Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variability analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Snow mapping and land use studies in Switzerland

The author has identified the following significant results. A system was developed for operational snow and land use mapping, based on a supervised classification method using various classification algorithms and representation of the results in maplike form on color film with a photomation system. Land use mapping, under European conditions, was achieved with a stepwise linear discriminant analysis by using additional ratio variables. On fall images, signatures of built-up areas were often not separable from wetlands. Two different methods were tested to correlate the size of settlements and the population with an accuracy for the densely populated Swiss Plateau between +2 or -12%.

Haefner, H.↗

Upper limits on the cyclotron lines from Her X-1 as observed with OSO-8

Observations of Her X-1 were obtained during its ON-state in September, 1977, with the high-energy X-ray detector on board OSO-8. Upper limits on the line fluxes at 60 and 135 keV based on these observations are above, and hence consistent with, the positive results reported by Trumper, et al from a balloon flight during the same time interval. A detailed analysis of the time-variable et al background spectrum suggests that the line emission, especially in the time-averaged spectrum of Her X-1 previously reported by other workers at 25, 60, and 135 keV, is due to instrumental effects. The spectrum obtained with OSO-8 in September, 1977, is considerably steeper than that observed in pre-1976 balloon flights. These results are consistent with the results obtained by Trumper showing a decrease in the effective temperature of Her X-1 between May, 1976, and September, 1977.

Dennis, B. R.↗

Five-city economics of a solar hot-water-system

Report projects energy savings and system costs for five sites using analysis of actual solar energy installation performance in Togus, Maine. Maine system supplies 75 percent of hot water needed for single-family residence; economic payback period is 19 years. Benefits for all sites depend on maintenance or decrease of initial investment required and continuing increase in cost of conventional energy. Report includes analysis weighing potential changes in variables used to evaluate system profitability.

Source record↗

NWSC nickel cadmium spacecraft cell accelerated life test program data analysis

An analysis of the data leading to a proposed accelerated life test scheme to test a nickel cadmium cell under spacecraft usage conditions is described. The amount and concentration of electrolyte and the amount of precharge in the cell are discussed in relation to the design of the cell and the accelerated test design. A failure analysis of the cell is summarized. The analysis included such environmental test variables as the depth of discharge, the temperature, the amount of recharge and the charge and discharge rate.

Lander, J.↗

Atmospheric analysis modeling in support of Seasat

Atmospheric objective analysis models were developed and tested in preparation for assessing the utility of Seasat data. Of the several discretionary procedures in such computer programs, the effects of three were examined and documented: (1) the effect of varying the weights in the pattern conserving techniques; (2) the effect of varying the data influence region; (3) the effect of including wind information in analysis of mass-structure variables. The problem of inserting bogus reports is also examined.

Langland, R. A.↗

A Preliminary Study of Solar Powered Aircraft and Associated Power Trains

The feasibility of regeneratively powered solar high altitude powered platform (HAPP) remotely piloted vehicles was assessed. Those technologies which must be pursued to make long duration solar HAPPs feasible are recommended. A methodology which involved characterization and parametric analysis of roughly two dozen variables to determine vehicles capable of fulfilling the primary mission are defined. One of these vehicles was then conceptually designed. Variations of each major design parameter were investigated along with state-of-the-art changes in power train component capabilities. The midlatitude mission studied would be attainable by a solar HAPP if fuel cell, electrolyzer and photovoltaic technologies are pursued. Vehicles will be very large and have very lightweight structures in order to attain the combinations of altitude and duration required by the primary mission.

Hall, D. W.↗

Antarctic sea ice microwave signatures and their correlation with in situ ice observations

The general characteristics and microwave radiative properties of sea ice in the Weddell Sea region during the onset of spring are studied by using the Nimbus 7 Scanning Multichannel Microwave Radiometer (SMMR) and other satellite sensors, in conjunction with in situ observations from the Mikhail Somov. The position of the ice edge, the gradient of ice concentration, and the width of the Marginal Ice Zone are inferred from the microwave data, and are found to be consistent with ship observations, especially at 18 GHz. The sensitivities of the various SMMR frequencies to surface and other effects are investigated by using multispectral cluster analysis. The results show considerable variability in emissivity, especially at 37 GHz, likely associated with varying degrees of surface wetness. Ice concentrations are derived by using two methods: one that assumes fixed emissivities for consolidated ice and an iterative procedure that accounts for the variable emissivities observed. Using the procedure that allows the emissivities to be variable gives ice concentrations that are more consistent with qualitative field observations.

Comiso, J. C.↗

Electrophoretic mobility of cells in a vertical Ficoll gradiant

The upward migration of living cells and test particles under the influence of a constant electric field in a low conductivity Ficoll gradient occurs at nearly constant velocity. Viscosity and neutral polymer concentration affect migration rate. Decreasing viscosity speeds up the particle migration, decreasing neutral polymer (Ficoll) concentration, slows particle migration, since electrophoretic mobility increases approximately linearly with neutral polymer concentration. Neutral polymers interact with the cell surface to effectively raise its zeta potential. An analytic function was developed from the known dependence of these physical variables on migration distance; the analysis expresses migration velocity as an explicit function of position in the density gradient. It predicts an almost linear increase in velocity of about 12 to 16% over the working region of the gradient. It was numerically integrated and correctly predicts cell migration distance vs time curves without the use of any fitted parameters. The resulting migration curves follow the expected slowly varying exponential form that closely resembles a straight line. The ability to determine standard electrophoretic mobilities from such curves depends on knowledge of the effect of Ficoll on the zeta potential of the cell type that is separated.

Plank, L. D.↗

Drag characteristics of unsteady, perturbed boundary layer flows

A series of time-dependent numerical computations have been performed for the flow of an unsteady boundary layer over an embedded cavity, which is aligned normal to the flow direction. The unsteady flow is the result of the imposition of a Stuart vortex, at the inflow boundary of the computational domain, onto an otherwise unperturbed two-dimensional laminar boundary layer flow. This produces a strongly vortical, but spatially monochromatic, motion at inflow which is allowed to evolve downstream through the time-dependent numerical solution of appropriate conservation equations. As the imposed vortex evolves over the solid boundary, a weaker induced vortical motion is produced and together these perturbing motions interact with the fluid motion in the embedded cavity. An analysis of the pertinent dynamic variables as well as the time-dependent drag characteristics for this type of non-planar geometry is performed; with particular emphasis on the relative contribution of both pressure drag and frictional drag at various times in the evolution process.

Gatski, T. B.↗

Large-scale circulation departures related to wet episodes in northeast Brazil

Large scale circulation features are presented as related to wet spells over northeast Brazil (Nordeste) during the rainy season (March and April) of 1979. The rainy season season is devided into dry and wet periods, the FGGE and geostationary satellite data was averaged and mean and departure fields of basic variables and cloudiness were studied. Analysis of seasonal mean circulation features show: lowest sea level easterlies beneath upper level westerlies; weak meridional winds; high relative humidity over the Amazon basin and relatively dry conditions over the South Atlantic Ocean. A fluctuation was found in the large scale circulation features on time scales of a few weeks or so over Nordeste and the South Atlantic sector. Even the subtropical High SLP's have large departures during wet episodes, implying a short period oscillation in the Southern Hemisphere Hadley circulation.

Sikdar, D. N.↗

Measurement and Modeling of the Optical Scattering Properties of Crop Canopies

The specular reflection process is shown to be a key aspect of radiation transfer by plant canopies. Polarization measurements are demonstrated as the tool for determining the specular and diffuse portions of the canopy radiance. The magnitude of the specular fraction of the reflectance is significant compared to the magnitude of the diffuse fraction. Therefore, it is necessary to consider specularly reflected light in developing and evaluating light-canopy interaction models for wheat canopies. Models which assume leaves are diffuse reflectors correctly predict only the diffuse fraction of the canopy reflectance factor. The specular reflectance model, when coupled with a diffuse leaf model, would predict both the specular and diffuse portions of the reflectance factor. The specular model predicts and the data analysis confirms that the single variable, angle of incidence of specularly reflected sunlight on the leaf, explains much of variation in the polarization data as a function of view-illumination directions.

Vanderbilt, V. C.↗

Optimization of a heat-pipe-cooled space radiator for use with a reactor-powered Stirling engine

The design optimization of a reactor-Stirling heat-pipe-cooled radiator is presented. The radiator is a self-deploying concept that uses individual finned heat pipe 'petals' to reject waste heat from a Stirling engine. Radiator optimization methodology is presented, and the results of a parametric analysis of the radiator design variables for a 100-kW(e) system are given. The additional steps of optiminzing the radiator resulted in a net system mass savings of 3 percent.

Moriarty, Michael P.↗

Modeling the interactions between the ocean and the environment for microwave radar sensing

An extensive set of X-band microwave backscatter measurements has been analyzed to determine its dependence on winds near the surface, atmospheric stability, and long-wave slopes. These radar measurements, made from a tower in the Gulf of Mexico, were performed in conjunction with an extensive set of simultaneous environmental measurements. The CW microwave system operated at an incidence angle of 45 deg, with antennas directed into winds and waves. Model functions for the radar cross section (RCS) and the modulation transfer function (MTF) are developed that depend on the geophysical variables, including wind stress. Statistical analysis shows that these models functions yield a significant smaller error when fit to the RCS data than a simple wind-speed function displays. A Taylor-series expansion of the returned power from a small area provides a unified function that demonstrates the complementary roles of wave slope and atmospheric fluctuations on both the RCS, the MTF, and the coherence. The issue of linearity of the MTF is addressed with this data set, yielding evidence that this is a valid assumption. These results have direct application to the remote sensing of the mean and fluctuating winds, and the wave spectrum with coherent and incoherent active radars.

Weissman, David E.↗

Large-scale circulation departures related to wet episodes in north-east Brazil

Large scale circulation features are presented as related to wet spells over northeast Brazil (Nordeste) during the rainy season (March and April) of 1979. The rainy season is divided into dry and wet periods; the FGGE and geostationary satellite data was averaged; and mean and departure fields of basic variables and cloudiness were studied. Analysis of seasonal mean circulation features show: lowest sea level easterlies beneath upper level westerlies; weak meridional winds; high relative humidity over the Amazon basin and relatively dry conditions over the South Atlantic Ocean. A fluctuation was found in the large scale circulation features on time scales of a few weeks or so over Nordeste and the South Atlantic sector. Even the subtropical High SLPs have large departures during wet episodes, implying a short period oscillation in the Southern Hemisphere Hadley circulation.

Sikdar, Dhirendra N.↗

The relationship between IR, optical, and UV extinction

An analysis is presented for the variability of absolute IR, optical, and UV extinction, A(sub lambda), derived through the ratio of total-to-selective extinction, R, for 31 lines of sight for which reliable UV extinction parameters were derived. These data sample a wide range of environments and are characterized by 2.5 is less than or equal to R is less than or equal to 6.0. It was found that there is a strong linear dependence between extinction expressed as A(sub lambda)/A(sub V) and 1/R for 1.25 micron is less than or equal to lambda is less than or equal to 0.12 micron. Differences in the general shape of extinction curves are largely due to variations in shape of optical/near-UV extinction corresponding to changes in R, with A(sub lambda)/A(sub V) decreasing for increasing R. From a least-squares fit of the observed R-dependence as a function of wavelength for 0.8/micron is less than or greater than 1/lambda is less than or equal to 8.3/micron, an analytic expression was generated from which IR, optical, and UV extinction curves of the form A(sub lambda)/A(sub V) can be reproduced with reasonable accuracy from a knowledge of R. It was also found that the absolute bump strength normalized to A(sub V) shows a general decrease with increasing R, suggesting that some fraction of bump grains may be selectively incorporated into coagulated grains. Finally, it was found that absolute extinction normalized by suitably chosen color indices results in a minimization of the R-dependence of portions of the UV curve, allowing A(sub lambda) to be estimated for these wavelengths independent of R.

Cardelli, Jason A.↗

Sensitivity analysis and optimization issues in NASTRAN

The purpose is to develop procedures to extract sensitivity analysis information from COSMIC/NASTRAN and to couple it with a mathematical optimization package. At present, the analysis will be limited to stress, displacement, and frequency constraints with structures modeled with membrane elements, rods, and bar elements. Two types of sensitivity analysis are discussed: an adjoint variable approach which is most effective when the number of active constraints is significantly less than the number of physical variables, and an approach based on a first order approximation of a Taylor series. The latter approach is more effective when the number of independent design variables is significantly less than the number of active constraints.

Tischler, V. A.↗

Design of a blade-stiffened composite panel with a hole

A procedure is developed analytically to design and produce an optimized stiffened panel with a centrally located hole. The PASCO panel-buckling analysis and sizing code is employed with the Engineering Analysis Language (EAL) code for finite-element analysis to optimize the design variables. Important design considerations are stiffener height and ply thicknesses in the skin and the stiffener laminates. The EAL code calculates the maximum strains around the hole boundary, and the resulting constraints are combined with the buckling constraint developed by the PASCO code. Cooptimization of the two codes is effected until convergence on the optimal solution is achieved. Results of the analytical procedure are experimentally verified by applying a compressive end-load to graphite-fiber laminated plates with center holes. The experimental results support the analytical procedure, and it is found that for the same weight, the soft-skin designs tested are found to have the best tolerance characteristics and resistance to failure.

Nagendra, S.↗