Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coil”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Robust identification of multiple-input single-output system response for efficient pickup noise removal from tokamak diagnostics

We report electromagnetic pickup noise in the tokamak environment imposes an imminent challenge for measuring weak diagnostic photocurrents in the nA range. The diagnostic signal can be contaminated by an unknown mixture of crosstalk signals from coils powered by currents in the kA range. To address this issue, an algorithm for robust identification of linear multi-input single-output (MISO) systems has been developed. The MISO model describes the dynamic relationship between measured signals from power sources and observed signals in the diagnostic and allows for a precise subtraction of the noise component. The proposed method was tested on experimental diagnostic data from the DIII-D tokamak, and it has reduced noise by up to 20 dB in the 1–20 kHz range.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Kinetic simulations verifying reconnection rates measured in the laboratory, spanning the ion-coupled to near electron-only regimes

The rate of reconnection characterizes how quickly flux and mass can move into and out of the reconnection region. In the Terrestrial Reconnection EXperiment (TREX), the rate at which the antiparallel asymmetric reconnection occurs is modulated by the presence of a shock and a region of flux pileup in the high-density inflow. Simulations utilizing a generalized Harris-sheet geometry have tentatively shown agreement with TREX's measured reconnection rate scaling relative to system size, which is indicative of the transition from ion-coupled toward electron-only reconnection. Here, in this study, we present simulations tailored to reproduce the specific TREX geometry, which confirm both the reconnection rate scale and the shock jump conditions previously characterized experimentally in TREX. The simulations also establish an interplay between the reconnection layer and the Alfvénic expansions of the background plasma associated with the energization of the TREX drive coils; this interplay has not yet been experimentally observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Non-inductive plasma vertical position measurement for the 1056 s discharge on EAST

Vertical position stability plays a crucial role in maintaining safe and reliable plasma operation for long-pulse fusion devices. In general, the vertical position is measured by using inductive magnetic coils installed inside the vacuum vessel; however, the integration drift effects are inherent for steady-state or long-pulse plasma operation. Further, developing a non-magnetic approach provides a fusion reactor-relevant steady-state solution that avoids the negative impact of integration drift. In this paper, we compare the non-inductively determined vertical position achieved by line-integrated interferometer and polarimeter measurements to that employing an inductive flux loop for a 1056 s discharge recently achieved on EAST (Experimental Advanced Superconducting Tokamak). Experimental results show that the non-inductive measurement is more robust than flux loops after 300 s if the integrator is not reset to suppress integrator drift. Real-time vertical position control using the non-inductive system is proposed for the next EAST experimental campaign.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Gyrokinetic analysis of inter-edge localized mode transport mechanisms in a DIII-D pedestal

In this study, gyrokinetic simulations are used to study pedestal fluctuations for DIII-D discharge 174082 using the GENE code. Nonlinear local simulations indicate that electron heat flux has contributions from electron temperature gradient-driven transport but at levels insufficient to satisfy power balance. We show that microtearing modes (MTM) and neoclassical transport are likely to account for the remaining observed energy losses in the electron and ion channels, respectively. The MTM instabilities found in the simulations are consistent with the high-frequency fluctuations identified in the magnetic fluctuation data from Mirnov coils. The fluctuation data in this discharge also exhibit a low-frequency band of fluctuations. By modifying the equilibrium profiles and plasma β, simulations produce MHD modes, which may be responsible for these observed low-frequency fluctuations. We compare several metrics involving ratios of fluctuation amplitudes and transport quantities for both MTMs and MHD modes. This analysis suggests that the available data are consistent with the simultaneous activity of both MHD modes and MTMs provided that the former is limited largely to the particle transport channel.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

EUV debris mitigation using magnetic nulls

Next generation EUV sources for photolithography use light produced by laser-produced plasmas (LPP) from ablated tin droplets. A major challenge for extending the lifetime of these devices is mitigating damage caused by deposition of tin debris on the sensitive collection mirror. Especially difficult to stop are high energy (up to 10 keV) highly charged tin ions created in the plasma. Existing solutions include the use of stopping gas, electric fields, and magnetic fields. One common configuration consists of a magnetic field perpendicular to the EUV emission direction, but such a system can result in ion populations that are trapped rather than removed. Here we investigate a previously unconsidered mitigation geometry consisting of a magnetic null by performing full-orbit integration of the ion trajectories in an EUV system with realistic dimensions and optimize the coil locations for the null configuration. The magnetic null prevents a fraction of ions from hitting the mirror comparable to that of the perpendicular field, but does not trap any ions due to the chaotic nature of ion trajectories that pass close to the null. This technology can potentially improve LPP-based EUV photolithography system efficiency and lifetime and may allow for a different, more efficient formulation of buffer gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Toward continuum gyrokinetic study of high-field mirrors

High-temperature superconducting (HTS) magnetic mirrors under development exploit strong fields with high mirror ratio to compress loss cones and enhance confinement and may offer cheaper, more compact fusion power plant candidates. This new class of devices could exhibit largely unexplored interchange and gradient-driven modes. Such instabilities, and methods to stabilize them, can be studied with gyrokinetics, given the strong magnetization and prevalence of kinetic effects. Our focus here is to (a) determine if oft-used gyrokinetic models for open field lines produce the electron-confining (Pastukhov) electrostatic potential and (b) examine and address challenges faced by gyrokinetic codes in studying HTS mirrors. Here, we show that a one-dimensional limit of said models self-consistently develops a potential qualitatively approaching the analytical Pastukhov level. Additionally, we describe the computational challenges of studying high mirror ratios with open field line gyrokinetic solvers and offer a force softening method to mitigate small time steps needed for time integration in colossal magnetic field gradients produced by HTS coils, providing a 19X speedup.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Magnetic field properties in non-axisymmetric divertors

Stellarator power plants require a plan for the removal of the particles and the heat that are exhausted across the plasma edge. Unless a flowing liquid metal can be used to carry the helium exhaust to places where it can be removed from the plasma chamber, the particle exhaust must be magnetically diverted into pumping chambers. Studies are required to determine how magnetic features relate to the required divertor properties, how these magnetic features can be produced, and how they can be controlled. General studies are clarified and simplified by the use of the magnetic field line Hamiltonian $ψ_p(ψ,θ,φ)$ and a vector $\vec{x}(ψ,θ,φ)$ that gives the point in space associated with each point in the $(ψ,θ,φ)$ canonical coordinates, a flux and two angles. The non-resonant Fourier terms in ψp can be removed by a canonical transformation, so only resonant Fourier terms can determine the field line properties in the plasma edge and divertor. This paper discusses the important divertor properties and explains how $ψ_p(ψ,θ,φ)$ and $\vec{x}(ψ,θ,φ)$ can be obtained numerically in a special form for any stellarator magnetic field, $\vec{B}(\vec{x})$. This form holds between an arbitrary magnetic surface and the chamber walls with the non-resonant terms eliminated. Studies based on variations in the terms in such derived field-line Hamiltonians can determine what magnetic features are mathematically possible and how they could be produced and controlled by the external magnetic field coils.

Physics↗
DOE OSTI2023

Implementation of a drive cylinder for low collisional experiments on magnetic reconnection

For most laboratory plasma experiments, Coulomb collisions between the particle species are sufficiently frequent that the particle distribution functions are relaxed to a near-Maxwellian form. This hampers the applicability of such experiments to phenomena observed in tenuous and near-collisionless space plasma. The Terrestrial Reconnection EXperiment (TREX) at the Wisconsin Plasma Physics Laboratory aims to study collisionless reconnection for parameters relevant to the Earth’s magnetosphere. To reduce the role of collisional effects, a reconnection Drive Cylinder has been developed, which increases both the effective system size of the TREX configuration and the rate at which reconnection can be driven. These two effects now permit TREX to reach a kinetic reconnection regime where collisional effects are minimized. The Drive Cylinder is comprised of 12 single loop drive-coils connected in parallel to a 10 kV capacitor bank. Insulated sheets of aluminum are applied to smooth the magnetic fields and enhance the drive efficiency. Following is a description of the technical details and performance of the Drive Cylinder.

Instruments & Instrumentation↗
DOE OSTI2024

Local dynamic responses of magnetic reconnection to three-dimensional perturbations in a laboratory plasma

The dynamic responses of magnetic reconnection to localized three-dimensional (3D) magnetic field perturbations imposed by a pair of figure-8-shaped coils are investigated in the Magnetic Reconnection Experiment (MRX) device. Both the magnetic field geometry and current sheet profiles are altered by external perturbations. For the case when the inductive electric field associated with these perturbations aligns with the preexisting reconnection electric field, O-type magnetic structures appear within an elongated current sheet. When these magnetic structures are ejected downstream at the speed close to the ion outflow velocity, the inductive electric field is enhanced considerably. Despite that the imposed perturbation amplitude is larger than 30% of the original reconnecting magnetic field, the overall reconnection process remains robust without current sheet disruptions. This technique to form O-type magnetic structures can serve as an additional experimental knob for future systematic laboratory investigations of 3D magnetic reconnection and related instabilities without disrupting two-dimensional current sheet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Time-resolved biphase signatures of quadratic nonlinearity observed in coupled Alfvén eigenmodes on the DIII-D tokamak

We report the detection of nonstationary quadratic coupling between toroidicity-induced Alfvén eigenmodes (TAEs) on sub-millisecond time scales. Identification of phase coherency between multiple TAEs and nonlinearly generated modes is facilitated by wavelet-based bicoherence analysis of time-series from inductive coils, taken from a DIII-D discharge heated by neutral beam injection (NBI). Characterization of nonlinear three-wave interaction is inferred by stationary local bispectrum phase (biphase) and confirmed via bandpass filtering. Biphase dynamics associated with prominent bispectral features are well-resolved in time and consistent with transient quadratic coupling. Onset and duration of nonlinearity are correlated with enhanced amplitude of participating TAEs; coincident changes in amplitude are observed for modes at difference frequency |f TAE,1 - f TAE,2 |.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Needed computations and computational capabilities for stellarators

Stellarator plasmas are externally controlled to a degree unparalleled by any other fusion concept, magnetic or inertial. This control is largely through the magnetic fields produced by external coils. The development of fusion energy could be expedited by carrying out remarkably straight-forward computations to define strategies for exploiting this external control. In addition to these computations, which have a reliability limited only by competence, certain physics areas that affect the development of stellarator power plants should have a more intense study. The low cost and speed with which computations can be carried out relative to experiments have implications for the development of fusion. Computations should be used to develop a strategy that to the extent possible allows major issues to be circumvented. Required computations for this strategy are the subject of this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

An octahedral Mach B-dot probe for 3D flows and magnetic fields in the edge of reversed field pinches

Measurements and simulations show that plasma relaxation processes in the reversed field pinch drive and redistribute both magnetic flux and momentum. To examine this relaxation process, a new 3D Mach B-dot probe has been constructed. This probe collects ion saturation currents through six molybdenum electrodes arranged on the flattened vertices of an octahedron made of boron nitride (BN). The ion saturation current flows through configurable voltage dividers for measurement and returns through one of six selectable return electrodes equally spaced along the 12 cm BN probe arm. In addition, the probe arm houses three B-dot magnetic pickup coils in the BN stalk immediately below to the octahedron, to measure the local magnetic field. Inserted in the Madison Symmetric Torus (MST) during deuterium discharges with 220 kA plasma current, density of 0.8 × 10 13 cm –3 , the probe collects ion saturation currents with sawtooth-like peaks correlated with relaxation events. This compact octahedral design fitting six Mach electrode surfaces within a 1 cm3 cube will enable future multi-point, multi-field probes compatible with the 1.5 in. ports of MST. Such probes will allow for flow circulation, current, and canonical vorticity to be calculated in the center of the finite difference stencil formed by the measurement locations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Absolute magneto-optical measurement of magnetic field on a long pulse high electrical current driven solenoid

We describe a direct absolute magneto-optical approach to measuring the magnetic field driven by long pulse width (>5 ms) and high electrical current (∼kA) in a solenoidal coil. The magnetic field and electrical current are among the most important operating parameters in lightning research and electrical power distribution and are essential to understanding the properties of the radiation output in pulsed energy accelerators as well as other research platforms. However, accurately measuring these magnetic fields and electrical currents using conventional electrical diagnostics is difficult due to the strength of ionizing radiation and electromagnetic interference. Our approach uses a fiber coupled laser beam with a rare earth element material sensing crystal that is highly resistant to electromagnetic interference, allows for absolute measurement, and does not require an external calibration. Here, we focus on device theory, operating parameters, magneto-optical results from an experiment on a high current solenoid, and comparison with a calculation of the magnetic field and reference electrical current flowing downstream of the solenoid.

Owens, Israel [Sandia National Laboratories (SNL-N↗
DOE OSTI2025

Magnetized liner inertial fusion platform development to assess performance scaling with drive parameters

Magnetized liner inertial fusion (MagLIF) experiments have demonstrated fusion-relevant ion temperatures up to 3.1 keV and thermonuclear production of up to 1.1 × 1013 deuterium–deuterium neutrons. This performance was enabled through platform development that provided increases in applied magnetic field, coupled preheat energy, and drive current. Advanced coil designs with internal reinforcement enabled an increase from 10 to 20 T. An improved laser pulse shape, beam smoothing, and thinner laser entrance foils increased preheat energy coupling from less than 1 to 2.3 kJ. A redesign of the final transmission line and load region increased peak load current from 16 to 20 MA. The wider range of input parameters was leveraged to study target performance trends with preheat energy, applied magnetic field, and peak load current. Ion temperature and neutron yield generally followed trends in two-dimensional clean Lasnex calculations. Stagnation performance improved with peak load current when other input parameters were also increased such that convergence was maintained. This dataset suggests that reducing convergence to less than 30 would improve predictability of target performance. Lasnex was used to identify a simulation-optimized scaling path, which suggests 10+ kJ of fusion yield is possible on the Z facility with achievable input parameters. This path also indicates >10 MJ could be generated through volume burn on a future facility with a path to high yield (>200 MJ) using cryogenic dense fuel layers. The newly developed MagLIF platform enables exploration of both this simulation optimized scaling path and a recently developed similarity-scaling path.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Verification of the Shafranov shift in free-boundary VMEC, DESC, and SPEC calculations with elliptical geometry

Here, given a set of current-carrying filaments that create a magnetic field with rotating elliptical flux surfaces, we present verification calculations using the VMEC, DESC, and SPEC free-boundary magnetohydrostatic equilibrium codes for both the “vacuum” equilibrium, for which there is no plasma pressure and no plasma currents, and for a non-zero pressure, zero toroidal current equilibrium. For the vacuum case, these codes are quantitatively compared to the magnetic field produced by the coils. For the non-zero pressure case, they are compared to each other. As the stepped pressure profile used in SPEC approaches the continuous profile used in VMEC and DESC, the SPEC magnetic axis approaches the VMEC and DESC axes. To within an error given by the difference between the pressure profiles, the VMEC, DESC, and SPEC calculations give the same pressure-induced geometric shift of the magnetic axis, known as the Shafranov shift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Simulated thermonuclear performance of auto-magnetizing helical liner MagLIF target implosions

Magnetized liner inertial fusion (MagLIF) implosions on the Z accelerator require magnetization of the fuel to reduce thermal conduction losses of energy from the laser-preheated deuterium fusion fuel to the surrounding liner material. While external field coils traditionally used to axially magnetize MagLIF targets are limited to 10–20 T (or perhaps ∼ 30 T with technological development), calculations suggest that higher axial magnetic fields would improve thermal insulation of the fuel and improve MagLIF target performance. We present results from three-dimensional radiation-magnetohydrodynamic simulations of MagLIF implosions employing auto-magnetizing helical liners composed of discrete metallic helical conduction paths separated by electrically insulating material. These simulated auto-magnetizing (AutoMag) liners produce axial magnetic fields >30 T inside the fusion fuel prior to implosion. Simulations indicate that higher thermonuclear yields and burn-averaged fuel ion temperatures are attained for implosions using AutoMag liners compared to standard MagLIF implosions. Comparable implosion morphology is evident in synthetic x-ray images of AutoMag–MagLIF and standard MagLIF implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Integrated simulations of premagnetized and self-magnetizing dynamic screw pinch-driven MagLIF

Magnetically driven implosions such as in magnetized liner inertial fusion (MagLIF) on the Z accelerator suffer from magneto-Rayleigh–Taylor instabilities (MRTI) that dynamically redistribute liner mass during implosion, limiting fusion fuel compression and confinement, which ultimately degrades performance. Driving the implosion with an initially helical drive field that dynamically shifts the direction of the magnetic field surrounding the liner (i.e., a dynamic screw pinch, DSP) is a method proposed to mitigate MRTI in-flight and improve target performance. In DSPs, the axial drive magnetic field component implodes the liner and diffuses through the shocked, melted liner material into the fuel throughout the implosion. Liners can be designed to enable enough axial magnetic flux to diffuse through the liner material to effectively magnetize the fuel region without the need of an initial axial magnetic field (i.e., from external field coils). We present results from three-dimensional radiation-magnetohydrodynamic simulations of MagLIF implosions employing drive magnetic fields composed of axial and azimuthal components (a helical drive field). These simulated DSP-driven MagLIF targets demonstrate improved fuel conditions and thermonuclear yield compared to a traditional MagLIF target implosion. Synthetic x-ray radiography of the imploding liner material and x-ray emission images of the fuel region at the time of peak neutron yield rate indicate superior implosion morphology for DSP-MagLIF implosions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Direct evidence of the effect of a moderate external magnetic field on stimulated Raman scattering in the kinetic regime

We present results from an experiment carried out at the OMEGA-EP laser facility that investigated the effect of a perpendicular magnetic field on stimulated Raman scattering (SRS) and report the first direct measurement of magnetic mitigation of SRS. A 13-T magnetic field generated by pulsed-power coils was imposed on a gas jet plasma, and a novel three-picket interaction beam was used to explore SRS reflectivity for several plasma conditions within single shots. The time-resolved backscattered light shows that SRS was mitigated by the external 13-T magnetic field in the kinetic regime (kλ D ∼ 0.3, where k is the electron plasma wave's wavenumber and λ D is electron Debye length) and at a density of n e /n cr ∼ 0.10. On the other hand, we also measured an enhancement of SRS reflectivity at lower density (n e /n cr < 0.08). We discuss experimental results in the context of magnetohydrodynamic and particle-in-cell simulations that scan SRS dynamics for a variety of plasma conditions. While the experimental evidence of SRS mitigation validates prior work on the kinetic simulation of SRS in an external magnetic field, we also find that other mechanisms such as SRS rescatter can lead to an enhancement of measured SRS reflectivity in simulations of parameters relevant to our experiment.

Gas jet↗