Structure and Function of the Acetylpolyamine Amidohydrolase from the Deep Earth Halophile Marinobacter subterrani
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Several electron accepting polymers having weak accepting–strong accepting (WA-SA) and strong accepting–strong accepting (SA-SA) monomer alternation were synthesized for studies of structure/property relationship in all-polymer solar cells. Two kinds of cyclic amide monomers, 4,10-bis(2-butyloctyl)-thieno[2',3':5,6]pyrido[3,4-g]thieno-[3,2-c]isoquinoline-5,11-dione (TPTI) and 5,11-bis(2-butyloctyl)-thieno[2',3':4,5]pyrido[2,3-g]thieno[3,2-c]quinoline-4,10-dione (TPTQ), were synthesized as weak accepting monomers (WA). Difluorinated TPTQ (FTPTQ) and well-known perylene diimide (PDI) monomers were synthesized as strong electron accepting monomers (SA). By using 1-chloronaphthalene (CN) as a cosolvent, the morphology of the polymer blended films can be finely tuned to achieve better ordering toward face-on mode and favorable phase separation between electron donor and acceptor, resulting in significant enhancement of short circuit current (Jsc) and fill factor (FF). The fluorination in the TPTQ unit reduced the dipole moment of the D–A complex and gave a negative effect on a polymer system. PFP showed worse electron accepting property with lower electron mobility than PQP. It is reasoned that the internal polarization plays an important role in the design of electron accepting polymers. As a result, PQP having TPTQ monomer exhibited the best photovoltaic performance with power conversion efficiency (PCE) of 3.52% (Voc = 0.71 V, Jsc = 8.57 mA/cm2, FF = 0.58) at a weight ratio of PTB7-Th:PQP = 1:1, under AM 1.5G.
Inorganic–organic hybrid thin films synthesized by vapor-phase infiltration (VPI) of metal oxides into organic photoresists, such as poly(methyl methacrylate) (PMMA), have recently demonstrated their utility in extreme ultraviolet lithography, critical for angstrom-era semiconductor device miniaturization. Hafnium oxide infiltration has been reported recently for this purpose, but its detailed VPI mechanism has remained largely unexplored. In this study, we investigated the VPI characteristics and mechanisms of tetrakis(dimethylamido)hafnium (TDMAHf)─the hafnium precursor predominantly used for VPI in the field─into PMMA and examined its impact on electron-beam lithography (EBL) exposure behavior. VPI was performed at temperatures ranging from 85 to 150 °C, with chemical interactions characterized using infrared reflection-absorption spectroscopy, and resist patterning performance was evaluated through EBL dose-sensitivity assessments. The results indicate that TDMAHf forms a reversible adduct with PMMA at temperatures up to 120 °C, whereas at 150 °C, covalent bond formation occurs, most likely via dealkylation that leads to acetate formation. EBL studies reveal that resist sensitivity is influenced by both infiltration temperature and developer selection, with aqueous isopropyl alcohol development demonstrating enhanced sensitivity compared to organic solvent-based development. The optimized infiltration protocol at 120 °C ensures a uniform inorganic distribution without compromising resist dissolution. These findings not only help refine hybrid resist patterning performance but also offer insights potentially applicable to the VPI of other homoleptic metal-amide organometallic VPI precursors that include TDMA ligands.
The catalytic activity of a colloidal nanoparticle is typically inhibited by the very capping agents that are required to maintain colloidal stability and catalyst dispersion. Yet, the relative importance of steric contributions to the observed attenuation in catalytic activity is poorly understood. In this work, we prepare colloidal graphitic carbon nanoparticles featuring covalent amide linkages to aliphatic surface capping agents of varying length. Using aerobic benzylamine oxidation as a test reaction, we find that the steric profile of the ligand shell plays a negligible role in suppressing catalytic activity relative to chemisorption interactions that alter the surface chemistry of the catalyst. The work indicates that heterostructured nanoparticles that provide distinct surface sites for ligand binding and substrate activation should allow for high colloidal stability and robust catalytic activity.
Mineral-associated soil organic matter (SOM) is critical for stabilizing organic carbon and mitigating climate change. However, mineral-SOM interactions at the molecular scale, particularly synergetic adsorption through organic-organic interaction on the mineral surface known as organic multilayering, remain poorly understood. This study investigates the impact of organic multilayering on mineral-SOM interactions, by integrating macroscale experiments and molecular-scale simulations that assess the individual and sequential adsorption of major SOM compounds – lauric acid (lipid), pentaglycine (amino acid), trehalose (carbohydrate), and lignin onto soil minerals. Ferrihydrite, Al-hydroxide, and calcite are exposed to SOM compounds to determine adsorption affinities and binding energies. Results show that lauric acid has 20-40 times higher K d than pentaglycine, following the order K d (ferrihydrite) > K d (Al-hydroxide) >> K d (calcite). Molecular-scale simulations confirm that lauric acid has a higher binding energy (30.8 kcal/mol) on ferrihydrite than pentaglycine (6.0 kcal/mol), attributed to lipid hydrophobicity. The lower binding energy of pentaglycine results from its hydrophilic amide groups, facilitating partitioning into water. Sequential experiments examine how the first layer of lipid or amino acid affects the adsorption of carbohydrate/lignin, which show little or no individual adsorption affinities. Macroscale results reveal that lipid and amino acid adsorption induce ferrihydrite particle repulsion increasing reactive surface area and enhancing carbohydrate/lignin adsorption independently and synergistically through organic multilayering. Molecular-scale results reveal that amino acid adsorbed on ferrihydrite interacts more readily with lignin macroaggregates (preformed in solution) than with individual lignin units, indicating organic multilayering via H-bonding. Further, these findings reveal the molecular mechanisms of SOM-mineral interactions, crucial for enhancing soil carbon stabilization.
Natural organic matter is often associated with Fe(III) oxyhydroxides, and may be stabilized as a result of coprecipitation or sorption to their surfaces. However, the significance of this association in relation to Fe and C dynamics and biogeochemical cycling, and the mechanisms responsible for organic matter stabilization as a result of interaction with minerals under various environmental conditions (e.g., pH, Eh, etc.) are not entirely understood. The preservation of mineral-bound OM may be affected by OM structure and mineral identity, and bond types between OM and minerals may be central to influencing the stability, transformation and composition of both organic and mineral components under changing environmental conditions. Here we use bulk and submicron-scale spectroscopic synchrotron methods to examine the in situ transformation of OM-bearing, biogenic ferrihydrite stalks (Gallionella ferruginea-like), which formed following injection of oxygenated groundwater into a saturated alluvial aquifer at the Rifle, CO field site. A progression from oxidizing to reducing conditions during an eight-month period triggered the aging and reductive transformation of Gallionella-like ferrihydrite stalks to Fe (hydroxy)carbonates and Fe sulfides, as well as alteration of the composition and amount of OM. Spectromicroscopic measurements showed a gradual decrease in reduced carbon forms (aromatic/alkene, aliphatic C), a relative increase in amide/carboxyl functional groups and a significant increase in carbonate in the stalk structures, and the appearance of organic globules not associated with stalk structures. Biogenic stalks lost ~30% of their initial organic carbon content. Conversely, a significant increase in bulk organic matter accompanied these transformations. The character of bulk OM changed in parallel with mineralogical transformations, showing an increase in aliphatic, aromatic and amide functional groups. These changes likely occurred as a result of an increase in microbial activity, or biomass production under anoxic conditions. By the end of this experiment, a substantial fraction of organic matter remained in identifiable Fe containing stalks, but carbon was also present in additional pools, for example, organic matter globules and iron carbonate minerals.
Soil organic matter (SOM) is a key reservoir for global carbon (C), supporting soil fertility and influencing greenhouse gas emissions. Microbial residues, composed of dead cells and cellular fragments, are major contributors to SOM formation. Yet, mechanisms by which minerals enhance the accumulation of microbial residues remain poorly understood. Here, we used 13 C-labeled glucose in a year-long incubation to trace microbial residue in sandy and silty soils. Across both soils, approximately 89% of retained microbial 13 C was recovered in the fine (<53 μm) mineral-associated organic matter (MAOM) pool. Within this pool, the light MAOM fraction, enriched in poorly crystalline Fe minerals, held 4.3 times more 13 C than the heavy, phyllosilicate-dominated MAOM fraction, despite accounting for only 17.2% of the total MAOM mass and 12.3% of the total soil mass. Along with 13 C enrichment, the light MAOM fraction showed greater abundance of N-containing groups, e.g., (amides and amino groups), indicative of microbial-derived compounds like proteins and amino sugars. Fe oxides in light MAOM from both soils were spatially dispersed. Microbial residue accumulation was greater in finer-textured silty soil. These findings demonstrate that mineral composition and texture jointly regulate microbial necromass accrual, highlighting light MAOM as a key pool for enhancing soil C storage.
In this work, a series of ionic liquids with symmetric, macrocyclic cations composed of N-heterocycles connected by alkyl or ether linkages coupled with bis(trifluoromethylsulfonyl)imide or bis(pentafluoroethanesulfonyl)amide anions were synthesized to explore their application in CO 2 separation. These novel ionic liquids showed selective physical absorption of CO 2 compared to N 2 making them potential candidates for carbon capture. We examined the effect of cation structure on the physicochemical and separations properties of the ionic liquid and showed that these ionic liquids exhibit an inverse relationship between molar volume and CO 2 sorption capacity following the trend predicted by models based on regular solution theory. The fractional free volumes of the ionic liquids were lower than typical alkyl-imidazolium ionic liquids despite the cyclic structure of the cations which could be related to the flexibility of the alkyl and ether linkages. These results provide added insight into our understanding of structure–property relationships in CO 2 solubility in ionic liquids and afford a path toward enhancing the separations properties based on structure.
In subsurface imaging and oil recovery where temperatures and salinities are high, it is challenging to design polymer-coated nanoparticles with low retention (high mobility) in porous rock. Herein, the grafting of poly(2-acrylamido-2-methyl-1-propanesulfonic acid-$co$-acrylic acid) (poly(AMPS-$co$-AA)) on magnetic iron oxide nanoparticles was sufficiently uniform to achieve low adsorption on model colloidal silica and crushed Berea sandstone in highly concentrated API brine (8% NaCl and 2% CaCl 2 by weight). The polymer shell was grafted via amide bonds to an aminosilica layer, which was grown on silica-coated magnetite nanoparticles. The particles were found to be stable against aggregation in American Petroleum Institute (API) brine at 90 °C for 24 h. For IO nanoparticles with ~23% polymer content, Langmuir adsorption capacities on colloidal silica and crushed Berea Sandstone in batch experiments were extremely low at only 0.07 and 0.09 mg of IO/m 2 , respectively. Furthermore, upon injection of a 2.5 mg/mL IO suspension in API brine in a column packed with crushed Berea sandstone, the dynamic adsorption of IO nanoparticles was only 0.05 ± 0.01 mg/m 2 , which is consistent with the batch experiment results. The uniformity and high concentration of solvated poly(AMPS-$co$-AA) chains on the IO surfaces provided electrosteric stabilization of the nanoparticle dispersions and also weakened the interactions of the nanoparticles with negatively charged silica and sandstone surfaces despite the very large salinities.
Amidate-based ligands (N-(tert-butyl)isobutyramide, ITA) bind κ 2 to form homoleptic, 8-coordinate complexes with tetravalent 237 Np (Np(ITA) 4 , 1-Np) and 242 Pu (Pu(ITA) 4 , 1-Pu). These compounds complete an isostructural series from Th, U–Pu and allow for the direct comparison between many of the early actinides with stable tetravalent oxidation states by nuclear magnetic resonance (NMR) spectroscopy and single crystal X-ray diffraction (SCXRD). The molecular precursors are subjected to controlled thermolysis under mild conditions with the exclusion of exogenous air and moisture, facilitating the removal of the volatile organic ligands and ligand byproducts. The preformed metal–oxygen bond in the precursor, as well as the metal oxidation state, are maintained through the decomposition, forming fully stoichiometric, oxidation-state pure NpO 2 and PuO 2 . Powder X-ray diffraction (PXRD), scanning transmission electron microscopy (STEM), and energy dispersive X-ray spectroscopy (EDS) elemental mapping supported the evaluation of these high-purity materials. This chemistry is applicable to a wide range of metals, including actinides, with accessible tetravalent oxidation states, and provides a consistent route to analytical standards of importance to the field of nuclear nonproliferation, forensics, and fundamental studies.
Here, the rotation frequencies of amido ligands are highly sensitive to the electronic structure of d 0 transition metal complexes and have been used to study ligand donor properties. While attempting to study the donor properties of silanolate ligands in a silica-supported Cr complex, we observed highly restricted motions due to the added steric hindrance from the support, with only approximately half of the amides rotating on a 50 ms time scale. Surprisingly, when the same species is grafted into narrow 2.2 nm pores, all amido ligands are able to rotate. Density functional theory calculations suggest that confinement may limit the possible coordination sites and the configuration of the formed surface species, potentially enabling the formation of conformationally homogeneous surface site populations.
Here, potentiometric and spectroscopic techniques were used to evaluate the coordination behavior and thermodynamic features of trivalent f-element complexation by diethylenetriamine- N,N" -bis(acetylglycine)- N,N',N" -triacetic acid (DTTA-DAG) and its di(acetylglycine ethyl ester) analogue [diethylenetriamine- N,N" -bis(acetylglycine ethyl ester)- N,N',N" -triacetic acid (DTTA-DAGEE)]. Protonation constants and stability constants of trivalent lanthanide complexes (except Pm 3+ ) were determined by potentiometry. Six protonation sites and three metal–ligand complexes [ML 2– , MHL – , and MH 2 L(aq)] were quantified for DTTA-DAG. Four protonation sites and one metal–ligand complex [ML(aq)] were observed for DTTA-DAGEE, consistent with the presence of two ester groups. Absorption spectroscopy was utilized to measure the stability constants for complexation of trivalent neodymium and americium by DTTA-DAG and trivalent neodymium by DTTA-DAGEE. The coordination environment of trivalent europium in the presence of DTTA-DAG was investigated at various acidities by luminescence lifetime measurements. Decay constants indicate one water molecule in the inner coordination sphere across the 1.0 < pH < 5.5 range, presumably due to octadentate coordination by DTTA-DAG. A trans-lanthanide pattern of complex stabilities for DTTA-DAG was found to be analogous to that observed for DTPA, with a ~10 6 reduction of the complex stability. The lessened strength of complexation, relative to DTPA, was attributed to significant reduction of the total ligand basicity for DTTA-DAG due to the electronic influence of amide functionalization. When DTTA-DAG is used as an aqueous holdback complexant in liquid–liquid distribution experiments, the preferential coordination of Am 3+ in the aqueous environment offers efficient An/Ln differentiation. The separation extends to pH 2 conditions, where the kinetics of phase transfer in such liquid–liquid systems are aided by the acid-catalyzed dissociation of a metal/aminopolycarboxylate complex.
Nanosized SrSnO 3 photocatalysts have been successfully synthesized by microwave synthesis in various ionic liquids (ILs) followed by a heat treatment process to optimize the materials’ crystallinity. The influence of the ILs with various cations such as 1-butyl-3-methylimidazolium ([C 4 mim] + ), 6-bis(3-methylimidazolium-1-yl)hexane ([C 6 (mim) 2 ] 2+ ), butylpyridinium ([C 4 Py] + ), and tetradecyltrihexylphosphonium ([P 66614 ] + ) and bis(trifluoromethanesulfonyl)amide ([Tf 2 N] - ) as the anion on the structure, crystallization, and morphology of the products was investigated. The samples were characterized by X-ray diffraction (XRD), thermogravimetry (TG), scanning electron microscopy (SEM), surface area analysis by gas adsorption, X-ray photoelectron spectroscopy (XPS), diffuse reflectance UV–vis spectroscopy, and Raman and IR spectroscopy. According to structure characterization by XRD and Raman spectroscopy all samples crystallized phase-pure in the orthorhombic GdFeO 3 perovskite structure type. SEM reveals that, on the basis of the IL, the obtained SrSnO 3 nanoparticles exhibit different morphologies and sizes. Rod-shaped particles are formed in [C 4 mim][Tf 2 N], [C 6 (mim) 2 ][Tf 2 N] 2 , and [P 66614 ][Tf 2 N]. However, the particle dimensions and size distribution vary depending on the IL and range from quite thin and long needlelike particles with a narrow size distribution obtained in [P 66614 ][Tf 2 N] to relatively larger particles with a broader size distribution obtained in [C 6 (mim) 2 ][Tf 2 N] 2 . In contrast, in [C 4 Py][Tf 2 N] nanospheres with a diameter of about 50 nm form. For these particles the highest photocatalytic activity was observed. Our investigations indicate that the improved photocatalytic activity of this material results from the synergistic effect of the relatively large surface area associated with nanosize and an appropriate energy band structure.
We report that one-pot reactions between the [Mn 3 O(O 2 CPh) 6 (py) x ] +/o triangular precursors and either CaBr 2 ·xH 2 O or CaCl 2 ·6H 2 O, in the presence of salicylhydroxamic acid (shaH 2 ), have afforded the heterometallic complexes [MnIII 4 Ca 2 (O 2 CPh) 4 (shi) 4 (H 2 O) 3 (Me 2 CO)] ( 1 ) and (pyH)[Mn II 2 Mn III 4 Ca 2 Cl 2 (O 2 CPh) 7 (shi) 4 (py) 4 ] ( 2 ), respectively, in good yields. Further reactions but using a more flexible synthetic scheme comprising the Mn(NO 3 ) 2 · 4 H 2 O/Ca(NO 3 ) 2 · 4 H 2 O and Mn(O 2 CPh) 2 · 2 H 2 O/Ca(ClO 4 ) 2 · 4 H 2 O "metal blends" and shaH 2 , in the presence of external base NEt 3 , led to the new complexes (NHEt 3 ) 2 [Mn III 4 Mn IV 4 Ca(OEt) 2 (shi) 10 (EtOH) 2 ] ( 3 ) and (NHEt 3 ) 4 [Mn III 8 Ca 2 (CO 3 ) 4 (shi) 8 ] ( 4 ), respectively. In all reported compounds, the anion of the tetradentate (N,O,O,O)-chelating/bridging ligand salicylhydroxime (shi 3- ), resulting from the in situ metal-ion-assisted amide-iminol tautomerism of shaH 2 , was found to bridge both Mn and Ca atoms. Complexes 1-4 exhibit a variety of different structures, metal stoichiometries, and Mn oxidation-state descriptions; 1 possesses an overall octahedral metal arrangement, 2 can be described as a Mn 4 Ca 2 octahedron bound to an additional Mn 2 unit, 3 consists of a Mn 8 "ring" surrounding a Ca II atom, and 4 adopts a rectangular cuboidal motif of eight Mn atoms accommodating two CaIIatoms. Solid-state direct-current magnetic susceptibility studies revealed the presence of predominant antiferromagnetic exchange interactions between the Mn centers, leading to S = 0 spin ground-state values for all complexes. Lastly, from a bioinorganic chemistry perspective, the reported compounds may demonstrate some relevance to both high-valent scheme ( 3 ) and lower-oxidation-level species ( 1, 2, and 4 ) of the catalytic cycle of the oxygen-evolving complex.
Complexation of Np(V) with three structurally related amine-functionalized diacetamide ligands, including 2,2'-azanediylbis( N, N'-dimethylacetamide) (ABDMA), 2,2'-(methylazanediyl)bis( N, N'-dimethylacetamide) (MABDMA), and 2,2'-(benzylazanediyl)bis( N, N'-dimethylacetamide) (BnABDMA), in aqueous solutions was investigated. The stability constants of two successive complexes, namely, NpO 2 L + and NpO 2 L 2 + , where L stands for the ligands, were determined by absorption spectrophotometry. The results suggest that the stability constants of corresponding Np(V) complexes follow the trend: MABDMA > ABDMA ≈ BnABDMA. The data are discussed in terms of the basicity of the ligands and compared with those for the complexation of Np(V) with an ether oxygen-linked diacetamide ligand. Extended X-ray absorption fine structure data indicate that, similar to the complexation with Nd 3+ and UO 2 2+ , the ligands coordinate to NpO 2 + in a tridentate mode through the amine nitrogen and two oxygen atoms of the amide groups. Furthermore, computational results, in conjunction with spectrophotometric data, verify that the 1:2 complexes (NpO 2 (L) 2 + ) in aqueous solutions are highly symmetric with Np at the inversion center, so that the f-f transition of Np(V) is forbidden and NpO 2 (L) 2 + does not display significant absorption in the near-IR region.
Thermodynamic properties of the complexation of 2,2'-(trifluoroazanediyl)bis(N,N'-dimethylacetamide) (CF 3 ABDMA) with U(VI), Nd(III), and Np(V) have been studied in 1.0 M NaNO 3 at 25 °C. Equilibrium constants of the complexation were determined by potentiometry and spectrophotometry. In comparison with a series of structurally related amine-bridged diacetamide ligands, including 2,2'-(benzylazanediyl)bis(N,N'-dimethylacetamide) (BnABDMA), 2,2'-azanediylbis(N,N'-dimethylacetamide) (ABDMA), and 2,2'-(methylazanediyl)bis(N,N'-dimethylacetamide) (MABDMA), CF 3 ABDMA forms weaker complexes with U(VI), Nd(III), and Np(V) due to the lower basicity of the center N atom in CF 3 ABDMA resulting from the attachment of the strong electron-withdrawing CF 3 - moiety. The complexation strength of CF 3 ABDMA with the three metal ions follows the order: UO 2 2+ > Nd 3+ > NpO 2 + , consistent with the order of the “effective” charges of the metal ions. Structural information on the U(VI)/CF 3 ABDMA complexes in solution and in solid was obtained by theoretical computation, single crystal X-ray diffractometry, 19 F NMR, and electrospray ionization mass spectrometry. Finally, the structural data indicate that, similar to the three previously studied amine-bridged diacetamide ligands (BnABDMA, ABDMA, and MABDMA), the CF 3 ABDMA ligand coordinates to UO 2 2+ in a tridentate mode, through the center nitrogen and the two amide oxygen atoms.
The high-pressure vapor-liquid equilibrium for the binary systems of carbon dioxide (CO 2 ) and a series of 1-alkyl-1-methyl pyrrolidinium bis(trifluoromethylsulfonyl)amide ionic liquids ([C n C 1 pyr][NTf 2 ] ( n = 3,4,6)) are reported at 298.15, 318.15 and 338.15 K and at pressures up to 20 MPa. Experiments were conducted using gravimetric (IGA and XEMIS microbalances) and a volumetric method (high-pressure view cell). The solubility of CO 2 in pyrrolidinium ionic liquids increases with decreasing temperature and increasing pressure. The CO 2 solubility also slightly increases with increase in alkyl chain length on the pyrrolidinium cation. Molar volume and volume expansion of CO 2 + IL mixtures are also reported. The Fickian diffusion of CO 2 in pyrrolidinium based ionic liquids (~10 -10 m 2 ·s -1 ) was calculated at pressures of up to 2 MPa and found to be at the same order of magnitude but slightly lower than the diffusivity of CO 2 in imidazolium based ionic liquid with the [NTf 2 ] anion.
Abstract The B cell lymphoma 2 (Bcl-2) family of proteins are key regulators of intrinsic apoptosis. The antiapoptotic protein myeloid cell leukemia 1 (Mcl-1), which is associated with high tumor grade, poor survival, and resistance to treatment, has emerged as a promising candidate for treating hematological and solid cancers. Herein, we report the structure-guided design of small molecule macrocyclic Mcl-1 inhibitors based on the (R)-methyl-dihydropyrazinoindolone scaffold our group has previously disclosed. The macrocyclic inhibitors bind Mcl-1 with subnanomolar affinity and offer improved potency in cell culture growth inhibition assays. Inhibitor 13 achieved tumor regression in a lung cancer-derived tumor xenograft model in mice as a monotherapy. The improved potency of the macrocyclic series allowed replacement of heretofore conserved indole carboxylic acid moiety, resulting in neutral inhibitors. Amide inhibitor 25 displayed a >10-fold increase in oral bioavailability as compared to acid-containing macrocyclic or acyclic inhibitors.