Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biodiesel”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Experimental study on the effect of nozzle hole-to-hole angle on the near-field spray of diesel injector using fast X-ray phase-contrast imaging

Fuel atomization and vaporization process play a critical role in determining the engine combustion and emission. The primary near-nozzle breakup is the vital link between the fuel emerging from the nozzle and the fully atomized spray. In this study, the near-nozzle spray characteristics of diesel injector with different umbrella angle (UA) were investigated using high-speed X-ray phase-contrast imaging and quantitative image processing. A classic ‘dumbbell’ profile of spray width (SW) composed of three stages: opening stage, semisteady stage and closing stage. The SW peak of two-hole injectors was more than twice of that of single-hole injector at the opening and closing stages, corresponding to the hollow-cone spray. This indicated the vortex flow was formed with the increase of the UA. The higher injection pressure had little influence on the SW while led to earlier breakup closer to the nozzle. Significant fuel effect on the SW at higher needle lift was found. However, this effect could be neglect at lower needle lift due to the leading role of internal flow and cavitation on the near-field spray characteristics. In addition, the morphology-based breakup process was observed, which highlighted the important effect of internal flow on the spray development. The possibility of using hollow-cone spray in diesel injector was also discussed.

biodiesel↗

Absolute cross-sections for dissociative photoionization of some small esters

The first measurements of absolute cross-sections for near-threshold molecular and dissociative photoionization are presented for 11 small esters (methyl formate, ethyl formate, vinyl acetate, methyl propanoate, ethyl propanoate, methyl butanoate, methyl isobutanoate, methyl propenoate, ethyl propenoate, methyl crotonate, and methyl methacrylate). Photoionization mass spectrometry (PIMS) is employed with an energy resolution of 40 meV (fwhm) using a monochromated VUV synchrotron light source. An extensive literature exploring isomerization/dissociation mechanisms is available for six of these molecules. There are, however, no previous observations of dissociative ionization for four simple monounsaturated esters (methyl propenoate, ethyl propenoate, methyl crotonate, and methyl methacrylate), and dissociative ionization of ethyl propanoate has received scant attention. Appearance energies for dissociative photofragment ions of these five molecules are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Better management practices for environmentally sustainable production of microalgae and algal biofuels

The commercialization of biofuels produced from microalgae is in its infancy; therefore, many resource-management practices and production processes are still flexible. The purpose of this paper is to guide development of supply chains toward more environmentally sustainable practices. Furthermore, in this work, we review current and projected technologies and practices for autotrophic microalgae cultivation that promote environmental sustainability. We develop a framework that leverages these studies to propose better management practices (BMPs) for water quality and quantity, biodiversity, or greenhouse gas emissions in concert with productivity and profitability considerations. Some proposed BMPs are linked to numerical environmental targets, such as percent reductions in nutrient loadings to streams, whereas others seek to avoid thresholds leading to adverse health or ecological effects. Still others involve using the best available technologies, developed iteratively through life-cycle and techno-economic analyses. Proposed BMPs for microalgae cultivation focus on water quality and quantity, as well as improving greenhouse gas (GHG) emissions to obtain advanced biofuel designation. BMPs must allow producers to meet productivity and profitability targets, as well as environmental targets. These example BMPs characterize the state of science and engineering; thus, they will change over time.

09 BIOMASS FUELS↗

Challenges and opportunities for alternative fuels in the maritime sector

Amidst a period of historic transformation, the marine shipping sector faces uncertainty regarding its ability to reliably fuel while remaining compliant with new international environmental regulations and targets. Increasingly stringent environmental standards, and heightened regulatory focus on maritime decarbonization are driving infrastructural and technical development for alternative fuels and mixtures, engine concepts, and operating practices. However, the transition to alternative fueling is highly complex and requires both a global outlook that spans diverse stakeholder demographics and coordination with multiple actors across the value chain. To aid stakeholders involved in decision making and research related to the transition, a scoping study was conducted with the goal of outlining the barriers, uncertainties, and possibilities in the short and long term for the transition. Synthesis of these results provides strategic decision support, technical direction, and a set of R&D priorities for maritime stakeholders and the scientific community.

09 BIOMASS FUELS↗

13 C Metabolic Flux Analysis of acetate conversion to lipids by Yarrowia lipolytica

We report volatile fatty acids (VFAs) are an inexpensive and renewable carbon source that can be generated from gas fermentation and anaerobic digestion of fermentable wastes. The oleaginous yeast Yarrowia lipolytica is a promising biocatalyst that can utilize VFAs and convert them into triacylglycerides (TAGs). However, currently there is limited knowledge on the metabolism of Y. lipolytica when cultured on VFAs. To develop a better understanding, we used acetate as the sole carbon source to culture two strains, a control strain and a previously engineered strain for lipid overaccumulation. For both strains, metabolism during the growth phase and lipid production phase were investigated by metabolic flux analysis using two parallel sodium acetate tracers. The resolved flux distributions demonstrate that the glyoxylate shunt pathway is constantly active and the flux through gluconeogenesis varies depending on strain and phase. In particular, by regulating the activities of malate transport and pyruvate kinase, the cells divert only a portion of the glyoxylate shunt flux required to satisfy the needs for anaplerotic reactions and NADPH production through gluconeogenesis and the oxidative pentose phosphate pathway (PPP). Excess flux flows back to the tricarboxylic acid (TCA) cycle for energy production. As with the case of glucose as the substrate, the primary source for lipogenic NADPH is derived from the oxidative PPP.

13C metabolic flux analysis↗

Rapid Analysis of Microalgal Triacylglycerols with Direct-Infusion Mass Spectrometry

Cultivation of microalgae has the potential to provide lipid-derived feedstocks for conversion to liquid transportation fuels. Lipid extracts from microalgae are significantly more complex than those of traditional seed oils, and their composition changes significantly throughout the microalgal growth period. With three acyl side chains per molecule, triglycerides (TAGs) are an important fuel precursor, and the distribution of acyl chain composition for TAGs has a significant impact on fuel properties and processing. Therefore, determination of the distribution of microalgal TAG production is needed to assess the value of algal extracts designed for fuel production and to optimize strain, cultivation, and harvesting practices. Methods utilized for TAG speciation commonly involve complicated and time-consuming chromatographic techniques. Here we present a method for TAG speciation and quantification based on direct-infusion mass spectrometry, which provides rapid characterization of TAG profiles without chromatographic separation. Specifically, we utilize Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to provide a reference library of TAGs for the microalgae Nannochloropsis sp. that provides the basis for high-throughput TAG quantitation by time-of-flight mass spectrometry (TOF MS). In conclusion, we demonstrate the application of this novel approach for lipid characterization with respect to TAG compound distribution, which informs both immediate and future strain and process optimization strategies.

09 BIOMASS FUELS↗

Identification of triacylglycerol remodeling mechanism to synthesize unusual fatty acid containing oils

Abstract Typical plant membranes and storage lipids are comprised of five common fatty acids yet over 450 unusual fatty acids accumulate in seed oils of various plant species. Plant oils are important human and animal nutrients, while some unusual fatty acids such as hydroxylated fatty acids (HFA) are used in the chemical industry (lubricants, paints, polymers, cosmetics, etc.). Most unusual fatty acids are extracted from non-agronomic crops leading to high production costs. Attempts to engineer HFA into crops are unsuccessful due to bottlenecks in the overlapping pathways of oil and membrane lipid synthesis where HFA are not compatible. Physaria fendleri naturally overcomes these bottlenecks through a triacylglycerol (TAG) remodeling mechanism where HFA are incorporated into TAG after initial synthesis. TAG remodeling involves a unique TAG lipase and two diacylglycerol acyltransferases (DGAT) that are selective for different stereochemical and acyl-containing species of diacylglycerol within a synthesis, partial degradation, and resynthesis cycle. The TAG lipase interacts with DGAT1, localizes to the endoplasmic reticulum (with the DGATs) and to puncta around the lipid droplet, likely forming a TAG remodeling metabolon near the lipid droplet-ER junction. Each characterized DGAT and TAG lipase can increase HFA accumulation in engineered seed oils.

59 BASIC BIOLOGICAL SCIENCES↗

Catalytic glycerol steam reforming for hydrogen production

Hydrogen production from glycerol by steam reforming combine two major advantages: (i) using glycerol as raw material add value to this by product of bio-diesel production which is obtained in large quantities around the world and have a very limited utilization now, and (ii) by implication of water molecules in the reaction the efficiency of hydrogen generation is increased as each mol of glycerol produces 7 mol of H{sub 2}. In this work we present the results obtained in the process of steam reforming of glycerol on Ni/Al{sub 2}O{sub 3}. The catalyst was prepared by wet impregnation method and characterized through different methods: N{sub 2} adsorption-desorption, XRD, TPR. The catalytic study was performed in a stainless steel tubular reactor at atmospheric pressure by varying the reaction conditions: steam/carbon ratio (1-9), gas flow (35 ml/min -133 ml/min), temperature (450-650°C). The gaseous fraction of the reaction products contain: H{sub 2}, CH{sub 4}, CO, CO{sub 2}. The optimum reaction conditions as resulted from this study are: temperature 550°C, Gly:H{sub 2}O ratio 9:1 and Ar flow 133 ml/min. In these conditions the glycerol conversion to gaseous products was 43% and the hydrogen yield was 30%.

08 HYDROGEN↗

The expression of genes encoding novel Sesame oleosin variants facilitates enhanced triacylglycerol accumulation in Arabidopsis leaves and seeds

Summary Triacylglycerols (TAG), accumulate within lipid droplets (LD), predominantly surrounded by OLEOSINs (OLE), that protect TAG from hydrolysis. We tested the hypothesis that identifying and removing degradation signals from OLE would promote its abundance, preventing TAG degradation and enhancing TAG accumulation. We tested whether mutating potential ubiquitin‐conjugation sites in a previously reported improved Sesamum indicum OLE ( SiO ) variant, o3‐3 Cys‐OLE ( SiCO herein), would stabilize it and increase its lipogenic potential. SiCOv1 was created by replacing all five lysines in SiCO with arginines. Separately, six cysteine residues within SiCO were deleted to create SiCOv2. SiCOv1 and SiCOv2 mutations were combined to create SiCOv3. Transient expression of SiCOv3 in Nicotiana benthamiana increased TAG by two‐fold relative to SiCO. Constitutive expression of SiCOv3 or SiCOv5 , containing the five predominant TAG‐increasing mutations from SiCOv3 , in Arabidopsis along with mouse DGAT2 ( mD ) increased TAG accumulation by 54% in leaves and 13% in seeds compared with control lines coexpressing SiCO and mD. Lipid synthesis rates increased, consistent with an increase in lipid sink strength that sequesters newly synthesized TAG, thereby relieving the constitutive BADC‐dependent inhibition of ACCase reported for WT Arabidopsis. These OLE variants represent novel factors for potentially increasing TAG accumulation in a variety of oil crops.

59 BASIC BIOLOGICAL SCIENCES↗

Biofuels combustion*

This review describes major features of current research in renewable fuels derived from plants and from fatty acids. Recent and ongoing fundamental studies of biofuel molecular structure, oxidation reactions, and biofuel chemical properties are reviewed, in addition to combustion applications of biofuels in the major types of engines in which biofuels are used. Biofuels and their combustion are compared with combustion features of conventional petroleum-based fuels. Two main classes of biofuels are described, those consisting of small, primarily alcohol, fuels (particularly ethanol, n-butanol, and iso-pentanol) that are used primarily to replace or supplement gasoline and those derived from fatty acids and used primarily to replace or supplement conventional diesel fuels. As a result, research efforts on so-called second- and third-generation biofuels are discussed briefly.

09 BIOMASS FUELS↗