Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cu”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Interpreting the Operando X-ray Absorption Near-Edge Structure of Supported Cu and CuPd Clusters in Conditions of Oxidative Dehydrogenation of Propane: Dynamic Changes in Composition and Size

Supported subnano-cluster catalysts are highly dynamic, developing true active sites only under the pressures and temperatures of reaction conditions. Operando X-ray absorption near-edge structure (XANES) spectroscopy can track changes in the oxidation state and the local environment of cluster atoms, providing insight into the development of these active sites. While bulk metal, oxide, and hydroxide standards are often used for fitting experimental XANES spectra to obtain average oxidation states, we recently showed that computed cluster standards of relevant compositions are a more suitable basis, producing more accurate fits. Here, we theoretically interpret the operando XANES of supported Cu 3 Pd and Cu 4 clusters during temperature-programmed reaction (TPRx) of oxidative dehydrogenation of propane. We use an expanded basis set including both globally optimized computed clusters and bulk standards. Not only can we track reversible composition/oxidation state change with temperature, but also the irreversible growth of the bulk fraction upon heating, which we attribute to cluster sintering. This has important implications for the mechanism of the catalyzed reaction and the nature of the available active sites. Here, we propose that operando XANES provides most significant insight into the nature of supported cluster catalysts in reaction conditions when interpreted using mixed computed cluster and bulk standards.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Screening of Cu-Based Catalysts for Selective Methane to Methanol Conversion

Developing selective catalysts for methane conversion to added value chemicals has been considered as a promising approach for efficient utilization of abundant natural gas resources. Here, we present a descriptor-based screening for high methane conversion and methanol selectivity at the interfaces between metal oxide clusters and Cu 2 O/Cu(111) support (MO x /Cu 2 O/Cu(111), M = Mg, Fe, Co, Ni, Cu, Zn, Ti, Zr, Sn, Ce) on exposure to the mixture of CH 4 /O 2 /H 2 O. Wherein, the activation energy of direct methane to methanol conversion, *OH + *CH 4 → *CH 3 OH + *H, and the ratio for adsorption energy of oxygen and water, E ads (O 2 )/E ads (H 2 O), are identified as the effective descriptor for methane conversion and methanol selectivity, respectively. Finally, by providing an exceptional oxygen and hydroxyl sites with high-lying O 2p states, the MgO/Cu 2 O/Cu(111) catalyst is found to be the most promising system among the systems studied, being able to provide the highest methane conversion with high methanol selectivity.

03 NATURAL GAS↗
DOE OSTI2024

Atomic-Scale Visualization of Surface Segregation and Ordering of Pt in a Dilute Cu(Pt) Alloy under a Hydrogen Atmosphere

Surface segregation is a common phenomenon in alloys exposed to reactive atmospheres, yet the atomic mechanisms underlying surface structure and composition dynamics remain largely unexplored. Using a combination of environmental transmission electron microscopy observations and atomistic modeling, here we report the surface segregation process of Pt atoms in a dilute Pt(Cu) alloy and determine the distribution of Pt atoms at both atomically flat and stepped surfaces of the Pt(Cu) alloy at elevated temperatures and in a hydrogen gas atmosphere. Through directly probing Pt segregation, we find that Pt atoms segregated on the (100) surface exhibit a p(2 × 2) ordering, with ~25% Pt occupancy. In contrast, on the stepped (410) surface, hydrogen adsorption induces Pt segregation, initially occurring at the step edges, which then expands to the terrace sites upon increased hydrogen coverage, resulting in an ordered distribution of segregated Pt atoms with ~22% occupancy. Finally, these observations offer mechanistic insights into the structure and composition dynamics of the topmost atomic layer of the alloy in response to environmental stimuli and hold practical implications for the design and optimization of catalysts based on Pt group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis and Evaluation of Cu@ZnO Core@Shell Nanowires for Use in the Carbon Dioxide Thermal Reduction Reaction

Copper-based core@shell nanomaterials are of interest for the catalytic hydrogenation of carbon dioxide toward value-added products. In this context, we have developed a facile, microwave-based procedure for the reliable and reproducible synthesis of Cu@ZnO core@shell nanowires. A systematic assessment of the effect of rationally varying various reaction conditions on this protocol was completed in order to better evaluate the growth process of these core–shell motifs. We determined that among different reaction parameters, it was the critical role of reaction time which enabled the quantitatively reliable growth of external shells with tunable thicknesses of up to 20 nm. As a demonstration of the material’s practical viability, catalytic testing was subsequently performed for the reverse water–gas shift reaction (CO 2 + H 2 → CO + H 2 O), with the evolution of the process followed with in situ X-ray diffraction and X-ray absorption spectroscopy in order to probe structural changes and gauge stability. These tests found the catalysts to be effective at converting CO 2 to CO, with notable stability detected in the shell layer and no observed alloying between copper and zinc. Furthermore, our studies support the idea that the Cu–ZnO and CuO x –ZnO interfaces are essential for the effective activation of CO 2 and H 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2026

Domain-Dependent Electronic Properties of 2D Copper Boride Synthesized from Reversible Subsurface Diffusion on Cu(111)

Emerging boron-based 2D materials hold properties with potential applications ranging from electronic devices to catalysis and energy storage. Using physical vapor deposition, 2D copper borides are formed on Cu(111) at elevated temperatures. However, the as-prepared surfaces often contain boron clusters that compromise structural homogeneity, and the dynamics of their formation is not yet fully understood. Through in situ low-energy electron microscopy (LEEM), Auger electron spectroscopy (AES), and scanning tunneling microscopy/spectroscopy (STM/STS), we show that cluster-free 2D CuB x is synthesized via reversible subsurface diffusion of boron atoms. The resolved regular atomic structure aligns with the previously calculated Cu 8 B 14 model. In a rare case, possibly due to surface strain and a change of orientation, a second domain of CuB x was observed with a pronounced change in electronic properties, yet electronic states remain delocalized in both domains. In conclusion, these findings demonstrate the sensitivity of electronic properties to domain structure and highlight a potential opportunity to tune 2D CuB x for diverse applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Exfoliation of Cu-Containing Poly(triazine imide): From Three-Dimensional to Two-Dimensional Particle Morphology

Controlling the morphological parameters of extended covalent organic frameworks remains challenging and represents an important yet often elusive metric of consideration. Typically, carbon nitride materials possess local ordering but remain largely amorphous in terms of their long-range order and orientation. This study probes the synthesis of a crystalline carbon nitride, poly(triazine imide) lithium bromide which possesses an atomically-precise extended structure, and demonstrates its exfoliation into a two-dimensional hexagonal sheet-like morphology. Furthermore, a previously unreported carbon nitride material, poly(triazine imide) copper bromide, or PTI-CuBr, was developed through an additional flux-assisted cation-exchange process and is shown to retain its internal Cu cations during solvothermal exfoliation. Characterization by dynamic light scattering and high-angle annular dark-field scanning electron microscopy reveals the morphological changes and captures the high aspect ratio of the thin carbon nitride sheets with <10 nm thickness while maintaining hundreds of nm in width. Additional characterization by energy-dispersive spectroscopy and X-ray photoelectron spectroscopy confirms that the Cu:Br:N molar ratio was maintained within the extended layers throughout the exfoliation process. This top-down synthesis approach differs from typical methods that isolate thin sheets for subsequent metal−cation coordination and illustrates the importance of maintaining oxygen-free conditions to minimize copper clustering. Thus, this new approach is demonstrated to provide a consistent and more homogeneous occupancy of the PTI pore spaces throughout the carbon nitride framework.

Exfoliation↗
DOE OSTI2023

Cu-Doped Iron Oxide for the Efficient Electrocatalytic Nitrate Reduction Reaction

The electrochemical nitrate reduction reaction (NO 3 RR) is a promising alternative synthetic route for sustainable ammonia (NH 3 ) production, because it not only eliminates nitrate (NO 3 – ) from water but also produces NH 3 under mild operating conditions. However, owing to the complicated eight-electron reaction and the competition from the hydrogen evolution reaction, developing catalysts with high activities and Faradaic efficiencies (FEs) is highly imperative to improve the reaction performance. In this study, Cu-doped Fe 3 O 4 flakes are fabricated and demonstrated to be excellent catalysts for electrochemical conversion of NO 3 – to NH 3 , with a maximum FE of ~100% and an NH 3 yield of 179.55 ± 16.37 mg h –1 mg cat –1 at –0.6 V vs RHE. Here, theoretical calculations reveal that doping the catalyst surface with Cu results in a more thermodynamically facile reaction. These results highlight the feasibility of promoting the NO 3 RR activity using heteroatom doping strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Role of Cation Ordering on Device Performance in (Ag,Cu)InSe 2 Solar Cells with KF Post-Deposition Treatment

CuInSe 2 (CIS) has been proposed as an attractive bottom cell candidate in tandem solar cells. However, to justify the coupling with high-performance top cells (e.g., perovskites, GaAs), significant work on improving the efficiency is required. To this extent, several authors have demonstrated the benefits of alkali post-deposition treatments (PDT) to increase device open-circuit voltage (V oc ) in CIS and how Ag alloying - (Ag,Cu)InSe 2 (ACIS) - reduces defect density and enhances current collection in devices. Herein, we present a detailed study of the role that KF-PDT plays on CIS and ACIS absorber composition and structure, and propose an explanation for the decreased V oc observed when silver and potassium coexist in the system (ACIS + KF). Through a suite of synchrotron-based techniques, we investigate the nanoscale chemical distribution of the films and the formation of secondary phases. Through photoluminescence imaging, we observed a high degree of passivation with the addition of KF, and synchrotron-based X-ray diffraction confirmed the absence of a KInSe 2 surface layer usually considered to be a passivating agent. Raman spectroscopy and synchrotron X-ray fluorescence show the increased presence of Cu- and Se-poor clusters in ACIS + KF, which are correlated to significantly reduced X-ray beam-induced current (XBIC). An increase in the intensity of the E/B 2 stretching mode of CIS is attributed to cation ordering near the junction and is found to track inversely to bulk V oc measurements. The cation ordering is hypothesized to arise from the formation and redistribution of defects that normally occur near the surfaces of CIS as a consequence of its polar character. Here, these defects compensate each other, and the overall inhomogeneity of the charge distribution generates electrostatic potential fluctuations that greatly increase the saturation current and hence reduce the open-circuit voltage of the device.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Combined Rotating Disk Slurry Electrodeposition–Spontaneous Galvanic Displacement for Pt-M (M = Co, Ni, and Cu) Catalyst Synthesis for the Oxygen Reduction Reaction in Alkaline Media

Here, platinum-modified first-row transition-metal catalyst (M = Ni, Co, and Cu) nanoparticles on a carbon black Vulcan XC-72R (CBV) support were synthesized using rotating disk slurry electrodeposition (RoDSE) followed by spontaneous galvanic displacement (SGD) reactions. These RoDSE–SGD catalysts were evaluated for the oxygen reduction reaction (ORR) in 0.1 M KOH using rotating disk electrode techniques. The Ni and Co RoDSEs were done by using an electrochemical applied potential of -0.75 V versus the RHE and for Cu, -0.80 V versus the RHE using a CBV slurry solution containing 0.1 M KClO 4 . These metal nanoparticles on CBV (M/CBV) catalysts were modified with a Pt precursor via a spontaneous galvanic displacement (SGD) reaction, producing a Pt-M/CBV material to catalyze the ORR in an alkaline medium. High-resolution scanning transmission electron microscopy (HR-STEM) analysis indicates that the PtM/CBV samples include M clusters and Pt single atoms. The ORR characterization measurements were done under a controlled temperature (25.0 °C) and with a mass loading of 100 μg/cm 2 on a glassy carbon (GC) rotating disk electrode at 1600 rpm. The PtCo/CBV showed the highest ORR mass activity of 0.741 A/mgPt at 0.90 V versus the reversible hydrogen electrode (RHE) compared with commercial Pt/CBV. The M/CBV RoDSE catalysts were also tested for the oxygen evolution reaction (OER), and Ni/CBV provided the lowest overpotential of 450 mV at 10 mA/cm 2 disk in 0.1 M KOH.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2021

Probing Active Sites in Cu x Pd y Cluster Catalysts by Machine-Learning-Assisted X-ray Absorption Spectroscopy

Size-selected clusters are important model catalysts because of their narrow size and compositional distributions, as well as enhanced activity and selectivity in many reactions. Still, their structure-activity relationships are, in general, elusive. The main reason is the difficulty in identifying and quantitatively characterizing the catalytic active site in the clusters when it is confined within subnanometric dimensions and under the continuous structural changes the clusters can undergo in reaction conditions. Using machine learning approaches for analysis of the operando X-ray absorption near-edge structure spectra, we obtained accurate speciation of the Cu x Pd y cluster types during the propane oxidation reaction and the structural information about each type. As a result, we elucidated the information about active species and relative roles of Cu and Pd in the clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Cu[Ni(2,3-pyrazinedithiolate) 2 ] Metal–Organic Framework for Electrocatalytic Hydrogen Evolution

The application of metal–organic frameworks (MOFs) as electrocatalysts for small molecule activation has been an emerging topic of research. Previous studies have suggested that two-dimensional (2D) dithiolene-based MOFs are among the most active for the hydrogen evolution reaction (HER). Here, a three-dimensional (3D) dithiolene-based MOF, Cu[Ni(2,3-pyrazinedithiolate) 2 ] (1), is evaluated as an electrocatalyst for the HER. In pH 1.3 aqueous electrolyte solution, 1 exhibits a catalytic onset at –0.43 V vs the reversible hydrogen electrode (RHE), an overpotential (η 10 mA/cm 2 ) of 0.53 V to reach a current density of 10 mA/cm 2 , and a Tafel slope of 69.0 mV/dec. Interestingly, under controlled potential electrolysis, 1 undergoes an activation process that results in a more active catalyst with a 200 mV reduction in the catalytic onset and η 10 mA/cm 2 . It is proposed that the activation process is a result of the cleavage of Cu–N bonds in the presence of protons and electrons. Furthermore, this hypothesis is supported by various experimental studies and density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Spinel Cu–Mn–Cr Oxide Nanoparticle-Pigmented Solar Selective Coatings Maintaining >94% Efficiency at 750 °C

High-temperature concentrating solar power (CSP) system is capable of harvesting and storing solar energy as heat towards cost-effective dispatchable solar electricity. Solar selective coating is a critical component to boost its efficiency by maximizing solar absorptance and minimizing thermal emittance losses. However, maintaining a high solar-thermal conversion efficiency >90% for long-term operation at ≥750 ºC remains a significant challenge. Herein, we report spray-coated spinel Cu-Mn-Cr oxide nanoparticle-pigmented solar selective coatings on Inconel tube sections maintaining ≥94% efficiency at 750 ºC and ≥92.5% at 800 ºC under 1000x solar concentration after 60 simulated day-night thermal cycles in air, each cycle comprising 12h at 750 ºC/800 ºC and 12h cooling to 25 ºC. The solar spectral selectivity is intrinsic to the band-to-band and d-d transitions of non-stoichiometric spinel Cu-Mn-Cr oxide nanoparticles. Furthermore, this feature offers a large fabrication tolerance in nanoparticle volume fraction and coating thickness, facilitating low-cost and scalable spray-coated high-efficiency solar selective absorbers for high-temperature CSP systems.

14 SOLAR ENERGY↗
DOE OSTI2025

Heterobinuclear Molecular Precursors Direct the Formation of Supported Subnanometer Cu–M Clusters with Tunable Catalytic Behavior

Subnanometer bimetallic clusters hold great promise for catalytic applications due to their unique electronic properties and high surface-to-volume ratios. However, precise control over their composition and size remains a major challenge, particularly for immiscible metal pairs. Here, we report a surface-anchored molecular approach for synthesizing ∼0.7–0.8 nm Cu–M (M = Ru, Mo, W, Fe) bimetallic clusters on mesoporous silica supports, using heterobinuclear N-heterocyclic carbene (NHC)-based complexes as precursors. The NHC ligand functionalized with an alkoxysilane anchor enables robust grafting to the silica interface. Controlled calcination and reduction lead to subnanometer clusters with tunable composition, dictated by the metal–metal bond stability in the precursor. In situ transmission electron microscopy reveals cluster growth proceeds via sintering of adjacent surface-bound units, while elevated temperatures above 300 °C triggering diffusion and phase separation. Catalytic testing in ethylene hydrogenation demonstrates composition-dependent activity and kinetics, with CuRu and CuW clusters exhibiting lower apparent activation energy barriers compared with monometallic Cu nanoparticles. This study establishes a generalizable strategy for the interfacial synthesis of alloyed clusters from molecular precursors and provides mechanistic insight into how precursor design governs nanostructure formation and catalytic behavior.

N-heterocyclic carbene↗
DOE OSTI2020

Cerium(IV) Enhances the Catalytic Oxidation Activity of Single-Site Cu Active Sites in MOFs

The rates of catalytic oxidation of cyclohexane and CO are four and twenty times higher, respectively, with Cu supported on a cerium-based MOF than on the structurally analogous zirconium material. Both Ce- and Zr-based copper catalysts feature uncommon threecoordinate CuII sites bearing different nuclearities, as observed by Cu K-edge extended X-ray absorption fine structure analysis. These findings offer molecular-level understanding of the metal-support interface in MOF catalysts and establish correlations with the more established literature on zirconia and ceria-supported heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 Methanation on Cu-Cluster Decorated Zirconia Supports with Different Morphology: A Combined Experimental In Situ GIXANES/GISAXS, Ex Situ XPS and Theoretical DFT Study

We report that subnanometer copper tetramer-zirconia catalysts turn out to be highly efficient for CO 2 hydrogenation and its conversion to methane. The cluster size and substrate morphology are controlled to optimize the catalytic performance. The two types of zirconia supports investigated are prepared by atomic layer deposition (~ 3 nm thick film) and supersonic cluster beam deposition (nanostructured film, ~ 100 nm thick). The substrate plays a crucial role in determining the activity of the catalyst as well as its cyclability over repeated thermal ramps. A temperature-programmed reaction combined with in situ X-ray characterization reveals the correlation between the evolution in the oxidation state and catalytic activity. Ex situ photoelectron spectroscopy indicates Cu clusters with stronger interactions with the nanostructured film, which can be the cause for the higher activity of this catalyst. Density functional theory calculations based on the Cu 4 O 2 cluster supported on a ZrOx subunit reveal low activation barriers and provide mechanism for CO 2 hydrogenation and its conversion to methane. Altogether, the results show a new way to tune the catalytic activity of CO 2 hydrogenation catalysts through controlling the morphology of the support at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Configuration Space Integration for Adsorbate Partition Functions: The Effect of Anharmonicity on the Thermophysical Properties of CO–Pt(111) and CH 3 OH–Cu(111)

A method for computing anharmonic thermophysical properties for adsorbates on metal surfaces has been extended to include libration, or frustrated rotation. Classical phase space integration is used with Monte Carlo sampling of the configuration space to obtain the partition function of CO on Pt(111) and CH 3 OH on Cu(111). A minima-preserving neural network potential energy surrogate is used within the integration routines. Direct state counting using discrete variable representation is used to benchmark the results. We find that the phase space integration approach is in excellent agreement with the direct state counting results. Comparison with standard models such as the harmonic oscillator indicates that anharmonicity contributes significantly to the thermodynamic properties of CH 3 OH on Cu(111). We find that there is also a considerable difference between the harmonic oscillator and phase space integration for CO on Pt(111), although the discrepancy can largely be attributed to the presence of multiple binding sites within the unit cell. We demonstrate that a multisite harmonic oscillator model might be sufficient for CO-Pt(111). A more thorough description of the potential energy surface, which can be achieved with phase space integration, is necessary for weakly bound adsorbates such as CH 3 OH. In conclusion, the thermophysical properties were used to calculate free energies of adsorption on the respective metals, and subsequently the equilibrium constants and Langmuir isotherms in relevant temperature ranges. The results show that the choice of model to obtain partition functions greatly affects the resulting surface coverages in kinetic models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Biomimetic Fe–Cu Porphyrrole Aerogel Electrocatalyst for Oxygen Reduction Reaction

The development of bioinspired catalysts for oxygen reduction reaction is one of the most prominent pathways in the search for active materials to replace Pt-based catalysts in fuel cells. Herein, we report innovative bioinspired catalysts using a directed synthetic pathway to create adjacent Cu and Fe sites. This catalyst is composed of a covalent 3D framework in an aerogel form. Aerogels are high surface area and porous hierarchical structures that can allow the formation of ultrahigh active site density and optimized mass transport of reactants and products to and from the catalytic sites. The aerogel-based catalyst exhibits high performance in a half-cell in 0.1 M KOH, with an onset potential of 0.94 V vs RHE and half-wave potential of E 1/2 = 0.80 V vs RHE, high selectivity toward the four-electron reduction of oxygen to hydroxide anions, and high durability. These results are well-translated to the anion exchange membrane fuel cell (AEMFC), reaching an open circuit potential of 0.97 V and iR-corrected peak power density of 0.51 W cm –2 . Based on density functional theory calculations, the improved activity relative to the Fe-porphyrin and Cu-corrole is ascribed to the effect of the extended carbon network and the proximity of the metal sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Establishing the Role of Operating Potential and Mass Transfer in Multicarbon Product Generation for Photoelectrochemical CO 2 Reduction Cells Using a Cu Catalyst

There is increasing interest in the possibility of photoelectrochemical (PEC) reduction of CO 2 to C 2+ products; however, the criteria for maximizing PEC solar-to-C 2+ (STC 2+ ) rates are not well understood. We report here a continuum-scale model of PEC CO 2 reduction (CO 2 R) on Cu in 0.1 M CsHCO 3 and use it to optimize the design and operating conditions for generating C 2+ products. Furthermore, we demonstrate that the potential-dependent product distribution of CO 2 R on Cu requires operating near the potential that maximizes C 2+ generation rates ($V$ id ), unlike PEC water splitting, which desires operation at the maximum photocurrent density. Because of this requirement, the criterion for a high STC 2+ rate includes high-photocurrent semiconductors with photovoltages near $V$ id and low series resistance. The STC 2+ rate in these systems is enhanced by optimal CO 2 transport and exhibits low sensitivity to dirunal solar irradiance variations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗