Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

R_transport_matrices of the Fast Extraction Beam (FEB) of the AGS, and Beam Parameters at the Starting point of the AtR Line

As part of the task to improve and further automate the 'AtR BPM Application' we provide the theoretically calculated R-transport-matrices for the following beam line sections, which are shown schematically in Figure 1: (a) the Fast Extraction Beam section (FEB) of the AGS synchrotron. The FEB section starts at the middle of the GlO-kicker and ends at the middle of the H1 0{_}septum. (b) the Drift Extraction Channel (DEC) section of the AGS synchrotron. The DEC section starts at the middle of the H10{_}septum, continues along the fringe field region of the H11,H12, and H13 AGS main magnets, and ends at the starting point of the AtR line. The knowledge of these R-transport-matrices are needed in order to calculate the beam parameters at the beginning of the AtR line, which in turn, are required to calculate the magnet settings of the U{_}line, that match the U{_}line into the W{_}line. Also by incorporating these R{_}matrices into the model of the AtR line, the G10 kicker and the H10 septum are included in the AtR model therefore one can investigate any 'jitter' of either the GlO{_}kicker or HlO{_}septum by looking at the trajectory of the beam in the AtR line.

43 PARTICLE ACCELERATORS↗

Oxygen Reduction at Very Low Overpotential on Nanoporous Ag Catalysts

Here we report a monolithic nanoporous Ag (np-Ag) material, synthesized using the dealloying method, as high-performance catalysts for ORR in alkaline media. As shown in Scheme 1, when there is insufficient potential input, the O 2 molecules are more likely to rebound off from a planar electrode surface (i.e. bulk polycrystalline metal, films made from nanoparticles or nanowires) before they could be reduced. In contrast, they are more likely to be trapped inside the monolithic nanoporous structure, contacting with catalytic surface for multiple time, which greatly enhances the chance for them to be fully reduced. As a result, the np-Ag catalyst is able to achieve an equivalent or better ORR performance than the state-of the-art Pt/C catalyst at low overpotentials, which is most desired in electrochemical energy applications for maximizing efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thiolate-Mediated Photoinduced Synthesis of Ultrafine Ag 2 S Quantum Dots from Silver Nanoparticles

Photoinduced syntheses offer significant advantages over conventional thermal strategies, including improved control over reaction kinetics and low synthesis temperatures, affording nanoparticles with nontrivial and thermodynamically unstable structures. However, the photoinduced syntheses of non-metallic nanocrystalline products (such as metal sulfides) have not yet been reported. Herein, we demonstrate the first photoinduced synthesis of ultrafine (sub-2 nm) Ag 2 S quantum dots (QDs) from Ag nanoparticles at 10 °C. By thorough investigation of the mechanism for the transformation, a fundamental link was established between the intrinsic structures of the molecular intermediates and the final Ag 2 S products. Our results confirm the viability of low-temperature photochemical approaches in metal sulfide synthesis, and demonstrate a new rule which could be followed in it.

36 MATERIALS SCIENCE↗

Oxygen Reduction Reaction on Ag(111) in Alkaline Solution: A Combined Density Functional Theory and Kinetic Monte Carlo Study

We reported a detailed mechanistic study of the oxygen reduction reaction (ORR) on the model Ag(111) surface in alkaline solution by using density functional theory (DFT) and Kinetic Monte Carlo (KMC) simulations, in which multiple pathways involving either 2 e - or 4 e - mechanisms were included. The theoretical modelling presented here is able to reproduce the experimentally measured polarization curves in both low and high potential regions. An electrochemical 4 e - network including both a chemisorbed water (*H 2 O)-mediated 4 e - associative pathway and the conventional associative pathway was identified to dominate the ORR mechanism. On the basis of the mechanistic understanding derived from these calculations, the ways to promote the ORR on Ag(111) were provided, including facilitating *OH removal, **O 2 reduction by *H 2 O, and suppressing **O 2 desorption. Finally, the origin of the different ORR behaviors of Ag(111) and Pt(111) was also discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface‐modified Ag@Ru‐P25 for photocatalytic CO 2 conversion with high selectivity over CH 4 formation at the solid–gas interface

Systematic optimization of the photocatalyst and investigation of the role of each component is important to maximizing catalytic activity and comprehending the photocatalytic conversion of CO 2 reduction to solar fuels. A surface-modified Ag@Ru-P25 photocatalyst with H 2 O 2 treatment was designed in this study to convert CO 2 and H 2 O vapor into highly selective CH 4 . Ru doping followed by Ag nanoparticles (NPs) cocatalyst deposition on P25 (TiO 2 ) enhances visible light absorption and charge separation, whereas H 2 O 2 treatment modifies the surface of the photocatalyst with hydroxyl (–OH) groups and promotes CO 2 adsorption. High-resonance transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure techniques were used to analyze the surface and chemical composition of the photocatalyst, while thermogravimetric analysis, CO 2 adsorption isotherm, and temperature programmed desorption study were performed to examine the significance of H 2 O 2 treatment in increasing CO 2 reduction activity. The optimized Ag 1.0 @Ru 1.0 -P25 photocatalyst performed excellent CO 2 reduction activity into CO, CH 4 , and C 2 H 6 with a ~95% selectivity of CH 4 , where the activity was ~135 times higher than that of pristine TiO 2 (P25). For the first time, this work explored the effect of H 2 O 2 treatment on the photocatalyst that dramatically increases CO 2 reduction activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydride Migration within RhH 2 Ag 19 Superatom: A Combined Neutron Diffraction and DFT Analysis

Abstract An investigation combining neutron diffraction and DFT allows determining the most likely hydride migration pathway within the icosahedral metal framework of [RhH 2 Ag 19 {S 2 P(O n Pr) 2 } 12 ] (RhH 2 Ag 19 ). Starting from the experimentally derived solid‐state structures, a computational analysis is able to reveal an energetically favorable migration pathway with a maximum energy barrier of 4.2 kcal mol −1 . The two hydrides migrate simultaneously within the Rh@Ag 12 icosahedral core, traversing several positional isomers. This study expands the understanding of hydride dynamics in nanoclusters and provides critical insights into the structural flexibility of the superatom framework. These findings have significant implications for hydrogen storage, catalysis, and the design of advanced hydride‐containing materials.

Chemistry↗

Enhancement of Kerr Signal in Co Thin Films Incorporating Ag Nanoparticles Surrounded by TiO{sub 2}

In this study, we demonstrate the effect of localized surface plasmon resonance (LSPR) on magneto-optical (MO) activity of Co thin films incorporating Ag nanoparticles (NPs) so that the Ag NPs were surrounded by TiO{sub 2} (Ag [TiO{sub 2}]). The deposition of Co on glass substrates was performed using an oblique deposition technique, thereby obtaining a variable film thickness. Three samples of glass/Co, glass/Co/Ag NPs, and glass/Co/Ag [TiO{sub 2}] were compared with each other in terms of Kerr signal intensity. Our results show that while all samples have an easy axis in the film plane, the corresponding Kerr signal is amplified in the glass/Co/Ag [TiO{sub 2}] structure. A combination of SPR and light localization is the reasoning behind the amplification. These studies may open a new route in the research area of LSPR-based MO Kerr effect since the improved LSPR enhances MO properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, Elastic, Thermodynamic, Electronic, and Magnetic Investigations of Full-Heusler Compound Ag{sub 2}CeAl: FP-LAPW Method

Structural, elastic, thermodynamic, electronic, and magnetic properties of the full-Heusler compound Ag{sub 2}CeAl were determined using generalized gradient approximation with exchange-correlation functional GGA (PBEsol) with spin-orbit coupling (SOC) correction. The elastic modulus and their pressure dependence are calculated. From the elastic parameter behavior, it is inferred that this compound is elastically stable and ductile in nature. Through the quasi-harmonic Debye model, in which the phononic effect is considered the effect of pressure P (0 to 50) and temperature T (0 to 1000) on the lattice constant, the elastic parameters, bulk modulus B, heat capacity and thermal expansion α, internal energy U, entropy S, Debye temperature 𝜃{sub D}, Helmholtz free energy A, and Gibbs free energy G are investigated. The thermodynamic properties show that the compound Ag{sub 2}CeAl is a heavy fermion material. The density of state (DOS), magnetic momentum, and band structure are computed, to investigate the magnetic and metallic characteristics. The calculated polarization of the compound is 77.34%. The obtained results are the first predictions of the physical properties for the rare-earth-based (Ce) full-Heusler Ag{sub 2}CeAl.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, Characterization, and Magnetic Properties of A{sub 2}Co{sub 2}Fe(VO{sub 4}){sub 3} (A = Ag or Na) Alluaudite-Type Vanadates

We successfully synthesized the polycrystalline form of vanadates A{sub 2}Co{sub 2}Fe(VO{sub 4}){sub 3} (A = Ag or Na) using sol–gel method. Powder X-ray diffraction analysis allowed the identification of the alluaudite-type vanadate structure. The morphology and the elemental composition of the synthesized powders were analyzed by scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometer (EDS). The two vanadates A{sub 2}Co{sub 2}Fe(VO{sub 4}){sub 3} (A = Ag or Na) were further characterized by infrared and Raman spectroscopies to get complementary structural information. The infrared and Raman spectroscopy-observed bands were assigned to VO{sub 4}{sup 3−} vibration modes. The room temperature {sup 57}Fe Mössbauer spectroscopy confirmed the +III oxidation state of iron. Magnetic properties of these vanadates were investigated. The magnetic susceptibility data reveal that the predominant interactions in these vanadates are antiferromagnetic with a Curie−Weiss constant of θ = − 125.6 K for Na{sub 2}Co{sub 2}Fe(VO{sub 4}){sub 3} and θ = − 104.5 K for Ag{sub 2}Co{sub 2}Fe(VO{sub 4}){sub 3}. The magnetic interactions in these vanadates were discussed according to semiempirical Goodenough–Kanamori–Anderson rules (GKA).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ag on the Magnetic Anisotropy of Fe{sub 3}O{sub 4} Nanocomposites

In this work, the thermal decomposition method is used to obtain Fe{sub 3}O{sub 4}-Ag nanocomposites. The weight losses observed in the thermogravimetric measurements are used to estimate the amount of organic mass present in the samples. Fourier-transform infrared (FTIR) spectra show characteristic absorption peaks of the stretching vibration of the Fe-O and C-H groups. Samples are characterized structurally and morphologically by measurements of X-ray diffraction (XRD) and transmission electronic microscopy (TEM), respectively. The XRD patterns indicate the formation of a cubic phase with spinel crystallographic structure. Particles sizes analysis estimated by Scherrer’s equation for Fe{sub 3}O{sub 4} phase show that sizes are unaffected by the Ag-insertion. TEM images reveal that the nanoparticles have a spherical-like shape and a mean particles sizes ranging 3 < d < 4 nm. The best fits of zero-field-cooling and field-cooling (ZFC/FC) curves allow us to state that the magnetic anisotropy constant decreasing as a function of Ag concentration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of filler metal composition on the strength of yttria stabilized zirconia joints brazed with Pd-Ag-CuOx

The Ag-CuOx system is of interest to be used to be used as an air braze filler metal for joining high temperature electrochemical devices. Previous work has shown that the melting temperatures can be increased by adding palladium to Ag-CuOx and it is expected that this may aid high temperature stability. This work compares the room temperature bend strength of joints made between yttria-stabilized zirconia (YSZ) air brazed using Ag-CuOx without palladium and with 5 and 15mol% palladium additions. It has been found that in general palladium decreases joint strength, especially in low copper oxide compositions filler metals. At high copper oxide contents, brittle fracture through both copper oxide rich phases and the YSZ limits joint strength.

36 MATERIALS SCIENCE↗

In-Situ X-Ray Diffraction Observations of Low Temperature Ag-Nanoink Sintering and High Temperature Eutectic Reaction with Copper

Nanoinks, which contain nm sized metallic particles suspended in an organic dispersant fluid, are finding numerous microelectronic applications. Nanoinks sinter at much lower temperatures than bulk metals due to their high surface area to volume ratio and small radius of curvature, which reduces their melting points significantly below their bulk values. The unusually low melting and sintering temperatures have unique potential for materials joining since their melting points increase dramatically after initial sintering. In this paper Ag nanoink is studied using in-situ synchrotron based x-ray diffraction to follow the kinetics of the initial sintering step by analysis of diffraction patterns, and to directly observe the high remelt temperature of sintered nanoinks. Ag nanoink is further explored as a possible eutectic bonding medium with copper by tracking phase transformations to high temperatures where melting occurs at the Ag-Cu eutectic temperature, demonstrating nanoinks as a viable eutectic bonding medium.

36 MATERIALS SCIENCE↗

Effect of temperature on the nano/microstructure and mechanical behavior of nanotwinned Ag films

In situ and ex situ annealed nanotwinned (NT) Ag thin films have been investigated by TEM and tensile testing to reveal the thermal stability of the twin boundaries, grain boundaries, dislocation densities, and their respective influence of the macroscopic yield stress. The NT Ag films synthesized by magnetron sputtering form both coherent (CTB, Σ3{111}) and incoherent (ITB, Σ3{112}) twin boundaries that are thermally stable up to 473 K (200 Celsius), i.e., no obvious changes in grain size, twin spacing, and yield stress. In situ TEM observations show the dislocations become mobile at 453 K (180 Celsius) resulting in dislocation annihilation primarily at twin and grain boundaries. Rotation of grains with low-angle grain boundaries was observed during in situ heating, resulting in the growth of columnar grains above 453 K (180 Celsius). However, no noticeable changes in the spacings of CTBs were observed during the entire in situ and ex situ annealing [up to 873 K (600 Celsius)]. The increase in grain size and concomitant decrease in yield stress following annealing at various temperatures can be described by the Hall-Petch relationship, demonstrating that grain size rather than twin spacing is most sensitive to thermal annealing and plays a dominant role in the deformation of NT Ag films.

36 MATERIALS SCIENCE↗

Comparison of Extensive Thermal Cycling Effects on Microstructure Development in Micro-alloyed Sn-Ag-Cu Solder Joints

Pb-free solder alloys based on the Sn-Ag-Cu (SAC) ternary eutectic have promise for widespread adoption across assembly conditions and operating environments, but enhanced microstructural control is needed. Micro-alloying with elements such as Zn was demonstrated for promoting a preferred solidification path and joint microstructure earlier in simple (Cu/Cu) solder joints studies for different cooling rates. This beneficial behavior now has been verified in reworked ball grid array (BGA) joints, using dissimilar SAC305 (Sn-3.0Ag-0.5Cu, wt.%) solder paste. After industrial assembly, BGA components joined with Sn-3.5Ag-0.74Cu-0.21Zn solder were tested in thermal cycling (-55 C/+125 C) along with baseline SAC305 BGA joints beyond 3000 cycles with continuous failure monitoring. Weibull analysis of the results demonstrated that BGA components joined with SAC + Zn/SAC305 have less joint integrity than SAC305 joints, but their lifetime is sufficient for severe applications in consumer, defense, and avionics electronic product field environments. Failure analysis of the BGA joints revealed that cracking did not deviate from the typical top area (BGA component side) of each joint, in spite of different Ag3Sn blade content. Thus, SAC + Zn solder has not shown any advantage over SAC305 solder in these thermal cycling trials, but other characteristics of SAC + Zn solder may make it more attractive for use across the full range of harsh conditions of avionics or defense applications.

36 MATERIALS SCIENCE↗

Processing and Characterization of Ag-Cu-Sn Brazing Alloy Prepared by a Mechanical Alloying Method

Mechanical alloying was used to prepare an Ag-Cu-Sn brazing alloy with the low amounts of intermetallic compounds. X-ray diffraction and differential scanning calorimetry were carried out to investigate the phase transformation of the as-milled samples. It seemed that the intermetallic compounds experienced the stage of synthesis-decomposition-resynthesis in the ball milling process. By controlling the ball milling time and tin contents, the solid solution phases of Ag (Cu, Sn) and Ag (Cu) were achieved in the 60Ag30Cu10Sn sample after milling for 40 h. Although the intermetallic compound will be generated during the brazing process, the improvement of their distributed morphology is beneficial for the good bonding interface of the joint with stainless steel substrate.

36 MATERIALS SCIENCE↗

Microstructure and Mechanical Properties of Stainless Steel/Brass Joints Brazed by Sn-Electroplated Ag Brazing Filler Metals

To develop a high-Sn-content AgCuZnSn brazing filler metal, the BAg50CuZn was used as the base filler metal and a Sn layer was electroplated upon it. Then, the 304 stainless steel and the H62 brass were induction-brazed with the Sn-plated brazing filler metals. The microstructures of the joints were examined with an optical microscope, a scanning electron microscope and an x-ray diffractometer. The corresponding mechanical properties were obtained with a universal tensile testing machine. The results indicated that the induction brazed joints consisted of the Ag phase, the Cu phase and the CuZn phase. When the content of Sn in the Sn-plated Ag brazing filler metal was 6.0 or 7.2 wt.%, the Cu{sub 5}Zn{sub 8}, the Cu{sub 41}Sn{sub 11} and the Ag{sub 3}Sn phases appeared in the brazed joint. The tensile strength of the joints brazed with the Sn-plated filler metal was higher compared to the joints with the base filler metal. When the content of Sn was 6.0 wt.%, the highest tensile strength of the joint reached to 395 MPa. The joint fractures presented a brittle mode, mixed with a low amount of ductile fracture, when the content of Sn exceeded 6.0 wt.%.

36 MATERIALS SCIENCE↗

Laser Additive Manufacturing of (Ti-6Al-4V)/10 wt.% Ag Composite Using Spherical Powders to Reduce Wear and Friction

In order to extend the service lifetime of Ti-6Al-4V-based components, friction and wear behaviors of Ti-6Al-4V alloys needed to be further improved. Laser additive manufacturing with a moving laser beam was used to prepare (Ti-6Al-4V)/10 wt.% Ag samples, on a three-dimensional RC-SLM400 printer with laser powers of 2-10 kW. (Ti-6Al-4V)/10 wt.% Ag samples were successfully printed using spherical powders prepared by gas atomization process (SPGAP) and combustion reaction (SP-CR). The tribological properties of the as-prepared samples sliding against Si{sub 3}N{sub 4} balls were examined using a ball-on-disk tribometer. The results showed that the tribological behavior of (Ti-6Al-4V)/10 wt.% Ag printed by SP-CR was better than that of the sample printed by SPGAP. The low friction and reduced wear were mainly attributed to the formation of the lubrication layer containing large amounts of silver, which can exhibit an excellent deformation and plastic ductility. It effectively reduced the friction resistance and material loss and provided the good lubrication for 0-80 min, resulting in low friction and reduced wear of the samples prepared by SP-CR.

36 MATERIALS SCIENCE↗

Microstructure and Three-Point Bending Fatigue Behavior of Al-Cu-Mg-Ag Alloys with Various Mg Contents

This paper presents an investigation on the influence of Mg content on the microstructures, tensile properties and three-point bending fatigue behavior of Al-Cu-Mg-Ag alloys. The results indicate that the alloy containing 0.70 wt.% Mg possesses lower tensile properties and higher fatigue performance compared to the one with 1.15 wt.% Mg. Increasing Mg content in Al-Cu-Mg-Ag alloys can enhance the nucleation and precipitation of Ω phase, as well as increase the volume fraction and number density of constituent particles. The investigation of the fatigue crack initiation and growth behavior of Al-Cu-Mg-Ag alloy using interrupted fatigue tests suggests that micro-cracks mainly nucleate on Al{sub 2}Cu constituent particles and the fatigue life is mainly associated with the density of constituent particles.

36 MATERIALS SCIENCE↗