Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Investigating Deposition Sequence During Synthesis of Pd/Al2O3 Catalysts Modified with Organic Monolayers

Modification of supported metal catalysts with self-assembled monolayers (SAMs) has been shown to improve selectivity and turnover frequencies (TOFs) for many catalytic reactions. However, these benefits are often accompanied by a decrease in overall mass activity due to partial blocking of active sites by the monolayers. Therefore, a potential method for increasing site accessibility is to deposit the active metal (e.g., Pd) after deposition of a SAM modifier on the support material. In this work, Pd/Al2O3 catalysts were synthesized using both a conventional, "metal-first" sequence in which the phosphonic acid (PA) SAM was deposited on Pd/Al2O3 and a "SAM-first" technique in which the ligands were deposited onto the support prior to deposition of the metal. Although metal-first catalysts showed a significant increase in TOF during benzyl alcohol HDO, they exhibited only a modest increase in overall mass activity due to a decrease in the number of active sites. Meanwhile, SAM-first catalysts showed similar improvements in TOF and toluene selectivity but exhibited significantly improved HDO rates compared to metal-first catalysts. The rate increase was attributed to reduced site blocking as evidenced by CO chemisorption measurements. Additionally, analysis of catalysts having high Pd loadings using transmission electron microscopy (TEM) showed that SAM-first catalysts generally resulted in lower average particle sizes than traditionally modified and unmodified catalysts, suggesting that precoating the support surface with PAs changes the way that Pd is deposited during incipient wetness, leading here to improved activity.

catalytic reactions↗
DOE OSTI2024

The ion-gas-neutral interactions with surfaces-2 (IGNIS-2) facility for the study of plasma–material interactions

The Ion-Gas-Neutral Interactions with Surfaces-2 (IGNIS-2) surface science facility has been designed at the Pennsylvania State University with the specific purpose of enabling experiments to study plasma–material interactions. This in situ surface modification and characterization facility consists of multiple reconfigurable substations that are connected through a central transfer chamber. This fully connected vacuum system ensures that the physical and chemical properties of samples are not altered between surface modification and analysis. The modification techniques in IGNIS-2 include a low-energy (<300 eV), high-flux (up to 1016 cm−2 s−1) broad-beam ion source, a liquid metal dropper, a lithium injection system, an RF sputter source, and an evaporator. Its characterization techniques include charged particle-based techniques, such as low-energy ion scattering (enabled by two <5 keV ion sources) and x-ray photoelectron spectroscopy, and photon and light-based techniques, such as x-ray fluorescence, multi-beam optical stress sensors, and optical cameras. All of these techniques can be utilized up to mTorr pressures, allowing both in situ and in operando studies to be conducted. Results are presented on lithium wetting experiments of argon-irradiated tungsten-based composites, surface stress measurements of tungsten films during deuterium ion irradiation, and temperature-programmed desorption of deuterium-irradiated graphite to demonstrate the in situ capabilities of this new facility.

Instruments & Instrumentation↗
NASA NTRS1984

Snowcover influence on backscattering from terrain

The effects of snowcover on the microwave backscattering from terrain in the 8-35 GHz region are examined through the analysis of experimental data and by application of a semiempirical model. The model accounts for surface backscattering contributions by the snow-air and snow-soil interfaces, and for volume backscattering contributions by the snow layer. Through comparisons of backscattering data for different terrain surfaces measured both with and without snowcover, the masking effects of snow are evaluated as a function of snow water equivalent and liquid water content. The results indicate that with dry snowcover it is not possible to discriminate between different types of ground surface (concrete, asphalt, grass, and bare ground) if the snow water equivalent is greater than about 20 cm (or a depth greater than 60 cm for a snow density of 0.3 g/cu cm). For the same density, however, if the snow is wet, a depth of 10 cm is sufficient to mask the underlying surface.

Ulaby, F. T.↗
DOE OSTI2021

Guiding light via slippery liquid-infused porous surfaces

Slippery liquid-infused porous surfaces (SLIPSs) have been explored for many applications, taking advantage of their highly non-wetting property. In this work, we explore the SLIPS as a cladding material for waveguiding. SLIPSs are prepared by infusing perfluoropolyether oil to hydrophobized nanoporous surfaces of silicon. Power loss and transmission efficiency of an HeNe laser (1.82 mW and 632.8 nm) with varying incident angles were measured through microchannels consisting of the SLIPSs as cladding layers (noil = 1.30) and water (nwater = 1.33) as a core, compared to other cladding types including a planar silicon surface and the nanoporous surfaces in hydrophilic (Wenzel state) and hydrophobic (Cassie–Baxter state) conditions with no oil infused. Agreeing with Snell's law, a total internal reflection occurs at the incident angle as high as 14° for the SLIPSs. The waveguide loss at 14° is only 1.8 dB/cm for the SLIPSs, while those for planar silicon, hydrophilic nanoporous, and hydrophobic nanoporous surfaces are 5.9, 7.4, and 4.9 dB/cm, respectively. The power transmission efficiency of the SLIPSs is independent of the porosity because the surfaces are fully covered with the oil layer, whereas those of hydrophilic and hydrophobic nanoporous surfaces, whose pores are filled with water and air, respectively, depend on the porosity. The significantly lower power loss and the insensitivity to the surface porosity are advantages of the SLIPSs over the other surfaces and can benefit in waveguiding applications such as optofluidics.

Asawa, Kaustubh (ORCID:0000000197142555)↗
NASA NTRSDate not supplied

Warming Reduces the Efficacy of Wet Conditions to Moderate Extreme Heat and Atmospheric Aridity Across the Central Plains

In the literature, dry land surface conditions possess a well-established association with extreme heat and high atmospheric aridity, especially in regions that experience strong land-atmosphere feedbacks. However, few studies have examined whether global warming will impact the ability of wet conditions to constrain high temperatures and atmospheric aridity occurrences. Here we investigate how wet conditions, which we define using precipitation and soil moisture, constrain high temperature and high vapor pressure deficit during the warm season over the Central Plains in North America at different global warming levels (0-3 degrees K). Using a CMIP6 multi-model ensemble, we show that absolute changes in the maximum temperature distribution outweigh the historical cooling effect of high precipitation or soil moisture conditions, reducing the probability of non-extreme maximum temperatures under global warming. Strikingly, the conditional likelihood of non-extreme maximum temperatures falls from 97-98% at baseline conditions to 50-58% at 1 degree of global warming. Once 2 degrees of warming is reached, there is very little probability of constraining extreme maximum temperatures. On the other hand, high precipitation and high soil moisture are able to better retain the ability to constrain concurrent high vapor pressure deficit conditions – moving from 99% at baseline conditions to 81-91% at 1 degree of warming and 26-42% at 2 degrees of warming. With our results, we find that the extent of this retention is dependent on how individual models represent relative changes in the VPD distribution as temperatures warm. Overall, our results highlight the growing vulnerability of the Central North American region to warmer temperatures and drier atmospheric conditions, even during periods of high precipitation and soil moisture.

Extreme heat↗
NASA NTRS1977

Mathematical and computational studies of equilibrium capillary free surfaces

The results of several independent studies are presented. The general question is considered of whether a wetting liquid always rises higher in a small capillary tube than in a larger one, when both are dipped vertically into an infinite reservoir. An analytical investigation is initiated to determine the qualitative behavior of the family of solutions of the equilibrium capillary free-surface equation that correspond to rotationally symmetric pendent liquid drops and the relationship of these solutions to the singular solution, which corresponds to an infinite spike of liquid extending downward to infinity. The block successive overrelaxation-Newton method and the generalized conjugate gradient method are investigated for solving the capillary equation on a uniform square mesh in a square domain, including the case for which the solution is unbounded at the corners. Capillary surfaces are calculated on the ellipse, on a circle with reentrant notches, and on other irregularly shaped domains using JASON, a general purpose program for solving nonlinear elliptic equations on a nonuniform quadrilaterial mesh. Analytical estimates for the nonexistence of solutions of the equilibrium capillary free-surface equation on the ellipse in zero gravity are evaluated.

Albright, N.↗
NASA NTRS1974

Study of recreational land and open space using Skylab imagery

The author has identified the following significant results. Despite almost uniform surface temperature conditions in the study area, the thermal imagery did illustrate the following possible uses: (1) Surface temperatures relative to 0 C reveal whether the snow and ice cover is wet and the melt pattern. This information is useful in hydrologic monitoring of runoff timing and rate, as well as indicating trafficability conditions on the snow. (2) When the surface temperature of snow and ice is below freezing, it may serve as an indicator of spatial variation of air temperatures. This information may be used in calculating the spatial variation of surface radiation budgets, or in observing synoptic weather condition changes or local microclimatic effects. (3) Frozen inland lakes with less than about three or four inches of snow over the ice may be differentiated from surrounding snow covered land areas; this is not always feasible in visible wavelength imagery. The feasibility of this application decreases as the ice thickness increases.

Sattinger, I. J.↗
NASA NTRS1987

Monsoon flood boundary delineation and damage assessment using space borne imaging radar and Landsat data

Space-borne synthetic aperture radar (SAR) data acquired by the Shuttle Imaging Radar-B (SIR-B) Program and Landsat Multispectral Scanner Subsystem (MSS) Data from Landsat 4 were used to map flood boundaries for the assessment of flood damage in the Peoples Republic of Bangladesh. The cloud penetrating capabilities of the L-band radar provided a clear picture of the hydrologic conditions of the surface during a period of inclement weather at the end of the wet phase of the 1984 monsoon. The radar image data were digitally processed to geometrically rectify the pixel geometry and were filtered to subdue radar image speckle effects. Contrast enhancement techniques and density slicing were used to create discrete land-cover categories corresponding to surface conditions present at the time of the Shuttle overflight. The radar image classification map was digitally registered to a spectral signature classification map of the area derived from Landsat MSS data collected two weeks prior to the SIR-B mission. Classification accuracy comparisons were made between the radar and MSS classification maps, and flood boundary and flood damage assessment measurements were made with the merged data by adding the classifications and inventorying the land-cover classes inundated at the time of flooding.

Imhoff, Marc L.↗
NASA NTRS2014

Multi-Decadal Aerosol Variations from 1980 to 2009: A Perspective from Observations and a Global Model

Aerosol variations and trends over different land and ocean regions during 1980-2009 are analyzed with the Goddard Chemistry Aerosol Radiation and Transport (GOCART) model and observations from multiple satellite sensors and ground-based networks. Excluding time periods with large volcanic influences, the tendency of aerosol optical depth (AOD) and surface concentration over polluted land regions is consistent with the anthropogenic emission changes.The largest reduction occurs over Europe, and regions in North America and Russia also exhibit reductions. On the other hand, East Asia and South Asia show AOD increases, although relatively large amount of natural aerosols in Asia makes the total changes less directly connected to the pollutant emission trends. Over major dust source regions, model analysis indicates that the dust emissions over the Sahara and Sahel respond mainly to the near-surface wind speed, but over Central Asia they are largely influenced by ground wetness. The decreasing dust trend in the tropical North Atlantic is most closely associated with the decrease of Sahel dust emission and increase of precipitation over the tropical North Atlantic, likely driven by the sea surface temperature increase. Despite significant regional trends, the model-calculated global annual average AOD shows little changes over land and ocean in the past three decades, because opposite trends in different regions cancel each other in the global average. This highlights the need for regional-scale aerosol assessment, as the global average value conceals regional changes, and thus is not sufficient for assessing changes in aerosol loading.

atmopheric aerosols↗
NASA NTRS1974

Preliminary road alinement through the Great Kavir in Iran by repetitive ERTS-1 coverage

Access to the Great Kavir is generally limited to the period August through October when some salt crusts will support limited vehicular movement. The condition of the salt crusts and their parent sediments during the long wet season have been unknown. This absence of information about the surface of the Great Kavir has prevented an intensive study of a possible road alinement which could shorten the present route between northern and central Iran by 760 km. False color diazo composites of bands 4, 5, and 7 were prepared from positives of ERTS-1 MSS images taken of the Great Kavir. These scenes presented a record of the seasonal hydrologic changes that occurred from the dry to the wet season. During the period of maximum inundation and lowest bearing strengths, as inferred from the image of May 12, 1973, it was possible to select a preliminary road alinement that would avoid the wettest or roughest areas and take advantage of the best terrain and shortest distance. The eventual road alinement should be based on a longer record of observation and on-site investigations.

Krinsley, D. B.↗
DOE OSTI2021

Advanced Water-Related Technology Performance Development

This U.S. Department of Energy/National Energy Technology Laboratory techno-economic analysis evaluates those parameters having the greatest performance and cost impact on wet flue gas desulfurization (FGD) effluent wastewater treatment systems, and air cooled condensers for dry cooling systems. Two supercritical pulverized coal power plants are considered: 1) an existing plant (modified for surface water discharge and air emissions consistent with limits for existing plants) retrofitted with wet FGD effluent wastewater treatment and 2) a greenfield plant constructed with an air-cooled condenser (ACC). Sensitivity analyses are completed on various process parameters associated with the wet FGD effluent wastewater treatment system and ACC to determine the impact on the net plant efficiency and levelized cost of electricity (LCOE). Research and development targets are recommended for the parameters shown to have the greatest potential impact on cost or performance.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS2002

The Effects of Ultra Thin Films on Dynamic Wetting

Dynamic wetting, the displacement of one fluid by another immiscible fluid on a surface, controls many natural and technological phenomena, such as coating, printing, spray painting and lubricating. Particularly in coating and spraying applications, contact lines advance across pre-existing fluid films. Most previous work has focused on contact lines advancing across films sufficiently thick that they behave as simple Newtonian fluids. Ultrathin films, where the film thickness may impinge on fundamental length scales in the fluid, have received less attention. In this talk, we will discuss the effects of ultrathin polymer films on dynamic wetting. We measure the interface shape within microns of moving contact lines advancing across preexisting films and compare the measurements to existing models of viscous bending for interfaces advancing across dry surfaces and 'thick' (in the sense that they behave as liquids) films. In the experiments, we advance a contact line of 10-poise and 1-poise polydimethylsiloxane (silicone oil) across pre-coated films of the same fluid with thickness from a single chain thickness (approx. 10 A) through a couple of radii of gyration (100-200 A) to films so thick they are likely bulk in behavior (10(exp 3) A). All films are physisorbed, i.e. they readily rinse from the surface. Thus, molecules in the film are not anchored to the surface and can move within the film if the hydrodynamics dictate such motion. For films of the thickness of a single chain (approx. 10 A), our experiments indicate that the advancing fluid behaves just as it would if it advanced over a dry surface. For the thicker films (10(exp 3) A), we find behavior indicating that the molecules in the film are acting as a fluid with the bulk properties. In this regime, results for the two different fluids are identical when the experiments are performed at the same pre-existing film thickness and advancing capillary number, Ca. For film of thickness of a few radii of gyration (approx. 100-200 A), the behavior depends on Ca of the advancing meniscus. At low Ca, the viscous bending of the interface near the contact line does not behave as it would on a dry surface. It has a lower curvature than expected. However, at higher Ca, the viscous bending is described by the model for spreading over a dry surface. These results show that the fluid flow in the film does behave differently than bulk as the film thickness becomes comparable to molecular length scale. But even more intriguing is the unusual velocity dependence of that behavior where the film behaves more solid-like at higher contact line speeds. We will discuss these results in terms of the properties of confined polymer melts.

Chen, Xia↗
DOE OSTI2025

Processed Soil Respiration at the TRACE experimental Warming project, Aug 2015 - Sep 2017, Sabana, Luquillo, Puerto Rico

This data package contains processed measurements of soil carbon dioxide (CO₂) efflux collected using LI-COR LI-8100 soil respiration chambers at the Tropical Responses to Altered Climate Experiment (TRACE) located at the Sabana Field Research Station near Luquillo, Puerto Rico. The TRACE site is a mature, closed-canopy tropical wet forest within the Luquillo Experimental Forest. These data quantify soil surface CO₂ fluxes from both ambient (control) and experimentally warmed plots to evaluate how long-term soil warming affects belowground carbon cycling in tropical ecosystems. The data files include time-series tables of CO₂ flux (µmol CO₂ m⁻² s⁻¹), soil temperature (°C), and ancillary environmental variables, stored in comma-separated values (CSV) format and viewable with any text editor, spreadsheet, or statistical software (e.g., R, Python, Excel). Associated metadata describe plot identifiers, measurement intervals, and processing steps. These data were generated to address the research question: How does sustained soil warming influence soil respiration and carbon flux dynamics in tropical wet forests?

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Lower Urban Humidity Moderates Outdoor Heat Stress

Abstract Surface temperature is often used to examine heat exposure in multi‐city studies and for informing urban heat mitigation efforts due to scarcity of urban air temperature measurements. Cities also have lower relative humidity, traditionally not accounted for in large‐scale observational urban heat risk assessments. Here, using crowdsourced measurements from over 40,000 weather stations in ≈600 urban clusters in Europe, we show the moderating effect of this urbanization‐induced humidity reduction on outdoor heat stress during the 2019 heatwave. We demonstrate that daytime differences in heat index between urban clusters and their surroundings are weak, and associations of this urban‐rural difference with background climate, generally examined from the surface temperature perspective, are diminished due to moisture feedbacks. We also examine the spatial variability of surface temperature, air temperature, and heat index within these clusters—relevant for detecting hotspots and potential disparities in heat exposure—and find that surface temperature is a poor proxy for the intra‐urban distribution of heat index during daytime. Finally, urban vegetation shows much weaker (∼1/6th as strong) associations with heat index than with surface temperature, which has broad implications for optimizing urban heat stress mitigation strategies. These findings are valid for operational metrics of heat stress for shaded conditions (apparent temperature and humidex), thermodynamic proxies (wet‐bulb temperature), and empirical heat indices. Based on this large‐scale empirical evidence, surface temperature, used due to the lack of better alternatives, may not be suitable for accurately informing heat mitigation strategies within and across cities, necessitating more urban‐scale observations and better urban‐resolving models.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2018

Sediment Transport and Aqueous Alteration in a Mars-Analog Glacial System

The bulk of the Martian crust is basaltic with a wide variety of subsequently derived aqueous alteration phases. Study of analogue terrains is vital to better understand the weathering of such mafic bedrock at a range of surface temperatures. Moreover, climatic models have suggested that the early Martian climate was not warm and wet, but cold and icy, with some of the apparent fluvial and lacustrine features attributable to transient melting of ice sheets as opposed to persistent surface water. This study examines sediment samples from Collier glacial valley, Three Sisters, Oregon (OR), with the aim of better characterizing erosion, transport, and in situ aqueous alteration in a glaciated Mars-analogue terrain.

Bamber, E. R.↗
NASA NTRS1999

Where is the Geochemical Evidence for a Warm Wet Mars?

Groundbased and spacecraft data continue to tell contradictory stories of how the surface of Mars evolved. On one hand, there is clear evidence for the important role water has had shaping the geomorphology of the Martian surface. On the other hand, the geochemical signature of extended liquid water - rock interactions has not been detected. Recon-ciling these data is critical to understanding the biological potential of Mars and to developing an effective approach to search for evidence of life on Mars. Additional information is contained in the original extended abstract.

Blaney, D. L.↗
NASA NTRS2001

Relative Influence of Initial Surface and Atmospheric Conditions on Seasonal Water and Energy Balances

We constructed and analyzed wet and dry soil moisture composites for the mid-latitude GCIP region of the central US using long climate model simulations made with the NCAR CCM3 and reanalysis products from NCEP. Using the diagnostic composites as a guide, we have completed a series of predictability experiments in which we imposed soil water initial conditions in CCM3 for the GCIP region for June 1 from anomalously wet and dry years, with atmospheric initial conditions taken from June 1 of a year with 'near-normal' soil water, and initial soil water from the near-normal year and atmospheric initial conditions from the wet and dry years. Preliminary results indicate that the initial state of the atmosphere is more important than the initial state of soil water determining the subsequent late spring and summer evolution of sod water over the GCIP region. Surprisingly, neither the composites or the predictability experiments yielded a strong influence of soil moisture on the atmosphere. To explore this further, we have made runs with extreme dry soil moisture initial anomalies imposed over the GCIP region (the soil close to being completely dry). These runs did yield a very strong effect on the atmosphere that persisted for at least three months. We conclude that the magnitude of the initial soil moisture anomaly is crucial, at least in CCM3, and are currently investigating whether a threshold exists, below which little impact is seen. In a complementary study, we compared the impact of the initial condition of snow cover versus the initial atmospheric state over the western US (corresponding to the westward extension of the GAPP program follow-on to GCIP). In this case, the initial prescription of snow cover is far more important than the initial atmospheric state in determining the subsequent evolution of snow cover. We are currently working to understand the very different soil water and snow cover results.

Oglesby, Robert J.↗
NASA NTRSDate not supplied

The New Moon is wet…

Not that long ago, we understood the Moon very differently… Old beliefs were: - Surface was relative constant - Bone dry Now we know that Water-Ice exists in Permanently Shadowed Regions at the Poles

Artemis↗