Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMPOUND ENGINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Machine Learning Algorithm Identifies an Antibiotic Vocabulary for Permeating Gram-Negative Bacteria

Drug discovery faces a crisis. The industry has used up the “obvious” space in which to find novel drugs for biomedical applications, and productivity is declining. One strategy to combat this is rational approaches to expand the search space without relying on chemical intuition, to avoid rediscovery of similar spaces. Here, we present proof of concept of an approach to rationally identify a “chemical vocabulary” related to a specific drug activity of interest without employing known rules. We focus on the pressing concern of multidrug resistance in Pseudomonas aeruginosa by searching for submolecules that promote compound entry into this bacterium. By synergizing theory, computation, and experiment, we validate our approach, explain the molecular mechanism behind identified fragments promoting compound entry, and select candidate compounds from an external library that display good permeation ability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Kitaev physics in the two-dimensional magnet NiPSe 3

The Kitaev interaction, found in candidate materials such as α − RuCl 3 , occurs through the metal ( M )-ligand ( X )-metal ( M ) paths of the edge-sharing octahedra because the large spin-orbit coupling (SOC) on the metal atoms activates directional spin interactions. Here, we show that even in 3 d transition-metal compounds, where the SOC of the metal atom is negligible, heavy ligands can induce bond-dependent Kitaev interactions. In this work, we take as an example the 3 d transition-metal chalcogenophosphate NiPSe 3 and show that the key is found in the presence of a sizable SOC on the Se p orbital, one which mediates the super-exchange between the nearest-neighbor Ni sites. Our study provides a pathway for engineering enhanced Kitaev interactions through the interplay of SOC strength, lattice distortions, and chemical substitutions. Published by the American Physical Society 2024

36 MATERIALS SCIENCE↗
DOE OSTI2024

Switching it up: New mechanisms revealed in wurtzite-type ferroelectrics

Wurtzite-type ferroelectrics have drawn increasing attention due to the promise of better performance and integration than traditional oxide ferroelectrics with semiconductors such as Si, SiC, and III-V compounds. However, wurtzite-type ferroelectrics generally require enormous electric fields, approaching breakdown, to reverse their polarization. The underlying switching mechanism(s), especially for multinary compounds and alloys, remains elusive. Here, we examine the switching behaviors in Al 1-x Sc x N alloys and wurtzite-type multinary candidate compounds we recently computationally identified. We find that switching in these tetrahedrally coordinated materials proceeds via a variety of nonpolar intermediate structures and that switching barriers are dominated by the more-electronegative cations. For Al 1-x Sc x N alloys, we find that the switching pathway changes from a collective mechanism to a lower-barrier mechanism enabled by inversion of individual tetrahedra with increased Sc composition. Our findings provide insights for future engineering and realization of wurtzite-type materials and open a door to understanding domain motion.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Spacecraft Charging as an Asset to Interplanetary Small Spacecraft

Small spacecraft operate on a far more limited power budget than their larger counterparts, a problem compounded for interplanetary spacecraft in the outer solar system. The reduced solar flux beyond Earth’s orbit makes solar panels less effective for spacecraft exploring the gas giants and can they are susceptible to damage by intense radiation belts. Radioisotope thermoelectric generators are expensive and bulky compared to their power output. Interplanetary small satellite missions benefit from both alternative energy sources and low-power electronics to power their buses and scientific payloads. Traditionally, spacecraft engineers treat the space environment as a hazard, but it nevertheless offers a potential solution. Currents from space plasmas charge spacecraft to high potentials and can cause electrical arcing to occur between differentially charged surfaces. The spacecraft can harvest a small amount of power —<10 mW/m2at Jupiter — from the electric field between these surfaces to do useful work, either by charging a battery or directly powering an instrument or actuator. While using the energy directly has limited use due to the low electron density and temperature of most space plasmas, it can nevertheless be used in situations where solar panels are not desirable, such as high radiation environments. Two applications — a Langmuir probe and an attitude control actuator — exploit the disparate current-voltage characteristics between surfaces with different material properties and require minimal input power to operate.

Spacecraft↗
DOE OSTI2024

Development of an Optical Library for Coevaporated CdSe x Te 1– x

The conversion efficiency of CdTe solar cells may be improved by bandgap engineering, i.e., changing the bandgap value through the addition of Se in the absorber. The Se alloying enables a short-circuit current density improvement, as it leads to a bandgap energy value decrease. Furthermore, it has been associated with increased minority carrier lifetimes, assuring high open-circuit voltage values. An Se gradient profile control can further optimize the solar cell performance. Thus, an optical model baseline of the CdSe x Te 1–x (CST) compound was developed. Spectroscopic ellipsometry measurements were conducted to accurately extract the optical constants of ten CST layers deposited through coevaporation with x varying from 0 to 1. Using the measured dielectric function spectra from the discrete CST layers with varying x, and considering the composition-induced shift in the critical point energies, an energy-shift model was employed to develop the accurate optical library for the CST compound for any x value to provide data for future modeling and optimization. Furthermore, the library accuracy was validated through optical simulations of the quantum efficiency of a graded CST solar cell using the finite-difference time-domain method by replicating the Se profile in the absorber layer measured through secondary ion mass spectrometry.

14 SOLAR ENERGY↗
DOE OSTI2021

Control of Carbon Allocation in Phenylpropanoid Metabolism

Understanding the molecular mechanisms by which carbon flux is partitioned in plants, and how flux through the phenylpropanoid pathway in particular is regulated and allocated to different branches of the pathway is essential for the eventual rational manipulation of phenylpropanoid flux for bioenergy applications. The phenylpropanoid pathway is responsible for the biosynthesis of a diverse array of metabolites essential for structural integrity, water transport, UV protection, and defense against herbivores and pathogens. The products of the phenylpropanoid pathway, all of which are derived from phenylalanine, range from complex, insoluble polymers such as lignin and suberin, to soluble flavonoids and hydroxycinnamate esters, to volatile compounds used to attract pollinators. By far the most abundant of these is the complex heteropolymer lignin, which accounts for a significant portion of the dry weight of not only woody plants, but also of crop residues. Decreasing or altering lignin structure to provide increased cell wall digestibility could greatly increase the cost effectiveness of converting cell wall polysaccharides to ethanol or second-generation biofuels. On the other hand, it is also possible that plants engineered to accumulate higher levels of lignin could provide improved feedstock for direct combustion and electricity generation as part of a diverse bioenergy portfolio. Consistent with the enormous commitment of energy and carbon it requires, the synthesis of lignin is under tight regulatory control. In order to influence transcription, gene-specific activators and repressors must interact with basal transcription factors and the rest of the core transcriptional machinery. In eukaryotes, this interaction is bridged by the large, multi-subunit complex known as Mediator. Despite the clear importance of Mediator throughout the eukaryotes, the complex has only recently been studied in plants. We have shown that a pair of Mediator subunits, MED5a and MED5b are required for normal regulation of phenylpropanoid pathway product accumulation. Plants lacking these proteins show increased accumulation of phenylpropanoids in multiple tissues indicating that normally they directly or indirectly repress expression of phenylpropanoid pathway genes. Furthermore, we have recently shown that MED5 plays a role in dwarfing in some low lignin plants and feedback between and within metabolic pathways of secondary metabolism in Arabidopsis. Taken together with the established roles of Mediator in transcriptional regulation, and of MED5a and MED5b in the repression of phenylpropanoid metabolism, these observations suggest that MED5a and MED5b are key components of an active, transcriptional process by which phenylpropanoid homeostasis is maintained in wild-type plants. Our research focused on expanding our understanding of the role of Mediator, as well as elucidating the mechanisms by which these proteins influence phenylpropanoid biosynthesis and how metabolite accumulation within the pathway and between metabolic pathways is essential for feedback regulatory control. This research will inform future bioengineering efforts aimed at altering carbon allocation and cell wall engineering by contributing to our understanding of the role of Mediator in regulating lignin biosynthesis, a pathway of plant metabolism that is important on a global scale.

09 BIOMASS FUELS↗
DOE OSTI2026

Waste to worth: a circular solution through lignin engineering

The inefficient management of industrial waste threatens environmental sustainability, requiring scalable resource recovery solutions. To address these challenges, we propose a novel and sustainable in-situ one-step strategy for the simultaneous recovery and functionalization of lignin from industrial black liquor, using a sustainable organic acid system assisted by choline chloride. The functionalized lignin adsorbent material (FLAM) exhibited superior adsorption performance, effectively treating animal feedlot wastewater to recover ammonia. The ammonia enriched FLAM was subsequently repurposed as a slow-release fertilizer, enhancing plant growth and demonstrating a closed-loop pathway for waste valorization and nutrient recycling. Methylene blue was used as a model cationic compound to simulate the adsorption behavior and interactions. FLAM achieved a high adsorption capacity of 725.98 mg/g across a broad pH range, significantly outperforming commercial kraft lignin. This sustainable approach advances circular economy principles by integrating remediation and resource recovery, offering a scalable, eco-friendly solution for environmental applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Advanced Non-Tread Materials for Fuel-Efficient Tires

PPG Industries, Inc. proposes to develop a new silica filler that can increase fuel efficiency by 2% while maximizing key performance properties in non-tread tire components compared to current carbon black/silica filler blends. In this project PPG focused on a sidewall compound. The developed compounds/components will reduce energy losses by approximately 25%, with no more than a 5% loss of resistance to degradative forces (targeting better performance). PPG plans to achieve this goal by characterizing the impact the silica filler can have on rubber properties and then tuning the silica morphology and surface chemistry for this end use. PPG will also provide guidance in optimizing the compound formulation to make the best use of this new filler. A key aspect is to understand and maintain, if not improve, the aging performance as evaluated by crack growth resistance under ozone environment. Two key strategies were used to meet the rolling resistance goal while maintaining other performance properties. The first factor was understanding the surface treatments and chemical makeup of the silica and its effects on compound performance. The second factor was using the best performing silicas and determining the optimum compound modifications to achieve the final sidewall compound performance. Using statistical analysis throughout the optimization process, it was determined that changing the silica morphology played a role in improving the reduction of tear strength while reducing rolling resistance and the improvements observed varied depending on the CB type.

36 MATERIALS SCIENCE↗
NASA NTRS2000

Erosion Coatings for High-Temperature Polymer Composites: A Collaborative Project With Allison Advanced Development Company

The advantages of replacing metals in aircraft turbine engines with high-temperature polymer matrix composites (PMC's) include weight savings accompanied by strength improvements, reduced part count, and lower manufacturing costs. Successfully integrating high-temperature PMC's into turbine engines requires several long-term characteristics. Resistance to surface erosion is one rarely reported property of PMC's in engine applications because PMC's are generally softer than metals and their erosion resistance suffers. Airflow rates in stationary turbine engine components typically exceed 2.3 kg/sec at elevated temperatures and pressures. In engine applications, as shown in the following photos, the survivability of PMC components is clearly a concern, especially when engine and component life-cycle requirements become longer. Although very few publications regarding the performance of erosion coatings on PMC's are available particularly in high-temperature applications the use of erosion-resistant coatings to significantly reduce wear on metallic substrates is well documented. In this study initiated by the NASA Glenn Research Center at Lewis Field, a low-cost (less than $140/kg) graphite-fiber-reinforced T650 35/PMR 15 sheet-molding compound was investigated with various coatings. This sheet-molding compound has been compression molded into many structurally complicated components, such as shrouds for gas turbine inlet housings and gearboxes. Erosion coatings developed for PMC s in this study consisted of a two-layered system: a bondcoat sprayed onto a cleaned PMC surface, followed by an erosion-resistant, hard topcoat sprayed onto the bondcoat as shown in following photomicrograph. Six erosion coating systems were evaluated for their ability to withstand harsh thermal cycles, erosion resistance (ASTM G76 83 "Standard Practice for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets") using Al2O3, and adhesion to the graphite fiber polyimide composite (ASTM D 4541 95 "Pull Off Strength of Coatings"). Glenn and Allison Advanced Development Company collaborated to optimize erosion coatings for gas turbine fan and compressor applications. All the coating systems survived aggressive thermal cycling without spalling. During erosion tests (see the final photo), the most promising coating systems tested had Cr3C2-NiCr and WC-Co as the hard topcoats. In all cases, these coating systems performed significantly better than that with a TiN hard topcoat. When material depth (thickness) loss is considered, the Cr3C2-NiCr and WC-Co coating systems provided, on average, an erosion resistance 8.5 times greater than that for the uncoated PMR 15/T650 35 composite. Similarly, Cr3C2-NiCr and WC-Co coating systems adhered to the PMC substrate during tensile tests significantly better than systems containing a TiN topcoat. Differences in topcoats of Cr3C2-NiCr and WC-Co were determined by considering issues such as cost and environmental impact. The preferred erosion-resistant coating system for PMR 15/T650 35 has WC-Co as the hard topcoat. This system provides the following benefits in comparison to the coating system with Cr3C2-NiCr topcoat: lower powder material cost (15 to 20 percent), environmentally friendly materials (Cr3C2-NiCr is hazardous), and higher deposition yield (10 to 15 percent), which results in less waste.

Sutter, James K.↗
NASA NTRS1998

Low-Cost Production of Composite Bushings for Jet Engine Applications

The objectives of this research program were to reduce the manufacturing costs of variable stator vane bushings by 1) eliminating the expensive carbon fiber braiding operation, 2) replacing the batch mode impregnation, B-stage, and cutting operations with a continuous process, and 3) reducing the molding cycle and machining operations with injection molding to achieve near-net shapes. Braided bushings were successfully fabricated with both AMB-17XLD and AMB-TPD resin systems. The composite bushings achieved high glass transition temperature after post-cure (+300 C) and comparable weight loss to the PNM-15 bushings. ANM-17XLD bushings made with "batch-mode" molding compound (at 0.5 in. fiber length) achieved a +300 lb-force flange break strength which was superior to the continuous braided-fiber reinforced bushing. The non-MDA resin technology developed in this contract appears attractive for bushing applications that do not exceed a 300 C use temperature. Two thermoplastic polyimide resins were synthesized in order to generate injection molding compound powders. Excellent processing results were obtained at injection temperatures in excess of 300 C. Micro-tensile specimens were produced from each resin type and the Tg measurements (by TMA) for these samples were equivalent to AURUM(R). Thermal Gravimetric Analysis (TGA) conducted at 10 C/min showed that the non-MDA AMB-type polyimide thermoplastics had comparable weight loss to PMR-15 up to 500 C.

Gray, Robert A.↗
DOE OSTI2020

Synthesis of Ionic Ultramicroporous Polymers for Selective Separation of Acetylene from Ethylene

The design of highly stable and efficient porous materials is essential for developing breakthrough hydrocarbon separation methods based on physisorption to replace currently used energy-intensive distillation/absorption technologies. Efforts to develop advanced porous materials such as zeolites, coordination frameworks, and organic polymers have met with limited success. Here, a new class of ionic ultramicroporous polymers (IUPs) with high-density inorganic anions and narrowly distributed ultramicroporosity is reported, which are synthesized by a facile free-radical polymerization using branched and amphiphilic ionic compounds as reactive monomers. A covalent and ionic dual-crosslinking strategy is proposed to manipulate the pore structure of amorphous polymers at the ultramicroporous scale. The IUPs exhibit exceptional selectivity (286.1–474.4) for separating acetylene from ethylene along with high thermal and water stability, collaboratively demonstrated by gas adsorption isotherms and experimental breakthrough curves. Modeling studies unveil the specific binding sites for acetylene capture as well as the interconnected ultramicroporosity for size sieving. Finally, the porosity-engineering protocol used in this work can also be extended to the design of other ultramicroporous materials for the challenging separation of other key gas constituents.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Chemical heterogeneity modulated zero thermal expansion alloy over super-wide temperature range

Chemical heterogeneity is usually avoided in solution chemistry, but it may still occur with sometimes dramatic effects on target materials and their properties. Here, we propose chemical heterogeneity as a counterintuitive strategy to design high-performance zero thermal expansion (ZTE) alloys. We apply this approach in a Hf-Ti-Fe alloy with excess Fe in the Hf/Ti sublattice and produce Hf/Ti concentration alternations at the micro level. Such chemical heterogeneity regulates local magnetic interactions in alloy and triggers a dispersed magnetic phase transition that modulates the thermal expansions at the micro level and hence results in a remarkable ZTE behavior over a super-wide temperature window from 10 to 480 K. This mechanism is supported by comprehensive studies on morphological microstructures, crystal and magnetic structures, and theoretical calculations. The strategy of local chemical heterogeneity opens up an avenue to design ZTE and the related functional materials directly via microstructure engineering.

36 MATERIALS SCIENCE↗
NASA NTRS1982

Ceramic thermal barrier coatings for gas turbine engines

The results of studies concerning the high temperature corrosion resistance of ZrO2-Y2O3, ZrO2-MgO, and Ca2SiO4 plasma-sprayed coatings, which may be used as gas turbine engine thermal barriers, are reported. The coatings were evaluated in atmospheric burner rig and pressurized passage tests, using GT No. 2 fuel in pure form and with sodium, sulfur and vanadium corrosive impurities doping. It is found that, while the coatings performed well in both pressurized passage and burner rig tests with pure fuel chemical reactions between the ceramic coatings and combustion gases/condensates resulted in coating degradation with impure fuels. Chemical reactions between the ceramic coatings and vanadium compounds played a critical role in coating degradation.

Bratton, R. J.↗
NASA NTRS2003

Liquid Coatings for Reducing Corrosion of Steel in Concrete

Inorganic coating materials are being developed to slow or stop corrosion of reinforcing steel members inside concrete structures. It is much simpler and easier to use these coating materials than it is to use conventional corrosion-inhibiting systems based on impressed electric currents. Unlike impressed electrical corrosion-inhibiting systems, these coatings do not require continuous consumption of electrical power and maintenance of power-supply equipment. Whereas some conventional systems involve the use of expensive arc-spray equipment to apply the metallic zinc used as the sacrificial anode material, the developmental coatings can be applied by use of ordinary paint sprayers. A coating material of the type under development is formulated as a liquid containing blended metallic particles and/or moisture-attracting compounds. The liquid mixture is sprayed onto a concrete structure. Experiments have shown that even though such a coat resides on the exterior surface, it generates a protective galvanic current that flows to the interior reinforcing steel members. By effectively transferring the corrosion process from the steel reinforcement to the exterior coating, the protective current slows or stops corrosion of the embedded steel. Specific formulations have been found to meet depolarization criteria of the National Association of Corrosion Engineers (NACE) for complete protection of steel reinforcing bars ("rebar") embedded in concrete.

MacDowell, Louis G.↗
NASA NTRS2023

Bacillus Subtilis Engineered for Aerospace Medicine: A Platform for Off-Planet Production of Pharmaceutical Peptides

Biologics, such as pharmaceutical peptides, have notoriously short shelf lives, insufficient for long-duration space flight missions to the Moon or Mars. To enable the sustainable presence of humans on the Moon or Mars, we must develop methods for on-site production of pharmaceutical peptides in space, a concept we call the Astropharmacy. Here, we present a proof-of-concept for the first step needed: a low-mass system for pharmaceutical production designed to be stable in space. To demonstrate feasibility, we engineered strains of the space-hardy spore-forming bacterium, Bacillus subtilis, to secrete two pharmaceutical peptides important for astronaut health: teriparatide (an anabolic agent for combating osteoporosis) and filgrastim (an effective countermeasure for radiation-induced neutropenia). We found that the secretion peptides from the walM and yoqH genes of B. subtilis worked well for secreting teriparatide and filgrastim, respectively. In consideration of the Translational Research Institute for Space Health (TRISH) challenge to produce a dose equivalent in 24 h, dried spores of our engineered strains were used to produce 1 dose equivalent of teriparatide from a 2 mL culture and 1 dose equivalent of filgrastim from 52 mL of culture in 24 h. Further optimization of strain growth conditions, expression conditions, and promoter sequences should allow for higher production rates to be achieved. These strains provide the template for future optimization efforts and address the first step in the Astropharmacy, capable of on-site production, purification, and processing of biopharmaceutical compounds in platforms amenable for use in space.

Alec Vallota-Eastman↗
DOE OSTI2020

Crystal Structure Prediction of Binary Alloys via Deep Potential

Predicting crystal structure has been a challenging problem in physics and materials science for a long time. A reliable energy calculation engine combined with an efficient global search algorithm, such as particle swarm optimization algorithm or genetic algorithm, is needed to conduct crystal structure prediction. In recent years, machine learning-based interatomic potential energy surface models have been proposed, potentially allowing us to perform crystal structure prediction for systems with the accuracy of density functional theory (DFT) and the speed of empirical force fields. In this paper, we employ a previously developed Deep Potential model to predict the intermetallic compound of the aluminum–magnesium system, and find six meta-stable phases with negative or nearly zero formation energy. In particular, Mg 12 Al 8 shows excellent ductility and Mg 5 Al 27 has a high Young's modulus. Based on our benchmark results, we propose a relatively robust structure screening criterion that selects potentially stable structures from the Deep Potential-based convex hull and performs DFT refinement. By using this criterion, the computational cost needed to construct the convex hull with ab initio accuracy can be dramatically reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1994

Exobiology opportunities from Discovery-class missions

Discovery-class missions that are now planned, and those in the concept stage, have the potential to expand our knowledge of the origins and evolution of biogenic compounds, and ultimately, of the origins of life in the solar system. This class of missions, recently developed within NASA's Solar System Exploration Program, is designed to meet important scientific objectives within stringent guidelines--$150 million cap on development cost and a 3-year cap on the development schedule. The Discovery Program will effectively enable "faster, cheaper" missions to explore the inner solar system. The first two missions are Mars Environmental Survey (MESUR) Pathfinder and Near Earth Asteroid Rendezvous (NEAR). MESUR Pathfinder will be the first Discovery mission, with launch planned for November/December 1996. It will be primarily a technical demonstration and validation of the MESUR Program--a network of automated landers to study the internal structure, meteorology, and surface properties of Mars. Besides providing engineering data, Pathfinder will carry atmospheric instrumentation and imaging capabilities, and may deploy a microrover equipped with an alpha proton X-ray spectrometer to determine elemental composition, particularly the lighter elements of exobiological interest. NEAR is expected to be launched in 1998 and to rendezvous with a near-Earth asteroid for up to 1 year. During this time, the spacecraft will assess the asteroid's mass, size, density, map its surface topography and composition, determine its internal properties, and study its interaction with the interplanetary environment. A gamma ray or X-ray spectrometer will be used to determine elemental composition. An imaging spectrograph, with 0.35 to 2.5 micron spectral range, will be used to determine the asteroid's compositional disbribution. Of the 11 Discovery mission concepts that have been designated as warranting further study, several are promising in terms of determining the composition and chemical evolution of organic matter on small planetary bodies. The following mission concepts are of particular interest to the Exobiology Program: Cometary coma chemical composition, comet nucleus tour, near earth asteroid returned sample, small missions to asteroids and comets, and solar wind sample return. The following three Discovery mission concepts that have been targeted for further consideration are relevant to the study of the evolution of biogenic compounds: Comet nucleus penetrator, mainbelt asteroid rendezvous explorer, and the Mars polar Pathfinder.

Meyer, Michael A.↗
DOE OSTI2020

Superlattices are Greener on the Other Side: How Light Transforms Self-Assembled Mixed Halide Perovskite Nanocrystals

Perovskite nanocrystal superlattices (NC SLs) are the nearest real-world approximations to monodisperse NC ensembles. NC SLs thus represent ideal model systems for evaluating the optical and structural stability of CsPb(I 1– x Br x ) 3 NCs at a macroscopic level. Here, photoinduced changes to CsPb(I 1– x Br x ) 3 NC SLs (0 < x < 1.0) are probed via in situ photoluminescence, X-ray diffraction, and electron microscopy. We find that prolonged (~10–20 h) ultraviolet–visible irradiation causes irreversible PL blueshifts, photobrightening, and crystal structure contractions. These changes stem from gradual photoinduced I 2 sublimation, which transforms CsPb(I 1– x Br x ) 3 into CsPbBr 3 . Despite eliminating half of the initial halides from individual CsPb(I 0.53 Br 0.47 ) 3 particles, NCs within SLs remarkably preserve their initial crystallinity, cuboidal shapes, edge lengths, and size distributions. This work illustrates compositional control toward generating precisely engineered perovskite NC SLs. It also highlights iodide photo-oxidation as a hurdle that must be overcome if mixed halide perovskite nanomaterials are to be applied beyond fundamental studies.

36 MATERIALS SCIENCE↗