Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIRCULAR CONFIGURATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Photogeology and basin configuration of Mare Smythii

A geologic map of the Mare Smythii region of the moon is presented, and the configuration of the basin is defined. An isopach map of the total thickness of the undivided floor materials is based on the observed dependency of crater rim height to diameter of partially buried craters. Mare Smythii is one of the oldest of the circular basins. The proposed sequence of geologic events is (1) impact that produced the Smythii basin in pre-Imbrian time, (2) extensive period of large-scale pre-Imbrian cratering and isostatic adjustments, (3) deposition of pre-Imbrian and Imbrian plains material, (4) early Imbrian period of cratering followed by an extensive sequence of flows through late Imbrian time in the northeastern part of the basin, and (5) late period of cratering during Eratosthenian and Copernican time that produced young craters.

Stewart, H. E.↗

Signal and power roll ring testing update

The development of the roll ring as a long-life, low-torque alternative to the slip ring is discussed. A roll ring consists of one or more circular flexures captured by their own spring force in the annular space between two concentric conductors or contact rings. The advantages of roll rings over other types of electrical transfer devices are: extremely low drag torque, high transfer efficiencies in high-power configurations, extremely low wear debris generation, long life, and low weight for high-power applications.

Smith, Dennis W.↗

Corrective Optics For Camera On Telescope

Assembly of tilted, aspherical circularly symmetric mirrors used as corrective optical subsystem for camera mounted on telescope exhibiting both large spherical wave-front error and inherent off-axis astigmatism. Subsystem provides unobscured camera aperture and diffraction-limited camera performance, despite large telescope aberrations. Generic configuration applied in other optical systems in which aberations deliberately introduced into telescopes and corrected in associated cameras. Concept of corrective optical subsystem provides designer with additional degrees of freedom used to optimize optical system.

Macenka, Steven A.↗

Verifying black hole orbits with gravitational spectroscopy

Gravitational waves from test masses bound to geodesic orbits of rotating black holes are simulated, using Teukolsky's black hole perturbation formalism, for about ten thousand generic orbital configurations. Each binary radiates power exclusively in modes with frequencies that are integer-linear combinations of the orbit's three fundamental frequencies. General spectral properties are found with a survey of orbits about a black hole taken to be rotating at 80% of the maximal spin. The orbital eccentricity is varied from 0.1 to 0.9. Inclination ranges from 20 deg. to 160 deg. and comes to within 20 deg. of polar. Semilatus rectum is varied from 1.2 to 3 times the value at the innermost stable circular orbits. The following general spectral properties are found: (i) 99% of the radiated power is typically carried by a few hundred modes, and at most by about a thousand modes, (ii) the dominant frequencies can be grouped into a small number of families defined by fixing two of the three integer frequency multipliers, and (iii) the specifics of these trends can be qualitatively inferred from the geometry of the orbit under consideration. Detections using triperiodic analytic templates modeled on these general properties would constitute a verification of radiation from an adiabatic sequence of black hole orbits and would recover the evolution of the fundamental orbital frequencies. In an analogy with ordinary spectroscopy, this would compare to observing the Bohr model's atomic hydrogen spectrum without being able to rule out alternative atomic theories or nuclei. The suitability of such a detection technique is demonstrated using snapshots computed at 12-hour intervals throughout the last three years before merger of a kludged inspiral. The system chosen is typical of those thought to occur in galactic nuclei and to be observable with space-based gravitational wave detectors like LISA. Because of circularization, the number of excited modes decreases as the binary evolves. A hypothetical detection algorithm that tracks mode families dominating the first 12 hours of the inspiral would capture 98% of the total power over the remaining three years.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental study on the effects of blast-cap configurations and charge patterns on coke descending in CDQ cooling shaft

The coke descending behavior in a CDQ cooling shaft is studied experimentally by means of a tracing method with a digital camera. For three different blast-caps, the law of coke flow is studied under five conditions of coke charge. The experimental results show that, for the sake of the uniformity of the coke burden descending, a blast-cap with elliptical cross-section is a better choice than that with circular cross-section regardless of high or low placement. A coke charge pattern with a flat top burden surface is preferable to that with peak-valley surface, a double-peak superior to a one-peak. Trajectory and average velocity distribution of coke behavior depend weakly on whether the coke is continuously fed or not as the discharging began. The blast-caps have local effects on the descending coke and hardly affect whether the cokes flow smoothly or not in the case of coke burden with enough depth.

01 COAL, LIGNITE, AND PEAT↗

A 3D DLM/FD method for simulating the motion of spheres and ellipsoids under creeping flow conditions

We present in this article a novel distributed Lagrange multiplier/fictitious domain (DLM/FD) method for simulating fluid-particle interaction in three-dimensional (3D) Stokes flow. The methodology is validated by comparing the numerical results for a neutrally buoyant particle, of either spherical or prolate shape, with the associated Jeffrey's solutions for a simple shear flow. The results concerning two balls, interacting under creeping flow conditions in a bounded shear flow, are consistent with those available in the literature. We will discuss also the interactions of two balls in a bounded shear flow, when these balls are very close initially. For a prolate ellipsoid rotating in a shear flow under the sole effect of the particle inertia, shear plane tumbling is stable, while log-rolling is unstable. For two prolate ellipsoids interacting in a bounded shear flow, the results are similar to those for two balls if the major axes are initially orthogonal to the shear plane (a result not at all surprising considering that the intersections of the ellipsoids with the shear pane are circular).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of layered transformation-optics devices of arbitrary shape

Transformation-optics devices of arbitrary shapes usually result in material parameters inside the device that feature level sets of different shapes. Consequently, these devices cannot easily be implemented using a layered architecture and thus are, generally, more difficult to realize in practice. We present a method of designing two-dimensional transformation-optics devices of arbitrary shapes characterized by material parameters of same-level sets, thus suitable to be implemented through concentric layers, each layer being made of a single type of material or metamaterial. Remarkably, we show that transformations leading to such designs are obtained from solutions to the well-known eikonal equation. This approach allows fabrication techniques developed for cylindrical designs of circular cross section to be directly applied to devices of other shapes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Quantum mechanics of hyperbolic orbits in the Kepler problem

The problem of deriving macroscopic properties from the Hamiltonian of the hydrogen atom is resumed by extending previous results in the literature, which predicted elliptic orbits, into the region of hyperbolic orbits. As a main tool, coherent states of the harmonic oscillator are used which are continued to imaginary frequencies. The Kustaanheimo-Stiefel (KS) map is applied to transform the original configuration space into the product space of four harmonic oscillators with a constraint. The relation derived between real time and oscillator (pseudo) time includes quantum corrections. In the limit ({h_bar}/2{pi}){yields}0, the time-dependent mean values of position and velocity describe the classical motion on a hyperbola and a circular hodograph, respectively. Moreover, the connection between pseudotime and real time comes out in analogy to Kepler's equation for elliptic orbits. The mean-square-root deviations of position and velocity components behave similarly in time to the corresponding ones of a spreading Gaussian wave packet in free space. To check the approximate treatment of the constraint, its contribution to the mean energy is determined with the result that it is negligible except for energy values close to the parabolic orbit with eccentricity equal to 1. It is inevitable to introduce a suitable scalar product in R{sup 4} which makes both the transformed Hamiltonian and the velocity operators Hermitian. An elementary necessary criterion is given for the energy interval where the constraint can be approximated by averaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RADIO POLARIZATION OBSERVATIONS OF THE SNAIL: A CRUSHED PULSAR WIND NEBULA IN G327.1–1.1 WITH A HIGHLY ORDERED MAGNETIC FIELD

Pulsar wind nebulae (PWNe) are suggested to be acceleration sites of cosmic rays in the Galaxy. While the magnetic field plays an important role in the acceleration process, previous observations of magnetic field configurations of PWNe are rare, particularly for evolved systems. We present a radio polarization study of the “Snail” PWN inside the supernova remnant G327.1−1.1 using the Australia Telescope Compact Array. This PWN is believed to have been recently crushed by the supernova (SN) reverse shock. The radio morphology is composed of a main circular body with a finger-like protrusion. We detected a strong linear polarization signal from the emission, which reflects a highly ordered magnetic field in the PWN and is in contrast to the turbulent environment with a tangled magnetic field generally expected from hydrodynamical simulations. This could suggest that the characteristic turbulence scale is larger than the radio beam size. We built a toy model to explore this possibility, and found that a simulated PWN with a turbulence scale of about one-eighth to one-sixth of the nebula radius and a pulsar wind filling factor of 50%–75% provides the best match to observations. This implies substantial mixing between the SN ejecta and pulsar wind material in this system.

79 ASTRONOMY AND ASTROPHYSICS↗

Tunable chiral and nematic states in the triple-Q antiferromagnet Co 1/3 TaS 2

Complex spin configurations in magnetic materials, ranging from collinear single-Q to non-coplanar multi-Q states, exhibit rich symmetry and chiral properties. However, their detailed characterization is often hindered by the limited spatial resolution of neutron diffraction techniques. Here we employ magnetic circular dichroism and magnetic linear dichroism to investigate the triangular lattice antiferromagnet Co 1/3 TaS 2 , revealing three-state (Z 3 ) nematicity and also spin chirality across its multi-Q magnetic phases. At intermediate temperatures, the presence of linear dichroism identifies nematicity arising from a single-Q stripe phase, while at high magnetic fields and low temperatures, a phase characterized solely by circular dichroism emerges, signifying a purely chiral non-coplanar triple-Q state. Notably, at low temperatures and small fields, we discover a unique phase where both chirality and nematicity coexist. A theoretical analysis based on a continuous multi-Q manifold captures the emergence of these distinct magnetic phases, as a result of the interplay between four-spin interactions and weak magnetic anisotropy. Additionally, both circular and linear dichroism microscopy spatially resolves the chiral and nematic domains. Our findings establish Co 1/3 TaS 2 as a rare platform hosting diverse multi-Q states with distinct combinations of spin chirality and nematicity while demonstrating the effectiveness of polarized optical techniques in characterizing complex magnetic textures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of far-infrared three-wave polarimeter-interferometer system for the J-TEXT tokamak

A multichannel three-wave far-infrared polarimeter-interferometer will be constructed on the J-TEXT tokamak (R=1.05 m, a=0.27 m, B{sub T}{<=}3 T, and I{sub P}{<=}350 kA) for current density profile and electron density profile measurements. The system will adopt the three-wave polarimeter configuration which was first introduced on RTP. Three 432.5 {mu}m HCOOH lasers pumped by three CO{sub 2} lasers separately will be adopted, which could generate high output power, nearly 50 mW at each cavity. Two of them will be counter-rotating circularly polarized to probe the Faraday angle, while the third laser will be used as a local oscillator to get the phase shift caused by electron density. Excellent port access (600x76 mm{sup 2}) and high laser power would promise a profile measurement across the whole plasma section with good signal quality. A high-speed digital phase comparator with a few ({approx}2) {mu}s temporal resolution will be developed, so that fast changes of current or density profile could be measured. Six channels will be installed in the first stage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE DYNAMICALLY DISRUPTED GAP IN HD 142527

The vestiges of planet formation have been observed in debris disks harboring young and massive gaseous giants. The process of giant planet formation is terminated by the dissipation of gas in the protoplanetary disk. The gas-rich disk around HD 142527 features a small inner disk, a large gap from {approx}10 to {approx}140 AU, and a massive outer disk extending out to {approx}300 AU. The gap could have been carved out by a giant planet. We have imaged the outer regions of this gap using the adaptive optics camera NICI on Gemini South. Our images reveal that the disk is dynamically perturbed. The outer boundary of the roughly elliptical gap appears to be composed of several segments of spiral arms. The stellar position is offset by 0.''17 {+-} 0.''02 from the centroid of the cavity, consistent with earlier imaging at coarser resolutions. These transient morphological features are expected in the context of disk evolution in the presence of a perturbing body located inside the cavity. We perform hydrodynamical simulations of the dynamical clearing of a gap in a disk. A 10 M{sub jup} body in a circular orbit at r = 90 AU perturbs the whole disks, even after thousands of orbits. By then the model disk has an eccentric and irregular cavity, flanked by tightly wound spiral arms, but it is still evolving far from steady state. A particular transient configuration that is a qualitative match to HD 142527 is seen at 1.7 Myr.

79 ASTRONOMY AND ASTROPHYSICS↗

RENDEZVOUS AND DOCKING TECHNIQUES

To implement the primary space mission of this decade – manned lunar exploration -- the operational assistance of rendezvous and docking is being considered as an alternative to possible problems in obtaining a boost vehicle capable of direct flight. This paper concentrates on the mechanization of the rendezvous and docking phase of such a lunar mission. As indicated in previous papers, rendezvous can take place in either an earth or lunar orbit (or on the lunar surface); it can involve the mating of stages, transfer of fuel, or the return of a shuttle to a “mother” ship; direct ascent or parking orbits can be used; the orbits can be circular or more general ellipses; finally, either or both of the spacecraft can participate in the rendezvous maneuvers. Since there is no intent here to discuss the pros and cons of each approach or to cover all possible mission profiles, guidance schemes and hardware configurations, one particular profile has been selected to display the significant features of most rendezvous missions. In many respects, rendezvous is less difficult than aircraft interception since the target is friendly and there is no severe time constraint. The latter feature allows considerable freedom of design especially with the great versatility of a human in the loop. This remains true even for a purely automatic mode. Perhaps the largest design problem concerns the selection of the mission to be implemented followed by the optimization or systems engineering of a mechanization from the multitude of possible schemes and techniques. A most important factor in the optimization is that of reliability and the redundancy, alternate or backup modes, etc., associated with the approach. While a primary system can be rather easily mechanized with modest equipment requirements, reliability considerations will result in additional hardware, tighter specifications and more safety factors (e. g., propellant margin). This is a very complex area and will only briefly be mentioned in the following discussion.

Rendezvous↗

Vortex noise from nonrotating cylinders and airfoils

An experimental study of vortex-shedding noise was conducted in an acoustic research tunnel over a Reynolds-number range applicable to full-scale helicopter tail-rotor blades. Two-dimensional tapered-chord nonrotating models were tested to simulate the effect of spanwise frequency variation on the vortex-shedding mechanism. Both a tapered circular cylinder and tapered airfoils were investigated. The results were compared with data for constant-diameter cylinder and constant-chord airfoil models also tested during this study. Far-field noise, surface pressure fluctuations, and spanwise correlation lengths were measured for each configuration. Vortex-shedding noise for tapered cylinders and airfoils was found to contain many narrowband-random peaks which occurred within a range of frequencies corresponding to a predictable Strouhal number referenced to the maximum and minimum chord. The noise was observed to depend on surface roughness and Reynolds number.

Schlinker, R. H.↗

Orbital maneuvering and reaction control systems

Orbital maneuvering systems (OMS) and reaction control systems (RCS) provide capabilities to spacecraft that include orbit circularization, rendezvous maneuvers, attitude control, and re-entry delta velocity. The mission and vehicle requirements can place severe demands on the orbital maneuvering and reaction control systems. In order to perform proper trade studies and to design these systems, the mission and vehicle configuration must be well defined. In the absence of a clearly defined mission and vehicle configuration, the research and development of basic technologies must support future design efforts by providing a range of options and data from which to select. This paper describes the key OMS and RCS requirements and technology.

Hurlbert, Eric↗

Aspects of neutrino oscillation in alternative gravity theories

Neutrino spin and flavour oscillation in curved spacetime have been studied for the most general static spherically symmetric configuration. Having exploited the spherical symmetry we have confined ourselves to the equatorial plane in order to determine the spin and flavour oscillation frequency in this general set-up. Using the symmetry properties we have derived spin oscillation frequency for neutrino moving along a geodesic or in a circular orbit. Starting from the expression of neutrino spin oscillation frequency we have shown that even in this general context, in high energy limit the spin oscillation frequency for neutrino moving along circular orbit vanishes. We have verified previous results along this line by transforming to Schwarzschild coordinates under appropriate limit. This finally lends itself to the probability of neutrino helicity flip which turns out to be non-zero. While for neutrino flavour oscillation we have derived general results for oscillation phase, which subsequently have been applied to three different gravity theories. One, of them appears as low-energy approximation to string theory, where we have an additional field, namely, dilaton field coupled to Maxwell field tensor. This yields a realization of Reissner-Nordström solution in string theory at low-energy. Next one corresponds to generalization of Schwarzschild solution by introduction of quadratic curvature terms of all possible form to the Einstein-Hilbert action. Finally, we have also discussed regular black hole solutions. In all these cases the flavour oscillation probabilities can be determined for solar neutrinos and thus can be used to put bounds on the parameters of these gravity theories. While for spin oscillation probability, we have considered two cases, Gauss-Bonnet term added to the Einstein-Hilbert action and the f(R) gravity theory. In both these cases we could impose bounds on the parameters which are consistent with previous considerations. In a nutshell, in this work we have presented both spin and flavour oscillation frequency of neutrino in most general static spherically symmetric spacetime, encompassing a vast class of solutions, which when applied to three such instances in alternative theories for flavour oscillation and two alternative theories for spin oscillation put bounds on the parameters of these theories. Implications are also discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Free-Mass and Interface Configurations of Hammering Mechanisms

A series of free-mass designs for the ultrasonic/ sonic driller/corer (USDC) has been developed to maximize the transfer of energy from the piezoelectric transducer through the horn to the bit, as well as to minimize potential jamming. A systematic development was made producing novel designs of free-mass configurations where the impact force is spread across a minimal area maximizing the impact on the bit. The designed free masses were made to operate at high temperatures (500 C) as on Venus, and they can be made to operate at extremely low temperature, too. In normal operation, the free mass bounces between the horn and the bit, impacting both repeatedly. The impact stress profile, maximum stress, contact time duration, and the required yielding stress for the materials of the free mass, bit, and horn are all affected by the contact area. A larger contact area results in lower stress in the contact region, and avoids yielding of the materials. However, before the excitation voltage is applied to the transducer, the horn, free mass, and the bit are pressed together. Larger contact area results in a stronger coupling of the bit to the horn transducer, which greatly changes the vibration characteristics of the transducer, and makes the USDC difficult to start. To obtain optimum performance, a catalog of free-mass designs is required, allowing maximum flexibility during trade-off for these conflicting contact area requirements. For this purpose, seven different designs were conceived: point contacts, circular contacts, point/circular contacts, line contacts, ring contacts, line/ring contacts, and dashed line contacts. Besides point/circular and line/ring contacts, the free mass can be designed as any of the above shapes. Depending on the ratio of the diameter to the height, and the free-mass retention method used (the cup or rod), the free mass can be configured with one or more sliding surfaces on the outside or inside diameter surface or both. Matching horn tips and free mass may also offer some utility in maximizing the stress pulse.

Bao, Xiaoqi↗

Cyclotron resonance in plasma flow

This paper is devoted to the mechanism of particle acceleration via resonant interaction with the electromagnetic circular wave propagating along the inhomogeneous background magnetic field in the presence of a plasma flow. We consider the system where the plasma flow velocity is large enough to change the direction of wave propagation in the rest frame. This system mimics a magnetic field configuration typical for inner structure of a quasi-parallel shock wave. We consider conditions of gyroresonant interaction when the force corresponding to an inhomogeneity of the background magnetic field is compensated by the Lorentz force of the wave-magnetic field. The wave-amplitude is assumed to be about 10% of the background magnetic field. We show that particles can gain energy if kv{sub sw}>ω>kv{sub sw}−Ω{sub c} where k is the wave number, v{sub sw} is a plasma flow velocity, and ω and Ω{sub c} are the wave frequency and the particle gyrofrequency, respectively. This mechanism of acceleration resembles the gyrosurfing mechanism, but the effect of the electrostatic field is replaced by the effect of the magnetic field inhomogeneity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗