Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADSORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38

Preparation of Porous Nanofibers from Electrospun Polyacrylonitrile/Polyvinylidene Fluoride Composite Nanofibers by Inexpensive Salt Using for Dye Adsorption

The high surface area of porous nanofibers enhances their performance for many applications. The present study investigated electrospinning and dye adsorption properties of polymeric nanofibers which were porous by various types of salts. The salt/polyacrylonitrile/polyvinylidene fluoride composite nanofibers were electrospun, and the inexpensive salts such as sodium chloride (NaCl), sodium bicarbonate (NaHCO{sub 3}), or calcium chloride (CaCl{sub 2}) was used to manufacture the porous fibers. Subsequently, the salt was removed by a selective dissolution, and salt extraction of nanofibers was performed with the solution of hydrochloric acid (10 wt%). Salt/PVDF/PAN and porous PVDF/PAN composite nanofibers have been applied to dye adsorption of solution. The characteristics of nanofibers were studied by Fourier transform infrared microscopy (FTIR) and scanning electron microscopy (SEM) analysis. FTIR showed that the salt was extracted from PVDF/PAN nanofibers successfully, and SEM indicated that many pores were aligned with the nanofibers. The adsorption capacity of salt nanofibers webs and porous nanofibers webs for Basic Blue 41 were compared with each other, and porous fibers were obtained from NaHCO{sub 3} having the highest dye adsorption value. Adsorption of dyes follows the Langmuir isotherm and pseudo-second order kinetics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microfluidic Fabrication of Nanoparticles Based on Ethyl Acrylate-Functionalized Chitosan for Adsorption of Methylene Blue from Aqueous Solutions

The adsorption of nanoparticle (NP)-based adsorbents especially those made of polymers to remove dyes as toxic substances from pollutants is yet remained as a critical issue. The objective of this work was to prepare microfluidic (MF) fabrication of NPs based on ethyl acrylate (EA)-functionalized chitosan (CS) for methylene blue (MB) dye removal from aqueous solutions. For this purpose, a series of experiments such as FTIR, SEM alongside DLS, and UV–vis spectrophotometry were carried out to investigate the physicochemical properties of the samples. The FTIR spectra showed that the amine (–NH{sub 2}) and hydroxyl (–OH) groups on CS structure were replaced with EA, appropriately. The SEM and DLS results depicted that EA-functionalized CS NPs fabricated using MF technique had uniform shapes, and the diameters as small as 70 nm compared to those samples produced via bulk mixing (BM) method (~ 300 nm). Moreover, the surface charge of MF-assisted CS NPs after functionalization exhibited the lower zeta potential value (~ + 11) than that of samples based on BM (~ + 14) due to occurring the laminar flow through the micro-channels embedded in the MF chip, leading to an increase in the MB adsorption. Subsequently, at the optimized amounts of the dye concentration (89.12 mg L{sup −1}), the adsorbent concentration (1.38 g L{sup −1}), and pH (10.58) by means of Box-Behnken design (BBD) method, the maximum percentage of MB removal by the use of MF-fabricated EA-functionalized CS NPs was 98.4%. By fitting the obtained adsorption data to the isotherm models such as Lagmuir, Freundlich, and Temkin, it has been found that the adsorption mechanism followed the Langmuir model (maximum capacity of the adsorption 384.61 mg/g), which assumed a monolayer coverage of MB molecules as adsorbates over a homogeneous adsorbent surface.

36 MATERIALS SCIENCE↗

Adsorption of Iron(III) and Copper(II) by Bacterial Cellulose from Rhodococcus sp. MI 2

Modified cellulose from the pellicle produced by Rhodococcus sp. MI 2 was more efficient at removing Fe(III) and Cu(II) from aqueous solution than similarly modified cellulose from Komagataeibar xylinus TISTR 998. This study first describes the modification of the cellulose to produce mercerized bacterial cellulose (MBC), phosphorylated bacterial cellulose (PBC), acid–base cellulose and diethylenetriamine bacterial cellulose (EABC). Their efficacy as adsorbents to adsorb Fe(III) and Cu(II) was then determined. In aqueous solution at pH 4 at initial Fe(III) concentration of 20 mg/L, PBC reached adsorption equilibrium within 195 min. At pH 5 in an initial Cu(II) concentration of 75 mg/L, EABC reached adsorption equilibrium within 210 min. Molecular structures and chemical bonds were examined by Fourier transform infrared spectroscopy (FT-IR) and physical morphologies by scanning electron microscopy. The adsorption kinetics of MBC, PBC and EABC showed good agreement with the proposed pseudo-second order model and the adsorption isotherm was best described by the Freundlich model. Our study determined optimal conditions, molecular structures, physical morphologies and adsorption kinetics. The cellulose produced by the new strain Rhodococcus sp. MI 2 was highly efficient at adsorbing and removing metal ions from aqueous solution.

36 MATERIALS SCIENCE↗

Identifying limitations in screening high-throughput photocatalytic bimetallic nanoparticles with machine-learned hydrogen adsorptions

The Sabatier principle is of fundamental importance to computational catalyst discovery, saving researchers time and expense by predicting catalytic activity in silico at scale. However, as polycrystalline and nanoscale catalysts increasingly dominate industry, computational screening tools must be adapted to these uses. In this work, we demonstrate the effectiveness of computational adsorption energy screening in nanocatalysis by comparing a multisite adsorption energy prediction workflow against a large experimental dataset of hydrogen evolution activities over bimetallic nanoparticles. Comparing 16 million hydrogen adsorption energy predictions with the hydrogen evolution activity of 5300 experiments across 84 monometallic and bimetallic systems, we discover that favorable adsorption energies are a necessary condition for experimental activity, but other factors often determine trends in practice. Finally, about half of the bimetallic search space can be excluded from experimental screens using hydrogen adsorption predictions, but this method may become significantly more powerful when combined with other screening tools.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of ionomer adsorption on alkaline hydrogen oxidation activity and fuel cell performance

The adsorption of the ionomer components significantly impacts the activity of hydrogen oxidation reaction (HOR) catalysts under high pH conditions. Two specific adsorptions, i.e., (i) cation-hydroxide-water co-adsorption and (ii) phenyl group adsorption, on the surface of platinum group metal HOR catalysts were identified as the performance-limiting factors for anion-exchange membrane fuel cells (AEMFCs). Here, we review the main characteristics of the surface adsorptions, their impact on the performance of HOR half-cell and AEMFC, and the mitigation strategies. This review emphasizes important aspects in the design of electrocatalysts and ionomers for improved AEMFC performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption of NO on Fe 3 O 4 (111)

Adsorption of NO on Fe 3 O 4 (111) is studied by density functional theory (DFT) calculations. NO is prefer-ably adsorbed atop the octahedral site which has a clearly higher adsorption energy than the tetrahedral site. The difference in adsorption energy correlates with differences in adsorption geometries and NO stretch vibrations. Here, the results are in good agreement with temperature programmed desorption (TPD)and reflection-adsorption IR spectroscopy (RAIRS) measurements and provide an explanation of the observation of only one vibrational mode despite two distinct TPD features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adsorption mechanism of alkyl hydroxamic acid onto bastnäsite: Fundamental steps toward rational collector design for rare earth elements

Rare earth element (REE) production is limited in part by inefficient strategies for beneficiation. Hydroxamic acid ligands are promising reagents for the selective flotation of bastnäsite [(Ce,La)FCO 3 ], a major REE ore mineral, but the mechanism and energetics of adsorption are not understood, interfering with the design of new, more efficient reagents. In this work, the adsorption of octyl hydroxamic acid onto bastnäsite was calculated using a combination of experimental and computational methods. In-situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy revealed changes in the hydroxamate functional group vibrational frequencies, corresponding to chelation with cerium cations at the bastnäsite surface. The results indicate a monodentate chemisorption mechanism at low surface loading that changes to bidentate chemisorption at higher concentrations. This interpretation is supported by molecular vibrational frequency shifts calculated using density functional theory (DFT), and orientation of the hydrocarbon chain measured by sum frequency generation (SFG) vibrational spectroscopy. The binding enthalpies of octyl hydroxamic acid interacting with La and Ce-bastnäsite surfaces were measured using isothermal titration calorimetry (ITC) revealing a stronger coordinating ability with bastnäsite than with a common gangue mineral, calcite (CaCO 3 ). Because octyl hydroxamate favors monodentate adsorption at low surface coverages, the relative chelating strength of metal ions could be a poor predictor for selectivity under monolayer adsorption conditions. At higher surface loadings, where the bidentate mode of adsorption is active, selectivity is likely to be limited by increased flotation of gangue ores.

58 GEOSCIENCES↗

Adsorption mechanisms of cesium at calcium-silicate-hydrate surfaces using molecular dynamics simulations

We report understanding the mechanisms of interactions and immobilization of radionuclides in cement systems at the molecular level is key to developing safe and novel solutions for the long-term storage of nuclear wastes. The molecular level adsorption mechanisms of cesium (Cs + ) ions onto tobermorite 9 Å, tobermorite 14 Å, and jennite – three crystalline structural analogues for calcium-silicate-hydrates, the main components in cement-based materials, were investigated using molecular dynamics (MD) simulations. Convergence monitoring of the simulations, using the root mean square displacement with average correlation analysis, indicated that MD trajectories of 10–15 ns were needed given the size of the selected computational cell to properly capture the dynamic process of adsorption. Cs + ions adsorbed as inner-sphere complexes at the tobermorite surfaces, while they showed lower affinity for jennite. The charge and structure of the surface layer strongly influenced the adsorption mechanisms of Cs + ions. Strong association with the hexagonal cavities of the silica sites were seen at the tetrahedral SiO 4 surface of the tobermorite structures. Cs + ion adsorption was attributed to co-ion adsorption at the octahedral CaO 6 surface of tobermorite 9 Å, cation exchange at that of tobermorite 14 Å, and electrostatic interaction with the surface hydroxyl groups for jennite. Distribution coefficients of Cs + ions onto cement pastes derived from molecular dynamics by taking the surface structure and dynamics of Cs + ions directly into account showed a range of overlap with experimental results.

42 ENGINEERING↗

3D graphene aerogels-supported Ag and Ag@Ag3PO4 heterostructure for the efficient adsorption-photocatalysis capture of different dye pollutants in water

Highlights: • 3D graphene aerogels-supported Ag and Ag@Ag3PO4 heterostructure are synthesized. • The composite is effective in adsorption-photocatalysis cationic and anionic dyes. • The apparent adsorption-photocatalysis removal sequence is NR > RhB > MB > MO. • The contributions of adsorption and photocatalysis is different for different dyes. • The composite exhibits the highest catalytic activities with excellent stability. - Abstract: In this paper, we successfully synthesized 3D graphene aerogels-supported Ag and Ag@Ag{sub 3}PO{sub 4} heterostructure (3D Ag/Ag@Ag{sub 3}PO{sub 4}/GA) by the hetero-growth of Ag{sub 3}PO{sub 4} on partly Ag nanoparticles in macroporous 3D graphene aerogels (3D GA), aiming for the efficient adsorption-photocatalysis capture of both cationic (RhB, MB, and NR) and anionic (MO) dyes from aqueous solutions. For the removal of different dyes, the contributions of adsorption and photocatalysis is different and the apparent removal sequence is NR > RhB > MB > MO on the prepared 3D Ag/Ag@Ag{sub 3}PO{sub 4}/GA. Compared with bare Ag{sub 3}PO{sub 4} particles, Ag{sub 3}PO{sub 4}/GO, and Ag/Ag@Ag{sub 3}PO{sub 4}/GO, the prepared 3D Ag/Ag@Ag{sub 3}PO{sub 4}/GA exhibits the highest catalytic activities for the visible light degradation of RhB and MO. The possible mechanism for improved photocatalytic degradation of dyes by the 3D Ag/Ag@Ag{sub 3}PO{sub 4}/GA is proposed based on the active species trapping experiments. Moreover, the good stability and convenient recycling of the prepared 3D Ag/Ag@Ag{sub 3}PO{sub 4}/GA composite further make it have potential application prospect in eliminating organic contaminants.

36 MATERIALS SCIENCE↗

CO 2 adsorption mechanisms at the ZIF-8 interface in a Type 3 porous liquid

Porous liquids (PLs) are an attractive material for gas separation and carbon sequestration due to their permanent internal porosity and high adsorption capacity. PLs that contain zeolitic imidazole frameworks (ZIFs), such as ZIF-8, form PLs through exclusion of aqueous solvents from the framework pore due to its hydrophobicity. The gas adsorption sites in ZIF-8 based PLs are historically unknown; gas molecules could be captured in the ZIF-8 pore or adsorb at the ZIF-8 interface. To address this question, ab initio molecular dynamics was used to predict CO 2 binding sites in a PL composed of a ZIF-8 particle solvated in a water, ethylene glycol, and 2-methylimidazole solvent system. Further, the results show that CO 2 energetically prefers to reside inside the ZIF-8 pore aperture due to strong van der Waals interactions with the terminal imidazoles. However, the CO 2 binding site can be blocked by larger solvent molecules that have greater adsorption interactions. CO 2 molecules were unable to diffuse into the ZIF-8 pore, with CO 2 adsorption occurring due to binding with the ZIF-8 surface. Therefore, future design of ZIF-based PLs for enhanced CO 2 adsorption should be based on the strength of gas binding at the solvated particle surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Calorimetric measurement of adsorption and adhesion energies of Cu on Pt(111)

The adsorption energies of submonolayer amounts of one metal on the surface of another metal have been measured for decades by temperature programmed desorption. However, that method fails for metals that alloy. We report here the first measurement of the adsorption energy for any such metal-on-metal combination that forms a bulk alloy. The adsorption and interfacial energetics of vapor deposited Cu onto Pt(111) at 300 K has been studied herein using single crystal adsorption calorimetry (SCAC) and X-ray photoelectron spectroscopy (XPS). The Cu grows as 2D pseudomorphic islands in the first layer and its heat of adsorption decreased linearly from 358 to 339 kJ/mol. This is attributed to increasing lattice strain with island size, associated with the small lattice mismatch (8%). It adsorbs ~2 kJ/mol more weakly in the 2nd layer than above 3 ML, where it reaches the bulk heat of sublimation of Cu(solid), 337 kJ/mol. The adhesion energy of multilayer Cu onto Pt(111) is 3.76 J/m 2 . The extra stability of the first Cu monolayer compared to bulk Cu measured here is ~12 kJ/mol, compared to a difference of ~83 kJ/mol for underpotential deposition of Cu on a Pt(111) electrode, with the difference attributed to stronger bonding of Cu to the solvent and double layer compared to Pt.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO adsorption on MnO(100): Experimental benchmarks compared to DFT

In this study, CO adsorption on the MnO(100) surface was studied using temperature programmed desorption (TPD) and density functional theory (DFT). TPD results show that CO is weakly-bound on MnO(100), with an experimental adsorption energy of -35.6 ± 2.1 kJ/mol at terrace sites in the low coverage limit. PBE simulations suggest that CO adsorption causes an implausible (2 × 2) surface reconstruction. PBE+U simulations show no signs of surface reconstruction, and provide an accurate estimate of the adsorption energy (-36.4 kJ/mol) when combined with the DFT-D3 method with Becke-Jonson damping to correct for van der Waals interactions. This simulation also shows that CO adsorbs C-down onto the Mn 2+ terrace site in a tilted geometry, which is also observed experimentally and computationally on the similarly-structured NiO(100) transition metal oxide surface. TPD results for large doses show a plateauing of the coverage at about 0.4 monolayers of CO at 85 K, with a defect coverage equivalent to 0.08 monolayers. Adsorption associated with defect sites is indicated by a high-temperature desorption tail which is not satisfactorily explained by DFT simulations of simple step or oxygen vacancy defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular Determination of Organic Adsorption Sites on Smectite during Fe Redox Processes Using ToF-SIMS Analysis

Turnover of soil organic carbon (SOC) is strongly affected by a balance between mineral protection and microbial degradation. However, the mechanisms controlling the heterogeneous and preferential adsorption of different types of SOC remain elusive, especially for humic substrates (HSs) and microbial carbon (MC), two hotly-debated forms of SOC prevalent in soils. In this work, the heterogeneous adsorption of HSs and MC on a clay mineral (nontronite NAu-2) during microbial-mediated Fe redox cycling was determined with the use of time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results revealed that HSs pre-adsorbed on NAu-2 would partially inhibit the microbial Fe(III) reduction and structural modification of NAu-2, thus retarding the subsequent adsorption of MC. In contrast, NAu-2 without pre-coated HSs was adsorbed by a significant amount of MC from microbial polysaccharides as a result of Fe(III) reduction. This was attributed to the deposition of a thin Al-rich layer on clay surface, which provided active sites for MC adsorption. This study provides direct and detailed molecular evidence for the first time to explain the preferential adsorption of MC over HSs on the surface of clay minerals in the iron redox processes, which could be critical for the preservation of MC in soil. The results also indicate that ToF-SIMS is a unique tool for understanding complex organic-mineral-microbe interactions.

54 ENVIRONMENTAL SCIENCES↗

Tuning the Kinetic Water Stability and Adsorption Interactions of Mg-MOF-74 by Partial Substitution with Co or Ni

Varying amounts of Co and Ni were substituted into the metal–organic framework Mg-MOF-74 via a one-pot solvothermal reaction, and the effects of these substitutions on CO 2 adsorption and kinetic water stability properties were examined. Based on elemental analyses, Co and Ni are more favorably incorporated into the MOF-74 framework from solution than Mg. In addition, reaction temperature more strongly impacts the final metal composition in these mixed-metal (MM) MOF-74 structures than does the reaction solvent composition. Single-component CO 2 adsorption isotherms were measured for the MM-MOF-74 systems at 5, 25, and 45 °C, and isosteric heats of adsorption were calculated. These results suggest that CO 2 adsorption properties can be adjusted by partial metal substitution. Water adsorption isotherms were also measured for the MM-MOF-74 samples, with powder X-ray diffraction patterns and Brunauer–Emmett–Teller surface areas measured both before and after water exposure. Results show that Mg-MOF-74 can gain partial kinetic water stability by the incorporation of Ni 2+ or Co 2+ metal ions that are less vulnerable to hydrolysis than Mg 2+ . Finally, of particular note, Mg–Ni-MM-MOF-74 shows a significant increase in water stability when incorporating as little as 16 mol % Ni into the Mg-MOF-74 structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Screening of Metal Catecholates for Adsorption of Toxic Pnictogen Hydride Gases

Density functional theory was used to study interactions between phosphine and 17 functional groups, revealing that only the functional groups containing metal ions bind phosphine strongly. This led to a detailed examination of the adsorption of the pnictogen hydride gases ammonia, phosphine, and arsine on 33 metal catecholates in order to examine periodic trends in the binding strength for these adsorbates. Phosphine and arsine adsorption is primarily driven by donation of electron density from the adsorbate molecule to the metal atom, while ammonia binding involves both electron donation and a significant Coulomb attraction between the negatively charged N atom and the positive metal atom. This Coulomb effect results in notably different binding behavior for ammonia than for phosphine and arsine, which are quite similar to each other. Generally, for metals on the left side of the periodic table, the Coulomb effect dominates in ammonia adsorption, and metals on the right side of the periodic table have lower positive charge and accept greater amounts of electron density, making the electron-sharing contribution more important to the binding strength. We find that more electronegative metals, particularly Pd, Ir, Pt, and Au, which accept more electron density from the adsorbate, yield the best selectivity for the target molecules over water because water adsorption is mostly due to Coulomb attraction. We also analyze changes in the d orbital occupancy upon ammonia and phosphine adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Selective Carbon Dioxide Adsorption by Two Robust Microporous Coordination Polymers

In the present work we report the design, synthesis, crystal structure determination, and adsorption properties of two new cadmium-based porous coordination polymers, [Cd(pda) 0.5 (spiro-4-py) 0.5 (HCOO)]•2H 2 O•DMF (compound 1, pda = p-phenylenediacetate, spiro- 4-py = (2,2’,7,7’-tetra(pyridin-4-yl)-9,9’-spirobi[fluorene], DMF = N,N’-dimethylformamide) and [Cd 2 (pda)(spiro-4-py)(CH 3 COO) 2 ]•DMA (compound 2, DMA = N,N’-dimethylacetamide) with similar structures. The coordination between cadmium and two organic linkers, pda and spiro-4-py, has yielded two-dimensional frameworks with rhombic openings. Stacking of these two-dimensional networks does not block the openings but rather results in permanent porosity with one-dimensional channels in the final structures. The permanent porosity of these compounds is confirmed by gas adsorption measurements. Compounds 1 and 2 have BET (Brunauer-Emmett-Teller) surface areas of 687 and 584 m 2 /g, respectively. Both compounds show favorable adsorption towards carbon dioxide over other light gases such as nitrogen, oxygen, and carbon monoxide. IAST (Ideal adsorbed solution theory) is employed to predict the adsorption selectivity of binary gas mixtures. Though compounds 1 and 2 possess similar structures, differences are observed in their gas adsorption behaviors, which can be attributed to their different terminal ligands of formate and acetate, respectively. Strikingly, both compounds show exceptionally high stability in aqueous media with a wide pH range, a characteristic that is highly desirable for gas separation-related applications. The robustness of these structures suggests that the use of hydrophobic spiro based multipyridine ligands can lead to water stable frameworks built on late-transition metals that are otherwise sensitive to moisture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correction to Selective Carbon Dioxide Adsorption by Two Robust Microporous Coordination Polymers

In the present work we report the design, synthesis, crystal structure determination, and adsorption properties of two new cadmium-based porous coordination polymers, [Cd(pda)0.5(spiro-4-py)0.5(HCOO)]•2H2O•DMF (compound 1, pda = p-phenylenediacetate, spiro- 4-py = (2,2’,7,7’-tetra(pyridin-4-yl)-9,9’-spirobi[fluorene], DMF = N,N’-dimethylformamide) and [Cd2(pda)(spiro-4-py)(CH3COO)2]•DMA (compound 2, DMA = N,N’-dimethylacetamide) with similar structures. The coordination between cadmium and two organic linkers, pda and spiro-4-py, has yielded two-dimensional frameworks with rhombic openings. Stacking of these two-dimensional networks does not block the openings but rather results in permanent porosity with one-dimensional channels in the final structures. The permanent porosity of these compounds is confirmed by gas adsorption measurements. Compounds 1 and 2 have BET (Brunauer-Emmett-Teller) surface areas of 687 and 584 m 2 /g, respectively. Both compounds show favorable adsorption towards carbon dioxide over other light gases such as nitrogen, oxygen, and carbon monoxide. IAST (Ideal adsorbed solution theory) is employed to predict the adsorption selectivity of binary gas mixtures. Though compounds 1 and 2 possess similar structures, differences are observed in their gas adsorption behaviors, which can be attributed to their different terminal ligands of formate and acetate, respectively. Strikingly, both compounds show exceptionally high stability in aqueous media with a wide pH range, a characteristic that is highly desirable for gas separation-related applications. The robustness of these structures suggests that the use of hydrophobic spiro based multipyridine ligands can lead to water stable frameworks built on late-transition metals that are otherwise sensitive to moisture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring Structure-Sensitive Relations for Small Species Adsorption Using Machine Learning

Accurate prediction of adsorption energies on heterogeneous catalyst surfaces is crucial to predicting reactivity and screening materials. Adsorption linear scaling relations have been developed extensively but often lack accuracy and apply to one adsorbate and a single binding site type at a time. These facts undermine their ability to predict structure sensitivity and optimal catalyst structure. Using machine learning on nearly 300 density functional theory calculations, we demonstrate that generalized coordination number scaling relations hold well for oxygen- and high-valency carbon-binding species but fail for others. Here we reveal that the valency and the electronic coupling of a species with the surface, along with the site type and its coordination environment, are critical for small species adsorption. The model simultaneously predicts the adsorption energy and preferred site and significantly outperforms linear scalings in accuracy. It can expose the structure sensitivity of chemical reactions and enable enhanced catalyst activity via engineering particle shape and facet defects. The generality of our methodology is validated by training the model with transition metal data and transferring it to predict adsorption energies on single-atom alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗