Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “total correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Helium Release During Fracture and Granular Fragmentation of Rocks

Geogenic Helium-4 ( 4 He) in-situ increases locally in regions of large deformation generated naturally or anthropogenically. This gas release by deformation is a potential geochemical precursor signal for subsurface deformation. To evaluate the applicability of 4 He degassing for correlating deformation in different lithologies, we conducted high force crush tests, up to 97,800 N axial load, to assess the total 4 He released during fragmentation of the rocks. We observed that the highest 4 He released occurred in the sedimentary rocks and that release correlated strongly with lithologic age and U/Th content. Microstructural changes of the pre- and post-test rocks indicate that the degree of grain size reduction relates directly to the total 4 He released during crushing. The range of in-place 4 He was calculated based XRF measurements of uranium and thorium in each lithology, with the results indicating that the majority of the trapped 4 He was not released. However, the 4 He released by deformation depended upon how the each rock deformed during deformation and the degree of grain size reduction. We postulate that 4 He precursor signals can be used to understand subsurface deformation only if geomechanical and geochemical conditions for 4 He enrichment in a lithology are met.

Deformation signals↗

Polarized View of Supercooled Liquid Water Clouds

Supercooled liquid water (SLW) clouds, where liquid droplets exist at temperatures below 0 C present a well known aviation hazard through aircraft icing, in which SLW accretes on the airframe. SLW clouds are common over the Southern Ocean, and climate-induced changes in their occurrence is thought to constitute a strong cloud feedback on global climate. The two recent NASA field campaigns POlarimeter Definition EXperiment (PODEX, based in Palmdale, California, January-February 2013) and Studies of Emissions and Atmospheric Composition, Clouds and Climate Coupling by Regional Surveys (SEAC4RS, based in Houston, Texas in August- September 2013) provided a unique opportunity to observe SLW clouds from the high-altitude airborne platform of NASA's ER-2 aircraft. We present an analysis of measurements made by the Research Scanning Polarimeter (RSP) during these experiments accompanied by correlative retrievals from other sensors. The RSP measures both polarized and total reflectance in 9 spectral channels with wavelengths ranging from 410 to 2250 nm. It is a scanning sensor taking samples at 0.8deg intervals within 60deg from nadir in both forward and backward directions. This unique angular resolution allows for characterization of liquid water droplet size using the rainbow structure observed in the polarized reflectances in the scattering angle range between 135deg and 165deg. Simple parametric fitting algorithms applied to the polarized reflectance provide retrievals of the droplet effective radius and variance assuming a prescribed size distribution shape (gamma distribution). In addition to this, we use a non-parametric method, Rainbow Fourier Transform (RFT),which allows retrieval of the droplet size distribution without assuming a size distribution shape. We present an overview of the RSP campaign datasets available from the NASA GISS website, as well as two detailed examples of the retrievals. In these case studies we focus on cloud fields with spatial features varying between glaciated and liquid phases at altitudes as high as 10 km, which correspond to temperatures close to the homogeneous freezing temperature of pure water drops (about -35 C or colder). The multimodal droplet size distributions retrieved from RSP data in these cases are consistent with the multi-layer cloud structure observed by correlative Cloud Physics Lidar (CPL) measurements.

Clouds↗

Fast correlation heating in moderately coupled electron–ion plasmas

If the electrons in a plasma are suddenly heated, the resulting change in Debye shielding causes the ion kinetic energy to quickly increase. For the first time, this correlation heating , which is much faster than collisional energy exchange, is rigorously derived for a moderately coupled, electron–ion plasma. The electron–ion mass ratio is taken to be the smallest parameter in the Bogoliubov–Born–Green–Kirkwood–Yvon hierarchy, smaller even than the reciprocal of the plasma parameter. This ordering differs from conventional kinetic theory by making the electron collision rates faster than the ion plasma frequency, which allows stronger coupling and makes the ion heating a function only of the total energy supplied to the electrons. The calculation uses known formulae for correlations in a two-temperature plasma, for which a new, elementary derivation is presented. Suprathermal ions may be created more rapidly by this mechanism than by ion–electron Coulomb collisions. This means that the use of a femtosecond laser pulse could potentially help to achieve ignition in certain fast ignition approaches to inertial confinement fusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reliability, biological variability, and accuracy of multi-frequency bioelectrical impedance analysis for measuring body composition components

Introduction Bioelectrical impedance analysis (BIA) systems are gaining popularity for use in research and fitness assessments as the technology improves and becomes more affordable and easier to use. Multifrequency BIA (MF-BIA) may improve accuracy and precision using octopolar contacts for segmental analyses. Purpose Evaluate reliability, biological variability, and accuracy of component measures (total body water, mass, and composition) of commercially available MF-BIA system (InBody 770, Cerritos, California, USA). Methods Fourteen healthy military-age adults were assessed by MF-BIA in duplicate on five laboratory visits across 3 weeks (10 measures each). Participants were evaluated at the same time of day after refraining from strenuous exercise (> 48 h), alcohol consumption (> 24 h), and caffeine, nicotine, and food (> 10 h). Systematic error (test–retest reliability) and biological variability (day-to-day reliability) were summarized by intraclass correlation coefficient (ICC) values determined for body mass (fat, fat-free, total) and body water (extracellular, intracellular, total). Body composition measurements derived from BIA on the second visit were also tested for accuracy compared to dual-energy x-ray absorptiometry (DXA). Results Test–retest reliability was very high for all measurements of whole-body water and mass (ICC ≥ 0.999) and high for regional body water and mass (ICC 0.973–1.000). Biological variability was observable with very minor differences between tests (same day) for total and regional body water (0.0–0.2 L) and total and regional body mass measurements (0.0–0.2 kg); while between day differences were slightly higher (0.0–0.5 L and 0.1–0.7 kg). Compared to DXA, the MF-BIA whole-body measures showed an offset in %BF (Bias −4.0 ± 2.8%; Standard error of the estimate (SEE), 2.6%), an overprediction for total body fat-free mass (Bias 2.8 ± 2.1 kg; SEE 2.2 kg) and an underprediction of total body fat mass (Bias −2.9 ± 2.0 kg; SEE 1.9 kg). Conclusion Under controlled conditions with fit and healthy men and women, this MF-BIA system has high methodological reliability and demonstrates stable day-to-day measurements of major body composition components. Previously reported ~3% body fat offset compared to criterion methods was again confirmed. Precision of the InBody 770 shows consistency and supports further testing of this specific device as a new military standards method and suitability across a wider range of %BF.

Nutrition & Dietetics↗

Overview of crew member energy expenditure during Shuttle Flight 61-8 EASE/ACCESS task performance

The energy expenditure of the Shuttle Flight 61-B crewmembers during the extravehicular performance of Experimental Assembly of Structures in EVA (EASE) and Assembly Concept of Construction of Space Structures (ACCESS) construction system tasks are reported. These data consist of metabolic rate time profiles correlated with specific EASE and ACCESS tasks and crew comments. Average extravehicular activity metabolic rates are computed and compared with those reported from previous Apollo, Shylab, and Shuttle flights. These data reflect total energy expenditure and not that of individual muscle groups such as hand and forearm. When correlated with specific EVA tasks and subtasks, the metabolic profile data is expected to be useful in planning future EVA protocols. For example, after experiencing high work rates and apparent overheating during some Gemini EVAs, it was found useful to carefully monitor work rates in subsequent flights to assess the adequacy of cooling garments and as an aid to preplanning EVA procedures. This presentation is represented by graphs and charts.

Horrigan, D. J.↗

tih_vqe [SWR-23-32]

This software supports the paper, "Exploring the scaling limitations of the variational quantum eigensolver with the bond dissociation of hydride diatomic molecules," published in the International Journal of Quantum Chemistry, whose abstract is as follows: Materials simulations involving strongly correlated electrons pose fundamental challenges to state-of-the-art electronic structure methods but are hypothesized to be the ideal use case for quantum computing. To date, no quantum computer has simulated a molecule of a size and complexity relevant to real-world applications, despite the fact that the variational quantum eigensolver (VQE) algorithm can predict chemically accurate total energies. Nevertheless, because of the many applications of moderately-sized, strongly correlated systems, such as molecular catalysts, the successful use of the VQE stands as an important waypoint in the advancement toward useful chemical modeling on near-term quantum processors. In this paper, we take a significant step in this direction. We lay out the steps, write, and run parallel code for an (emulated) quantum computer to compute the bond dissociation curves of the TiH, LiH, NaH, and KH diatomic hydride molecules using VQE. TiH was chosen as a relatively simple chemical system that incorporates d orbitals and strong electron correlation. Because current VQE implementations on existing quantum hardware are limited by qubit error rates, the number of qubits available, and the allowable gate depth, recent studies have focused on chemical systems involving s and p block elements. Through VQE + UCCSD calculations of TiH, we evaluate the near-term feasibility of modeling a molecule with d-orbitals on real quantum hardware. We demonstrate that the inclusion of d-orbitals and the use of the UCCSD ansatz, which are both necessary to capture the correct TiH physics, dramatically increase the cost of this problem. We estimate the approximate error rates necessary to model TiH on current quantum computing hardware using VQE+UCCSD and show them to likely be prohibitive until significant improvements in hardware and error correction algorithms are available.

Graf, Peter↗

Negative Ion Formation in Complex Heavy Systems

The project’s primary objective is to gain a fundamental theoretical understanding of the near-threshold electron attachment mechanism in low energy electron elastic scattering from complex heavy systems through the calculation of integral and differential cross sections and extract reliable electron affinities (EAs). The complex angular momentum (CAM), also known as Regge-pole methodology wherein is fully embedded the crucial electron-electron correlations and the core polarization interaction, is used for the investigations. Regge trajectories allow us to probe electron attachment at the fundamental level near threshold, thereby uncovering new manifestations, including the mechanism of nanocatalysis, and determine reliable EAs. Low-energy electron elastic scattering total cross sections (TCSs) for the lanthanide and actinide atoms and the fullerene molecules are calculated. From the TCSs ground, metastable and excited states anionic binding energies (BEs) are extracted and compared with the available measured and/or calculated EAs. Significantly, our calculated ground state anionic BEs correspond to the theoretically challenging to calculate EAs and they are used to assess the reliability of existing EAs. Doubly charged negative ions of atoms and molecules are proposed as novel tunable catalysts and demonstrated in the oxidation of water into peroxide. Negatively charged fullerene molecules are used to catalyze water oxidation to peroxide and water synthesis from H 2 and O 2 as well. Violation of time-reversal and particle-hole symmetries in strongly correlated Fermi systems are reviewed with the collaboration involving the International Laboratory of Fermi Condensation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Northwest Airlines flight experiments

An experiment was conducted in which real-time Total Ozone Mapping Spectrometer (TOMS) data was compared with Northwest Airlines upper air charts. It was demonstrated that the regions of steep gradient in total ozone corresponded with fronts in the upper troposphere, specifically breaks in the tropopause associated with jet streams. Other small scale structures in the ozone could be related to minor trough and ridge lines. This suggests that the relation between total ozone and tropopause height might apply even on relatively small scales, and an analysis produced high correlation coefficients provided that the air mass origin was considered. In a second test, cabin ozone mixing at 37,000 ft. varied from less than 100 ppb (300 DU total ozone) to greater than 300 ppb in a trough (400 DU total ozone). A third analysis showed that clear air turbulence was located where upper air fronts were in rapid motion as suggested by comparison of the 1200 UT synoptic charts and the ozone map taken about six hours later.

Krueger, Arlin J.↗

Energy budget measurements using eddy correlation and Bowen ratio techniques at the Kinosheo Lake tower site during the Northern Wetlands Study

Fluxes of heat and water vapor were measured on a 20-m tower at Kinosheo Lake in the Hudson Bay lowlands using eddy correlation and Bowen ratio energy balance techniques. The study period was June 25 to July 28, 1990. Measurements were made over a peat bog consisting of a mixture of sphagnum moss and lichen hummocks and black pools. About 200 m west of the tower were several shallow ponds. The hummocks had a dry, insulating surface and were underlain by an ice layer near 50 cm depth until mid-July. At the beginning of the period the black pools were covered with water, and although the free water gradually disappeared over the study period, they remained saturated to the end of July. The depth of peat near the tower was about 3 m. Despite the ice layer under the hummocks, their daytime surface temperatures were high, near 35 C, and after the middle of July, above 40 C. Inspection of temperature, precipitation, and radiation data showed that the midsummer period of 1990 was warmer, drier, and sunnier than usual at Moosonee and so by influence at Lake Kinosheo. When all the data were combined to yield average diurnal energy balance components, the eddy correlation fluxes accounted for 90% of the available energy. Latent heat flux averaged 46% of the total available energy and the sensible heat flux averaged 34%. Daytime Bowen ratios were near 1 for the experimental period, suggesting that the bog behaved more like a dryland than a wetland. Eddy correlation measurements of sensible heat and latent heat flux were less than those measured using the Bowen ratio energy balance technique, the average ratios being 0.81 and 0.86 respectively. These differences were possibly due to the difficulty in measuring energy balance components of net radiation and ground heat flux over the mosaic surface.

Den Hartog, G.↗

Local spin structure in the layered van der Waals materials MnPS 𝑥 ⁢Se 3−𝑥

Two-dimensional (2D) layered materials, whether in bulk form or reduced to just a single layer, have potential applications in spintronics and capacity for advanced quantum phenomena. A prerequisite for harnessing these opportunities lies in gaining a comprehensive understanding of the spin behavior in 2D materials. The low dimensionality motivates an understanding of the spin correlations over a wide length scale, from local to long-range order. In this context, we focus on the magnetism in bulk MnPSe 3 and MnPS 3 , 2D layered van der Waals antiferromagnetic semiconductors. These materials have similar honeycomb Mn layers and magnetic ordering temperatures, but distinct spin orientations and exchange interactions. Here, we utilize neutron scattering to gain deeper insights into the local magnetic structures and spin correlations in the paramagnetic and ordered phases by systematically investigating a MnPS 𝑥 ⁢Se 3−𝑥 (𝑥 = 0, 1, 1.5, 2, 3) series of powder samples using total neutron scattering measurements. By employing magnetic pair distribution function analysis, we unraveled the short-range magnetic correlations in these materials and explored how the nonmagnetic anion S/Se mixing impacts the magnetic correlations. The results reveal that the magnetism can be gradually tuned through alteration of the nonmagnetic S/Se content, which tunes the atomic structure. The change in magnetic structure is also accompanied by a control of the magnetic correlation length within the 2D honeycomb layers. Complimentary inelastic neutron scattering measurements allowed a quantification of the change in the magnetic exchange interactions for the series and further highlighted the gradual evolution of spin interactions in the series MnPS 𝑥 ⁢Se 3−𝑥 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultraviolet extinction and diffuse band strength correlations

Correlations between UV extinction parameters and diffuse band strengths are south, using a data base of 50 stars with recently measured extinction curves. A novel aspect of this study is that the basic dependence of most interstellar parameters on E(B-V) (or, nearly equivalently, on the total hydrogen column density) has been largely canceled out. After this cancellation, a weak correlation is found between the 4430 A diffuse band and the 2175 A extinction feature. No other correlations are found. These results support a molecular origin for the 5780 A and 6284 A bands. It is speculated that the correlation pattern found for the 4430 A band can be explained if this band originates in reactions on disordered grain surfaces.

Seab, C. G.↗

Using imaging spectroscopy to detect variation in terrestrial ecosystem productivity across a water-stressed landscape

A central challenge to understanding how climate anomalies, such as drought and heatwaves, impact the terrestrial carbon cycle, is quantification and scaling of spatial and temporal variation in ecosystem gross primary productivity (GPP). Existing empirical and model-based satellite broadband spectra-based products have been shown to miss critical variation in GPP. We evaluate the potential of high spectral resolution (10 nm) shortwave (400–2,500 nm) imagery to better detect spatial and temporal variations in GPP across a range of ecosystems, including forests, grassland-savannas, wetlands, and shrublands in a water-stressed region. Estimates of GPP from eddy covariance observations were compared against airborne hyperspectral imagery, collected across California during the 2013–2014 HyspIRI airborne preparatory campaign. Observations from 19 flux towers across 23 flight campaigns (102 total image-flux tower pairs) showed GPP to be strongly correlated to a suite of spectral wavelengths and band ratios associated with foliar physiology and chemistry. A partial least squares regression (PLSR) modeling approach was then used to predict GPP with higher validation accuracy (adjusted R 2 = 0.71) and low bias (0.04) compared to existing broadband approaches (e.g., adjusted R 2 = 0.68 and bias = -5.71 with the Sims et al. model). Significant wavelengths contributing to the PLSR include those previously shown to coincide with Rubisco (wavelengths 1,680, 1,740, and 2,290 nm) and V cmax (wavelengths 1,680, 1,722, 1,732, 1,760, and 2,300 nm). These results provide strong evidence that advances in satellite spectral resolution offer significant promise for improved satellite-based monitoring of GPP variability across a diverse range of terrestrial ecosystems.

47 OTHER INSTRUMENTATION↗

The Effects of an Applied Transverse Field in a Graphene-Like Ising Bilayer Film with Nonequivalent Planes

Using the effective field theory with correlations, we have studied the phase diagrams and the thermal variations of total magnetization (m{sub T}) in a graphene-like Ising bilayer film with nonequivalent planes, consisting of two A (spin-1/2) and B (spin-1) planes with an applied transverse field in the B plane. We have investigated the effects of an applied transverse field and the interplane exchange interaction on the magnetic properties. Many interesting behaviors, such as various types of m{sub T} curves and the re-entrant phenomena, have been obtained, depending on the selections of physical parameters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigating drivers of microbial activity and respiration in a forested bog

Northern peatlands store nearly one-third of terrestrial carbon (C) stocks while covering only 3% of the global landmass; nevertheless, the drivers of C cycling in these often-waterlogged ecosystems are different from those that control C dynamics in upland forested soils. To explore how multiple abiotic and biotic characteristics of bogs interact to shape microbial activity in a northern, forested bog, we added a labile C tracer ( 13 C-labeled starch) to in situ peat mesocosms and correlated heterotrophic respiration with natural variation in several microbial predictor variables, such as enzyme activity and microbial biomass, as well as with a suite of abiotic variables and proximity to vascular plants aboveground. We found that peat moisture content was positively correlated with respiration and microbial activity, even when moisture levels exceeded total saturation, suggesting that access to organic matter substrates in drier environments may be limiting for microbial activity. Proximity to black spruce trees decreased total and labile heterotrophic respiration. This negative relationship may reflect the influence of tree evapotranspiration and peat shading effects; i.e., microbial activity may decline as peat dries and cools near trees. Here, we isolated the response of heterotrophic respiration to explore the variation in, and interactions among, multiple abiotic and biotic drivers that influence microbial activity. This approach allowed us to reveal the relative influence of individual drivers on C respiration in these globally important C sinks.

59 BASIC BIOLOGICAL SCIENCES↗

Adsorption Mechanisms of Glyphosate on Ferrihydrite: Effects of Al Substitution and Aggregation State

Ferrihydrite is one of the most reactive iron (Fe) (oxyhydr)oxides in soils, but the adsorption mechanisms of glyphosate, the most widely used herbicide, on ferrihydrite remain unknown. Here, we determined the adsorption mechanisms of glyphosate on pristine and Al-substituted ferrihydrites with aggregated and dispersed states using macroscopic adsorption experiments, zeta potential, phosphorus K-edge X-ray absorption near-edge structure spectroscopy, in situ attenuated total reflectance Fourier transform infrared spectroscopy coupled with two-dimensional correlation spectroscopy, and multivariate curve resolution analyses. Aggregation of ferrihydrite decreases the glyphosate adsorption capacity. The partial substitution of Al in ferrihydrite inhibits glyphosate adsorption on aggregated ferrihydrite due to the decrease of external specific surface area, while it promotes glyphosate adsorption on dispersed ferrihydrite, which is ascribed to the increase of surface positive charge. Glyphosate predominately forms protonated and deprotonated, depending on the sorption pH, monodentate-mononuclear complexes (MMH 1 /MMH 0 , 77-90%) on ferrihydrites, besides minor deprotonated bidentate-binuclear complexes (BBH 0 , 23-10%). Both Al incorporation and a low pH favor the formation of the BB complex. The adsorbed glyphosate preferentially forms the MM complex on ferrihydrite and preferentially bonds with the Al-OH sites on Al-substituted ferrihydrite. In conclusion, these new insights are expected to be useful in predicting the environmental fate of glyphosate in ferrihydrite-rich environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Integrated Two-Stage Alkaline-Oxidative Pretreatment of Hybrid Poplar. Part 1: Impact of Alkaline Pre-Extraction Conditions on Process Performance and Lignin Properties

We previously demonstrated that a two-stage pretreatment comprising of an alkaline pre-extraction followed by a Cu-catalyzed alkaline–oxidative treatment is effective at pretreating hardwoods under relatively mild reaction conditions. In this work, we focus on characterizing how biomass source and reaction conditions used during the alkaline pre-extraction impact the subsequent processing stages as well as lignin yields and properties. Specifically, three hybrid poplars were subjected to the first stage alkaline pre-extraction under various conditions including differences in time (15–300 min), temperature (95–155 °C), and alkali loadings (50–200 mg NaOH/g biomass), and the impact on total mass solubilization, lignin recovery, and lignin purity was determined. Empirical correlations were developed between reaction conditions and mass solubilization and lignin recovery during the pre-extraction stage. For select conditions, lignin properties were assessed and include β-O-4 content determined by 13C NMR, molecular mass distributions as determined by gel permeation chromatography, and susceptibility to depolymerization to aromatic monomers using thioacidolysis and formic acid catalyzed depolymerization. We found alkaline pre-extraction performed at higher temperatures generated lignins exhibiting lower contamination by polysaccharides, lower aromatic monomer yields from depolymerization, lower molar masses, and lower β-O-4 contents relative to the lower temperature pre-extractions. Lastly, the pre-extracted biomass from select conditions was assessed for its response to the subsequent Cu-catalyzed alkaline–oxidative treatment and enzymatic hydrolysis. It was demonstrated that minor differences in delignification during pre-extraction have quantifiable impacts on the subsequent efficacy of the second stage of pretreatment and enzymatic hydrolysis with improved lignin removal during the first pre-extraction stage resulting in improved hydrolysis yields.

09 BIOMASS FUELS↗

Spring Dust in Colorado Plateau: Transport Pathways and Interannual Variability Derived From Two Decades of MERRA‐2 Reanalysis

Spring dust storms in the U.S. Southwest significantly impact environmental and human systems, yet their climatological patterns and driving mechanisms remain poorly understood. Using two decades of MERRA-2 reanalysis data and self-organizing map clustering, we identified four distinct dust transport pathways from surrounding and remote deserts for the top 10% of spring dust events impacting the Colorado Plateau: (a) intense southwesterly near-surface transport where eastward upward transport is blocked by topography, (b) substantial remote transport plus weaker surface emissions, (c) moderate southwesterly transport with stronger upper-level transport, and (d) rare northwesterly pattern linked to the Great Basin sources, which accounts for 38%, 14%, 37%, and 11% of total events, respectively. The frequency and intensity of these events strongly correlate with large-scale climate variability, with increased dust events during La Niña. Our results provide a robust framework for improving seasonal dust forecasts and understanding future dust dynamics under climate change.

aerosol transport↗