Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BiO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nature-inspired lotus-shaped fins combined with hybrid nanoparticles and metal foam for high-performance latent heat thermal energy storage

Latent heat thermal energy storage (LHTES) systems play a critical role in renewable energy integration by providing high energy density and nearly isothermal operation during phase transitions. However, their performance is often limited by slow melting/charging rates, which motivates the search for enhanced heat transfer designs. This study investigates the melting behavior of RT-82 phase change material (PCM) using novel lotus-shaped fins combined with copper metal foam and conductive graphene nanoparticles and carbon nanotubes. A two-dimensional enthalpy-porosity model in ANSYS Fluent was developed to simulate the charging/melting process, capturing non-thermal equilibrium between the foam and PCM/nano-PCM. In this study, effects of fin geometry, nanoparticle concentration, and foam porosity on melting dynamics and cost-performance trade-offs were investigated. Results showed that natural convection accelerated melting by ~12% compared to conduction-only scenarios. Optimized lotus-shaped fins with higher fin density (T3F4 and T3F10) achieved up to 63% faster melting relative to sparse configurations. Graphene nanoparticles improved thermal conductivity, with a 6% volume fraction, by reducing melting time by ~6.9%, while their combination with 75% porosity foam achieved a maximum reduction in the melting time of ~51% compared to pure PCM. Cost-performance analysis identified T3F4 as the most balanced design, offering rapid thermal response without excessive material costs, while moderate-density designs like T3S6 provided economical alternatives with acceptable performance. These results highlight the performance enhancement that can be achieved by integrating bio-inspired fins, nanoparticles, and foams, into compact and efficient LHTES for solar heating, building thermal management, and industrial waste-heat recovery applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Deciphering Time-Dependent DNA Damage Complexity, Repair, and Oxygen Tension: A Mechanistic Model for FLASH-Dose-Rate Radiation Therapy

Irradiation with ultrahigh dose rates (FLASH) has reemerged as a promising radiation therapy approach to effectively lower potential damage burden on normal tissue without sacrificing tumor control. However, the large number of recent FLASH studies have been conducted under vastly different experimental conditions and circumstances (ie, investigated biological endpoint, radiation quality, and environmental oxygen level), with unverified biological mechanisms of action and unexplored interplay effect of the main dependencies. To facilitate radiobiological investigation of FLASH phenomena and assessment of clinical applicability, we present an extension of the mechanistic radiobiological model “UNified and VERSatile bio response Engine” (UNIVERSE).

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

From acetone fractionation to lignin-based phenolic and polyurethane resins

In this paper, acetone fractionation was used to increase the homogeneity of softwood kraft lignin for product development. The acetone soluble and insoluble fractions were analyzed in terms of elemental composition, chemical structure, and thermal properties. The phenolic hydroxyl content of the acetone soluble fraction increased by 24%. The acetone soluble fraction of kraft lignin was used to fully substitute phenol in phenolic resin formulation. The resulting formulated lignin-formaldehyde adhesive showed higher adhesion strength (4.3 MPa) compared to a lab formulated phenol-formaldehyde resin (3.4 MPa) with 100% wood failure after lap shear test. On the other hand, the acetone insoluble lignin fraction, which had 23% higher aliphatic hydroxyl content compared to the starting lignin, was used to entirely replace petroleum-based polyol in polyurethane resin formulation. Then a bio-derived solvent (dihydrolevoglucosenone, Cyrene) was used to dissolve the acetone insoluble lignin fraction to synthesize lignin-based polyurethane resin. Tailoring the structure of kraft lignin through solvent fractionation resulted in two fractions, which were used to replace 100% of two major petrochemicals (phenol and polyol) in the formulations of phenolic and PU resins, that would otherwise be challenging due to the heterogeneity of softwood kraft lignin.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineered Biosynthesis of Alkyne-Tagged Polyketides by Type I PKSs

Polyketides produced by modular polyketide synthases (PKSs) are important small molecules widely used as drugs, pesticides, and biological probes. Tagging these polyketides with a clickable functionality enables the visualization, diversification, and mode of action study through bio-orthogonal chemistry. We report the de novo biosynthesis of alkyne-tagged polyketides by modular type I PKSs through starter unit engineering. Specifically, we use JamABC, a terminal alkyne biosynthetic machinery from the jamaicamide B biosynthetic pathway, in combination with representative modular PKSs. We demonstrate that JamABC works as a trans loading system for engineered type I PKSs to produce alkyne-tagged polyketides. In addition, the production efficiency can be improved by enhancing the interactions between the carrier protein (JamC) and PKSs using docking domains and site-directed mutagenesis of JamC. This work thus provides engineering guidelines and strategies that are applicable to additional modular type I PKSs to produce targeted alkyne-tagged metabolites for chemical and biological applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Unraveling the regulation of sugar beet pulp utilization in the industrially relevant fungus Aspergillus niger

Efficient utilization of agro-industrial waste, such as sugar beet pulp, is crucial for the bio-based economy. The fungus Aspergillus niger possesses a wide array of enzymes that degrade complex plant biomass substrates, and several regulators have been reported to play a role in their production. The role of the regulators GaaR, AraR, and RhaR in sugar beet pectin degradation has previously been reported. However, genetic regulation of the degradation of sugar beet pulp has not been assessed in detail. In this study, we generated a set of single and combinatorial deletion mutants targeting the pectinolytic regulators GaaR, AraR, RhaR, and GalX as well as the (hemi-)cellulolytic regulators XlnR and ClrB to address their relative contribution to the utilization of sugar beet pulp. We show that A. niger has a flexible regulatory network, adapting to the utilization of (hemi-)cellulose at early timepoints when pectin degradation is impaired.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Screening and evaluation of biomass upgrading strategies for sustainable transportation fuel production with biomass-derived volatile fatty acids

Biomass conversion to fuels and chemicals is crucial to decarbonization, but choosing an advantageous upgrading pathway out of many options is challenging. Rigorously evaluating all candidate pathways (process simulation, product property testing) requires a prohibitive amount of research effort; even simple upgrading schemes have hundreds of possible permutations. We present a method enabling high-throughput screening by approximating upgrading unit operations and drop-in compatibility of products (e.g., fuel properties) and apply it to volatile fatty acid (VFA) conversion to liquid transportation fuels via a MATLAB script, VFA Upgrading to Liquid Transportation fUels Refinery Estimation (VULTURE). VULTURE selects upgrading configurations that maximize fuel blend bio-derived content. We validate VULTURE's approximations through surrogate fuel property testing and process simulation. Techno-economic and life cycle analyses suggest that VFA upgrading processes down-selected by VULTURE are profitable and have low carbon intensities, demonstrating the potential for the strategy to accelerate process development timelines at decreased costs.

09 BIOMASS FUELS↗
DOE OSTI2021

The role of biochar in the degradation of sugars during fast pyrolysis of biomass

With appropriate pretreatment, sugars can be a major product from fast pyrolysis of lignocellulosic biomass. Analytical pyrolysis of pure cellulose can produce up to 60 wt% yield of levoglucosan although yields are significantly lower in continuous pyrolysis at larger scales. Secondary reactions of vaporized levoglucosan are thought to be responsible for this loss of sugar yield, suggesting changes in the design and operation of pyrolysis reactors to minimize these reactions. Micropyrolysis experiments were performed to better understand the mechanism of sugar degradation in the presence of biochar. A 57% loss in levoglucosan yield was observed for cellulose overlain with untreated biochar powder compared to the pure cellulose control sample. The addition of biochar derived from pyrolysis of untreated corn stover to a fluidized bed pyrolyzer reduced sugar yields from cellulose from 61.3 wt% to 21.3 wt% and 41.5–11.6 wt% for conventional and autothermal operation, respectively. The significant drop in sugar yield due to biochar interaction inspired change in feeder configuration for the fluidized bed pyrolyzer to reduce vapor-char interactions. Biomass feeding was changed from in-bed to above-bed injection, which allowed significant devolatilization to occur above the layer of biochar that exists at the surface of the bed. Finally, by reducing secondary reactions, bio-oil and sugar yields increased by 7.9% and 14%, respectively, for autothermal pyrolysis.

09 BIOMASS FUELS↗
DOE OSTI2022

Effect of particle characteristics, kinetics and transport phenomena on the prediction of particle mass loss and products yields during biomass fast pyrolysis

Here a low computational cost model for the pyrolysis of biomass anisotropic particles was used to study the effect of thermal conductivity of the particle, CRECK kinetic scheme implementation, intraparticle secondary reactions, heats of reaction, and advection on particle conversion prediction. The model considers a shrinking anisotropic cylindrical particle with biomass pseudo-components, the appearance of liquid intermediates, intra-particle mass and heat transport and secondary reactions of volatiles. The model was validated against oak and birchwood single particle experiments. More accurate predictions for mass loss evolution are found when considering the change of the particle thermal conductivity anisotropy with conversion and the temperature dependency of the thermal conductivities of the biomass and the gas phase, compared to ignoring these phenomena. The CRECK biomass pyrolysis reaction scheme provides insights into the effect of biomass composition on the evolution of the liquid intermediate phase allowing future studies about the presence of heavy compounds in the bio-oil and other phenomena such as aerosol ejection. Secondary intraparticle vapor phase reactions showed a negligible effect in volatiles conversion while heterogeneous reactions slightly overestimate its conversion. Heats of reaction and product advection are important for accurate prediction of particle mass loss.

09 BIOMASS FUELS↗
DOE OSTI2024

Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar

The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.

09 BIOMASS FUELS↗
DOE OSTI2021

Oral delivery of a functional algal-expressed TGF-β mimic halts colitis in a murine DSS model

Inflammatory bowel disease (IBD) is a set of immunological disorders which can generate chronic pain and fatigue associated with the inflammatory symptoms. The treatment of IBD remains a significant hurdle with current therapies being only partially effective or having significant side effects, suggesting that new therapies that elicit different modes of action and delivery strategies are required. TGM1 is a TGF-β mimic that was discovered from the intestinal helminth parasite Heligmosomoides polygyrus and is thought to be produced by the parasite to suppress the intestinal inflammation response to help evade host immunity, making it an ideal candidate to be developed as a novel anti-inflammatory bio-therapeutic. Here we utilized the expression system of the edible green algae Chlamydomonas reinhardtii in order to recombinantly produce active TGM1 in a form that could be ingested. C. reinhardtii robustly expressed TGM1, and the resultant recombinant protein is biologically active as measured by regulatory T cell induction. When delivered orally to mice, the algal expressed TGM1 is able to ameliorate weight loss, lymphadenopathy, and disease symptoms in a mouse model of DSS-induced colitis, demonstrating the potential of this biologic as a novel treatment of IBD.

09 BIOMASS FUELS↗
DOE OSTI2022

Choices in land representation materially affect modeled biofuel carbon intensity estimates

Estimates of biofuel carbon intensity are uncertain and depend on modeled land use change (LUC) emissions. While analysts have focused on economic and agronomic assumptions affecting the quantity of land converted, researchers have paid less attention to how models classify land into broad categories and designate some categories as ineligible for LUC. To explore the effect of these land representation attributes, we use three versions of a global human and Earth systems model, GCAM, and compute the “carbon intensity of land-use change” (CI-LUC) from increased U.S. corn ethanol production. We consider uncertainty in model parameters along with the choice of land representation and find the latter is one of the most influential parameters on estimated CI-LUC. A version of the model that protects 90% of non-commercial land reduced estimated CI-LUC by an average of 32% across Monte Carlo trials compared to our baseline model. Another version that mimics the GTAP-BIO-ADV land representation, which protects all non-commercial land, reduced CI-LUC by an average of 19%. The results of this experiment suggest that analyses of LUC that exclude non-commercial land categories or assume more land is protected than empirically justified underestimate biofuel induced LUC GHG emissions.

09 BIOMASS FUELS↗
DOE OSTI2022

A consolidated bioprocess design to produce multiple high-value platform chemicals from lignocellulosic biomass and its technoeconomic feasibility

5-Hydroxymethyl furfural (HMF) and furfurals are DOE-listed platform chemicals that can be derived from the renewable carbon in the lignocellulosic biomasses and have the potential to replace petroleum-derived alter- natives. High substrate cost and use of expensive solvents limit the economic feasibility of bio-based HMF production on an industrially relevant scale. The study presents an experimental optimized condition that maximizes the chemical-free production of HMF and furfurals without lowering the yield of total fermentable sugars from Saccharum bagasse. Hydrothermal pretreatment at 210 °C for 15 min yielded approximately 10%, 12%, and 46% of HMF, furfurals, and fermentable sugars per gram of dry biomass, respectively. Additionally, the study proposes a consolidated bioprocess model to produce and recover four high-value bioproducts i.e., HMF, furfurals, ethanol, and acetic acid based on the experimental results and evaluates its technoeconomic feasibility considering HMF as the main product. The minimum selling price (MSP) of HMF was estimated to be 930.6 USD/ t which is competitive with its petroleum-derived precursor alternative p-xylene (1,113 USD/t). The sensitivity analysis performed for the process parameters suggests that pretreatment cost and revenues from coproducts immensely influence the MSP of HMF. The preliminary technoeconomic analysis performed on the consolidated bioprocess design indicates that additional revenue streams from diversified coproducts in biorefineries aid in lowering the MSP of high-value bioproducts.

09 BIOMASS FUELS↗
DOE OSTI2020

Metagenomic Alterations in Gut Microbiota Precede and Predict Onset of Colitis in the IL10 Gene-Deficient Murine Model

SUMMARY. Currently, predictive markers for the development andcourse of inflammatory bowel diseases (IBD) are not available. This study supports the notion that gut microbiome metagenomic profiles could be developed into a useful tool to assess risk and manage human IBD. BACKGROUND & AIMS: Inflammatory bowel diseases (IBD) are chronic inflammatory disorders where predictive bio-markers for the disease development and clinical course are sorely needed for development of prevention and early intervention strategies that can be implemented to improve clinical outcomes. Since gut microbiome alterations can reflect and/or contribute to impending host health changes, we examined whether gut microbiota metagenomic profiles would provide more robust measures for predicting disease outcomes in colitis-prone hosts. METHODS: Using the interleukin (IL) 10 gene-deficient (IL10KO) murine model where early life dysbiosis from antibiotic (cefoperozone [CPZ]) treated dams vertically transferred to pups increases risk for colitis later in life, we investigated temporal metagenomic profiles in the gut microbiota of post-weaning offspring and determined their relationship to even-tual clinical outcomes. RESULTS: Compared to controls, offspring acquiring maternalCPZ-induced dysbiosis exhibited a restructuring of intestinal microbial membership in both bacteriome and mycobiome that was associated with alterations in specific functional subsystems. Furthermore, among IL10 KO offspring fromCPZ-treated dams, several functional subsystems, particularly nitrogen metabolism, diverged between mice that developed spontaneous colitis (CPZ-colitis) versus those that did not (CPZ-no-colitis) at a time point prior to eventual clinical outcome. CONCLUSIONS: Our findings provide support that functional metagenomic profiling of gut microbes has potential and promise meriting further study for development of tools to assess risk and manage human IBD.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Ultra-low concentration terbium (Tb) adsorption on garlic peels biosorbent and its application for $\mathrm{Nd}$-$\mathrm{Fe}$-$\mathrm{B}$ scraps recovery

Motivated by the strategic value of middle-heavy rare earth elements (MHREEs), we proposed a bio-adsorption method to recover ultra-low concentration terbium (Tb(Ⅲ)) from industrial wastewater that originated from the Nd-Fe-B scraps recovery process. It could be found that Tb(Ⅲ) ions as low as 5.34 ng·mL -1 (ppb) could be adsorbed onto Ca(Ⅱ)-modified garlic peels (Ca-GP) within 10 min with the adsorption efficiency of 99.2% at pH 3.5. The adsorption behavior of Tb(Ⅲ) onto Ca-GP conformed the Langmuir isotherm model and pseudo-second-order kinetic model. Attenuated total reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS) and density-functional theory (DFT) calculations results showed that Tb(Ⅲ) ions could be ion-exchanged with cations in Ca-GP such as Ca(Ⅱ) and -COOH. In application, column experiment results showed that the maximum bed adsorption capacity for Tb, praseodymium (Pr), neodymium (Nd), dysprosium (Dy), and Total rare earth elements (REEs) ions calculated by the Thomas model was 0.06, 3.50, 9.65, 7.34, and 27.37 µg·g -1 , respectively, with the initial concentration of 0.37 ng·mL -1 Tb, 20 ng·mL -1 Pr, 44 ng·mL -1 Nd, 67 ng·mL -1 Dy and 170 ng·mL -1 total REEs ions of actual solutions (below the solubility of rare-earth hydroxide). Here this manuscript thus provided a novel cost-effective and efficient approach to the enrichment and recovery of MHREEs from ultra-low concentration REEs ions-containing solutions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

n-Butanol or isobutanol as a value-added fuel additive to inhibit microbial degradation of stored gasoline

Biofouling of gasoline can occur during fuel storage caused by bacteria and fungi that form a biofilm at a fuel/water interface and that produce organic acids and sulfides. Fuel additives are applied to gasoline to prevent biofouling but are relatively expensive, are not always effective against biofilms, and do not contribute to the combustibility of gasoline. Bio-isobutanol is an approved, certified advanced biofuel and is added up to 16% ( v/v ) in gasoline blends “iBut16”; n-butanol blends are currently under review. Microorganisms are inhibited by n-butanol or isobutanol when the aqueous concentration reaches >2-3% (w/ v ). We determined that n-butanol partitions into the aqueous phase of a model gasoline/water system reaching concentrations of 42 g/L and up to 48 g/L from gasoline blends at 10% and 24% ( v/v ), respectively. Likewise, isobutanol blended in gasoline at 10% and 24% ( v/v ) partitioned into an aqueous phase at 45 g/L and 53 g/L, respectively. Several bacterial and fungal strains that originate from fuel storage tanks, or are known to be solvent tolerant, were evaluated for their potential growth in a range of n- and isobutanol concentrations. Growth rates for all strains tested were reduced by 40–100% relative to untreated controls in n- and isobutanol concentrations of 1.5 and 2.0% ( v/v ). No observable growth occurred for any of the microorganisms in solvent concentrations at 3.0% ( v/v ). T amphiphilic and chaotropic properties of n- or isobutanol help them inhibit microbial growth and could serve as effective biocides during fuel storage as well as being valuable fuel additives.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Three-dimensional mapping of mineral in intact shark centra with energy dispersive x-ray diffraction

The centra of shark vertebrae consist of cartilage mineralized by a bioapatite similar to bone's carbonated hy-droxyapatite, and, without a repair mechanism analogous to remodeling in bone, these structures still survive millions of cycles of high-strain loading. The main structures of the centrum are an hourglass-shaped double cone and the intermedialia which supports the cones. Little is known about the nanostructure of shark centra, spe-cifically the relationship between bioapatite and cartilage fibers, and this study uses energy dispersive diffraction (EDD) with polychromatic synchrotron x-radiation to study the spatial organization of the mineral phase and its crystallographic texture. The unique energy-sensitive detector array at beamline 6-BM-B, the Advanced Photon Source, enables EDD to quantify the texture within each sampling volume with one exposure while constructing 3D maps via specimen translation across the sampling volume. Herein this study maps a centrum from two shark orders, a carcharhiniform and a lamniform, with different intermedialia structures. In the blue shark (Prionace glauca, Carcharhiniformes), the bioapatite's c-axes are oriented laterally within the centrum's cone walls but axially within the wide wedges of the intermedialia; the former is interpreted to resist lateral deformation, the latter to support axial loads. In the shortfin mako (Isurus oxyrinchus, Lamniformes), there is some tendency for c-axis variation with position, but the situation is unclear because one dimension of the sampling volume is consid-erably larger than the thickness and spacing of the intermedialia's radially-oriented lamellae. Because elastic modulus in collagen plus bioapatite mineralized tissues varies significantly with both volume fraction of bio-apatite and crystallographic texture, the present 3D EDD-derived maps should inform future 3D numerical models of shark centra under applied load.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Computation of conventional and alternative jet fuel sensitivity to lean blowout

Large Eddy Simulations (LES) are performed to compute the sensitivity of a conventional (A-2) and an alternate bio-jet (C-1) fuel to Lean Blowout (LBO). A realistic aviation gas turbine engine combustor configuration is considered. Reliable experimental LBO data and OH* chemiluminescence data for the conventional and alternate jet fuel in the combustor configuration have recently become available. The present work utilizes a highly automated, on-the-fly meshing strategy, along with adaptive mesh refinement, to demonstrate the feasibility of capturing the realistic combustion processes. A Lagrangian framework, with initial conditions specified using measurements of spray statistics, is used to model the fuel spray. Newly developed compact reaction mechanisms based on fuel surrogates are validated for the A-2 and the C-1 fuels. The compact reaction mechanisms are implemented using a detailed finite rate chemistry solver. Spray statistics computed by the present LES simulations compare well with available measurements at stable flame conditions near the lean blowout limit. The computed shape of the stable flame as represented by line integrated OH concentrations compares well with the experimental OH* chemiluminescence data. Lean blowout is reached by gradually decreasing the fuel flow rate in the computations, similar to that in the experiments. The results of the LES simulations effectively capture the fuel composition effects and estimate the sensitivity of the LBO limits to the fuel type. The computed trends in LBO limits agree within engineering accuracy with the experimental results for conventional and alternative aviation fuels. The methodology for predicting the fuel composition effects on the lean blowout limits in a fully resolved realistic, complex combustor is established for the first time.

Adaptive mesh refinement↗
DOE OSTI2026

Elucidating biodegradation of dimethyl terephthalate by two Rhodococcus strains for its valorization applications

Dimethyl terephthalate (DMT) serves as the precursor in the production of polyethylene terephthalate, polytrimethylene terephthalate, and polybutylene terephthalate. The widespread use of DMT in the polymer industry and its ubiquitous existence in end products raise alarms about its potential harm to humans and animals. DMT can enter the environment through the degradation of polymers and their end products, and cause endocrine disruption, oxidative stress, and an elevated risk of cancer. In recent years, DMT has also gained renewed interest in its potential for plastic recycling and upcycling. In this study, we identified two strains of Rhodococcus that possess DMT-degrading capabilities and utilized transcriptomic analysis and gene knockout to elucidate the mechanisms of DMT degradation. R. opacus PD630 and R. jostii RPET were found to convert up to 1 g/L DMT into mono-methyl terephthalate (MMT). A putative DMTase (RS34275) was identified for this conversion. R. jostii RPET also demonstrates the ability to convert DMT into MMT and to utilize MMT for its cellular growth via the terephthalate pathway. A putative MMTase (RS21885) as the sole enzyme was identified for the conversion of MMT into terephthalate in the RPET strain. In addition, we successfully produced lycopene and lipids from an engineered RPET strain using DMT as a substrate. Our findings will facilitate future DMT bioremediation and bio-upcycling of DMT-associated plastics, enabling the production of value-added products.

Biodegradation↗