Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vertical orientation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Hydraulic fracturing experiments at 1500 m depth in a deep mine: Highlights from the kISMET project

In support of the U.S. DOE SubTER Crosscut initiative, we established a field test facility in a deep mine and designed and carried out in situ hydraulic fracturing experiments relevant to enhanced geothermal systems (EGS) in crystalline rock to characterize the stress field, understand the effects of rock fabric on fracturing, and gain experience in monitoring using geophysical methods. The project also included pre- and post-fracturing simulation and analysis, and laboratory measurements and experiments. The kISMET (permeability (k) and Induced Seismicity Management for Energy Technologies) site was established in the West Access Drift of the Sanford Underground Research Facility (SURF) 4757 ft (1450 m) below ground (on the 4850 ft level (4850L)) in phyllite of the Precambrian Poorman Formation. We drilled and continuously cored five near-vertical boreholes in a line on 3 m (10 ft) spacing, deviating the two outermost boreholes slightly to create a five-spot pattern around the test borehole centered in the test volume 40 m below the drift invert (floor) at a total depth of ~1490 m (4890 ft). Laboratory measurements of core from the center test borehole showed P-wave velocity heterogeneity along each core indicating strong, fine-scale (~1 cm or smaller) changes in the mechanical properties of the rock. Field measurements of the stress field by hydraulic fracturing showed that the minimum horizontal stress at the kISMET site averages 21.7 MPa (3146 psi) trending approximately N-S (356 degrees azimuth) and plunging slightly NNW at 12°. The vertical and horizontal maximum stresses are similar in magnitude at 42-44 MPa (6090-6380 psi) for the depths of testing, which averaged approximately 1530 m (5030 ft). Hydraulic fractures were remarkably uniform suggesting core-scale and larger rock fabric did not play a role in controlling fracture orientation. Analytical solutions suggest that the fracture radius of the large fracture (stimulation test) was more than 6 m (20 ft), depending on the unknown amount of leak-off.

Oldenburg, C↗
DOE OSTI2024

Tailoring Growth Interfaces of Virtual Substrates for Power Electronics

Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point. AlxGa1-xN ranks high among candidate materials, having bipolar dopability, thermal and chemical stability and an ultra-wide bandgap. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees C. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers. (1) R. J. in a face-to-face configuration, as illustrated in the schematic at left. Kaplar et al 2017, ECS J. Solid State Sci. Technol. 6 Q3061; (2) D. M. Roberts et al 2022, https://arxiv.org/abs/2208.11769; (3) T. Aizawa et al 2008, J Crys Growth 310, 1 22; (4) R. Liu et al 2002, Appl. Phys. Lett. 81, 3182-3184.

ENGINEERING↗
NASA NTRS2001

Ocular counterrolling induced by centrifugation during orbital space flight

During the 1998 Neurolab mission (STS-90), four astronauts were exposed to interaural centripetal accelerations (Gy centrifugation) of 0.5 g and 1 g during rotation on a centrifuge, both on Earth and during orbital space flight. Subjects were oriented either left-ear out or right-ear out, facing or back to motion. Binocular eye movements were measured in three dimensions using a video technique. On Earth, tangential centrifugation that produces 1 g of interaural linear acceleration combines with gravity to tilt the gravitoinertial acceleration (GIA) vector 45 degrees in the roll plane relative to the head vertical, generating a summed vector of 1.4 g. Before flight, this elicited mean ocular counterrolling (OCR) of 5.7 degrees. Due to the relative absence of gravity during flight, there was no linear acceleration along the dorsoventral axis of the head. As a result, during in-flight centrifugation, gravitoinertial acceleration was strictly aligned with the centripetal acceleration along the interaural axis. There was a small but significant decrease (mean 10%) in the magnitude of OCR in space (5.1 degrees). The magnitude of OCR during postflight 1 g centrifugation was not significantly different from preflight OCR (5.9 degrees). Findings were similar for 0.5 g centrifugation, but the OCR magnitude was approximately 60% of that induced by centrifugation at 1 g. OCR during pre- and postflight static tilt was not significantly different and was always less than OCR elicited by centrifugation of Earth for an equivalent interaural linear acceleration. In contrast, there was no difference between the OCR generated by in-flight centrifugation and by static tilt on Earth at equivalent interaural linear accelerations. These data support the following conclusions: (1) OCR is generated predominantly in response to interaural linear acceleration; (2) the increased OCR during centrifugation on Earth is a response to the head dorsoventral 1 g linear acceleration component, which was absent in microgravity. The dorsoventral linear acceleration could have activated either the otoliths or body-tilt receptors that responded to the larger GIA magnitude (1.4 g), to generate the increased OCR during centrifugation on Earth. A striking finding was that magnitude of OCR was maintained throughout and after flight. This is in contrast to most previous postflight OCR studies, which have generally registered decreases in OCR. We postulate that intermittent exposure to artificial gravity, in the form of the centripetal acceleration experienced during centrifugation, acted as a countermeasure to deconditioning of this otolith-ocular orienting reflex during the 16-day mission.

Non-NASA Center↗
NASA NTRS1985

Studies on Physical Properties of Snow Based on Multi Channel Microwave Radiometer

The analysis of the data observed over a snow field with a breadboard model of MSR (microwave scanning radiometer) to be installed in MOS-1 (Marine Observation Satellite-1) indicates that: (1) the influence of incident angle on brightness temperature is larger in horizontal polarization component than in vertical polarization component. The effect of incident angle depends upon the property of snow with larger value for dry snow; (2) the difference of snow surface configuration consisting of artifically made parallel ditches of 5 cm depth and 5 cm width with spacing of 10 and 30 cm respectively which are oriented normal to electrical axis do not affect brightness temperature significantly; and (3) there is high negative correlation between brightness temperature and snow depth up to the depth of 70 cm which suggests that the snow depth can be measured with a two channel microwave radiometer up to this depth.

Tsuchiya, K.↗
NASA NTRS1988

Radiation transfer in plant canopies - Scattering of solar radiation and canopy reflectance

The one-dimensional vertical model of radiation transfer in a plant canopy described by Verstraete (1987) is extended to account for the transfer of diffuse radiation. This improved model computes the absorption and scattering of both visible and near-infrared radiation in a multilayer canopy as a function of solar position and leaf orientation distribution. Multiple scattering is allowed, and the spectral reflectance of the vegetation stand is predicted. The results of the model are compared to those of other models and actual observations.

Verstraete, Michel M.↗
NASA NTRS2009

Solid Rocket Booster Large Main and Drogue Parachute Reliability Analysis

The parachutes on the Space Transportation System (STS) Solid Rocket Booster (SRB) are the means for decelerating the SRB and allowing it to impact the water at a nominal vertical velocity of 75 feet per second. Each SRB has one pilot, one drogue, and three main parachutes. About four minutes after SRB separation, the SRB nose cap is jettisoned, deploying the pilot parachute. The pilot chute then deploys the drogue parachute. The drogue chute provides initial deceleration and proper SRB orientation prior to frustum separation. At frustum separation, the drogue pulls the frustum from the SRB and allows the main parachutes that are mounted in the frustum to unpack and inflate. These chutes are retrieved, inspected, cleaned, repaired as needed, and returned to the flight inventory and reused. Over the course of the Shuttle Program, several improvements have been introduced to the SRB main parachutes. A major change was the replacement of the small (115 ft. diameter) main parachutes with the larger (136 ft. diameter) main parachutes. Other modifications were made to the main parachutes, main parachute support structure, and SRB frustum to eliminate failure mechanisms, improve damage tolerance, and improve deployment and inflation characteristics. This reliability analysis is limited to the examination of the SRB Large Main Parachute (LMP) and drogue parachute failure history to assess the reliability of these chutes. From the inventory analysis, 68 Large Main Parachutes were used in 651 deployments, and 7 chute failures occurred in the 651 deployments. Logistic regression was used to analyze the LMP failure history, and it showed that reliability growth has occurred over the period of use resulting in a current chute reliability of R = .9983. This result was then used to determine the reliability of the 3 LMPs on the SRB, when all must function. There are 29 drogue parachutes that were used in 244 deployments, and no in-flight failures have occurred. Since there are no observed drogue chute failures, Jeffreys Prior was used to calculate a reliability of R =.998. Based on these results, it is concluded that the LMP and drogue parachutes on the Shuttle SRB are suited to their mission and changes made over their life have improved the reliability of the parachute.

Clifford, Courtenay B.↗
NASA NTRS2016

Neural Mechanisms to the Space Environment

Highly conserved neural systems have evolved to sense the inertial forces due to head translation and head tilt relative to gravitational vertical. These structures consist of ciliated mechanosensitive receptor cells inserted into a neuroepithelium surmounted by biomineral grains of calcium carbonate (CaCO3) called oto- (vertebrates) or stato-conia (invertebrates). Detection of these forces by receptor cells relies on the CaCO3 mass being weighted in Earths 1G. A change in gravity or orientation with respect to gravity has a profound effect on how an organism interacts with its environment, and it is evident that the nervous system responds to the new gravity state. This response might involve the peripheral receptors, the CaCO3 mass, the brain or any combination of these mechanisms based on the intensity and duration of the gravity change. Here, we examine the arguments supporting the different mechanisms of adaptation to the space environment. First, a pre- or post-synaptic alteration in the strength of synaptic transmission between the receptor cell and nerve afferent can adjust the system output. The number of synaptic ribbons in certain type II hair cells in rodent is labile, increasing following exposure to microgravity. An increase in number of synaptic ribbons in toadfish otolith hair cells following exposure to microgravity could potentially explain the observed afferent hypersensitivity to acceleration postflight. The physiological findings in the isolated statocyst in snails are in line with the vertebrate data, and conform to the proposition that G exposure leads to changes in gravireceptor function. At the same time this similarity in neural response to G exposure between the vertebrates and invertebrates is intriguing: the increased neural sensitivity in the vertebrate was detected in the nerve afferents, one synapse away from the receptor cell, whereas the increased neural sensitivity observed in the snail was detected directly at the receptor level. Second, the CaCO3 mass provides mechanical loading of receptor cell cilia, and their density alters sensitivity. A widely considered mechanism by which the animal responds to a chronic change in amplitude of gravity is a change in weight-lending CaCO3 mass. In G, it is argued, the organism counters the loss of gravity by increasing CaCO3 production, thereby increasing its mass, as a means to increase system gain. In hypergravity, the converse is argued. Earlier evidence in mollusks and recent results in mice suggest a remodeling might occur, especially after long-term space exposure. Lastly, we have to distinguish at least two kinds of neural feedbacks. One is connected with local mechanisms of self-regulation and specific for initial period of organ development when the neural connections are still absent. And the other feedback is related to neural self-regulation and specific for later stages of the organ development, and includes an efferent vestibular feedback. Complexity of the problem is enhanced by incompleteness of experiments, and consequently the experimental results have not led to a clear interpretation despite the numerous studies.

Boyle, Richard D.↗
DOE OSTI2024

Role of Solvent in the Oriented Growth of Conductive Ni‐CAT‐1 Metal‐Organic Framework at Solid–Liquid Interfaces

Abstract A controlled growth of two‐dimensional (2D) π‐conjugated metal‐organic frameworks (MOFs) on solid substrates can open exciting opportunities for the application of 2D MOFs as optoelectronic devices. Some factors like solvent composition and type of substrates are known to influence the properties of solution‐processed 2D MOF crystals; however, a mechanistic understanding of how interactions between solvent, substrate, and precursors affect heterogeneous nucleation has been limited. Here, it is reported that the structure of Ni‐catecholate (Ni‐CAT‐1) MOFs at a solid–liquid interface is controlled by solvent–substrate and solvent–MOF precursor interactions. Specifically, the structure of the MOF film can be controlled by varying the affinity of the solvent to the substrate. As a fraction of N , N ‐dimethylformamide (DMF) in a binary solvent mixture of water and DMF increases, the arrangement of Ni‐CAT‐1 crystals varies from vertically aligned nanorods to the graphite substrate to less ordered nanorods with the lower initial nucleation number density of Ni‐CAT‐1 crystals on the surface.

2D materials↗
NASA NTRS1992

AVIRIS data and neural networks applied to an urban ecosystem

Urbanization is expanding on every continent. Although urban/industrial areas occupy a small percentage of the total landscape of the earth, their influence extends far beyond their borders, affecting terrestrial, aquatic, and atmospheric systems globally. Yet little has been done to characterize urban ecosystems of their linkages to other systems horizontally or vertically. With remote sensing we now have the tools to characterize, monitor, and model urban landscapes world-wide. However, the remote sensing performed on cities so far has concentrated on land-use patterns as distinct from land-cover or composition. The popular Anderson system is entirely land-use oriented in urban areas. This paper begins with the premise that characterizing the biophysical composition of urban environments is fundamental to understanding urban/industrial ecosystems, and, in turn, supports the modeling of other systems interfacing with urban systems. Further, it is contended that remote sensing is a tool poised to provide the biophysical composition data to characterize urban landscapes.

Ridd, Merrill K.↗
NASA NTRS1999

Context-Specific Adaptation of Gravity-Dependent Vestibular Reflex Responses

Stabilization of the eyes and head during body movements is important for maintaining balance and keeping the images of objects stationary on our retinas. Impairment of this ability can lead to disorientation and reduced performance in sensorimotor tasks such as piloting of spacecraft. In the absence of a normal earth gravity field, the dynamics of head stabilization, and the interpretation of vestibular signals that sense gravity and linear acceleration, are subject to change. Transitions between different gravitoinertial force environments - as during different phases of space flight - provide an extreme test of the adaptive mechanisms that maintain these reflexive abilities. It is vitally important to determine human adaptive capabilities in such a circumstance, so that we can know to what extent the sensorimotor skills acquired in one gravity environment will transfer to others. Our work lays the foundation for understanding these capabilities, and for determining how we can aid the processes of adaptation and readaptation. An integrated set of experiments addresses this issue. We use the general approach of adapting some type of reflexive eye movement (saccades, the angular vestibulo-ocular reflex (AVOR), the linear vestibulo-ocular reflex (LVOR)), or the vestibulo-collic reflex (VCR), to a particular change in gain or phase in one condition of gravitoiner-tial force, and adapting to a different gain or phase (or asking for no change) in a second gravitoinertial force condition, and then seeing if the gravitoinertial force itself - the context cue - can recall the previously learned adapted responses. The majority of the experiments in the laboratory use the direction of vertical gaze or the direction of gravity (head tilt) as the context cue. This allows us to study context-specificity in a ground-based setting. One set of experiments, to be performed in parabolic flight, specifically uses the magnitude of gravitoinertial force as a context cue. This is a much better analog of the situation encountered in space flight. Various experiments investigate the behavioral properties, neurophysiological basis, and anatomical substrate of context-specific learning mechanisms. We use otolith (gravity) signals as the contextual cue for switching between adapted states of the saccadic system, the angular and linear vestibulo-ocular reflexes, and the VCR. (By LVOR we mean the oculomotor response - horizontal, vertical, and torsional - to linear translation of the head and body.) We are studying the effect of context on adaptation of saccade gain, phase and gain of the AVOR and LVOR, on ocular counterrolling (OCR) in response to static head tilt, and on head/neck reflexes (VCR) in response to rotation in different orientations. Such research is particularly germane to potential problems of postural and oculomotor control upon exposure to different gravitational environments.

Shelhamer, Mark J.↗
DOE OSTI2023

Identification of Faults Susceptible to Induced Seismicity Final Report

The primary objective of this project (referred to as the State of Stress project or SoS project) was to predict the presence of faults susceptible to movement in the presence of fluid injection as a consequence of vertical pressure migration from the storage unit to the crystalline basement. These faults included those difficult to resolve with traditional interpretations of surface seismic: faults with no or minimal offset, faults in the crystalline basement where no seismic reflectors are present, subseismic faults (due to size), and faults undetected (e.g., due to unfavorable orientation with surface seismic survey).

25 ENERGY STORAGE↗
NASA NTRS1993

Six-Degree-Of-Freedom Magnetic Vibration Isolator

Feedback control provides soft mount and damping of vibrations. Active magnetic suspension system centers inner structure in position and orientation with respect to principal Cartesian coordinate axes of base or outer structure, stationary with respect to building or vehicle. System helps to isolate suspended mass from vibrations of building or vehicle. Designed to isolate 500-kg experimental apparatus from vibrations of spacecraft, but also used on Earth, provided that its z axis vertical and system assisted by low-stiffness vertical spring that, in steady state, holds up inner structure at nominal vertical position.

Gerver, Michael J.↗
DOE OSTI2023

Tailoring Growth Interfaces of Virtual Substrates for Power Electronics

Power electronics materials are poised to play a critical role in fulfilling next generation energy needs, with up to 90% of future energy demand predicted to flow through power electronics at some point.[1] Among a number of candidate materials, AlxGa1-xN is the strongest, having bipolar dopability, thermal and chemical stability, an ultra-wide bandgap, and demonstrated experimental feasibility. However, AlGaN growth is limited by a lack of lattice-matched substrates, ultimately stunting material quality at higher thicknesses needed for power electronics applications. Further, high power applications increasingly call for fully vertical device structures, necessitating a conductive substrate. [1] Recently our group identified the (111) plane of TaC as a conductive surface lattice-matched to Al0.55Ga0.45N, taking inspiration from prior work of AlN and GaN binaries on carbide and boride substrates. [2,3,4] In this talk we demonstrate the growth of (111)-oriented TaC by RF sputtering. We investigate the interface of TaC with sapphire and SiC substrates and identify means to suppress competing Ta2C nucleation in order to stabilize (111)-oriented TaC. Potential stacking sequences are identified with respect to crystal structure and observed twinning in the TaC films. We next assess structural changes and film recrystallization that results from face-to-face annealing of TaC thin films at high temperatures above 1500 degrees Celsius. Changes to grain structure and domain size are assessed by x-ray diffraction and surface morphology is explored using atomic force microscopy. Figure 1 shows significant improvements to in- and out-of-plane strain following annealing along with the formation of terraced step edges at the film surface. Strain as a function of material composition and thickness is considered, as this may play a major role in future nucleation of AlGaN layers.

CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND SU↗
DOE OSTI2025

CROCUS Dual Polarization Ceilometer Data at Northeastern Illinois University Rooftop

This dataset is from the Department of Energy Office of Science funded project, CROCUS Urban Integrated Field Laboratory (https://crocus-urban.org/). The dual-polarization ceilometer (Vaisala CL61) is an autonomous lidar system operating at 910 nm wavelength, providing valuable measurements for understanding atmospheric boundary layer evolution, air quality, and cloud-aerosol interactions. The CL61 measures the backscattered signal intensity alternating between parallel- and cross-polarization signals. The unique depolarization measurement capability improves discrimination between different particle types, such as liquid droplets, ice crystals, and aerosols. The depolarization is highly dependent on the scatterer shape and orientation (spherical vs non-spherical particles), with the linear depolarization ratio providing a measure of dominant backscatter signal component from atmospheric particles at various heights, essentially allowing discrimination between liquid and solid particles. With its efficient optical system, CL61’s improved signal-to-noise ratio compared to traditional ceilometers allows studying detailed vertical profiles of aerosols and clouds up to 15 km height.Datasets are stored in a netCDF data format, and we we encourage users to make use of the associated toolkits available from Unidata (https://www.unidata.ucar.edu/software/netcdf/), Project Pythia (https://foundations.projectpythia.org/core/data-formats/netcdf-cf.html), and our “Instrument Cookbooks” (https://crocus-urban.github.io/instrument-cookbooks) for more information on how to process the metadata-rich datasets.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1979

Convective instability when the temperature gradient and rotation vector are oblique to gravity. I - Fluids without diffusion

A linear stability analysis of fluid layers under uniform rotation (generally oblique to gravity) which possess both vertical and horizontal temperature gradients is made by considering ideal fluids without diffusion within a Boussinesq approximation. This simplified configuration is used to assess the preferred convective modes as a function of latitude on a planet like Jupiter. The tilted rotation vector introduces a preference for roll-like disturbances with north-south orientations, while the horizontal temperature gradient produces a thermal wind shear which favors convective rolls oriented parallel to the flow in an east-west direction. It is found that the horizontal temperature gradient needed to produce a preference for the axisymmetric or east-west rolls increases with an increasing rotation rate and a decreasing latitude. The parameter values for Jupiter are estimated with the use of a simple radiative convective model, indicating a preference for axisymmetric rolls at nearly all latitudes if the convection zone depth is greater than about 200 km below the one atmosphere pressure level and convective roll characteristics which contribute to an equatorial acceleration.

Hathaway, D. H.↗
NASA NTRS1985

Hover test results of a small-scale twin-tilt nacelle model

Characteristics in hover of an 11/36%-scale, powered, twin-tilt nacelle model were measured in the NASA Ames Research Center's 40- by 80-Foot Wind Tunnel. The model was powered by two high-pressure air-driven turbofan propulsion simulators. The position of the sting-mounted model was fixed and a movable ground plane was used to vary ground height and orientation. Hover characteristics were investigated in and out of ground effect for roll angles of -2 deg to +14 deg and pitch angles of -15 deg to +10 deg. Results for the basic configurations are compared with data from hover tests of the full-scale tilt nacelle model. Two methods were investigated to increase vertical vane effectiveness: (1) extending the maximum vane deflection from 20 deg to 70 deg, and (2) adding a third vertical vane. The goal was to increase the roll-control capability to significantly reduce or balance the strong, unfavorable rolling moment created by the loss of one engine. Results indicate that the three-vertical-vane configuration is more effective than two vertical vanes and that extended vane deflections significantly reduce the engine-out roll in hover.

Schmidt, S. B.↗
NASA NTRS1985

Vapor Growth of Alloy-Type Semiconductor Crystals

The present effort is part of a continuing research program directed towards the investigation of basic vapor transport phenomena and of crystal growth properties of electronic materials. The primary purpose of ground-based studies is the development and definition of optimum experimental parameters for flight experiments. The ground-based effort includes the investigation of gravity-driven convection effects on mass transport rates and on crystal morphology for different orientations of the density gradient with respect to the gravity vector, and as a function of pressure and of temperature. In addition to the experimental tasks, theoretical efforts involve the quantitative thermodynamic analysis of the systems under investigation, the computation of fluid dynamic parameters, and the consideration of other possible effects on fluid flow under vertical, stabilizing and microgravity conditions. The specific experiments to be performed in a microgravity environment include the investigation of vapor transport and crystal growth phenomena of the GeSe-Xenon system and of the mass flux and growth of bulk and layer-type crystals of Hg sub (1-x) Cd sub x Te using HgI as a transport agent.

Wiedemeier, H.↗
DOE OSTI2020

Boundary-directed epitaxy of block copolymers

Directed self-assembly of block copolymers (BCPs) enables nanofabrication at sub-10 nm dimensions, beyond the resolution of conventional lithography. However, directing the position, orientation, and long-range lateral order of BCP domains to produce technologicallyuseful patterns is a challenge. Here, we present a promising approach to direct assembly using spatial boundaries between planar, low-resolution regions on a surface with different composition. Pairs of boundaries are formed at the edges of isolated stripes on a background substrate. Vertical lamellae nucleate at and are pinned by chemical contrast at each stripe/ substrate boundary, align parallel to boundaries, selectively propagate from boundaries into stripe interiors (whereas horizontal lamellae form on the background), and register to wide stripes to multiply the feature density. Ordered BCP line arrays with half-pitch of 6.4 nm are demonstrated on stripes >80 nm wide. Boundary-directed epitaxy provides an attractive path towards assembling, creating, and lithographically defining materials on sub-10 nm scales.

36 MATERIALS SCIENCE↗