Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bond”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Copper-dependent halogenase catalyses unactivated C−H bond functionalization

Carbon–hydrogen (C–H) bonds are the foundation of essentially every organic molecule, making them an ideal place to do chemical synthesis. The key challenge is achieving selectivity for one particular C(sp 3 )−H bond. In recent years, metalloenzymes have been found to perform C(sp 3 )−H bond functionalization. Despite substantial progresses in the past two decades, enzymatic halogenation and pseudohalogenation of unactivated C(sp 3 )−H—providing a functional handle for further modification—have been achieved with only non-haem iron/α-ketoglutarate-dependent halogenases, and are therefore limited by the chemistry possible with these enzymes. Here, in this work, we report the discovery and characterization of a previously unknown halogenase ApnU, part of a protein family containing domain of unknown function 3328 (DUF3328). ApnU uses copper in its active site to catalyse iterative chlorinations on multiple unactivated C(sp 3 )−H bonds. By taking advantage of the softer copper centre, we demonstrate that ApnU can catalyse unprecedented enzymatic C(sp 3 )−H bond functionalization such as iodination and thiocyanation. Using biochemical characterization and proteomics analysis, we identified the functional oligomeric state of ApnU as a covalently linked homodimer, which contains three essential pairs—one interchain and two intrachain—of disulfide bonds. The metal-coordination active site in ApnU consists of binuclear type II copper centres, as revealed by electron paramagnetic resonance spectroscopy. This discovery expands the enzymatic capability of C(sp 3 )−H halogenases and provides a foundational understanding of this family of binuclear copper-dependent oxidative enzymes.

biocatalysis↗

Switching off hydrogen-bond-driven excitation modes in liquid methanol

Hydrogen bonding plays an essential role on intermolecular forces, and consequently on the thermodynamics of materials defined by this elusive bonding character. It determines the property of a vital liquid as water as well as many processes crucial for life. The longstanding controversy on the nature of the hydrogen bond (HB) can be settled by looking at the effect of a vanishing HB interaction on the microscopic properties of a given hydrogen-bonded fluid. This task suits the capabilities of computer simulations techniques, which allow to easily switch off HB interactions. We then use molecular dynamics to study the microscopic properties of methanol, a prototypical HB liquid. Fundamental aspects of the dynamics of methanol at room temperature were contextualised only very recently and its rich dynamics was found to have striking analogies with that of water. The lower temperature (200 K) considered in the present study led us to observe that the molecular centre-of-mass dynamics is dominated by four modes. Most importantly, the computational ability to switch on and off hydrogen bonds permitted us to identify which, among these modes, have a pure HB-origin. This clarifies the role of hydrogen bonds in liquid dynamics, disclosing new research opportunities and unexplored interpretation schemes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct observation of symmetrization of hydrogen bond in δ-AlOOH under mantle conditions using neutron diffraction

At ambient pressure, the hydrogen bond in materials such as ice, hydrates, and hydrous minerals that compose the Earth and icy planets generally takes an asymmetric O-H···O confguration. Pressure signifcantly afects this confguration, and it is predicted to become symmetric, such that the hydrogen is centered between the two oxygen atoms at high pressure. Changes of physical properties of minerals relevant to this symmetrization have been found; however, the atomic confguration around this symmetrization has remained elusive so far. Here we observed the pressure response of the hydrogen bonds in the aluminous hydrous minerals δ-AlOOH and δ-AlOOD by means of a neutron difraction experiment. We fnd that the transition from P21nm to Pnnm at 9.0GPa, accompanied by a change in the axial ratios of δ-AlOOH, corresponds to the disorder of hydrogen bond between two equivalent sites across the center of the O···O line. Symmetrization of the hydrogen bond is observed at 18.1GPa, which is considerably higher than the disorder pressure. Moreover, there is a signifcant isotope efect on hydrogen bond geometry and transition pressure. This study indicates that disorder of the hydrogen bond as a precursor of symmetrization may also play an important role in determining the physical properties of minerals such as bulk modulus and seismic wave velocities in the Earth’s mantle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Links between through-bond interactions and assembly structure in simple piperidones

3,5-Disubstituted piperidones provide an opportunity to explore donor–acceptor through-bond interactions in the context of molecular and supramolecular structure. The crystal structure of cis-3,5-dibenzyl-1-phenylpiperidin-4-one 3 is disordered and the lattice accommodates a ~3 : 1 ratio of the N-Ph equatorial (3-eq) and N-Ph axial (3-ax) epimers, based on refined values of occupancy factors. The fortuitous result allows a side-by-side comparison of the two configurations with respect to their donor–acceptor through-bond interactions. The energy difference between 3-ax and 3-eq (ΔE ax–eq ) has been evaluated in the gas phase using extensive first principles calculations, and for many levels of theory this difference parallels the experimentally-observed configurational ratio in the solid state (where the epimers share nearly identical packing environments). The calculations further show a difference in the through-bond stabilization for 3-ax and 3-eq, with larger contributions for 3-ax. Natural bond order (NBO) analysis quantifies the delocalization of the donor nitrogen lone pair into the adjacent carbon–carbon bonds and carbonyl acceptor for the 3-axepimer. The work concludes that molecular-level structural perturbations that arise from or otherwise influence through-bond donor–acceptor interactions have consequences on solid-state and supramolecular assembly structure.

Chemistry↗

Liquid crystalline epoxy networks with exchangeable disulfide bonds

In this study, a liquid crystalline epoxy network (LCEN) with exchangeable disulfide bonds is synthesized by polymerizing a biphenyl-based epoxy monomer with an aliphatic dicarboxylic acid curing agent containing a disulfide bond. The effect of disulfide bonds on curing behavior and liquid crystalline (LC) phase formation of the LCEN is investigated. The presence of the disulfide bonds results in an increase in the reaction rate, leading to a reduction in liquid crystallinity of the LCEN. In order to promote LC phase formation and stabilize the self-assembled LC domains, a similar aliphatic dicarboxylic acid without the disulfide bond is used as a co-curing agent to reduce the amount of exchangeable disulfide bonds in the system. After optimizing the molar ratio of the two curing agents, the resulting LCEN exhibits improved reprocessability and recyclability because of the disulfide exchange reactions, while preserving LC properties, such as the reversible LC phase transition and macroscopic LC orientation, for shape memory applications.

36 MATERIALS SCIENCE↗

Halogen bonding for the design of inhibitors by targeting the S1 pocket of serine proteases

Halogen bonding (or X bonding) has attracted increasing interest due to its significant role in molecular recognition in biological systems. Trypsin-like serine proteases have many physiological and pathophysiological functions. There is therefore extensive interest in generating specific inhibitors for pharmacological intervention in their enzymatic activity. We study here if it is possible to use halogenated compounds as the P1 group to bind to the S1 specificity pocket of trypsin-like serine proteases to avoid the low bioavailability of the amidine or guanidine P1 group that is typically used in many inhibitors. We used 4-chlorobenzylamine (ClBA), 4-bromobenzylamine (BrBA) and 4-iodobenzylamine (IBA) as probes to test their binding modes to a trypsin-like serine protease, urokinase-type plasminogen activator (uPA), which has been recognized as a marker for breast cancer and an important target for inhibitor development. The results showed that these compounds inhibited uPA with stronger efficacies compared with their non-halogenated analogues. We also determined the high-resolution crystal structures of uPA in complex with BrBA and IBA, respectively. The structures revealed that BrBA bound to the S1 pocket of uPA via halogen bonds, but IBA did not make halogen bonds with uPA, demonstrating that the iodine may not be the best choice as a target moiety for serine proteases. These results advocate halogen bonding, especially bromine bonding, as an efficient strategy for the future design of novel inhibitors against trypsin-like serine proteases to provide strong potency and promote bioavailability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How non-bonding domains affect the active assembly of microtubule spools

We report that structural defects can determine and influence various properties of materials, and many technologies rely on the manipulation of defects ( e.g. , semiconductor industries). In biological systems, management of defects/errors ( e.g. DNA repair) is critical to an organism's survival, which has inspired the design of artificial nanomachines that mimic nature's ability to detect defects and repair damage. Biological motors have captured considerable attention in developing such capabilities due to their ability to convert energy into directed motion in response to environmental stimuli, which maximizes their ability for detection and repair. The objective of the present study was to develop an understanding of how the presence of non-bonding domains, here considered as a “defect”, in microtubule (MT) building blocks affect the kinesin-driven, active assembly of MT spools. The assembly/joining of micron-scale bonding ( i.e. , biotin-containing) and non-bonding ( i.e. , no biotin) MTs resulted in segmented MT building blocks consisting of alternating bonding and non-bonding domains. Here, the introduction of these MT building blocks into a kinesin gliding motility assay along with streptavidin-coated quantum dots resulted in the active assembly of spools with altered morphology but retained functionality. Moreover, it was noted that non-bonding domains were autonomously and preferentially released from the spools over time, representing a mechanism by which defects may be removed from these structures. In conclusion, our findings demonstrate that this active assembly system has an intrinsic ability for quality control, which can be potentially expanded to a wide range of applications such as self-regulation and healing of active materials.

36 MATERIALS SCIENCE↗

Bonding similarities and differences between Y–Sb–Te and Sc–Sb–Te phase-change memory materials

The scandium (Sc) – alloyed Sb 2 Te 3 phase-change alloy has recently been found to enable ultrafast crystal nucleation due to the formation of Sc-stabilized octahedral motifs in the amorphous phase, rendering cache-type phase-change memory feasible. When yttrium (Y) is added, however, non-octahedral bonding patterns form in the amorphous Sb 2 Te 3 -based network even though Y has a valence electron configuration similar to that of Sc and also forms perfect octahedral bonding environments with tellurium in the YTe crystal. Here we elucidate the origin of this difference between Sc and Y, by carrying out thorough ab initio simulations and orbital-based bonding analyses on amorphous Y–Sb–Te and Sc–Sb–Te compounds. We also demonstrate how the smooth overlap of atomic positions (SOAP) similarity kernel can be used to quantify the structural similarity of local motifs in the amorphous phase with respect to various crystalline yttrium and scandium tellurides, both in the nearest-neighbor shell and beyond. We discover that the bonding contrast of Y- and Sc-centered structural motifs in amorphous Sb 2 Te 3 stems from their parent crystals at high Te concentrations. The larger atomic radius of Y and the weaker charge transfer when bonded with Te is found to allow more Te neighbors and cause a more open bonding environment, leading to higher coordination numbers and non-octahedral environments. We discuss the implications of the different local environments for practical applications in memory devices.

36 MATERIALS SCIENCE↗

Dynamic metal-linker bonds in metal–organic frameworks

Metal-linker bonds serve as the “glue” that binds metal ions to multitopic organic ligands in the porous materials known as metal–organic frameworks (MOFs). Despite ample evidence of bond lability in molecular and polymeric coordination compounds, the metal-linker bonds of MOFs were long assumed to be rigid and static. Given the importance of ligand fields in determining the behaviour of metal species, labile bonding in MOFs would help explain outstanding questions about MOF behaviour, while providing a design tool for controlling dynamic and stimuli-responsive optoelectronic, magnetic, catalytic, and mechanical phenomena. Here, in this work, we present emerging evidence that MOF metal-linker bonds exist in dynamic equilibria between weakly and tightly bond conformations, and that these equilibria respond to guest–host chemistry, drive phase change behavior, and exhibit size-dependence in MOF nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of RF power and annealing on chemical bonding and morphology of a-CN{sub x} thin films as humidity sensor

Amorphous carbon nitride (a-CN{sub x}) thin films were deposited using radio frequency plasma enhanced chemical vapor deposition (rf-PECVD) technique. A set of a-CN{sub x} thin films were prepared using pure methane (CH{sub 4}) gas diluted with nitrogen (N{sub 2}) gas. The rf power was varied at 50, 60, 70, 80, 90 and 100 W. These films were then annealed at 400 °C in a quartz tube furnace in argon (Ar) gas. The effects of rf power and thermal annealing on the chemical bonding and morphology of these samples were studied. Surface profilometer was used to measure film thickness. Fourier transform infra-red spectroscopy (FTIR) and Field emission scanning electron microscopy (FESEM) measurements were used to determine their chemical bonding and morphology respectively. The deposition rate of the films increased constantly with increasing rf power up to 80W, before decreasing with further increase in rf power. Fourier transform infra-red spectroscopy (FTIR) studies showed a systematic change in the spectra and revealed three main peaks included C-N, C=N, C=C and C≡N triple bond. C=N and C≡N bonds decreased with increased C-N bonds after thermal annealing process. The FESEM images showed that the structure is porous for as-deposited and covered by granule-like grain structure after thermal annealing process was done. The resistance of the a-CN{sub x} thin film changed from 23.765 kΩ to 5.845 kΩ in the relative humidity range of 5 to 92 % and the film shows a good response and repeatability as a humidity sensing materials. This work showed that rf power and thermal annealing has significant effects on the chemical bonding and surface morphology of the a-CN{sub x} films and but yield films which are potential candidate as humidity sensor device.

36 MATERIALS SCIENCE↗

Unconventional hydrogen bonding to organic ions in the gas phase: Stepwise association of hydrogen cyanide with the pyridine and pyrimidine radical cations and protonated pyridine

Equilibrium thermochemical measurements using the ion mobility drift cell technique have been utilized to investigate the binding energies and entropy changes for the stepwise association of HCN molecules with the pyridine and pyrimidine radical cations forming the C{sub 5}H{sub 5}N{sup +·}(HCN){sub n} and C{sub 4}H{sub 4}N{sub 2}{sup +·}(HCN){sub n} clusters, respectively, with n = 1–4. For comparison, the binding of 1–4 HCN molecules to the protonated pyridine C{sub 5}H{sub 5}NH{sup +}(HCN){sub n} has also been investigated. The binding energies of HCN to the pyridine and pyrimidine radical cations are nearly equal (11.4 and 12.0 kcal/mol, respectively) but weaker than the HCN binding to the protonated pyridine (14.0 kcal/mol). The pyridine and pyrimidine radical cations form unconventional carbon-based ionic hydrogen bonds with HCN (CH{sup δ+}⋯NCH). Protonated pyridine forms a stronger ionic hydrogen bond with HCN (NH{sup +}⋯NCH) which can be extended to a linear chain with the clustering of additional HCN molecules (NH{sup +}⋯NCH··NCH⋯NCH) leading to a rapid decrease in the bond strength as the length of the chain increases. The lowest energy structures of the pyridine and pyrimidine radical cation clusters containing 3-4 HCN molecules show a strong tendency for the internal solvation of the radical cation by the HCN molecules where bifurcated structures involving multiple hydrogen bonding sites with the ring hydrogen atoms are formed. The unconventional H-bonds (CH{sup δ+}⋯NCH) formed between the pyridine or the pyrimidine radical cations and HCN molecules (11–12 kcal/mol) are stronger than the similar (CH{sup δ+}⋯NCH) bonds formed between the benzene radical cation and HCN molecules (9 kcal/mol) indicating that the CH{sup δ+} centers in the pyridine and pyrimidine radical cations have more effective charges than in the benzene radical cation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphene-like conjugated π bond system in Pb{sub 1−x}Sn{sub x}Se

Following the identification of the π bond in graphene, in this work, a π bond constructed through side-to-side overlap of half-filled 6p{sub z} orbitals was observed in a non-carbon crystal of Pb{sub 1–x}Sn{sub x}Se (x ∼ 0.34) (PSS), a prototype topological crystalline insulator and thermoelectric material with a high figure-of-merit. PSS compounds with a rock-salt type cubic crystal structure were found to consist of σ bond connected covalent chains of Pb(Sn)-Se with an additional π bond that is shared as a conjugated system among the four nearest neighbor Pb pairs in square symmetry within all (001) monoatomic layers per cubic unit cell. The π bond formed with half-filled 6p{sub z} orbitals between Pb atoms is consistent with the calculated results from quantum chemistry. The presence of π bonds was identified and verified with electron energy-loss spectroscopy through plasmonic excitations and electron density mapping via an inverse Fourier transform of X-ray diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical mechanisms of copper-copper wafer bonding

The study of the physical mechanisms driving Cu-Cu wafer bonding allowed for reducing the bonding temperatures below 200 °C. Metal thermo-compression Cu-Cu wafer bonding results obtained at such low temperatures are very encouraging and suggest that the process is possible even at room temperature if some boundary conditions are fulfilled. Sputtered (PVD) and electroplated Cu thin layers were investigated, and the analysis of both metallization techniques demonstrated the importance of decreasing Cu surface roughness. For an equal surface roughness, the bonding temperature of PVD Cu wafers could be even further reduced due to the favorable microstructure. Their smaller grain size enhances the length of the grain boundaries (observed on the surface prior bonding), acting as efficient mass transfer channels across the interface, and hence the grains are able to grow over the initial bonding interface. Due to the higher concentration of random high-angle grain boundaries, this effect is intensified. The model presented is explaining the microstructural changes based on atomic migration, taking into account that the reduction of the grain boundary area is the major driving force to reduce the Gibbs free energy, and predicts the subsequent microstructure evolution (grain growth) during thermal annealing.

36 MATERIALS SCIENCE↗

Mechanisms of formation of chemical bonding and defect formation at the a-SiO 2 /BaTiO 3 interfaces

The structure and mechanisms of bonding and defect formation at the interfaces between amorphous silica (a-SiO2) and BaTiO3(0 0 1) were investigated using ab initio molecular dynamics. It was found that the nature of interfacial bonds crucially depends on the BaTiO3 surface termination. In particular, the interface between silica and TiO2-terminated BaTiO3 (BTO) slab is characterised by strong covalent Ti–O–Si bonds, while the interface between silica and BaO-terminated BTO demonstrates ionic character of interfacial bonds and exhibits bond instability. In both cases, the dynamics of oxygen species at oxide interfaces is a driving force of the formation of interfacial bonds and defects.

defects↗

Nature of Interatomic Bonding in Controlling the Mechanical Properties of Calcium Silicate Hydrates

Calcium silicate hydrate (C–S–H) is the most important phase of hydrated cement gel which is the key material in construction industry. It is well accepted that hardened cement paste consists of either poorly crystalline or completely disordered phases. Although a myriad of speculative atomistic models of disordered C–S–H have been proposed, the fundamental basis of structure–property relationships remain elusive. This study focuses upon the correlations between mechanical properties and electronic structure based on well‐defined quantum mechanical parameters. We use 20 CSH minerals with known structure to gain fundamental understanding of structure–property relationship. The results indicate Si–O bond order density, which represents the cumulative bond strength of SiO bonds, has no direct correlation with bulk mechanical properties which is counterintuitive and against conventional wisdom. The variations are determined more precisely by the overall atomic and electronic structure dictated by bond order density of the Ca–O and hydrogen bonds ( HB ). Most importantly, there is a multifaceted balance between different types of interatomic bonds including the HB s in controlling mechanical properties. HB s categorized in relation to next nearest neighbor ( NNN ) enable us to identify specific types of HB s that are prevalent in CSH . In certain crystals such as suolunite, the HB network is organized in such a unique way that enhances its mechanical properties. The approach and findings presented in this paper points to a broad roadmap for the developing next‐generation cements.

Dharmawardhana, Chamila↗

Widespread Disulfide Bonding in Proteins from Thermophilic Archaea

Disulfide bonds are generally not used to stabilize proteins in the cytosolic compartments of bacteria or eukaryotic cells, owing to the chemically reducing nature of those environments. In contrast, certain thermophilic archaea use disulfide bonding as a major mechanism for protein stabilization. Here, we provide a current survey of completely sequenced genomes, applying computational methods to estimate the use of disulfide bonding across the Archaea. Microbes belonging to the Crenarchaeal branch, which are essentially all hyperthermophilic, are universally rich in disulfide bonding while lesser degrees of disulfide bonding are found among the thermophilic Euryarchaea, excluding those that are methanogenic. The results help clarify which parts of the archaeal lineage are likely to yield more examples and additional specific data on protein disulfide bonding, as increasing genomic sequencing efforts are brought to bear.

59 BASIC BIOLOGICAL SCIENCES↗

Transition Metal Catalyzed Hydroarylation of Multiple Bonds: Exploration of Second Generation Ruthenium Catalysts and Extension to Copper Systems

Catalysts provide foundational technology for the development of new materials and can enhance the efficiency of routes to known materials. New catalyst technologies offer the possibility of reducing energy and raw material consumption as well as enabling chemical processes with a lower environmental impact. The rising demand and expense of fossil resources has strained national and global economies and has increased the importance of accessing more efficient catalytic processes for the conversion of hydrocarbons to useful products. The goals of the research are to develop and understand single-site homogeneous catalysts for the conversion of readily available hydrocarbons into useful materials. A detailed understanding of these catalytic reactions could lead to the development of catalysts with improved activity, longevity and selectivity. Such transformations could reduce the environmental impact of hydrocarbon functionalization, conserve energy and valuable fossil resources and provide new technologies for the production of liquid fuels. This project is a collaborative effort that incorporates both experimental and computational studies to understand the details of transition metal catalyzed C-H activation and C-C bond forming reactions with olefins. Accomplishments of the current funding period include: (1) We have completed and published studies of C-H activation and catalytic olefin hydroarylation by TpRu{l_brace}P(pyr){sub 3}{r_brace}(NCMe)R (pyr = N-pyrrolyl) complexes. While these systems efficiently initiate stoichiometric benzene C-H activation, catalytic olefin hydroarylation is hindered by inhibition of olefin coordination, which is a result of the steric bulk of the P(pyr){sub 3} ligand. (2) We have extended our studies of catalytic olefin hydroarylation by TpRu(L)(NCMe)Ph systems to L = P(OCH{sub 2}){sub 3}CEt. Thus, we have now completed detailed mechanistic studies of four systems with L = CO, PMe{sub 3}, P(pyr){sub 3} and P(OCH{sub 2}){sub 3}CEt, which has provided a comprehensive understanding of the impact of steric and electronic parameters of 'L' on the catalytic hydroarylation of olefins. (3) We have completed and published a detailed mechanistic study of stoichiometric aromatic C-H activation by TpRu(L)(NCMe)Ph (L = CO or PMe{sub 3}). These efforts have probed the impact of functionality para to the site of C-H activation for benzene substrates and have allowed us to develop a detailed model of the transition state for the C-H activation process. These results have led us to conclude that the C-H bond cleavage occurs by a {sigma}-bond metathesis process in which the C-H transfer is best viewed as an intramolecular proton transfer. (4) We have completed studies of Ru complexes possessing the N-heterocyclic carbene IMes (IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene). One of these systems is a unique four-coordinate Ru(II) complex that catalyzes the oxidative hydrophenylation of ethylene (in low yields) to produce styrene and ethane (utilizing ethylene as the hydrogen acceptor) as well as the hydrogenation of olefins, aldehydes and ketones. These results provide a map for the preparation of catalysts that are selective for oxidative olefin hydroarylation. (5) The ability of TpRu(PMe{sub 3})(NCMe)R systems to activate sp{sup 3} C-H bonds has been demonstrated including extension to subsequent C-C bond forming steps. These results open the door to the development of catalysts for the functionalization of more inert C-H bonds. (6) We have discovered that Pt(II) complexes supported by simple nitrogen-based ligands serve as catalysts for the hydroarylation of olefins. Given the extensive studies of Pt-based catalytic C-H activation, we believe these results will provide an entry point into an array of possible catalysts for hydrocarbon functionalization.

08 HYDROGEN↗

Diffusion bonding of IN 718 to VM 350 grade maraging steel

Diffusion bonding studies have been conducted on IN 718, VM 350 and the dissimilar alloy couple, IN 718 to maraging steel. The experimental processing parameters critical to obtaining consistently good diffusion bonds between IN 718 and VM 350 were determined. Interrelationships between temperature, pressure and surface preparation were explored for short bending intervals under vacuum conditions. Successful joining was achieved for a range of bonding cycle temperatures, pressures and surface preparations. The strength of the weaker parent material was used as a criterion for a successful tensile test of the heat treated bond. Studies of VM-350/VM-350 couples in the as-bonded condition showed a greater yielding and failure outside the bond region.

Crosby, S. R.↗