight dependence on their mechanical and thermal properties were also compared.

59 BASIC BIOLOGICAL SCIENCES↗

Impact of Nanosilicates on Poly(vinylidene fluoride) Crystal Polymorphism: Part 1. Melt-crystallization at High Supercooling

Polymorphism of poly(vinylidene fluoride), PVDF, in the presence of Lucentite STN organically modified silicate (OMS) is investigated for PVDF nanocomposites melt-crystallized at high supercooling temperatures where neat PVDF crystallizes exclusively in the alpha crystalline phase. Nanocomposites were prepared from solution with 0-1.0 wt% OMS composition. Here we observed that clay addition promotes gamma phase formation in nanocomposites melt-crystallized at high supercooling (i.e., at low crystallization temperature), whereas previously we showed that even small amount of nanosilicates resulted in beta phase formation in cold-crystallized PVDF nanocomposites. Wide-angle X-ray scattering (WAXS), Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies showed that {alpha}- and {gamma}-phases co-existed in nanocomposites containing up to 0.1 wt% OMS, and the amount of {alpha}-crystals substantially diminished for higher OMS content. Formation of {gamma}-crystal phase was confirmed with morphologic observation of spherulites of low-birefringence using polarizing optical and atomic force microscopies, and their crystalline structures were verified by FTIR and Raman microscopic spectroscopy. We also address in this work the ambiguities in assessing PVDF crystallographic phases, and correct the phase identification errors which have persisted up to this point in the literature based on melting point confusion. The crystal phase identification for PVDF nanocomposites is discussed and clarified, based on X-ray scattering, vibrational spectra, and thermal analysis. For reference, we provide a vibrational band list, indicating the close, or overlapping bands, of the three phases of PVDF: {alpha}, {beta} and {gamma}.

36 MATERIALS SCIENCE↗

Polymer electrolyte membranes from fluorinated polyisoprene-block-sulfonated polystyrene: Structural evolution with hydration and heating

Small-angle neutron scattering (SANS) and ultra-small-angle X-ray scattering (USAXS) have been used to study the structural changes in fluorinated polyisoprene/sulfonated polystyrene (FISS) diblock copolymers as they evolved from the dry state to the water swollen state. A dilation of the nanometer-scale hydrophilic domains has been observed as hydration increased, with greater dilation occurring in the more highly sulfonated samples or upon hydration at higher temperatures. Furthermore, a decrease in the order in these phase separated structures is observed upon swelling. The glass transition temperatures of the fluorinated blocks have been observed to decrease upon hydration of these materials, and at the highest hydration levels, differential scanning calorimetry (DSC) has shown the presence of tightly bound water. A precipitous drop in the mechanical integrity of the 50% sulfonated materials is also observed upon exceeding the glass transition temperature (Tg), as measured by dynamic mechanical analysis (DMA).

36 MATERIALS SCIENCE↗