Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLADDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Science based integrated approach to advanced nuclear fuel development - integrated multi-scale multi-physics hierarchical modeling and simulation framework Part III: cladding

Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Reactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems to develop predictive tools is critical. Not only are fabrication and performance models needed to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. In this paper we review the current status of the advanced modeling and simulation of nuclear reactor cladding, with emphasis on what is available and what is to be developed in each scale of the project, how we propose to pass information from one scale to the next, and what experimental information is required for benchmarking and advancing the modeling at each scale level.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Pellet Cladding Interaction Modeling Using the US DOE CASL Fuel Performance Code: Peregrine

The US DOE’s Consortium for Advanced Simulation of LWRs (CASL) program has undertaken an effort to enhance and develop modeling and simulation tools for a virtual reactor application, including high fidelity neutronics, fluid flow/thermal hydraulics, and fuel and material behavior. The fuel performance analysis efforts aim to provide 3-dimensional capabilities for single and multiple rods to assess safety margins and the impact of plant operation and fuel rod design on the fuel thermomechanical- chemical behavior, including Pellet-Cladding Interaction (PCI) failures and CRUD-Induced Localized Corrosion (CILC) failures in PWRs. [1-3] The CASL fuel performance code, Peregrine, is an engineering scale code that is built upon the MOOSE/ELK/FOX computational FEM framework, which is also common to the fuel modeling framework, BISON [4,5]. Peregrine uses both 2-D and 3-D geometric fuel rod representations and contains a materials properties and fuel behavior model library for the UO2 and Zircaloy system common to PWR fuel derived from both open literature sources and the FALCON code [6]. The primary purpose of Peregrine is to accurately calculate the thermal, mechanical, and chemical processes active throughout a single fuel rod during operation in a reactor, for both steady state and off-normal conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

Building America↗

M5 Alloy Specification for TREAT Conceptual Fuel Cladding Selection

The Idaho National Laboratory (INL) Transient Reactor Test Facility (TREAT) is a nuclear test facility designed to provide safety data for fuel designs by simulating conditions during various types of nuclear excursions. The M5 alloy cladding material for the conceptual TREAT Low Enriched Uranium fuel core shall be supplied according to this specification.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Sensitivity Studies on UNF Cladding Structural Integrity under NCT Loading

This work describes the sensitivity analyses performed on the transportation package used in the NCT initial modeling and simulation demonstration [1]. The initial demonstration predicted the structural integrity of the fuel cladding by integrating models from the fuel rod/grid slot level, the single assembly-level, and the full cask-level. A number of sensitivity analyses were performed on the models at the different levels to determine how sensitive the results were to the parameters that were varied. The results are used to coarsely group the parameters investigated into four categories of sensitivity: No Sensitivity, Low Sensitivity; Moderate Sensitivity, and High Sensitivity. The High Sensitivity analyses are described in detail below. The Moderate, Low and No Sensitivity results are briefly described.

used nuclear fuel, UNF, normal conditions of trans↗

DOE EM Sponsored Research on Long-Term Dry Storage of Aluminum Clad SNF

This PowerPoint presentation describes and discusses DOE EM and INL lead studies on addressing potential technical issues associated with long-term dry storage of aluminum clad spent nuclear fuel. This same presentation was made to the US Nuclear Waste Technical Review Board in Nov 2019.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Irradiation damage and IASCC of printed 316L for use as fuel cladding

Additive manufacturing is an area of increasing interest to the nuclear industry. It offers a number of benefits over traditional manufacturing methods, such as the ability to create complex geometries without the need for welds. In addition to the potential for creating nuclear structural components, additive manufacturing may be used to create novel fuel/cladding designs. However, printed steel behaves differently than traditional wrought material. A number of industries are already studying the effects of the printed microstructures on mechanical properties. For cladding material and some structural nuclear components, however, the nuclear industry must also understand the material response to irradiation. This work examines the irradiation damage and the irradiation assisted stress corrosion cracking behavior of both proton irradiated (1 and 5 dpa) printed 316L steel and wrought 316L steel that were irradiated side by side at the Michigan Ion Beam Laboratory. As orientation with respect to the build direction can affect the mechanical properties of printed metal, specimens were taken from multiple orientations within the printed steel. For the IASCC testing, specimens were strained to 4% in simulated BWR NWC water (288°C, 0.2 µS/cm). TEM, SEM and X-ray microCT were used to examine coupons of the material as well as tensile bars used in the IASCC testing. This paper will show the key findings from this work, namely the IASCC response of printed metal (as compared to wrought), as well as the effects of the printed microstructure (such as the pre-existing voids) on the irradiation damage.

36 MATERIALS SCIENCE↗

Analysis of the absorbed hydrogen in cladding tubes applied in the QUENCH-LOCA tests

A shortened loss of coolant scenario was simulated experimentally at fuel rod bundle scale in the QUENCH-LO test. All pressurized rods burst at temperatures between 790 and 855 deg. C. The hydrogen distribution in the cladding of chosen fuel rod simulators was studied by neutron radiography and tomography. It was shown that the time between burst and quenching as well as the temperatures occurring during this period, and hence the degree of inner oxidation, are important parameters for the hydrogen uptake. No hydrogen uptake was measured for the specimen with 63 s or less between burst and quenching. For longer time intervals, hydrogen enriched bands were formed. These bended bands are oriented non-symmetrically to the tube axis. Micro-structure investigations give hints that the hydrogen keeps in solution in the a-zirconium lattice. The hydrogen enriched bands influence the mechanical properties of the rods, characterized by a higher hardness. Brittle fracture occurs in these bands in the tensile test. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear analyses of supercritical water cooled reactor with carbon nano-tube cladding

The authors have confirmed the feasibility of the dual layer clad comprised of iron and carbon nano-tube to problems of Super Critical Water Reactor cores. Continuous energy Monte Carlo method was applied. The difference between JENDL-3.3 and ENDF-6 was confirmed. Depletion was carried out. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Improved cladding nano-structured materials with self-repairing capabilities

When designing nuclear reactors or the materials that go into them, one of the key challenges is finding materials that can withstand an outrageously extreme environment. In addition to constant bombardment by radiation, reactor materials may be subjected to extremes in temperature, physical stress, and corrosive conditions. A limitation in fuel burnup is and usage of the nuclear fuel material is related to the structural material radiation damage, that makes the fuel be removed with low-burnup and immobilized in the waste storage pools. The advanced burnup brings cladding material embitterment due to radiation damage effects corroborated with corrosion effects makes the fuel pellet life shorter. The novel nano-clustered structured sintered material may mitigate simultaneously the radiation damage and corrosion effects driving to more robust structural materials that may make the nuclear reactor safer and more reliable. The development of nano-clustered sinter alloys provides new avenues for further examination of the role of grain boundaries and engineered material interfaces in self-healing of radiation-induced defects driving to the design of highly radiation-tolerant materials for the next generation of nuclear energy applications. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Oxidation of SiC cladding under Loss of Coolant Accident (LOCA) conditions in LWRs

An experimental assessment of Silicon Carbide (SiC) cladding oxidation rate in steam under conditions representative of Loss of Coolant Accidents (LOCA) in light water reactors (LWRs) was conducted. SiC oxidation tests were performed with monolithic alpha phase tubular samples in a vertical quartz tube at a steam temperature of 1140 deg. C and steam velocity range of 1 to 10 m/sec, at atmospheric pressure. Linear weight loss of SiC samples due to boundary layer controlled reaction of silica scale (SiO{sub 2} volatilization) was experimentally observed. The weight loss rate increased with increasing steam flow rate. Over the range of test conditions, SiC oxidation rates were shown to be about 3 orders of magnitude lower than the oxidation rates of zircaloy 4. A SiC volatilization correlation for developing laminar flow in a vertical channel is formulated. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Status of the MeLoDIE experiment, an advanced device for the study of the irradiation creep of LWR cladding with full online capabilities

As a prototype of future instrumented material experiments in the Jules Horowitz Reactor (JHR), the MELODIE project was launched in 2009 by the CEA in collaboration with VTT. Being designed as a biaxial creep experiment with online capability, MELODIE is able to apply an online-controlled biaxial loading on a LWR clad sample up to 120 MPa and to perform an online measurement of its biaxial deformation. An important experimental challenge was to perform reliably accurate measurements under the high nuclear heat load of in-core locations while keeping within their tight space. For that purpose, specific sensors were co-designed with and built by IFE Halden. Manufacturing of the MELODIE components was completed one year ago. The complexity of its in-pile section and of the pressurization system requested a step-by-step tuning of the setup. The toughest part of this process dealt with the Diameter gauge which required a partial redesign to take into account unexpected and unwanted electromagnetic interactions with the hosting device. Final cold performance tests of the on-board instrumentation will be presented. The MELODIE device is now ready and irradiation should start in OSIRIS reactor this spring. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗