Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution processable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Dynamic spectral characteristics of thermal models for solar hard X-ray bursts

It is proposed that the source for solar hard X-ray bursts may consist of a distribution of many small impulsively-heated kernels, each cooled by anomalous conduction, with lifetimes shorter than current burst data temporal resolution. The dynamic spectra of bursts are governed by the dynamic evolution of the kernel production process, such as magnetic-field dissipation in the tearing mode. An integral equation is formulated, the solution of which yields information on this kernel production process from dynamic burst spectra, for any kernel model.

Brown, J. C.↗

A unifying comparison of nearly scatter free transport models

Gombosi et al. (1993) recently derived a modified telegrapher's equation for charged particle transport under the influence of isotropic scattering. This equation obeys causality and disallows upstream diffusion for particles with random velocities smaller than the bulk flow velocity. The acausal diffusion equation was obtained to lowest order in the expansion of smallness prameters. The paper by Gombosi et al. (1993) prompted responses from Pauls et al. (1993) and Earl (1993). This paper is written to explain the differences between the methods, assumptions, and results of Gombosi et al. (1993), Pauls et al. (1993), and Earl (1993) and presents a new method of obtaining approximate solutions. It is shown that the assumptions used by Gombosi et al. (1993) and Pauls et al. (1993) are physically equivalent. In our solution method, the solution of the modified telegrapher's equation is obtained as the casual limit of solutions accurate to second order in the smallness parameter expansion. In order to investigate the coherent velocity, we have also developed `wavenumber eigenfunctions' which account for all the pitch angle dependence in our Boltzmann equation. Using truncation, Earl (1993) obtains approximations for the wavenumber dependence of the lowest two frequency modes, which correspond to two of the wavenumber eigenmodes. We find that a consequence of including only two wavenumber eigenmodes is that one obtains solutions which disobey causality at sufficiently short times. Furthermore, the coherent velocity of the two eigenmodes is strongly dependent on wavenumber and approaches the particle velocity in the limit of large wavenumber for both isotropic and anisotropic scattering processes. We conclude that Earl's (1993) solutions and solutions obtained using the new solution method implicitly assume weak acausality and reasonable behavior in the temporal regime, t less than 4 tau. The solutions are not strictly consistent with the behavior of the lowest two frequency modes but have similar behavior in the regime of low wavenumber.

Schwadron, N. A.↗

On the nature of bias and defects in the software specification process

Implementation bias in a specification is an arbitrary constraint in the solution space. This paper describes the problem of bias. Additionally, this paper presents a model of the specification and design processes describing individual subprocesses in terms of precision/detail diagrams and a model of bias in multi-attribute software specifications. While studying how bias is introduced into a specification we realized that software defects and bias are dual problems of a single phenomenon. This was used to explain the large proportion of faults found during the coding phase at the Software Engineering Laboratory at NASA/GSFC.

Straub, Pablo A.↗

Analysis of dynamic system response to product random processes

The response of dynamic systems to the product of two independent Gaussian random processes is developed by use of the Fokker-Planck and associated moment equations. The development is applied to the amplitude modulated process which is used to model atmospheric turbulence in aeronautical applications. The exact solution for the system response is compared with the solution obtained by the quasi-steady approximation which omits the dynamic properties of the random amplitude modulation. The quasi-steady approximation is valid as a limiting case of the exact solution for the dynamic response of linear systems to amplitude modulated processes. In the nonlimiting case the quasi-steady approximation can be invalid for dynamic systems with low damping.

Sidwell, K.↗

Model-Based Thermal System Design Optimization for the James Webb Space Telescope

Spacecraft thermal model validation is normally performed by comparing model predictions with thermal test data and reducing their discrepancies to meet the mission requirements. Based on thermal engineering expertise, the model input parameters are adjusted to tune the model output response to the test data. The end result is not guaranteed to be the best solution in terms of reduced discrepancy and the process requires months to complete. A model-based methodology was developed to perform the validation process in a fully automated fashion and provide mathematical bases to the search for the optimal parameter set that minimizes the discrepancies between model and data. The methodology was successfully applied to several thermal subsystems of the James Webb Space Telescope (JWST). Global or quasiglobal optimal solutions were found and the total execution time of the model validation process was reduced to about two weeks. The model sensitivities to the parameters, which are required to solve the optimization problem, can be calculated automatically before the test begins and provide a library for sensitivity studies. This methodology represents a crucial commodity when testing complex, large-scale systems under time and budget constraints. Here, results for the JWST Core thermal system will be presented in detail.

Cataldo, Giuseppe↗

Crystal growing by electrodeposition from dense gaseous solutions

Single crystals and dendritic formations of silver are grown on platinum electrodes by electrodeposition from a dense gaseous solution of silver nitrate in ammonia. Process is modification of hydrothermal process, and also differs from standard electrodeposition by permitting single crystals to be grown from hydrogen-bonded solvents.

Naiditch, S.↗

Optimum propellant usage for reaction jet systems of space vehicles

The on-off type control for reaction jet systems is proven to be the optimal fuel scheme. However, due to the nonlinear characteristics of this type control, no direct method of solution is known for this optimal process being applied to the attitude control of space vehicles. This paper will discuss the optimization of fuel usage for an attitude control of space vehicles. A computation technique is developed for the calculation of optimal control law. The method of calculus of variations is applied to the estimation of the changes of performance index as well as terminal constraints. Thus an algorithm is obtained by the steepest descent method. A numerical example is given in the paper.

Liu, T. C.↗

Planning and operating experiment S-183 on the three Skylab missions

The Skylab vehicle from its first conception until its flight underwent several iterations. In a similar manner, the scientific experiments changed in both their physical appearance and operational mode because of the evolution of Skylab. In some cases the scientific requirements changed operational requirements of Skylab. The interactions between Skylab and the scientific experiments objectives as well as individual experiment problems are the subject of this paper. The authors use examples from the experiment S-183 (Ultraviolet Panorama) as well as examples from sophisticated groups of experiments such as the Apollo Telescope Mount (ATM). Examples of the positive aspects of the operation are indicated as well as problems, their solution, and the decision-making process. Various phases of the program are discussed and important aspects emphasized. Some general conclusions and recommendations are presented which, hopefully, will aid potential experimenters on Shuttle payloads.

Atkins, H. L.↗

Deburring die-castings by wet vibratory plant

A wet vibratory procedure for the removal of burrs from die castings is described. In this process synthetic abrasive chips and detergent solutions are agitated with the work in such a way as to produce a spiral circulatory movement. Details of various forms of vibrator basin and shapes of abrasive are illustrated. The automation of deburring is illustrated through the application of vibrators of spiral design in combination with transport and drying devices.

Loeschbart, H. M.↗

Evaluation of computing systems using functionals of a Stochastic process

An intermediate model was used to represent the probabilistic nature of a total system at a level which is higher than the base model and thus closer to the performance variable. A class of intermediate models, which are generally referred to as functionals of a Markov process, were considered. A closed form solution of performability for the case where performance is identified with the minimum value of a functional was developed.

Meyer, J. F.↗

Thermal Polymerization of N-Butyl Acrylate

Simple new polymerization method enables production of n-butyl acrylate polymer of desired high molecular weight, without disadvantages that usually attend more conventional methods. Process, which is hybrid of thermal, solution, and emulsion polymerization methods, involves controlled thermal polymerization of monomer at moderate temperatures without use of catalysts or additives.

Ingham, J. D.↗

Preparation and characterization of a siloxane containing bismaleimide

A novel siloxane containing bismaleimide has been prepared by reacting maleic anhydride, benzophenonetetracarboxylic dianhydride and bis(gamma-aminopropyl)tetramethyldisiloxane. Characterization of this monomer was done by comparing its nuclear magnetic resonance spectrum (NMR) to those of model compounds. Solubility of the prepolymer was tested in amide, chlorinated and ether solvents. Films were cast from solution as well as by melt processing and a cure cycle was determined. Infrared spectrum (IR) of the resulting film was obtained. Thermal polymerization was investigated by differential scanning calorimetry (DSC). Thermal properties of the cured resin were followed by means of thermogravimetric analysis (TGA), torsional braid analysis (TBA) and dynamic mechanical analysis (DMA). Thermomechanical analysis (TMA) was used to study the effect of postcure on the glass transition temperature (Tg) of the resin. Adhesive strength of the resin was obtained at ambient temperature.

Maudgal, S.↗

Optimum data weighting and error calibration for estimation of gravitational parameters

A new technique was developed for the weighting of data from satellite tracking systems in order to obtain an optimum least squares solution and an error calibration for the solution parameters. Data sets from optical, electronic, and laser systems on 17 satellites in GEM-T1 (Goddard Earth Model, 36x36 spherical harmonic field) were employed toward application of this technique for gravity field parameters. Also, GEM-T2 (31 satellites) was recently computed as a direct application of the method and is summarized here. The method employs subset solutions of the data associated with the complete solution and uses an algorithm to adjust the data weights by requiring the differences of parameters between solutions to agree with their error estimates. With the adjusted weights the process provides for an automatic calibration of the error estimates for the solution parameters. The data weights derived are generally much smaller than corresponding weights obtained from nominal values of observation accuracy or residuals. Independent tests show significant improvement for solutions with optimal weighting as compared to the nominal weighting. The technique is general and may be applied to orbit parameters, station coordinates, or other parameters than the gravity model.

Lerch, F. J.↗

Optimum data weighting and error calibration for estimation of gravitational parameters

A new technique was developed for the weighting of data from satellite tracking systems in order to obtain an optimum least-squares solution and an error calibration for the solution parameters. Data sets from optical, electronic, and laser systems on 17 satellites in GEM-T1 Goddard Earth Model-T1 (GEM-T1) were employed toward application of this technique for gravity field parameters. Also GEM-T2 (31 satellites) was recently computed as a direct application of the method and is summarized. The method employs subset solutions of the data associated with the complete solution to agree with their error estimates. With the adjusted weights the process provides for an automatic calibration of the error estimates for the solution parameters. The data weights derived are generally much smaller than corresponding weights obtained from nominal values of observation accuracy or residuals. Independent tests show significant improvement for solutions with optimal weighting. The technique is general and may be applied to orbit parameters, station coordinates, or other parameters than the gravity model.

Lerch, Francis J.↗

Crack problems involving nonhomogeneous interfacial regions in bonded materials

Consideration is given to two classes of fracture-related solid mechanics problems in which the model leads to some physically anomalous results. The first is the interface crack problem associated with the debonding process in which the corresponding elasticity solution predicts severe oscillations of stresses and the crack surface displacements vary near the crack tip. The second deals with crack intersecting the interface. The nature of the solutions around the crack tips arising from these problems is reviewed. The rationale for introducing a new interfacial zone model is discussed, its analytical consequences within the context of the two crack-problem classes are described, and some examples are presented.

Erdogan, F.↗

Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 2: Ground operations problems

Operations problems and cost drivers were identified for current propulsion systems and design and technology approaches were identified to increase the operational efficiency and to reduce operations costs for future propulsion systems. To provide readily usable data for the ALS program, the results of the OEPSS study were organized into a series of OEPSS Data Books. This volume presents a detailed description of 25 major problems encountered during launch processing of current expendable and reusable launch vehicles. A concise description of each problem and its operational impact on launch processing is presented, along with potential solutions and technology recommendation.

Waldrop, Glen S.↗

Asteroid and comet orbits using radar data

For the 30 asteroids and 4 comets for which radar astrometric data were given by Ostro (1991), orbits have been computed using both the radar and the existing optical measurements. The techniques required to process radar data in orbit determination solutions are outlined, and future radar observation opportunities for asteroids and comets are identified. For asteroids and comets that have only short intervals of optical astrometric data, the additional use of only a few radar observations allows a far more accurate extrapolation of their future motions. The use of radar data can often ensure an object's successful recovery at future earth returns and greatly assist efforts in monitoring the motions of the rapidly growing population of known near-earth objects, including their future close-earth approaches.

Yeomans, D. K.↗