Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AFTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Supercritical wing sections II: A handbook

The numerical aspect of theoretical work on transonics and supercritical wing sections are compiled. A model of the trailing edge is introduced which eliminates the loss of 15 to 20 percent experienced with heavily aft-loaded models, and it is indicated how drag creep can be reduced at off-design conditions. A rotated finite difference scheme is presented which can handle supersonic as well as subsonic free stream Mach numbers and leads to an effective three-dimensional program for the computation of transonic flow past an oblique wing. In the case of two-dimensional flow, the method is extended to take into account the displacement thickness computed by a semiempirical turbulent boundary layer correction. A series of supercritical wing sections is discussed together with comparisons between experimental and theoretical data. Computer programs and a brief manual for their operation are listed. It is shown that the programs furnish a physically adequate computer simulation of the compressible flows that arise in problems of transonic aerodynamics.

Bauer, F.↗
NASA NTRS1975

Designing for solid rocket booster reusability

The Solid Rocket Booster (SRB) of the Space Shuttle Program has been designed to be recovered, refurbished, and reused up to 19 times on subsequent launches. The design modifications to the SRB to incorporate this capability include the addition of a parachute recovery system and minor structural modifications to the nose cone, forward skirt, aft skirt, and solid rocket motor structures for withstanding the water impact loading. In addition, the detail design of subsystem hardware requires careful attention to corrosion prevention and facility of refurbishment operations. A cost analysis comparing the reusable SRB with an expendable version shows a substantial reduction in Space Shuttle cost per flight is achieved with the reusable design approach.

Nevins, C. D.↗
NASA NTRS1975

Effect of empennage interference on single-engine afterbody/nozzle drag

An investigation has been conducted in the Langley 16-foot transonic tunnel to determine the effects of empennage surfaces on single-engine afterbody and nozzle drag at Mach numbers up to 1.20. Empennage interference drag was obtained by using experimental values of afterbody/nozzle drag and theoretical values of empennage drag. Three methods for minimizing adverse empennage interference effects were investigated. Results show that empennage interference effects were always detrimental but could be reduced by proper location of tail surfaces. Afterbody contouring and addition of 'contour' bumps were generally ineffective in reducing aft-end drag for Mach numbers less than 0.95.

Berrier, B. L.↗
NASA NTRS1975

Investigation of two-dimensional wedge exhaust nozzles for advanced aircraft

Two-dimensional wedge nozzle performance characteristics were investigated in a series of wind-tunnel tests. An isolated single-engine/nozzle model was used to study the effects of internal expansion area ratio, aftbody cowl boattail angle, and wedge length. An integrated twin-engine/nozzle model, tested with and without empenage surfaces, included cruise, acceleration, thrust vectoring and thrust reversing nozzle operating modes. Results indicate that the thrust-minus-aftbody drag performance of the twin two-dimensional nozzle integration is significantly higher, for speeds greater than Mach 0.8, than the performance achieved with twin axisymmetric nozzle installations. Significant jet-induced lift was obtained on an aft-mounted lifting surface using a cambered wedge center body to vector thrust. The thrust reversing capabilities of reverser panels installed on the two-dimensional wedge center body were very effective for static or in-flight operation.

Maiden, D. L.↗
NASA NTRS1975

Stabilizer flutter investigated by flight test

Flight flutter tests were conducted on an experimental airplane which resulted in the successful prediction of a limited amplitude stabilizer flutter at supersonic speeds. The flutter obtained was unusual in that fore and aft bending of the stabilizer carry-through structure contributed to the flutter condition. During flight tests the impending flutter condition was observed from force per unit amplitude, damping coefficient, and frequency measurements. A description is given of the physical and operational characteristics of the test equipment and telemetering facilities. A flutter analysis using measured modes and incompressible two-dimensional strip air forces yielded a conservative flutter speed. Sled tests of a similar stabilizer configuration had lead to the conclusion that flutter would not be encountered. Certain overall conclusions are reached regarding this particular flight flutter testing program and the need for a concerted research effort in this field.

Baird, E. F.↗
NASA NTRS1975

Flight service evaluation of Kevlar-49/epoxy composite panels in wide-bodied commercial transport aircraft

Kevlar-49 fairing panels were inspected and found to be performing satisfactorily after two years flight service on an Eastern and an Air Canada L-1011. Six panels are on each aircraft including sandwich and solid laminate wing-body panels, and 300 F service aft engine fairings. Some of the panels were removed from the aircraft to permit inspection of inner surfaces and fastener hole conditions. Minor defects such as surface cracks due to impact damage, small delaminated areas, elongation and fraying of fastener holes, were noted. None of these defects were considered serious enough to warrant corrective action in the opinion of airline personnel. The defects are typical for the most part of defects noted on similar fiberglass parts.

Stone, R. H.↗
NASA NTRS1975

Effects of long-chord acoustically treated stator vanes on fan noise. 1: Effect of long chord (taped stator)

A set of long-chord stator vanes was designed to replace the vanes in an existing fan stage. The long vanes consisted of a turning section and axial extension pieces, both of which incorporated acoustic damping material. The acoustic damping material was made inactive for these tests by covering with metal tape, and the stator vanes were tested in three length configurations. Compared to the values for the original stage, broadband noise was reduced in the middle to high frequencies with the long stator vanes, but a broadband noise increase was observed at the low frequencies. No change was observed in the blade passage tone, but some aft end reduction in the overtones was observed.

Dittmar, J. H.↗
NASA NTRS1975

Propulsion airframe integration

Wind tunnel simulation tests are reported that utilize a 20 inch powered nacelle for airframe integration studies. Considered are: effects of boattail positioning, nacelle size, aft fuselage drag, over-the-wing half span model installation, and turboprop and ducted fan configurations.

Mikkelson, D.↗
NASA NTRS1975

Thermostructural testing of instrumented ATJ-S graphite nosetip models in the AFFDL 50 MW rent facility

Instrumented ATJ-S graphite shell nosetip models were tested in the AFFDL 50 MW RENT Facility. The inside surface of the models were instrumented with seven thermocouples and three clip-on extensometers. One thermocouple was located at the inside stagnation point and three thermocouples were located at 120 degree intervals on the aft portion of the skirt of the model. In addition, three thermocouples at 120 degree intervals plus three clip-on extensometers at 120 degree intervals offset 60 degrees from the thermocouples were located in the critical region. The outside surface temperature of the models was monitored in two locations by optical pyrometers. Finally, the tests were recorded by three high speed motion picture cameras. Pressure models and calorimeters were also tested in order to help define the flow field condition and heating distribution around the models.

Budde, C. L.↗
NASA NTRS1975

Turbulent wall jet in a coflowing stream

A theoretical investigation was undertaken to develop a relatively simple model of a two-dimensional, turbulent wall jet in a coflowing stream. The incompressible jet flow was modeled by using an integral method which includes turbulent shear stress, entrainment, and heat transfer. The method solves the conservation equations for the average jet flow properties and uses the velocity profile suggested by Escudier and Nicoll to obtain detailed characteristics of the jet on a flat plate. The analytical results compare favorably with experimental data for a range of injection velocities, which demonstrates the usefulness of the theory for estimating jet growth, velocity decay, and wall skin friction. The theory, which was applied to a Coanda jet on a circular cylinder, provided estimates of suction pressures aft of the jet exit that were in close agreement with experimental values.

Campbell, J. F.↗
NASA NTRS1975

Results of an Investigation of the 0.003-scale Space Shuttle External Tank MSFC Model 460 in the NASA/MSFC 14 x 14-inch Trisonic Wind Tunnel to Determine Static Pressure Distributions During Reentry (TA2F), Volume 1

Objectives of the test were to obtain static pressure distributions for the ET at reentry conditions. Basic configuration of the model was the MCR 0200 ET modified to include a rectangular crossbar at the aft ET/orbiter attach point. Mach numbers were 1.96, 3.48, and 4.96. Reynolds number per foot at these Mach numbers were 6.95 million, 6.42 million, and 4.95 million, respectively. Angle of attack range was -8 to 100 degrees and roll angle was 0 to 315 degrees. Occupancy hours were 104.

Ramsey, P. E.↗
NASA NTRS1975

Results of an investigation of hypersonic viscous interaction effects on and 0.01 scale Space Shuttle Orbiter 51-0 model in the AEDC-VKF Hypervelocity Wind Tunnel (0A81)

The major hypersonic aerodynamic results obtained experimentally from the 0.010-scale (51-0) 140A/B orbiter vehicle are presented. The test was conducted over an angle-of-attack range from 20 to 35 degrees for nominal Mach numbers of 16 and 20. The Mach 16 data were obtained at Reynolds numbers, based on model length, of nominally 0.54 x 106 and 1.18 x 106. The Mach number 20 data were obtained at nominal Reynolds numbers of 0.08 x 106 and 0.27 x 106. Various elevon deflections and body flap deflections were tested for determination of control effectiveness. The test objectives were: (1) verify December 1973 aerodynamic Design Data Book estimates for Mach number greater than 10; (2) determine configuration forward and aft trim boundaries and control characteristics; (3) determine high Mach number - low Reynolds number effects; (4) determine if positive control surface flow separation is present and magnitude of separation effects.

Elder, D. J.↗
NASA NTRS1975

Results of an investigation of the 0.003-scale space shuttle external tank MSFC model 460 in the NASA/MSFC 14 x 14 inch Trisonic Wind Tunnel to determine static pressure distributions during reentry (TA2F), volume 3

Static pressure distributions for the external tank (ET) at reentry conditions are presented. Basic configuration of the model was the MCR 0200 ET modified to include a rectangular crossbar at the aft ET/orbiter attach point. Mach numbers were 1.96, 3.48, and 4.96. Reynolds number per foot at these Mach numbers were 6.95 million, 6.42 million, and 4.95 million, respectively. Angle of attack range was -8 to 100 degrees and roll angle was 0 to 315 degrees.

Ramsey, P. E.↗
NASA NTRS1976

Some recent applications of the suction analogy to vortex-lift estimates

An extension of the suction analogy for the estimation of vortex lift along the side edge of wings is reviewed along with the concept of an augmented vortex lift to account for the effect of the leading-edge vortex passing downstream over an aft part of the model. Applications of these extensions have resulted in an improved estimating capability for a wide range of isolated sharp-edge planforms and also for multiple lifting surfaces. Hence, the suction analogy concept can now have wider applicability at both subsonic and supersonic speeds, especially in the preliminary design cycle.

Lamar, J. E.↗
NASA NTRS1976

Heat-Transfer Characteristics of Partially Film Cooled Plug Nozzle on a J-85 Afterburning Turbojet Engine

Plug nozzle film cooling data were obtained downstream of a slot located at 42 percent of the total plug length on a J-85 engine. Film cooling reduced the aft end wall temperature as much as 150 K, reduced total pressure loss in the upstream convection cooling passages by 50 percent, and reduced estimated compressor bleed flow requirement by 14 percent compared to an all convectively cooled nozzle. Shock waves along the plug surface strongly influenced temperature distributions on both convection and film cooled portions. The effect was most severe at nozzle pressure ratios below 10 where adverse pressure gradients were most severe.

Nosek, S. M.↗
NASA NTRS1976

An analytical study of turbulence responses, including horizontal-tail loads, of a control-configured vehicle with relaxed static stability

A static stability augmentation system (SSAS) with angle-of-attack, pitch-rate, and forward-speed feedback is used to stabilize control-configured rigid vehicles with relaxed static stability. Airplane configurations include a baseline configuration and two representative control-configured vehicle configurations. The first statically unstable configuration has baseline geometry and an aft center of gravity; the second statically unstable configuration has reduced tail length and area and a forward neutral point. Stability, flying-qualities, and maneuverability requirements are imposed on the airplane-SSAS systems. Turbulence responses of the rigid airframe and tail loads are examined in terms of configuration changes for a given control law and in terms of control law changes for a given configuration.

Perry, B., III↗
NASA NTRS1976

An investigation of drag reduction fairings on the space shuttle vehicle 5 configuration (model 74-OTS) in the MSFC 14 inch trisonic wind tunnel (FA14)

An experimental investigation was conducted in the MSFC 14-inch TWT (FA14, TWT 600) to determine the static stability and drag on a 0.004 scale model of the shuttle ascent configuration. The primary objective was to study the possibility of reducing the launch vehicle drag by using Orbiter/ET/SRB fairings, streamlined orbiter fore and aft attach structures, SRB and ET alternative nose configurations, and devices for modifying the flow between the orbiter and ET. The secondary objective was to determine the longitudinal and directional characteristics of the ascent configuration with the most promising of the drag reduction devices installed. Data were obtained for a Mach number range of 0.6 through 4.96 and angles of attack from -5 through 5 degrees at zero degrees side slip angle.

Ramsey, P. E.↗
NASA NTRS1976

Noise suppression by an acoustically treated three-ring inlet on a TF-34 engine

Acoustic performance tests were conducted with a three-ring inlet noise suppressor designed for a TF-34 engine. For all tests the aft noise sources were highly suppressed. The measured inlet suppression was large, reaching levels greater than 30 db at the peak. Comparisons of the data and the performance predictions were in reasonably good agreement. The frequency of peak attenuation was well predicted; the magnitude and spectral shape were reasonably well predicted. Agreement was best when the distribution of sound energy across the inlet was taken into account in the performance predictions. Tests in which the length of treatment was varied showed an orderly progression of attenuation with length; performance predictions for the different lengths also showed an orderly progression with length. At the highest speed of the engine, multiple pure tones were present throughout the spectrum in the source noise signature. These tones were effectively suppressed by the inlet liner, even at low frequencies, although the liner was designed to work best at the blade-passing frequency.

Minner, G. L.↗