Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALKANE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Transient Studies of CO 2 Adsorption over CeO 2 Nanostructures with In Situ DRIFTS and Modulation Excitation

Experiments of in-situ DRIFTS combined with modulation excitation (ME) spectroscopy showed a rich surface chemistry associated with the adsorption of CO 2 on nanocubes and nanospheres of ceria. The nanocubes exposed faces with a (100) orientation, with the edges and corners displaying (110) and (111) orientations, respectively. Here, the nanospheres mainly contained ceria (111) and (110) planes. DFT calculations showed that CO 2 is a multidentate adsorbate on ceria that can undergo changes in its bonding configuration depending on the chemical environment. At 250 °C, a temperature typically used for the conversion of CO 2 into oxygenates, alkanes and olefins, CO 2 reacted with O centers or OH groups present on the nanocubes and nanospheres to yield bi- and tri-dentate carbonates, hydroxycarbonates, and formates. Both nanostructures were highly reactive and a dynamic equilibrium was established: carbonate species were rapidly generated upon the injection of CO 2 and they decomposed upon the removal of CO 2 from the gas phase. In the case of the ceria nanocubes, the adsorption/desorption processes were essentially reversible, opening the door to catalytic transformations. A larger concentration of defects in the ceria nanospheres led to strongly bound carbonates and formates that may be spectators, site blockers, or surface modifiers in catalytic processes. In the ME studies, additional intermediates were detected, and it was clear that the response of surface species to the presence/absence of CO 2 was highly dependent on the morphology of the ceria nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

MOF-Derived Iron Catalysts for Nonoxidative Propane Dehydrogenation

The dehydrogenation of light alkanes, sourced from cracking of traditional petrochemical feedstocks and from emerging shale gas, represents an attractive route to alkenes (ethene, propene, and butenes), which are the building blocks for valuable polymers and chemicals. Carbon-supported iron catalysts formed from pyrolysis of Fe-containing metal–organic frameworks (MOFs; Fe-BTC) are investigated here for propane dehydrogenation. The temperature of pyrolysis is found to influence the iron phase (oxide, metal, and carbide) and surface area of the material, but the high-temperature reduction and reaction conditions needed for propane dehydrogenation (500–600 °C) result in a metallic iron phase that is shown to be active and selective for propene formation, though differential isoconversion data indicate that the pyrolysis temperature affects the selectivity to propene. X-ray absorption spectroscopy and X-ray diffraction are utilized to investigate the catalyst state both pre- and post-reduction and reaction. Here, this work demonstrates how using MOFs as precursors may allow the synthesis of useful and perhaps unique catalyst structures that can be designed to obtain desired rates and product selectivities of hydrocarbon processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

First-Principles Approach to the Conductance of Covalently Bound Molecular Junctions

In this study, we develop a first-principles approach for accurate conductance calculations of covalently bound molecular junctions. Our approach extends the DFT+$Σ$ method, an approximate GW -based self-energy correction scheme acting on a tractable molecular subspace (based on a gas-phase reference of the same dimension) that corrects level alignment in the junction relative to density functional theory (DFT). We introduce a new extended gas-phase reference system, consisting of the molecule and several lead atoms, whose frontier orbitals maximally project onto the conducting orbitals of the junction. With this choice of reference, our self-energy correction to the Kohn–Sham Hamiltonian takes into account mixing of the gas-phase reference orbitals upon the formation of the junction. We apply our generalized DFT+$Σ$ approach to a series of alkane–chain junctions in which the molecules are covalently bound to the leads via carboxyl terminal groups. Our results lead to conductance values in quantitative agreement with experiment. We also revisit the well-studied Au–bipyridine–Au junction and show that we recover the original DFT+$Σ$ approach for relatively weak donor–acceptor molecule–lead binding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Effect of Hydrogen-Induced Metallization on Chemisorption

Hydrogen adsorption on transition-metal oxides can lead to surface metallization, but it is unclear how this change of surface property impacts the subsequent surface chemistry and catalysis. Herein, we investigate from the first-principles density functional theory how hydrogen-induced metallization affects the adsorption of common intermediates during the conversion of oxygenates and alkanes (such as alkoxy and alkyl groups) on the SrTiO 3 (001) surface. We find that alkoxy adsorption is greatly enhanced by hydrogen-induced metallization and the strength increases with the hydrogen coverage. This is because hydrogen adsorption leads to electron donation to the Ti site, which then forms a bond with the alkoxy group. The enhancement is found to be nonlocal. The same chemistry is also responsible for the enhanced adsorption of alkyl groups on the Ti site, which renders a switch in the site preference from the O site on pristine SrTiO 3 (001) to the Ti site on hydrogen-functionalized SrTiO 3 (001). Furthermore, these insights shed light on the impact of hydrogen-induced metallization on the chemisorption on a perovskite surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Hydrogen in Nanocatalysis

Hydrogen is ubiquitous in catalysis. It is involved in many important reactions such as water splitting, N 2 reduction, CO 2 reduction, and alkane activation. In this Perspective, we focus on the hydrogen atom and follow its electron as it interacts with a catalyst or behaves as part of a catalyst from a computational point of view. In this work, we present recent examples in both nanocluster and solid catalysts to elucidate the parameters governing the strength of the hydrogen–surface interactions based on site geometry and electronic structure. We further show the interesting behavior of hydride in nanometal and oxides for catalysis. Overall, the key take-home messages are: (1) the in-the-middle electronegativity and small size of hydrogen give it great versatility in interacting with active sites on nanoparticles and solid surfaces; (2) the strength of hydrogen binding to an active site on a surface is an important descriptor of the chemical and catalytic properties of the surface; (3) the energetics of the hydrogen binding is closely related to the electronic structure of the catalyst; (4) hydrides in nanoclusters and oxides and on surfaces offer unique reactivity for reduction reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controlling Hydrocarbon (De)Hydrogenation Pathways with Bifunctional PtCu Single-Atom Alloys

The conversions of surface-bound alkyl groups to alkanes and alkenes are important steps in many heterogeneously catalyzed reactions. On the one hand, while Pt is ubiquitous in industry because of its high activity toward C–H activation, many Pt-based catalysts tend to overbind reactive intermediates, which leads to deactivation by carbon deposition and coke formation. On the other hand, Cu binds intermediates more weakly than Pt, but activation barriers tend to be higher on Cu. We examine the reactivity of ethyl, the simplest alkyl group that can undergo hydrogenation and dehydrogenation via β-elimination, and show that isolated Pt atoms in Cu enable low-temperature hydrogenation of ethyl, unseen on Cu, while avoiding the decomposition pathways on pure Pt that lead to coking. Lastly, we confirm the predictions of our theoretical model and experimentally demonstrate that the selectivity of ethyl (de)hydrogenation can be controlled by changing the surface coverage of hydrogen.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anionic Surfactants from Reactive Separation of Hydrocarbons Derived from Polyethylene Upcycling

Chemical upcycling of polyethylene (PE) to long-chain alkylaromatics through tandem hydrocracking/aromatization has potential to provide value-added chemicals. However, the liquid product is a complex mixture of alkanes, alkylbenzenes, and polyaromatics, limiting its direct usability. The most valuable component of the product mixture is the alkylbenzenes because of their potential as precursors to anionic surfactants. In this study, a one-pot reactive separation is described. Sulfonating the product mixture from PE upcycling with silica sulfuric acid followed by neutralization with sodium hydroxide yields sodium alkylbenzenesulfonates (up to 93 mol % selectivity), along with a separate phase of lubricant-range hydrocarbons as a coproduct. Compared to petroleum-based sodium dodecylbenzenesulfonates, the reported PE-derived surfactant molecules show competitive physicochemical properties, including surface tension and interfacial tension. According to life cycle assessment, the described reaction strategy demonstrates 20% lower greenhouse gas emissions, when considering uses for the coproducts of PE upcycling, compared to conventional linear alkylbenzenesulfonates (LAS) manufacturing directly from petrochemical feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Understanding Pore Filling Processes and Adsorption/Desorption Hysteresis in Nanoporous Metal–Organic Frameworks: Insights from Grand Canonical Monte Carlo Simulations and Free Energy Calculations

Grand canonical Monte Carlo (GCMC) simulations were used to investigate pore filling and hysteresis in nanoporous metal-organic frameworks (MOFs). Adsorption and desorption isotherms were calculated for argon at 87 K in 1866 MOFs from the CoRE MOF database and for short n-alkanes in selected MOFs, keeping the adsorbent structure rigid. Analysis of the molecular configurations showed two different mechanisms and origins of hysteresis: one involving a transition of the adsorbate arrangement in the pores similar to a gas-to-liquid transition associated with a large change in the loading and one more similar to a liquid-to-solid transition associated with a relatively small change in the loading. Our GCMC simulations in MOFs with diverse pore topologies indicate exceptions to an empirical relationship for the minimum diameter of a cylindical pore required for hysteresis as a function of the adsorbate diameter and reduced temperature. The simulations reveal some structures where isotherms exhibit two steps in the adsorption branch and only one step in the desorption branch. Hysteresis loops with a different number of adsorption and desorption steps are not common. Here, to better understand why hysteresis is observed in the GCMC simulations, the concept of the transition probability for observing a step in the adsorption isotherm at a given pressure in a GCMC simulation is introduced. We used two different methods to calculate the transition probabilities and find that these yield comparable results. Furthermore, the transition probability provides a measure for the length of GCMC simulations to yield reliable results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Confocal Raman Microscopy of Hybrid-Supported Phospholipid Bilayers within Individual C 18 -Functionalized Chromatographic Particles

Measuring lipid-membrane partitioning of small molecules is critical to predicting bioavailability and investigating molecule-membrane interactions. A stable model membrane for such studies has been developed through assembly of a phospholipid monolayer on n-alkane-modified surfaces. These hybrid-bilayers have recently been generated within n-alkyl-chain (C 18 ) modified porous silica and used in chromatographic retention studies of small molecules. Despite their successful application, determining the structure of hybrid-bilayers within chromatographic silica is challenging, because they reside at buried interfaces within the porous structure. In this work, we employ confocal Raman microscopy to investigate the formation and temperature-dependent structure of hybrid-phospholipid bilayers in C 18 -modified, porous-silica chromato¬graphic particles. Porous silica provides sufficient surface area within a confocal probe volume centered in an individual particle to readily measure, with Raman microscopy, the formation of an ordered hybrid-bilayer of 1,2-dimyristoyl-sn-glycero-3-phospho¬choline (DMPC) with the surface C 18 chains. The DMPC surface density was quantified from the relative Raman scattering intensities of C 18 and phospholipid acyl chains and found to be ~40% of a DMPC vesicle membrane. By monitoring Raman spectra acquired versus temperature, the bilayer main phase transition was observed to be broadened and shifted to higher temperature compared to a DMPC vesicle, in agreement with differential scanning calorimetry (DSC) results. Raman scattering of deuterated phospholipid was resolved from protonated C 18 -chain scattering, showing that the lipid-acyl and C 18 chains melt simultaneously in a single phase transition. The surface-density of lipid in the hybrid bilayer, the ordering of both C 18 and lipid acyl chains upon bilayer formation, and decoupling of C 18 methylene C–H vibrations by deuterated lipid acyl chains all suggest an interdigitated acyl-chain structure. Furthermore, the simultaneous melting of both layers is also consistent with an interdigitated structure, where immobility of surface-grafted C 18 -chains decreases the cooperativity and increases the melting temperature compared to a vesicle bilayer.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Evidence of Structure-Performance Relation for Surfactants Used as Antiagglomerants for Hydrate Management

Molecular dynamics simulations were employed to study the structure of molecularly thin films of antiagglomerants adsorbed at the interface between sII methane hydrates and a liquid hydrocarbon. The liquid hydrocarbon was composed of dissolved methane and higher-molecular-weight alkane such as n-hexane, n-octane, and n-dodecane. The antiagglomerants considered were surface-active compounds with three hydrophobic tails and a complex hydrophilic head that contains both amide and tertiary ammonium cation groups. The length of the hydrophobic tails and the surface density of the compounds were changed systematically. The results were analyzed in terms of the preferential orientation of the antiagglomerants, density distributions of various molecular compounds, and other molecular-level properties. At low surface densities, the hydrophobic tails do not show preferred orientation, irrespectively of the tail length. At sufficiently high surface densities, our simulations show pronounced differences in the structure of the interfacial film depending on the molecular features and on the type of hydrocarbons present in the system. Some antiagglomerants are found to pack densely at the interface and exclude methane from the interfacial region. Under these conditions, the antiagglomerant film resembles a frozen interface. The hydrophobic tails of the antiagglomerants that show this feature has a length comparable to that of the n-dodecane in the liquid phase. It is possible that the structured interfacial layer is in part responsible for determining the performance of antiagglomerants in flow-assurance applications. The simulation results are compared against experimental data obtained with the rocking cell apparatus. It was found that the antiagglomerants for which our simulations suggest evidence of a frozen interface at sufficiently high surface densities are those that show better performance in rocking cell experiments.

Bui, Tai↗
DOE OSTI2023

Reactivity and Mechanisms of Methane, Ethane, and Benzene C–H Amination with an Iodine(III) Bistriflimide Complex

The iodine(III) bistriflamide complex (C 6 F 5 ) III I(NTf 2 ) 2 in HNTf 2 (bistriflimide acid; (CF 3 SO 2 ) 2 NH) selectively aminates methane and ethane. At a 100 °C reaction with methane after 3 h, it resulted in the exclusive formation of MeNTf 2 with a yield of approximately 40%. For ethane, at 100 °C in 2 h, a > 80% yield was found for a combination of monofunctionalized and difunctionalized amination products. In contrast to alkanes giving functionalized products, the reaction of (C 6 F 5 ) III I(NTf 2 ) 2 with benzene resulted in being stalled at (C 6 F 5 )I III (Ph)(NTf 2 ) with a <5% conversion to PhNTf 2 even at 120 °C. PWPB95-D3(BJ) density functional theory calculations indicate that C–H activation is the lowest energy pathway to break the hydrocarbon bonds and is lower in energy than radical, electron-transfer, proton-coupled electron-transfer, or hydride substitution pathways. For methane, from the (C 6 F 5 )I III (CH 3 )(NTf 2 ) intermediate, there is a one-step amine functionalization mechanism that avoids a carbocation intermediate. For ethane, from the (C 6 F 5 )I III (Et)(NTf 2 ) intermediate, dynamics simulations suggest the possibility of a competitive two-step functionalization pathway that involves a short-lived carbocation intermediate. As a result, a reaction coordinate strain analysis provides a straightforward model for understanding the relative reactivity rates for alkyl versus aryl functionalization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Supported Organoiridium-Pincer Catalysts for the Nonoxidative Dehydrogenation of High-Density Polyethylene

The iridium-pincer complex {p-OP( t Bu) 2 -C 6 H 2 -2,6-OP( t Bu) 2 ] 2 }Ir(C 2 H 4 ) ( P [Ir]) has been reported as a stable and active catalyst toward alkane dehydrogenation in homogeneous and supported heterogeneous systems. Dehydrogenation has been shown as a practical method toward functional polyolefins, with dehydrogenated high-density polyethylene (deHDPE) demonstrated as a valuable synthon for upcycling, as orthogonal C-H strategies are key to end-of-life upcycling. The heterogenization of P [Ir] on oxides (SiO 2 , Al 2 O 3 , and TiO 2 ; P [Ir]/E y O x ) yields a mixture of organometallic Ir-fragments whose catalytic nonoxidative dehydrogenation activity is modulated by the binding modes of the active metal on the surface. The binding mode was elucidated by a combination of solid-state NMR and XAFS analyses and supported by DFT calculations. Surface binding through the ligand enables active organoiridium that catalyzes internal olefination of deHDPE up to 1.23 mol % at 200 °C under dynamic vacuum. Alternatively, when the organoiridium is bonded though the metal center (Ir-O SiO ), catalyst activity is negligible. Furthermore, the catalytic activity of P [Ir]/SiO 2 showed comparable reactivity with the homogeneous analogue under the same catalytic conditions, and the heterogenized catalyst can be reused up to three cycles. In conclusion, this work highlights the importance of understanding how organometallic precursors react with hydroxylated metal oxide surfaces to establish structure-property relationships.

Hunt, Samuel B. [Argonne National Laboratory (ANL)↗
DOE OSTI2020

Mechanistic Insights into C–H Borylation of Arenes with Organoiridium Catalysts Embedded in a Microporous Metal–Organic Framework

Organometallic iridium catalysts can be used in conjunction with bispinacolatodiboron (B 2 Pin 2 ) to effect the borylation of a variety of substrates such as arenes, alkanes, heteroarenes, and oxygenates. Recently, efforts have also focused on integrating these catalysts into porous supports, such as metal–organic frameworks (MOFs). While the mechanism of homogeneous borylation systems has been thoroughly investigated experimentally and computationally, analogous studies in MOF-supported iridium catalysts have not been conducted. In this paper, we report the mechanistic investigation of a phenanthroline-iridium catalyst immobilized in the organic linker of Universitetet i Oslo (UiO)-67 (Zr 6 O 4 (OH) 4 (BPDC) 4 (PhenDC) 2 , BPDC = biphenyl-4,4'-dicarboxylate, PhenDC = 1,10-phenanthroline-4,4'-dicarboxylate). By using benzene as a model substrate, variable time normalization analysis (VTNA) of the kinetic data suggested a rate law consistent with zero-order in B 2 Pin 2 , and first-order in arene. A primary kinetic isotope effect (KIE) in the time course of benzene-d 6 borylation also provided complementary information about the role of the arene in the rate-determining step of the reaction. Characterization by techniques such as X-ray absorption spectroscopy (XAS) confirmed the presence of Ir(III), while pair distribution function (PDF) analysis suggested structures containing an Ir–Cl bond, further substantiated by X-ray photoelectron spectroscopy (XPS). Analysis of postcatalysis materials by inductively coupled plasma–optical emission spectroscopy (ICP-OES) revealed low boron accumulation, which may indicate an absence of boron in the resting state of the catalyst. Finally, in comparing borylation of benzene and toluene, a slight selectivity for benzene is observed, which is similar to the analogous homogeneous reaction, indicating the influence of substrate sterics on reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Evaluation of Gas Formation and Consumption Driven by Crossover Effect in High-Voltage Lithium-Ion Batteries with Ni-Rich NMC Cathodes

Gas formation during lithium-ion battery (LIB) cycling impacts the stability and safety of these batteries, especially for those containing Ni-rich NMC cathodes. In this paper, the cycling performance and gassing behavior of NMC811/graphite full cells with 4.2 and 4.4 V upper cutoff voltages were first compared. We report cells with a 4.2 V upper cutoff voltage had good cycling stability, exhibiting a capacity retention of 96.8% after 100 cycles and generated little gas. On the other hand, cells with a 4.4 V upper cutoff voltage lost over 25% of initial capacity after 100 cycles and generated large amounts of gas in the first 10 cycles. Electrochemical cycling of anode and cathode symmetric cells was implemented to isolate gases formed at the electrode. Gas chromatography–mass spectrometry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy were used to characterize the gas formation and associated material surfaces and structural properties. It was found that CO2 and fluorinated alkanes were the dominant gases evolved on the cathode side during cycling to 4.4 V. Gas crossover to the anode led to the depletion of gaseous products, which stabilized the cell performance to some extent. However, the growing surface reconstruction layer at the cathode, the thickening of the solid electrolyte interphase layer at the anode, and the gradual depletion of lithium inventory collectively contributed to the continuous capacity loss of full cells cycled to 4.4 V.

25 ENERGY STORAGE↗
DOE OSTI2020

Structural Rearrangements of Subnanometer Cu Oxide Clusters Govern Catalytic Oxidation

Sub-nanometer metal oxide clusters are very important materials that are widely used, for example, in catalysis or electronic devices such as sensors. Hence, it is critical to understand the atomic structures and properties of sub-nanometer metal oxide clusters under a reactive gas environment, such as O 2 . We consider here experimentally accessible precise-size Cu clusters (Cu 4 ) supported on partially hydroxylated amorphous alumina and show that such clusters can access, in catalytic conditions at high temperature under a pressure of O 2 , a large ensemble of oxidized structures, representing a large variety of oxygen content, of geometries in link with the support, and of catalytic activities for oxidation reactions, as seen from their reducibilities. A grand canonical basin hopping method based on first-principles energy reveals an ensemble of 24 configurations for the Cu 4 O x cluster of low free energy, less than 0.8 eV above the global minimum. The low free energy ensemble consists of clusters of different stoichiometries, which are mainly Cu 4 O 3 and Cu 4 O 4 in the temperature range of 200–400 °C and under a pressure of 0.5 bar of O 2 . The presence of several competitive isomers at each composition implies that cluster fluxionality impacts the phase diagram, which should be ensemble-averaged. In terms of catalytic oxidation activity, Cu 4 O 3 isomers present highly variable O abstraction energy: the most stable isomers are inactive for alkane oxidative dehydrogenation, but isomerization to metastable isomers, that proceed with low barrier, enable to create active configurations with low O abstraction energy. O atoms with the lowest anionic character, and thus of more electrophilic nature, present the best oxidation capability. In contrast, all Cu 4 O 4 isomers show a low O abstraction energy and a high potential catalytic activity. Here, this manuscript demonstrates the unique structural and electronic properties of sub-nano Cu oxide clusters and illustrates the critical roles of configuration ensembles and rearrangement to highly reactive metastable cluster isomers in nanocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Enhanced Oxygen Activation Achieved by Robust Single Chromium Atom-Derived Catalysts in Aerobic Oxidative Desulfurization

Oxidative desulfurization (ODS) plays critical roles in the production of high-quality sulfur impurity-free fuels, especially procedures using molecular oxygen as the sole oxidant. However, the state-of-the-art systems still rely on noble metal nanocatalysts, with deactivation issues caused by coking and sintering still present. In this work, leveraging the merits of single-atom catalysts (SACs) with earth-abundant metal cores and robust nanoporous supports, a series of catalysts composed of homogeneously distributed single chromium atoms anchored on multiwalled carbon nanotubes were fabricated and deployed to catalyze the aerobic ODS transformation. Adopting aromatic sulfur compound (ASC)-containing alkanes as a model system with molecular oxygen as the oxidant, efficient oxygen-to-active O 2 •– transformation and subsequent ASCs-to-sulfone conversion have been achieved, with the former benefiting from the chromium-active sites and the latter arising from the robust, nanoporous, and π-conjugated architecture of the supports. The attractive catalytic performance and cycling stability of the chromium-based SACs make them promising candidates in practical sulfur species removal from liquid fuels, supplying an alternative guidance on the catalyst design toward cost-effective and energy-efficient ODS procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Catalytic Hydrogenolysis of Polyethylene Under Reactive Separation

Deconstruction of polyolefins by catalytic hydrogenolysis is typically accompanied by the generation of undesired light gases. At reaction temperatures, the desired liquid products also tend to be volatile. Secondary cleavage of these liquid products contributes to light gas formation. The latter process was mitigated by reactive separation, continuously separating the liquid products from the catalyst throughout the experiment. At equivalent conversion, the yield and selectivity for oligomeric liquid species are increased under reactive separation, even though the carbon–carbon bond cleavage rate is slower than that in sealed experiments. More light gas is formed in the sealed reactor. Under 1 atm H 2 partial pressure, alkenes accompany the typical alkane hydrogenolysis products. Further, the alkene yield is higher, with greater selectivity for valuable α-olefins under reactive separation. These results provide the mechanistic insight that terminal alkenes are primary products of carbon–carbon bond cleavage during hydrogenolysis under experimental conditions, and secondary deconstruction of these species produces light gases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Active Sites in the Dealuminated Beta Zeolite-Supported Cobalt Catalyst for Non-Oxidative Ethane Dehydrogenation

Dispersed metal species in siliceous zeolites have been actively studied for non-oxidative dehydrogenation of ethane (NDE). Fundamental insights into the dynamics of metal species in zeolites under reaction conditions have rarely been explored. Herein, we report an atomic level understanding of the dynamics and activity of cobalt (Co) sites in dealuminated Beta zeolite (DeAl-BEA) for NDE during induction and reaction conditions with extensive characterization techniques such as diffuse reflectance UV–vis, solid state nuclear magnetic resonance and X-ray photoelectron, X-ray diffraction along with in situ Fourier transform infrared and X-ray absorption spectroscopy. For a catalyst with 0.5 mass % Co loading, tetrahedral Co 2+ mononuclear sites, di-coordinated to the zeolite framework and with two silanol groups in vicinity (i.e., (≡SiO) 2 Co(HO–Si≡) 2 ), form upon exposure to hydrogen during induction and persist through the NDE reaction. Increasing the Co loading to 3.0 mass % yielded Co sites with similar electronic and coordination structures but slightly elongated Co–O bonds. Upon cooling to room temperature, the Co sites persisted in the same coordination environment, though the disappearance of a feature in the Co K-edge near-edge region revealed changes in the active site’s electronic structure coinciding with modest shifts in bond lengths. The electronic structure and activity of (≡SiO) 2 Co(HO–Si≡) 2 sites were studied comparatively to a few other hypothetical Co 2+ coordination structures, using electronic structure calculations and microkinetic simulations. The simulations showed that NDE is controlled by β-hydride elimination following C–H bond activation and that Co-sites possessing flexibility because of neighboring silanol defects are more active. Interestingly, dinuclear Co–O–Co sites (i.e., (≡SiO)Co(HO–Si≡) 2 –O–(HO–Si≡) 2 Co(≡SiO)) were more active than the mononuclear (≡SiO) 2 Co(HO–Si≡) 2 sites because of favorable hydrogen bonding with the vicinal silanol groups. In conclusion, the present study bridges the gap between the knowledge acquired by ex-situ characterizations and the active sites under the reaction conditions in alkane dehydrogenation chemistry.

36 MATERIALS SCIENCE↗