Sorbent materials for rapid remediation of wash water during radiological event relief
Not Available
Jolin, William C. (ORCID:0000000261203632)↗
SEARCH · Engineering Papers
Results for “waters”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Potential Chemical Impacts of CO2 Leakage on Underground Source of Drinking Water Assessed by Quantitative Risk Analysis
Many geologic carbon storage site options include not only excellent storage reservoirs bounded by effective seal layers, but also Underground Sources of Drinking Water (USDWs). An effective risk assessment and mitigation plan provides maximum protection for USDWs, to respect not only current policy but also to accommodate likely future USDW-specific regulatory protections. The goal of this study is to quantify possible risks to USDWs, specifically risks associated with chemical impacts on USDWs. Reactive transport models involve tremendous computational expense. Therefore, a secondary purpose of this study is to develop, calibrate and test reduced order models specifically for assessing risks of USDW chemical impacts by CO2 leakage from a storage reservoir. In order to achieve these goals, a geochemical model was developed to interpret changes in water chemistry following CO2 intrusion. A response surface methodology (RSM) based on these geochemical simulations was used to quantify associated risks. The case study example for this analysis is the Ogallala aquifer overlying the Farnsworth unit (FWU), an active commercial-scale CO2-enhanced oil recovery field. Specific objectives of this study include: (1) to understand how CO2 leakage is likely to influence geochemical processes in aquifer sediments; (2) to quantify potential risks to the Ogallala groundwater aquifer due to CO2 leakage from the FWU oil reservoir; and (3) to identify water chemistry factors for early detection criteria. Results indicate that the leakage rate would most likely range between 10-14 – 10-10 kg/(m2·year) for typical and likely leakage pathway permeability ranges. Within this range of CO2 leakage rate, groundwater quality is not likely to be significantly impacted. The worst-case scenario yields trace metal concentrations approximately twice as much as the initial value, but these predicted concentrations are still less than one-fifth of regulation-stipulated maximum contamination levels and do not exceed the no-impact thresholds. Finally, the results of this analysis suggest that pH may be an effective geochemical indicator of CO2 leakage.
CO2 leakage, USDWs, Groundwater quality, Risk anal↗
Deformation band corrosion as a result of applied stress and cold-work in 304 stainless steel in simulated pressurized water reactor primary water conditions
Stainless steels like 304SS are commonly used in pressurized water reactor primary water environments due to their excellent resistance to stress corrosion cracking (SCC). However, SCC susceptibility has been observed in cold-worked 304SS. Cold-rolling introduces a high density of defects, such as deformation bands or dislocations, into the microstructure; applied stress, even if macroscopically below the yield stress, can result in regions with high localized stresses. Cold-worked and non-cold-worked samples were exposed to 360 °C simulated PWR primary water for 1500 h with and without active loading. Corrosion susceptibility of dislocations and deformation bands induced by cold-rolling and/or applied stress was studied using high-resolution (analytical) transmission electron microscopy. Deformation bands were generated in all specimens examined in the study. Penetrative oxidation was observed in some deformation bands in each specimen. The depth of penetrative deformation band oxidation frequently exceeded the depth of grain boundary oxidation in all specimens. However, deformation band oxides generally were narrowly confined to the deformation band plane. Highly Ni-rich regions were observed beyond all oxidation fronts. Surface oxides were thicker in the specimens exposed under active loading. In conclusion, the implications of these findings at surfaces for deformation bands intersecting stress corrosion crack paths are discussed.
EFTEM↗
Favorable Redox Thermodynamics of SrTi 0.5 Mn 0.5 O 3–δ in Solar Thermochemical Water Splitting
Two-step, solar thermochemical splitting of water using nonstoichiometric redox-active metal oxides has emerged as an intriguing approach for large-scale hydrogen production. Perovskites have been proposed as alternatives to state-of-the-art fluorite CeO 2–δ because of their potential for lowering reduction temperature while maintaining high fuel productivity. Guided by computational insights, we explore the thermodynamic properties and water splitting efficacy of the cubic perovskite SrTi 0.5 Mn 0.5 O 3–δ (STM55). Thermogravimetric analysis is performed under controlled oxygen partial pressures (pO 2 ) and temperatures up to 1500 °C, from which both the enthalpy and entropy of reduction as a function of oxygen nonstoichiometry are determined. STM55 provides an attractive combination of moderate enthalpy, 200–250 kJ (mol-O) –1 , and high entropy, with unusual δ dependence. Using a water splitting cycle in which the material is thermally reduced at 1350 °C (pO 2 , ~10 –5 atm) and subsequently exposed to steam at 1100 °C (steam partial pressure of pH 2 O = 0.4 atm), we demonstrate a hydrogen yield of 7.4 mL g –1 . Through both half-cycles, the material remains largely in quasi-equilibrium with the gas phase, as reflected in the agreement of the measured data with predicted profiles based on the thermodynamic data. This behavior indicates rapid surface and bulk diffusion kinetics. Cyclic operation showed the material to be free of degradation and always resulted in a 2:1 yield of H 2 /O 2 . Altogether, STM55 provides outstanding performance characteristics for thermochemical hydrogen production.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Electric Field Effects on Water and Ion Structure and Diffusion at the Orthoclase (001)–Water Interface
Understanding the electrochemical properties of mineral–water interfaces tends to rely upon electrical double layer (EDL) models, but these models are based on the assumption that electrostatic equilibrium is constantly maintained. In reality, interfacial reactions, ion diffusion, and their electrochemical signatures are based in nonequilibrium conditions of locally or globally imbalanced electrical fields where current EDL models have limited purview. In this work, we performed molecular dynamics (MD) simulations of the orthoclase (001) surface in contact with a 1 M NaCl aqueous solution under various electric fields, to explore the interplay between EDL structure and dynamics when perturbed by electric fields of different direction and strength, by confinement, and by different distributions of structural surface charge. The simulations showed that confinement between two opposing (001) surfaces led to the development of an induced field when the applied field was perpendicular to the surfaces and, as a result, to ionic diffusion coefficients that were independent of electric field strength. In contrast, when the applied field was parallel to the surfaces, confinement resulted in ionic diffusion coefficients that were more strongly dependent on the magnitude of the electric field than in bulk water. Differences in the density and distribution of aluminol groups on the two surfaces had a significant impact on how the interfacial structure and dynamics varied in the presence of an electric field. Notably, these differences resulted in an electro-osmotic flow with opposite directions at the two surfaces under parallel applied electric field. Overall, the MD simulations highlighted the importance of considering atomic-level structure and heterogeneities when developing models of the electrochemical properties of mineral–water interfaces.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanisms and Reactivity of Tl(III) Main-Group-Metal–Alkyl Functionalization in Water
Metal-mediated C–H activation reactions generate metal–alkyl intermediates that can be converted into carbon–oxygen bonds through functionalization reactions. Although the mechanisms and reactivity of C–H activation reactions have been well studied for transition-metal complexes, much less is known about functionalization reactions, especially for main-group-metal–alkyl complexes. Here we report density functional theory calculations on the reaction thermodynamics and kinetic pathways for main-group, p-block-metal Tl III –methyl functionalization reactions in water using a combination of continuum and explicit/continuum solvent models. Particularly, we examined the oxygen functionalization of (OAc)Tl III (CH 3 ) 2 and (OAc) 2 Tl III (CH 3 ) in water where in both cases functionalization gives methyl acetate and methanol. Our calculations suggest that (OAc)Tl III (CH 3 ) 2 is thermodynamically and kinetically stable against bond homolysis, heterolysis, protonolysis, and all reductive functionalization pathways. Functionalization is only possible after methyl anion group transfer to Tl III (OAc) 3 to give (OAc) 2 Tl III (CH 3 ). Our calculations indicate that this monomethyl structure is functionalized by acetate dissociation to give a Tl monocation and then a one-step nucleophilic functionalization where water and acetate have competitive transition states.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Water or Anion? Uncovering the Zn 2+ Solvation Environment in Mixed Zn(TFSI) 2 and LiTFSI Water-in-Salt Electrolytes
Applications of aqueous zinc batteries for grid-scale energy storage are limited by their poor reversibility and the competing water splitting reaction. The recent invention of a water-in-salt (WIS) electrolyte concept provides a new route enabling a stable and highly reversible aqueous zinc battery chemistry. In the present work, a mixed zinc bis(trifluoromethane sulfonyl)imide (Zn(TFSI) 2 ) and LiTFSI WIS electrolyte was studied using X-ray total scattering, X-ray absorption, and Fourier transform infrared spectroscopy in conjunction with classical molecular dynamics simulations. It was found that, in the highly concentrated WIS electrolyte consisting of 1 m Zn(TFSI) 2 and 20 m LiTFSI, Zn 2+ cations are mainly solvated by six waters in their first solvation shell, while the TFSI – anions are completely excluded. This ion solvation picture is fundamentally different from the previous understandings. The results suggest that additional studies are needed to fully understand the unusual stability and reversibility of zinc-WIS electrolyte-based batteries.
25 ENERGY STORAGE↗
Assessing the Impacts of Recent Crop Expansion on Water Quality in the Missouri River Basin Using the Soil and Water Assessment Tool
The Missouri River Basin (MORB) has experienced a resurgence of grassland conversion to crop production, which raised concerns on water quality. We applied the Soil and Water Assessment Tool (SWAT) to address how this conversion would impact water quality. We designed three crop production scenarios representing conversion of grassland to: (a) continuous corn; (b) corn/soybean rotation; and (c) corn/wheat rotation to assess the impact. The SWAT model results showed: (a) the lower MORB produced high total nitrogen (TN) and total phosphorus (TP) load before conversion (baseline) due mainly to high precipitation and high agricultural activity; (b) the greatest percentage increases of TN and TP occurred in the North and South Dakotas, coinciding with the highest amount of grassland conversion to cropland; and (c) grassland conversion to continuous corn resulted in the greatest increase in TN and TP loads, followed by conversion to corn/soybean and then conversion to corn/wheat. Although the greatest percentage increases of TN and TP occurred in the North and South Dakotas, these areas still contributed relatively low TN and TP to total basin loads after conversion. However, watersheds, predominantly in the lower MORB continued to be “hotspots” that contributed the greatest amounts of TN and TP to the total basin loads—driven by a combination of grassland conversion, high precipitation, and loading from pre-existing cropland. At the watershed outlet, the TN and TP loads were increased by 6.4% (13,800 t/yr) and 8.7% (3,400 t/yr), respectively, during the 2008–2016 period for the conversion to continuous corn scenario.
54 ENVIRONMENTAL SCIENCES↗
A molecular catalyst for water oxidation that binds to metal oxide surfaces
Explore the source record for details and available documents.
catalysis (homogeneous), catalysis (heterogeneous)↗
A water activity based model of heterogeneous ice nucleation kinetics for freezing of water and aqueous solution droplets
Immersion freezing of water and aqueous solutions by particles acting as ice nuclei (IN) is a common process of heterogeneous ice nucleation which occurs in many environments, especially in the atmosphere where it results in the glaciation of clouds. Here we experimentally show, using a variety of IN types suspended in various aqueous solutions, that immersion freezing temperatures and kinetics can be described solely by temperature, T , and solution water activity, a w , which is the ratio of the vapour pressure of the solution and the saturation water vapour pressure under the same conditions and, in equilibrium, equivalent to relative humidity (RH). This allows the freezing point and corresponding heterogeneous ice nucleation rate coefficient, J het , to be uniquely expressed by T and a w , a result we term the aw based immersion freezing model (ABIFM). This method is independent of the nature of the solute and accounts for several varying parameters, including cooling rate and IN surface area, while providing a holistic description of immersion freezing and allowing prediction of freezing temperatures, J het , frozen fractions, ice particle production rates and numbers. Our findings are based on experimental freezing data collected for various IN surface areas, A , and cooling rates, r , of droplets variously containing marine biogenic material, two soil humic acids, four mineral dusts, and one organic monolayer acting as IN. For all investigated IN types we demonstrate that droplet freezing temperatures increase as A increases. Similarly, droplet freezing temperatures increase as the cooling rate decreases. The log 10 (J het ) values for the various IN types derived exclusively by T and a w , provide a complete description of the heterogeneous ice nucleation kinetics. Thus, the ABIFM can be applied over the entire range of T , RH, total particulate surface area, and cloud activation timescales typical of atmospheric conditions. Finally, we demonstrate that ABIFM can be used to derive frozen fractions of droplets and ice particle production for atmospheric models of cirrus and mixed phase cloud conditions.
54 ENVIRONMENTAL SCIENCES↗
Iridium-based complexes for water oxidation
Organometallic Ir precatalysts have been found to yield homogeneous Ir-based water-oxidation catalysts (WOCs) with very high activity. The Cp*Ir catalyst series can operate under a variety of regimes: it can either act as a homogeneous or a heterogeneous catalyst; it can be driven by chemical, photochemical, or electrochemical methods; and the molecular catalyst can either act in solution or supported as a molecular unit on a variety of solid oxides. In addition to optimizing the various reaction conditions, work has continued to elucidate the catalyst activation mechanism and identify water-oxidation intermediates. Furthermore, this Perspective will describe the development of the Cp*Ir series, their many forms as WOCs, and their ongoing characterization.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Proton transfer in acetaldehyde–water clusters mediated by a single water molecule
Proton transfer in aqueous media is a ubiquitous process, occurring in acid–base chemistry, biology, and in atmospheric photochemistry. Photoionization mass spectrometry coupled with theoretical calculations demonstrate that a relay-type proton transfer mechanism is operational for single-water-molecule-assisted proton transfer between two acetaldehyde molecules in the gas phase. Threshold photoionization of acetaldehyde–water clusters leads to proton transfer between the formyl groups (–CH=O) of one acetaldehyde molecule to another, and the subsequent formation of cationic moieties. Density functional theory computations reveal several plausible pathways of proton transfer in mixed cluster cations. Among these pathways, water-mediated proton transfer is energetically favored. Finally, mass spectra and photoionization efficiency curves confirm these theoretical findings and also demonstrate the increased stability of cluster cations where acetaldehyde molecules are symmetrically bonded to the hydronium ion.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structure of water-in-salt and water-in-bisalt electrolytes
We report a systematic diffraction study of two “water-in-salt” electrolytes and a “water-in-bisalt” electrolyte combining high-energy X-ray diffraction (HEXRD) with polarized and unpolarized neutron diffraction (ND) on both H 2 O and D 2 O solutions. The measurements provide three independent combinations of correlations between the different pairs of atom types that reveal the short- and intermediate-range order in considerable detail. The ND interference functions show pronounced peaks around a scattering vector Q ~ 0.5 Å -1 that change dramatically with composition, indicating significant rearrangements of the water network on a length scale around 12 Å. The experimental results are compared with two sets of Molecular Dynamics (MD) simulations, one including polarization effects and the other based on a non-polarizable force field. The two simulations reproduce the general shapes of the experimental structure factors and their changes with concentration, but differ in many detailed respects, suggesting ways in which their force fields might be modified to better represent the actual systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Universal scaling of potential energy functions describing intermolecular interactions. II. The halide-water and alkali metal-water interactions
The scaled versions of the newly introduced [S. S. Xantheas and J. C. Werhahn, J. Chem. Phys.141, 064117 (2014)] generalized forms of some popular potential energy functions (PEFs) describing intermolecular interactions – Mie, Lennard-Jones, Morse, and Buckingham exponential-6 – have been used to fit the ab initio relaxed approach paths and fixed approach paths for the halide-water, X - (H 2 O), X = F, Cl, Br, I, and alkali metal-water, M + (H 2 O), M = Li, Na, K, Rb, Cs, interactions. The generalized forms of those PEFs have an additional parameter with respect to the original forms and produce fits to the ab initio data that are between one and two orders of magnitude better in the χ 2 than the original PEFs. They were found to describe both the long-range, minimum and repulsive wall of the respective potential energy surfaces quite accurately. Overall the 4-parameter extended Morse (eM) and generalized Buckingham exponential-6 (gBe-6) potentials were found to best fit the ab initio data for these two classes of ion-water interactions. Finally, the fitted values of the parameter of the (eM) and (gBe-6) PEFs that control the repulsive wall of the potential correlate remarkably well with the ionic radii of the halide and alkali metal ions.
Werhahn, Jasper C.↗
Hexagonal boron nitride and water interaction parameters
The study of hexagonal boron nitride (hBN) in microfluidic and nanofluidic applications at the atomic level requires accurate force field parameters to describe the water-hBN interaction. In this work, we begin with benchmark quality first principles quantum Monte Carlo calculations on the interaction energy between water and hBN, which are used to validate random phase approximation (RPA) calculations. We then proceed with RPA to derive force field parameters, which are used to simulate water contact angle on bulk hBN, attaining a value within the experimental uncertainties. This paper demonstrates that end-to-end multiscale modeling, starting at detailed many-body quantum mechanics and ending with macroscopic properties, with the approximations controlled along the way, is feasible for these systems.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Ultrafast nonthermal heating of water initiated by an X-ray Free-Electron Laser
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗