Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CMB”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Assessment of Models of Galactic Thermal Dust Emission Using COBE/FIRAS and COBE/DIRBE Observations

Accurate modeling of the spectrum of thermal dust emission at millimeter wavelengths is important for improving the accuracy of foreground subtraction for cosmic microwave background (CMB) measurements, for improving the accuracy with which the contributions of different foreground emission components can be determined, and for improving our understanding of dust composition and dust physics. We fit four models of dust emission to high Galactic latitude COBE/FIRAS and COBE/DIRBE observations from 3 mm to 100m and compare the quality of the fits. We consider the two-level systems (TLS) model because it provides a physically motivated explanation for the observed long wavelength flattening of the dust spectrum and the anti-correlation between emissivity index and dust temperature. We consider the model of Finkbeiner et al. because it has been widely used for CMB studies, and the generalized version of this model that was recently applied to Planck data by Meisner and Finkbeiner. For comparison we have also fit a phenomenological model consisting of the sum of two-graybody components. We find that the two-graybody model gives the best fit and the FDS model gives a significantly poorer fit than the othermodels. The Meisner and Finkbeiner model and the TLS model remain viable for use in Galactic foreground subtraction, but the FIRAS data do not have a sufficient signal-to-noise ratio to provide a strong test of the predicted spectrum at millimeter wavelengths.

Odegard, N.↗

The Coldest Object in the Universe: Probing the Mass Distribution of the Ultra-Cold Outflow and Dusty Disk in the Boomerang Nebula

Our Cycle 0 ALMA observations confirmed that the Boomerang Nebula is the coldest known object in the universe, with a massive high-speed outflow that has cooled significantly below the temperature of the cosmic background (CMB). The Boomerang's prodigious mass-loss rate (0.001 solar mass M yr (exp -1) and low-luminosity (300L ) make it a key object for understanding the remarkable transition of the circumstellar envelopes of AGB stars into bipolar planetary nebulae. We have obtained new ACA CO 1-0 data that recover much of the flux lost in the Cycle O data, and reveal heretofore unseen distant regions of the ultra-cold outflow reheated to temperatures above the CMB. Our CO J=3-2 data reveal the precise, highly collimated shape of an inner bipolar structure and its dense central waist, with unprecedented angular resolution (0.4 in). The waist shows a core-halo structure in the thermal dust emission at 0.88 millimeter, and its derived flux at this wavelength, compared with the 3.3, 2.6, and 1.3 millimeter fluxes support the presence of about 5 x 10 (exp -4) solar mass of very large (approximately millimeter-sized), cold (approximately 30K) grains. We also find the unexpected presence of weak SO emission, possibly resulting from the release of S from grains due to high-speed shocks.

Sahai, R.↗

Systematic Error Cancellation for the PIXIE Four-Port Interferometric Polarimeter

The Primordial Inflation Explorer (PIXIE) is an Explorer-class mission concept to measure the gravitational-wavesignature of primordial inflation through its distinctive imprint on the linear polarization of the cosmic microwavebackground. Its optical system couples a polarizing Fourier transform spectrometer to the sky to measure thedifferential signal between orthogonal linear polarization states from two co-pointed beams on the sky. Thedouble differential nature of the four-port measurement mitigates beam-related systematic errors common to thetwo-port systems used in most CMB measurements. We describe the polarized beam patterns for PIXIE andassess the systematic error for measurements of CMB polarization.

Kogut, Alan↗

The Effects of CDKN1a/p21 on Oxidative Stress and Mitochondrial Function During Long Duration Spaceflight

Spaceflight factors, such as microgravity and space radiation, are known to put astronauts at risk for negative effects to their tissue regeneration and degenerative conditions. On our previous spaceflight research, we found that long duration spaceflight produced increased oxidative stress and activation of the inflammatory response as a major contributor to physiological changes, including alterations to the cardiovascular and musculoskeletal systems, metabolism, and the liver. Proliferation, apoptosis, and ion-channel remodeling of vascular smooth muscle cells, as well as endothelial inflammation, and nitric oxide synthase-nitric oxide system regulation have been shown by spaceflight and simulated spaceflight projects. CDKN1ap21 is a regulatory gene for tissue regeneration and also plays an important role in upregulating oxidative stress caused by radiation. In further research, we have also determined CDKN1ap21 to be overexpressed during spaceflight. When knocked out in mice, however, it protects against unloading-induced changes to the morphology and physiology of carotid arteries. In this proposal, we seek to test a potential dietary countermeasure to down-regulate CDKN1ap21 in the mice and protect against oxidative stress in the rodents. Specifically, we will expose both Wildtype and CDKN1ap21-null mice to hydrogen peroxide to induce oxidative stress and observe the molecular mechanisms in which a dietary supplement protects vascular smooth muscle cells against the consequences of the apoptotic environment within Wildtype mice versus the, hypothetically, sound physiology of CDKN1ap21-null mice. The successful completion of this experiment will conclusively determine accuracy of a dietary supplement as a CDKN1ap21 suppressor. This will provide a new perspective on the problem of increased oxidative stress developing into cardiovascular disease as a result of long-term space flight. This research will address the Human Research Plan Roadmaps Risk of Cardiac Rhythm Problems including CV-8, the Risk of Cardiovascular Disease and Other Degenerative Tissue Effects from Radiation Exposure including Degen-6 and Degen-7, and the Risk of Adverse Health Event from Radiation Exposure including IM-8. Additionally, this research will address Space Biology Research Plans questions SBP CMB-1, SBP CMB-3, and SB AN-2.

Oxidative Stress↗

Extended X-ray emission from the z=4.26 radio galaxy 4C 63.20

We report on deep Chandra X-ray Telescope imaging observations of 4C 63.20, one of the few known radio galaxies at z > 3.5.The X-ray counterpart is resolved into a core plus two off-nuclear sources that (combined) account for close to 30 per cent of the total X-ray flux. Their morphology and orientation are consistent with a diffuse, lobe-like nature, albeit compact hotspots cannot be ruled out. The broad-band spectral energy distribution of 4C 63.20 can be reproduced with a jet model where the majority of the radio flux can be ascribed to synchrotron emission from the hotspots, whereas the (non-nuclear) X-ray emission is produced via inverse Compton (IC) off of cosmic microwave background (CMB) photons within the extended lobes. This scenario is broadly consistent with the expectation from highly magnetized lobes in a hotter CMB, and supports the view that IC/CMB may quench less extreme radio lobes at high redshifts.

Kate Napier↗

Comparing complex impedance and bias step measurements of Simons Observatory transition edge sensors

The Simons Observatory (SO) will perform ground-based observations of the cosmic microwave background (CMB) with several small and large aperture telescopes, each outfitted with thousands to tens of thousands of superconducting aluminum manganese (AlMn) transition-edge sensor bolometers (TESs). In-situ characterization of TES responsivities and effective time constants will be required multiple times each observing-day for calibrating time-streams during CMB map-making. Effective time constants are typically estimated in the field by briefly applying small amplitude square-waves on top of the TES DC biases, and fitting exponential decays in the bolometer response. These so-called “bias step” measurements can be rapidly implemented across entire arrays and therefore are attractive because they take up little observing time. However, individual detector complex impedance measurements, while too slow to implement during observations, can provide a fuller picture of the TES model and a better understanding of its temporal response. Here, we present the results of dark TES characterization of many prototype SO bolometers and compare the effective thermal time constants measured via bias steps to those derived from complex impedance data.

Nicholas F. Cothard↗

Design and Results of Differential Microwave Radiometers (DMR) on COBE

The Differential Microwave Radiometer (DMR) experiment on the Cosmic Background Explorer is in the final year of a scheduled four years of operation to measure large- and intermediate-scale anisotropies in the Cosmic Microwave Background (CMB). The DMR instrument comprises two independent radiometers at each of three frequencies, 31.5 53, and 90 GHz, where the frequencies were chosen to best separate the CMB from the foreground emissions from galactic dust and electrons...

Kogut, Alan J.↗

A broadband superconducting detector suitable for use in large arrays

Cryogenic detectors are extremely sensitive and have a wide variety of applications (particularly in astronomy), but are difficult to integrate into large arrays like a modern CCD (charge-coupled device) camera. As current detectors of the cosmic microwave background (CMB) already have sensitivities comparable to the noise arising from the random arrival of CMB photons, the further gains in sensitivity needed to probe the very early Universe will have to arise from large arrays. A similar situation is encountered at other wavelengths.

Crogenic↗

In Situ Performance of the Low Frequency Array for Advanced ACTPol

The Advanced Atacama Cosmology Telescope Polarimeter (AdvACT) is an upgrade for the Atacama Cosmology Telescope using Transition Edge Sensor (TES) detector arrays to measure cosmic microwave background (CMB) temperature and polarization anisotropies in multiple frequencies. The low frequency (LF) array was deployed early 2020. It consists of 292 TES bolometers observing in two bands centered at 27 GHz and 39 GHz. At these frequencies, it is sensitive to synchrotron radiation from our galaxy as well as to the CMB, and complements the AdvACT arrays operating at 90, 150 and 230 GHz. We present the initial LF array on-site characterization, including the time constant, optical efficiency and array sensitivity.

Superconducting detectors↗

The Simons Observatory Microwave SQUID Multiplexing Detector Module Design

Advances in cosmic microwave background(CMB)science depend on increasing the number of sensitive detectorsobserving the sky. New instruments deploy large arrays of superconducting transition-edge sensor(TES)bolometers tileddensely into ever larger focal planes. High multiplexing factors reduce the thermal loading on the cryogenic receivers andsimplify their design. We present the design of focal-plane modules with an order of magnitude higher multiplexingfactor than has previously been achieved with TES bolometers. We focus on the novel cold readout component, whichemploys microwave SQUID multiplexing(μmux). Simons Observatory will use 49 modules containing 70,000bolometers to make exquisitely sensitive measurements of the CMB. We validate the focal-plane module design,presenting measurements of the readout component with and without a prototype detector array of 1728 polarization-sensitive bolometers coupled to feedhorns. The readout component achieves a 95% yield and a 910 multiplexing factor.The median white noise of each readout channel is 65pA Hz. This impacts the projected SO mapping speed by<8%,which is less than is assumed in the sensitivity projections. The results validate the full functionality of the module. Wediscuss the measured performance in the context of SO science requirements, which are exceeded.

Heather McCarrick↗

Tensor-to-scalar ratio forecasts for extended LiteBIRD frequency configurations

LiteBIRD is a planned JAXA-led cosmic microwave background (CMB) B -mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, δr , down to δr < 0.001. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust spectral energy distribution, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compared the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the High-Frequency Telescope (HFT) frequency range was shifted logarithmically toward higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measured the tensor-to-scalar ratio r uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on r after foreground cleaning may be reduced by as much as 30–50% by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to higher residuals when fitting an incorrect dust model, but also it is easier to discriminate between models through higher χ 2 sensitivity. Even in the case in which the fitting procedure does not correspond to the underlying dust model in the sky, and when the highest frequency data cannot be modeled with sufficient fidelity and must be excluded from the analysis, the uncertainty on r increases by only about 5% for a 500 GHz configuration compared to the baseline.

U. Fuskeland↗

The Atacama Cosmology Telescope: Map-Based Noise Simulations for DR6

The increasing statistical power of cosmic microwave background (CMB) datasets requires a commensurate effort in understanding their noise properties. The noise in maps from ground-based instruments is dominated by large-scale correlations, which poses a modeling challenge. This paper develops novel models of the complex noise covariance structure in the Atacama Cosmology Telescope Data Release 6 (ACT DR6) maps. We first enumerate the noise properties that arise from the combination of the atmosphere and the ACT scan strategy. We then prescribe a class of Gaussian, map-based noise models, including a new wavelet-based approach that uses directional wavelet kernels for modeling correlated instrumental noise. The models are empirical, whose only inputs are a small number of independent realizations of the same region of sky. We evaluate the performance of these models against the ACT DR6 data by drawing ensembles of noise realizations. Applying these simulations to the ACT DR6 power spectrum pipeline reveals a ≥ 20% excess in the covariance matrix diagonal when compared to an analytic expression that assumes noise properties are uniquely described by their power spectrum. Along with our public code, mnms, this work establishes a necessary element in the science pipelines of both ACT DR6 and future ground-based CMB experiments such as the Simons Observatory (SO).

CMBR experiments↗

Sidelobe Modeling and Mitigation for A Three Mirror Anastigmat Cosmic Microwave Background Telescope

Telescopes measuring cosmic microwave background (CMB) polarization on large angular scales require exquisite control of systematic errors to ensure the fidelity of the cosmological results. In particular, far-sidelobe contamination from wide angle scattering is a potentially prominent source of systematic error for large aperture microwave telescopes. Here we describe and demonstrate a ray-tracing-based modeling technique to predict far sidelobes for a three mirror anastigmat telescope designed to observe the CMB from the South Pole. Those sidelobes are produced by light scattered in the receiver optics subsequently interacting with the walls of the surrounding telescope enclosure. After comparing simulated sidelobe maps and angular power spectra for different enclosure wall treatments, we propose a highly scattering surface that would provide more than an order of magnitude reduction in the degree-scale far-sidelobe contrast compared to a typical reflective surface. We conclude by discussing the fabrication of a prototype scattering wall panel and presenting measurements of its angular scattering profile.

Ian Gullett↗

Masses of Sunyaev-Zel’dovich Galaxy Clusters Detected by the Atacama Cosmology Telescope: Stacked Lensing Measurements with Subaru HSC Year 3 Data

We present a stacked lensing analysis of 96 galaxy clusters selected by the thermal Sunyaev-Zel’dovich (SZ) effect in maps of the cosmic microwave background (CMB). We select foreground galaxy clusters with a 5σ-level SZ threshold in CMB observations from the Atacama Cosmology Telescope, while we define background source galaxies for the lensing analysis with secure photometric redshift cuts in Year 3 data of the Subaru Hyper Suprime Cam survey. We detect the stacked lensing signal in the range of 0.1 < R[h −1 Mpc] < 100 in each of three cluster redshift bins, 0.092 < z ≤ 0.445, 0.445 < z ≤ 0.695, and 0.695 < z ≤ 1.180, with 32 galaxy clusters in each bin. The cumulative signal-to-noise ratios of the lensing signal are 14.6, 12.0, and 6.6, respectively. Using a halo-based forward model, we then constrain statistical relationships between the mass inferred from the SZ observation (i.e. SZ mass) and the total mass derived from our stacked lensing measurements. At the average SZ mass in the cluster sample (2.1 − 2.4 × 10 14 h −1 M⊙), our likelihood analysis shows that the average total mass differs from the SZ counterpart by a factor of 1.3 ± 0.2, 1.6 ± 0.2, and 1.6 ± 0.3 (68%) in the aforementioned redshift ranges, respectively. Our limits are consistent with previous lensing measurements, and we find that the cluster modeling choices can introduce a 1σ-level difference in our parameter inferences.

Masato Shirasaki↗

The Canadian Galactic Emission Mapper: A New 8-10 GHz Telescope To Map the Polarization of the Northern Sky

The Canadian Galactic Emission Mapper (CGEM) radio telescope is mapping polarized Galactic foregrounds from 8-10 GHz to aid in the search for B-modes in the Cosmic Microwave Background (CMB). Here we describe the design and early on-sky characterization of the CGEM optics. CGEM employs an on-axis, hat feed optical design that is a body of revolution (BOR) and exhibits excellent intrinsic polarization purity. We describe how we have optimized the optics with a novel framework that can directly minimize simulated intensity to polarized intensity (T → P) leakage in angular power spectrum space. The optimized optics exhibit simulated T → P leakage that is orders of magnitude below anticipated CℓBB for r = 10 −3 when scaled from 8-10 GHz to the CMB observing window near 95 GHz. We go on to describe the mechanical design of the optics, including a novel secondary mirror support made from Astroquartz composite that has low loss, low dielectric constant, and preserves the BOR symmetry of the optics. We then showcase the early on-sky performance of the optics with observations of the Sun and satellites, which probe the beam to 40dB down from the peak. A beam model for the deployed CGEM optics based on electromagnetic simulations is in excellent agreement with the on-sky data.

cosmic microwave background↗

DESI DR1 Ly$α$ forest: 3D full-shape analysis and cosmological constraints

We perform an analysis of the full shapes of Lyman-$α$ (Ly$α$) forest correlation functions measured from the first data release (DR1) of the Dark Energy Spectroscopic Instrument (DESI). Our analysis focuses on measuring the Alcock-Paczynski (AP) effect and the cosmic growth rate times the amplitude of matter fluctuations in spheres of $8$$h^{-1}\text{Mpc}$, $fσ_8$. We validate our measurements using two different sets of mocks, a series of data splits, and a large set of analysis variations, which were first performed blinded. Our analysis constrains the ratio $D_M/D_H(z_\mathrm{eff})=4.525\pm0.071$, where $D_H=c/H(z)$ is the Hubble distance, $D_M$ is the transverse comoving distance, and the effective redshift is $z_\mathrm{eff}=2.33$. This is a factor of $2.4$ tighter than the Baryon Acoustic Oscillation (BAO) constraint from the same data. When combining with Ly$α$ BAO constraints from DESI DR2, we obtain the ratios $D_H(z_\mathrm{eff})/r_d=8.646\pm0.077$ and $D_M(z_\mathrm{eff})/r_d=38.90\pm0.38$, where $r_d$ is the sound horizon at the drag epoch. We also measure $fσ_8(z_\mathrm{eff}) = 0.37\; ^{+0.055}_{-0.065} \,(\mathrm{stat})\, \pm 0.033 \,(\mathrm{sys})$, but we do not use it for cosmological inference due to difficulties in its validation with mocks. In $Λ$CDM, our measurements are consistent with both cosmic microwave background (CMB) and galaxy clustering constraints. Using a nucleosynthesis prior but no CMB anisotropy information, we measure the Hubble constant to be $H_0 = 68.3\pm 1.6\;\,{\rm km\,s^{-1}\,Mpc^{-1}}$ within $Λ$CDM. Finally, we show that Ly$α$ forest AP measurements can help improve constraints on the dark energy equation of state, and are expected to play an important role in upcoming DESI analyses.

Cuceu, Andrei [LBL, Berkeley; Chicago U., KICP] (O↗

Measurement of the galaxy-velocity power spectrum of DESI tracers with the kinematic Sunyaev-Zeldovich effect using DESI DR2 and ACT DR6

Joint analyses of high-resolution CMB temperature maps with galaxy surveys provide a unique way to reconstruct the radial velocity field of the underlying matter distribution via the kinematic Sunyaev-Zeldovich (kSZ) effect. Using data from the Atacama Cosmology Telescope (ACT) DR6 and the Dark Energy Spectroscopic Instrument (DESI) DR2, we present radial velocity reconstructions for luminous red galaxies (LRGs), emission-line galaxies (ELGs), and quasars (QSOs). Leveraging the spectroscopic data, we are able to reliably model the foreground contamination and report a negligible impact on our main observables. We detect the velocity-galaxy cross-correlation at $17.0σ$ for LRGs, and for the first time, at $8.3σ$ for ELGs and $6.8σ$ for QSOs. We further report the first detection of the velocity-velocity correlation using LRGs at $3.1σ$, as well as the highest cumulative detection of the kSZ effect to date at $20.8 σ$. Similarly to previous results, we find a lower amplitude of the kSZ signal compared to our fiducial halo model prediction and electron profile assuming a Battaglia profile. Combining these new observables, we obtain constraints on local-type primordial non-Gaussianity (PNG): $f_{\rm NL}^{\rm loc} = 15.9_{-34.4}^{+34.6}$ at 68% confidence, which represents the tightest constraint to date derived from the velocity field. The measurements presented here already exhibit lower noise on a per-mode basis than the galaxy auto-correlation on the largest scales, $k<0.004~\rm{Mpc^{-1}}$, highlighting the key role these observables will play in the context of future CMB experiments such as the Simons Observatory.

Chaussidon, Edmond [LBL, Berkeley] (ORCID:00000001↗

Constraints on Dynamical Dark Energy from Multiple Probes in the Full Dark Energy Survey

We present results on dark energy evolution, assuming a time-dependent equation of state $w(a)=w_0+w_a(1-a)$, from growth and geometric probes using the full six-year Dark Energy Survey dataset: type Ia supernovae, baryon acoustic oscillations, and weak gravitational lensing and galaxy clustering (3$\times$2pt). The combination yields $w_0=-0.84^{+0.10}_{-0.10}$ and $w_a=-0.44^{+0.60}_{-0.55}$, the tightest constraints ever obtained from a single survey, with $2.2σ$ deviation from a cosmological constant. Adding the DESI DR2 BAO data yields $w_0=-0.84^{+0.06}_{-0.07}$ and $w_a=-0.53^{+0.33}_{-0.28}$, representing the most stringent low-redshift-only test of dynamical dark energy to date, with a $2.3σ$ deviation. In this combination, adding 3$\times$2pt doubles the constraining power. Finally, when combined with primary CMB information, we obtain $w_0=-0.82^{+0.05}_{-0.05}$, $w_a=-0.63^{+0.21}_{-0.18}$, with a $3.0σ$ deviation. We find that including 3$\times$2pt in the previously studied SN + DESI BAO + CMB combination leaves the significance essentially unchanged ($3.2 σ$ to $3.0σ$) while improving the figure of merit by $\sim$10%. We systematically investigate the impact of leaving out each one of the probes and find that the significance of the deviation from a cosmological constant ranges from 2.3 to 3.2$σ$, with best-fit parameters consistently in the region $w_0 >-1$ and $w_a <0$. Excluding SN from the all data combination yields a $2.6σ$ departure from $Λ$CDM, providing a cross-check independent of supernova photometric calibration. These results support the weak preference for evolving dark energy reported by several recent cosmological analyses. By combining growth and geometric probes from a single survey, this work realizes the multi-probe dark energy program envisioned at the inception of DES.

Abbott, T. M.C. [Cerro-Tololo InterAmerican Obs.] ↗