Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Air traffic control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

A Queuing Theory Approach to Pilot-Controller Coordination for m:N Operations

In recent years, attention and interest by industry and researchers has grown in a control paradigm for remotely piloted aircraft termed “m:N operations.” In an m:N operation, a team of m remote pilots in command (RIPCs) collaboratively manage the flights of N aircraft. A consequence of an m:N concept of operations is that the RPICs will have to switch attention from one aircraft to another and from one task to another. Previous research in m:N operations has focused on the workload experienced by an RPIC and their level of situation awareness on their flights. Researchers have found that RPIC workload and situation awareness are generally sensitive to increasing N, although NASA’s Multi-Vehicle (m:N) Working Group has suggested that the driver of workload/situation awareness is the number of exceptions requiring human intervention as opposed to the value of N itself. In any case, a natural antecedent of workload is task load. In this paper, queueing theory is applied to a 1:N Urban Air Mobility (UAM) air taxi operation in order to estimate pilot task load for managing radio communications with air traffic controllers (ATCs) under increasing N. An M/M/1 queueing system is used to model the RIPC’s servicing of calls and clearance requests (e.g., departure, arrival, or airspace transition) to ATC for the N aircraft. Important parameters for the queueing model are the task arrival rate and the average service time for task completion. Radio communication times from past human-in-the-loop simulation studies are used to measure service times for a 1:4 and 1:12 UAM operation and to interpolate service times for 4 < N < 12. A Monte Carlo method is then employed, using the measured and interpolated service times, to estimate arrival rate and related queueing statistics. The paper concludes by considering the estimated queuing statistics, particularly the RPIC’s utilization (i.e., proportion of time actively servicing tasks), the length of the task queue over time, and the implications for task-balanced system design.

task load↗
NASA NTRSDate not supplied

The Viability of See and Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for UAM

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRSDate not supplied

The Viability of See-and-Avoid for Midair Collision Avoidance for Urban Air Mobility (UAM)

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRS2023

The Viability of See-and-Avoid for Urban Air Mobility Operations

Urban Air Mobility (UAM) is an emerging aviation concept that could supplement today’s ground and air transportation systems. For UAM, it is generally assumed that the private sector will manage separation and not rely on the Federal Aviation Administration air traffic control system. To date, discussions of initial operations focus on using the visual abilities of the pilot to “see and avoid” (SAA) other aircraft. Decades of research on SAA has demonstrated that it is inadequate for reliable detection of aircraft that might pose a collision risk. The literature on multi-object tracking is also reviewed for findings on how well humans can visually track objects. The research shows that humans have limited resources for tracking and that this may be affected by object characteristics and cognitive skills. The conclusion is that SAA is a risky method for avoiding midair collisions. It is recommended that flight deck displays and automated collision avoidance systems be implemented for all UAM aircraft at the outset of their introduction.

urban air mobility↗
NASA NTRS2018

Operational Impact of the Baseline Integrated Arrival, Departure, and Surface System Field Demonstration

To address the Integrated Arrival, Departure, and Surface (IADS) challenge, NASA is developing and demonstrating trajectory-based departure automation under a collaborative effort with the FAA and industry known as Airspace Technology Demonstration 2 (ATD-2). ATD-2 builds upon and integrates previous NASA research capabilities that include the Spot and Runway Departure Advisor (SARDA), the Precision Departure Release Capability (PDRC), and the Terminal Sequencing and Spacing (TSAS) capability. The ATD-2 field demonstration is organized into three phases. Phase I illustrates a Baseline IADS demonstration and includes all components of ATD-2 running in operational environments. Subsequent phases will fuse together strategic scheduling components as well as take into account metroplex considerations. This paper describes the baseline IADS system that was deployed at the end of 2017 and is continuing to run as part of the ATD-2 demonstration taking place at Charlotte-Douglas International Airport (CLT). The primary areas of deployment and system use are in the CLT Air Traffic Control Tower, CLT TRACON, CLT American Airlines ramp tower, Washington Center facility and American Airlines Integration Operations Center (IOC). In addition to describing the functions and capabilities that are part of the baseline IADS system, this paper also provides metrics regarding operational use as well as initial benefits metrics. Benefit metrics continue to be collected and aggregated across the areas of system delay, throughput, taxi time, fuel burn savings, and emissions savings. Furthermore, benefits as a result of common awareness of delays and the impact of takeoff and departure restrictions stemming from traffic flow management initiatives are described. The overall benefit of improved predictability and efficiency as a result of the baseline IADS system demonstration is also discussed.

operational system↗
NASA NTRSDate not supplied

Predicting Airport Runway Configuration for Decision-Support Using Supervised Learning

One of the most challenging tasks for air traffic controllers is runway configuration management (RCM). It deals with the optimal selection of runways to operate on (for arrivals and departures) based on current and forecast of traffic, surface wind speed, wind direction, other environmental variables, noise constraints, and several other airport-specific factors. In this paper, a methodology using supervised learning is developed to build a predictive model for RCM decision-support from large volumes of historical data. Data from two full years (2018 and 2019) related to current and forecast weather, demand/capacity, etc. is collected, analyzed, and fused together. A variety of supervised learning algorithms are tested for predicting runway configuration and hyperparameter tuning is carried out to select the best performing model. The validation process involves two airports of low (Charlotte Douglas International Airport, CLT) and high (Denver International Airport, DEN) complexity of configuration decision-making. The results show significant promise for the two airports with test accuracy of 93% (CLT) and 73% (DEN). The methodology is scalable and generalizable to other airports across the U.S. National Airspace System.

air traffic management↗
NASA NTRSDate not supplied

Predicting Airport Runway Configurations for Decision-Support Using Supervised Learning

One of the most challenging tasks for air traffic controllers is runway configuration management (RCM). It deals with the optimal selection of runways to operate on (for arrivals and departures) based on current and forecast of traffic, surface wind speed, wind direction, other environmental variables, noise constraints, and several other airport-specific factors. In this paper, a methodology using supervised learning is developed to build a predictive model for RCM decision-support from large volumes of historical data. Data from two full years (2018 and 2019) related to current and forecast weather, demand/capacity, etc. is collected, analyzed, and fused together. A variety of supervised learning algorithms are tested for predicting runway configuration and hyperparameter tuning is carried out to select the best performing model. The validation process involves two airports of low (Charlotte Douglas International Airport, CLT) and high (Denver International Airport, DEN) complexity of configuration decision-making. The results show significant promise for the two airports with test accuracy of 93% (CLT) and 73% (DEN). The methodology is scalable and generalizable to other airports across the U.S. National Airspace System.

air traffic management↗
NASA NTRSDate not supplied

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

In the concept envisioned for Urban Air Mobility (UAM) operations, fleets of electric vertical takeoff and landing (eVTOL) vehicles would operate between vertiports distributed within a densely populated area. These operations would be largely independent from the existing air traffic control system and would place the responsibility for flight planning and aircraft separation on fleet operators. The fourth major level on the UAM Maturity Level scale, UML-4, relies on “collaborative and responsible” automation to enable operations in non-visual conditions with medium traffic density (hundreds of aircraft in one metropolitan region) and medium complexity. This level of service places many requirements on automation systems to assist the operators of these aircraft. NASA has developed the Autonomous Operations Planner (AOP), a reference prototype Flight Path Management automation system, and has modified AOP to support research of anticipated UML-4 operations. AOP creates a four-dimensional flight plan conforming to the constraints of these operations, evaluates and modifies the flight plan during flight as conditions and constraints evolve, and coordinates the flight plan with other airspace users and with service providers. This version of AOP has been integrated into the Sikorsky Autonomy Research Aircraft and used in a flight test activity. In this paper we discuss anticipated characteristics of UAM operations, modifications that were made to AOP to adapt to that environment or to support the flight test, and observations of software and aircraft performance during the flight test. The aircraft achieved four-dimensional conformance with the flight plan and AOP provided adequate planning in almost all cases. We discuss improvements that could be made to AOP to address deficiencies that were observed.

Autonomous Operations Planner↗
NASA NTRSDate not supplied

An Experimental System for Strategic Flight Path Management in Advanced Air Mobility

In the concept envisioned for Urban Air Mobility (UAM) operations, fleets of electric vertical takeoff and landing (eVTOL) vehicles would operate between vertiports distributed within a densely populated area. These operations would be largely independent from the existing air traffic control system and would place the responsibility for flight planning and aircraft separation on fleet operators. The fourth major level on the UAM Maturity Level scale, UML-4, relies on “collaborative and responsible” automation to enable operations in non-visual conditions with medium traffic density (hundreds of aircraft in one metropolitan region) and medium complexity. This level of service places many requirements on automation systems to assist the operators of these aircraft. NASA has developed the Autonomous Operations Planner (AOP), a reference prototype Flight Path Management automation system, and has modified AOP to support research of anticipated UML-4 operations. AOP creates a four-dimensional flight plan conforming to the constraints of these operations, evaluates and modifies the flight plan during flight as conditions and constraints evolve, and coordinates the flight plan with other airspace users and with service providers. This version of AOP has been integrated into the Sikorsky Autonomy Research Aircraft and used in a flight test activity. In this paper we discuss anticipated characteristics of UAM operations, modifications that were made to AOP to adapt to that environment or to support the flight test, and observations of software and aircraft performance during the flight test. The aircraft achieved four-dimensional conformance with the flight plan and AOP provided adequate planning in almost all cases. We discuss improvements that could be made to AOP to address deficiencies that were observed.

Autonomous Operations Planner↗
NASA NTRS2004

Toward Synthesis, Analysis, and Certification of Security Protocols

Implemented security protocols are basically pieces of software which are used to (a) authenticate the other communication partners, (b) establish a secure communication channel between them (using insecure communication media), and (c) transfer data between the communication partners in such a way that these data only available to the desired receiver, but not to anyone else. Such an implementation usually consists of the following components: the protocol-engine, which controls in which sequence the messages of the protocol are sent over the network, and which controls the assembly/disassembly and processing (e.g., decryption) of the data. the cryptographic routines to actually encrypt or decrypt the data (using given keys), and t,he interface to the operating system and to the application. For a correct working of such a security protocol, all of these components must work flawlessly. Many formal-methods based techniques for the analysis of a security protocols have been developed. They range from using specific logics (e.g.: BAN-logic [4], or higher order logics [12] to model checking [2] approaches. In each approach, the analysis tries to prove that no (or at least not a modeled intruder) can get access to secret data. Otherwise, a scenario illustrating the &tack may be produced. Despite the seeming simplicity of security protocols ("only" a few messages are sent between the protocol partners in order to ensure a secure communication), many flaws have been detected. Unfortunately, even a perfect protocol engine does not guarantee flawless working of a security protocol, as incidents show. Many break-ins and security vulnerabilities are caused by exploiting errors in the implementation of the protocol engine or the underlying operating system. Attacks using buffer-overflows are a very common class of such attacks. Errors in the implementation of exception or error handling can open up additional vulnerabilities. For example, on a website with a log-in screen: multiple tries with invalid passwords caused the expected error message (too many retries). but let the user nevertheless pass. Finally, security can be compromised by silly implementation bugs or design decisions. In a commercial VPN software, all calls to the encryption routines were incidentally replaced by stubs, probably during factory testing. The product worked nicely. and the error (an open VPN) would have gone undetected, if a team member had not inspected the low-level traffic out of curiosity. Also, the use secret proprietary encryption routines can backfire, because such algorithms often exhibit weaknesses which can be exploited easily (see e.g., DVD encoding). Summarizing, there is large number of possibilities to make errors which can compromise the security of a protocol. In today s world with short time-to-market and the use of security protocols in open and hostile networks for safety-critical applications (e.g., power or air-traffic control), such slips could lead to catastrophic situations. Thus, formal methods and automatic reasoning techniques should not be used just for the formal proof of absence of an attack, but they ought to be used to provide an end-to-end tool-supported framework for security software. With such an approach all required artifacts (code, documentation, test cases) , formal analyses, and reliable certification will be generated automatically, given a single, high level specification. By a combination of program synthesis, formal protocol analysis, certification; and proof-carrying code, this goal is within practical reach, since all the important technologies for such an approach actually exist and only need to be assembled in the right way.

Schumann, Johann↗
NASA NTRS2022

National Campaign (NC)-1 Strategic Conflict Management Simulation (X4) Community Based Rules

Projected demand for transportation services in the urban environment has led to the development of several Concepts of Operation for Urban Air Mobility, or UAM. UAM is a concept for the transportation of people and goods in the metropolitan environment using small, efficient aircraft over short distances as part of an expanding multimodal transportation network. UAM will leverage emerging technologies including electric Vertical Takeoff and Landing (eVTOL) aircraft, increasing levels of automation and a new operational paradigm in dense airspace where a set of agreed-upon rules govern the procedures and interactions defining a cooperative environment in which operators are entrusted with a range of functions typically conducted by Air Traffic Control (ATC). These rules, proposed in the FAA NextGen Office’s UAM Concept of Operations [1], were originally termed Community Based Rules or Community Business Rules (CBRs), and will in the future termed Cooperative Operating Practices (COPs); this document uses the original term, CBR. CBRs are a set of rules, developed by the UAM community and (where necessary) approved by the FAA that govern the interactions between UAM entities and limit the need for ATC services including, but not limited to, separation control by ATC, addressing a fundamental challenge to scaling UAM operations. UAM community development of CBRs is anticipated to accelerate the adoption of new practices while retaining the regulatory authority of the FAA within required domains (e.g., NAS safety, security and equal access). However, there currently exists no agreed industry forum or defined procedures for CBR development. Investigation of best practices for the development of UAM CBRs was identified by NASA and the FAA NextGen Office as a research need. In collaboration with seven industry partners, NASA participated in a series of simulations that investigated elements of the envisioned UAM operations, with a primary focus on Strategic Conflict Management (SCM). The development and conduct of cooperative UAM simulations with seven industry partners provided a unique opportunity to investigate CBR development practices. Development of CBRs for the UAM SCM simulations was conducted in parallel with simulation capability development and was closely related to requirements definition for the simulations. As such, the CBR development effort presented herein had two objectives: explore CBR development practices in collaboration with the industry partners and develop an initial set of UAM CBRs to support simulation requirements definition and development. Consensus was achieved among NASA and the industry partners on 24 CBRs that were developed to support the cooperative simulation operations across five topic areas: General (related to test requirements), Operational Intent, Conformance Monitoring, Demand Capacity Balancing, and Airspace Constraint Management. Additional topic areas and CBRs were discussed but were deemed outside the scope of the simulation; these are included in the appendices. A collaborative, iterative process was employed for developing the CBRs engaging both NASA and Industry; because CBR development is envisioned to be community-driven, opportunities were sought that provided industry partners leadership roles in developing CBRs. The following key observations and recommendations may aid the UAM industry in future CBR development efforts: - The lack of a defined process proved challenging initially. Stakeholder engagement in the early stages of CBR development was intermittent and may have been due to the lack of a clear definition of roles and responsibilities of those involved in the effort. - Industry leadership of CBR topic areas proved successful. Discussions in these topic areas were engaging, with alternate viewpoints freely discussed and detailed CBRs resulting. This points to the importance of identifying the best-suited leadership in technical areas for CBR development. - Discussions within a CBR topic area were typically dominated by only a few participants. Whereas all industry partners contributed to CBR development, within each topic area, technical leadership was evident even when not formally established. This observation may indicate that smaller, focused groups may be more effective in initial CBR development than an open forum or large standards development effort (although both maybe required prior to FAA review and approval for some CBRs). - Identifying suitable forums for initial UAM CBR development and identifying the most effective industry participants and leadership will be crucial for successful CBR development. Although the operational need for UAM CBRs may not be immediate, establishing the forums and leadership to define the processes for CBR development is a prudent early step to UAM realization.

Community Based Rules↗
DOE OSTI2023

Micromovements and discomfort associated with flight mission with helmet operation tasks with different levels of cognitive workload

When performing stationary tasks under elevated cognitive workload, individuals must perform continual muscle contractions to maintain stability of the body, resulting in fatigue of the postural muscles. When the muscles perform these contractions in a prolonged manner, the body potentially responds through small changes in body movements—micromovements that may lead to discomfort. The study purpose was to evaluate impact of cognitive load on micromovements. The micromovements were measured during three different cognitive workloads; low, medium, and high. The NASA-TLX score was used to evaluate the perceived mental workload and discomfort was assessed by visual analog scale. In total, 60 subjects (30 males and 30 females) were recruited and performed cognitive tasks that simulated flight operations such as changing the radio frequency based on air traffic control messages, balancing the fuel levels in simulated fuel tanks, and aiming a reticle in a designated moving target using the cyclic control. Cognitive load was defined by the frequency of events. Micromovements were defined by changes in the center of pressure (COP) of the seat pan and COP standard deviation. It was found that the high cognitive workloads had the highest NASA-TLX scores including mental demands, temporal demands, and effort. The neck area had the highest overall levels of discomfort followed by upper back. The highest standard deviation for COP shift and number of micromovements occurred for medium cognitive workloads. In conclusion, while there were some interesting trends, few trends reached a statistical significance due to high variability among subjects for the outcome variables.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Ku-band electron linac for battery-powered hand-portable 2-MeV X-ray generator

X-ray generators, producing radiation in MeV range, are a critical tool for radiography, non-destructive testing and security applications. Field operation of such source requires them to be hand-portable, autonomous and allow parameter adjustability. RF linear accelerators can serve as a flexible, reliable, and robust radiation generator alternative to dangerous radioisotopes and bulky betatrons that are currently used for field radiography if their size, weight, cost, and imaging performance are matched to these sources. Here, in this paper, we present the design and test results of a 2 MeV Ku-band electron linac for a hand-portable X-ray generator system for field radiography being developed by RadiaBeam. The dramatic scale of miniaturization and cost-reduction is achieved thanks to the implementation of innovative technologies such as air-cooled Ku-band air-traffic control magnetrons, a split accelerating structure fabrication technique, and solid-state Marx modulators. This paper presents the design of the first prototype of the accelerator, its operation from Li-Ion batteries, as well as high-power and beam measurements.

43 PARTICLE ACCELERATORS↗