SEARCH · Engineering Papers
Results for “solid state physics”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
IF03: Solid State Detectors and Tracking Key Points [Slides]
Explore the source record for details and available documents.
Signatures of ambient pressure superconductivity in thin film La 3 Ni 2 O 7
Recently, the bilayer nickelate La 3 Ni 2 O 7 has been discovered as a new superconductor with transition temperature T c near 80 K under high pressure. Despite extensive theoretical and experimental work to understand the nature of its superconductivity, the requirement of extreme pressure restricts the use of many experimental probes and limits its application potential. Here, in this work, we present signatures of superconductivity in La 3 Ni 2 O 7 thin films at ambient pressure, facilitated by the application of epitaxial compressive strain. The onset T c varies approximately from 26 K to 42 K, with higher T c values correlating with smaller in-plane lattice constants. We observed the co-existence of other Ruddlesden-Popper phases within the films and dependence of transport behavior with ozone annealing, suggesting that the observed low zero resistance T c of around 2 K can be attributed to stacking defects, grain boundaries, and oxygen stoichiometry. This finding initiates numerous opportunities to stabilize and study superconductivity in bilayer nickelates at ambient pressure, and to facilitate the broad understanding of the ever-growing number of high temperature and unconventional superconductors in the transition metal oxides.
The ISOLDE facility and the HIE-HISOLDE project: Recent highlights
The ISOLDE facility at CERN has as objective the production, study and research of nuclei far from stability. The facility provides low energy radioactive beams and post-accelerated beams. In the last 45 years the ISOLDE facility has gathered unique expertise in research with radioactive beams. Over 700 isotopes of more than 70 elements have been used in a wide range of research domains, including cutting edge studies in nuclear structure, atomic physics, nuclear astrophysics, and fundamental interactions. These nuclear probes are also used to do frontier research in solid state and life sciences. There is an on-going upgrade of the facility, the HIE-ISOLDE project, which aims to improve the ISOLDE capabilities in a wide front, from an energy increase of the post-accelerated beam to improvements in beam quality and beam purity. The first phase of HIE-ISOLDE will start for physics in the autumn of 2015 with an upgrade of energy for all post-accelerated ISOLDE beams up to 5.5 MeV/u. In this contribution the most recent highlights of the facility are presented.
Synthesis and Structural Characterization of Novel Intermetallic Clathrates – Prospective Materials for Thermoelectric Applications
The overall objective of the project is to contribute to the development of the fundamental chemistry and physics of new intermetallic clathrates (open framework materials) that can find applications in solid-state energy conversion. Such materials are termed thermoelectric materials and they possess the unique property that a temperature gradient induces a separation of charge in them. Thermoelectric materials are of great practical importance because of their potential for widespread applications in power generation or in cooling devices. Recently, new complex inorganic materials with open framework structures, such as skutterudites and clathrates have been suggested to be a breakthrough in the thermoelectric energy conversion. The basic hypothesis for the thermoelectric properties of such “host-guest” structures is that the conducting host-framework provides a high Seebeck coefficient (S) and electrical conductivity (σ), while low-lying optical modes, associated with the vibration of the guest-atoms, hybridize with the acoustic modes. The proposed interdisciplinary efforts are the initial part of a broader, collaborative program to investigate the structure-bonding-properties relationships in related intermetallic compounds. More specifically, our work is aimed at: 1. Comprehensive and systematic investigations of the crystal chemistry and stoichiometry breadth of new semiconducting clathrates with the type-II or type-III structures. 2. Precise determination of the composition with minimum occupancy of the cages, needed for the thermodynamic stability of the clathrate framework, coupled with investigations to verify the possibility of “rattling” atoms inside the open-framework structure. 3. Extensive physical property measurements (S, σ, k, R H , C p , $\chi_{m}$). Ultimately, this new phenomenology will be used as a foundation for the rational tuning of potentially interesting properties of the newly synthesized materials.
Realization of optical bistability and multistability in Landau-quantized graphene
The solution of input-output curves in an optical ring cavity containing Landau-quantized graphene is theoretically investigated taking the advantage of density-matrix method. It is found that under the action of strong magnetic and infrared laser fields, one can efficiently reduce the threshold of the onset of optical bistability (OB) at resonance condition. At non-resonance condition, we observed that graphene metamaterial can support the possibility to obtain optical multistability (OM), which is more practical in all-optical switching or coding elements. We present an analytical approach to elucidate our simulations. Due to very high infrared optical nonlinearity of graphene stemming from very unique and unusual properties of quantized Landau levels near the Dirac point, such controllability on OB and OM may provide new technological possibilities in solid state quantum information science.
Role of Boron in Enhancing the Catalytic Performance of Supported Platinum Catalysts for the Nonoxidative Dehydrogenation of n -Butane
Platinum-based supported catalysts for hydrocarbon conversion are among the most effective for selective dehydrogenation and isomerization processes. However, high process temperatures and the possibility of coke formation require catalyst modifications to mitigate such effects. One of the emerging approaches to prevent platinum catalyst deactivation is the use of boron additives that have been proposed to prevent coking. Despite such a valuable property of boron, the mechanisms for extending the catalyst lifetime and the decrease in coke formation based on this method are still poorly understood. The type and transformations of boron species on silica surface were investigated as a function of boron introduction, platinum addition, catalyst activation, and catalytic reactivity by a combination of X-ray photoelectron spectroscopy, electron microscopy, solid-state nuclear magnetic resonance spectroscopy, and density functional theory calculations to uncover the possible role of boron modification in improving the catalytic performance. Catalytic nonoxidative dehydrogenation of n-butane revealed that incorporation of boron improved the catalytic activity (similar to 3x) and stability of Pt/SiO 2 . The role of boron in enhancing catalytic performance was attributed to facilitating the migration of alkyl groups from platinum catalytic centers to tetrahedrally coordinated boron sites.
Rapid characterization of microscopic two-level systems using Landau-Zener transitions in a superconducting qubit
We demonstrate a fast method to detect microscopic two-level systems in a superconducting phase qubit. By monitoring the population leak after sweeping the qubit bias flux, we are able to measure the two-level systems that are coupled with the qubit. Compared with the traditional method that detects two-level systems by energy spectroscopy, our method is faster and more sensitive. This method supplies a useful tool to investigate two-level systems in solid-state qubits.
Measuring Long-Range 13 C– 13 C Correlations on a Surface under Natural Abundance Using Dynamic Nuclear Polarization-Enhanced Solid-State Nuclear Magnetic Resonance [Measuring Long Range 13 C– 13 C Correlations on Surface under Natural Abundance Using DNP-enhanced Solid-state NMR]
Here, we report that spatial (<1 nm) proximity between different molecules in solid bulk materials and, for the first time, different moieties on the surface of a catalyst, can be established without isotope enrichment by means of homonuclear CHHC solid-state nuclear magnetic resonance experiment. This 13 C– 13 C correlation measurement, which hitherto was not possible for natural-abundance solids, was enabled by the use of dynamic nuclear polarization. Importantly, it allows the study of long-range correlations in a variety of materials with high resolution.
A brief update of angle-resolved photoemission spectroscopy on a correlated electron system
In this paper, we briefly summarize the capabilities of state-of-the-art angle-resolved photoemission spectroscopy (ARPES) in the field of experimental condensed matter physics. Due to the advancement of the detector technology and the high flux light sources, ARPES has become a powerful tool to study the low energy excitations of solids, especially those novel quantum materials in which many-body physics are at play. To benchmark today's state-of-the-art ARPES technique, we demonstrate that the precision of today's ARPES has advanced to a regime comparable to the bulk-sensitive de Haas-van Alphen (dHvA) measurements. Finally, as an example of new discoveries driven by the advancement of the ARPES technique, we summarize some of our recent ARPES measurements on underdoped high-T{sub c} superconducting cuprates, which have provided further insight into the complex pseudogap problem.
Valley splittings in Si/SiGe quantum dots with a germanium spike in the silicon well
Silicon-germanium heterostructures have successfully hosted quantum dot qubits, but the intrinsic near-degeneracy of the two lowest valley states poses an obstacle to high-fidelity quantum computing. Here we present a modification to the Si/SiGe heterostructure by the inclusion of a spike in germanium concentration within the quantum well in order to increase the valley splitting. The heterostructure is grown by chemical vapor deposition and magnetospectroscopy is performed on gate-defined quantum dots to measure the excited state spectrum. We demonstrate a large and widely tunable valley splitting as a function of applied vertical electric field and lateral dot confinement. We further investigate the role of the germanium spike by means of tight-binding simulations in single-electron dots and show a robust doubling of the valley splitting when the spike is present, as compared to a standard (spike-free) heterostructure. This doubling effect is nearly independent of the electric field, germanium content of the spike, and spike location. This experimental evidence of a stable, tunable quantum dot, despite a drastic change to the heterostructure, provides a foundation for future heterostructure modifications.
Synthesis of a series of rare-earth-based multi-anion chalcogenide iodides RE 3 Si 2 Se x S 8− x I (RE = La, Ce, Pr, and Nd) using the flux-assisted boron–chalcogen mixture method
Single crystals and polycrystalline powders of rare earth mixed chalcogenide iodides La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, Pr 3 Si 2 Se 1.22 S 6.78 I, and Nd 3 Si 2 Se 1.18 S 6.82 I were prepared using the reactive flux-assisted boron–chalcogen mixture (BCM) method at 850 °C. All compounds crystallized in the monoclinic crystal system, space group C2/c (space group number 15). The series adopts the La 3 Si 2 O 8 Cl structure type, containing isolated SiQ 4 tetrahedra connected by REQ 8 (RE = La, Ce, Pr and Nd) polyhedra; this arrangement creates tunnels that are filled by I atoms. The partial substitution of S by Se was carried out to modulate the optical properties. Phase pure samples and uniform solid solutions were obtained for all compositions as determined using powder X-ray diffraction patterns. Polycrystalline powders were used for physical property measurements, including magnetic susceptibility and UV-Vis diffuse reflectance. The solid-state UV-Vis data for the polycrystalline La 3 Si 2 Se 1.21 S 6.79 I, Ce 3 Si 2 Se 1.39 S 6.61 I, and Pr 3 Si 2 Se 1.22 S 6.78 I samples revealed band gaps of E g = 2.5(1), 2.2(1), and 2.3(1) eV, typical of semiconductors. Magnetic measurements indicated that Ce 3 Si 2 Se 1.39 S 6.61 I and Nd 3 Si 2 Se 1.18 S 6.82 I exhibit paramagnetic behavior with slightly negative Weiss constants θ = −25 and −38. The photoluminescence spectrum of Ce 3 Si 2 Se 1.39 S 6.61 I exhibits a broad emission band around ∼493 nm.
Recent advances in the application of total scattering methods to functional materials
In this Feature Article we provide a description of some of the most recent results obtained in the field of materials science by means of total scattering methods and PDF analysis. Particular attention is devoted to the application of PDF to functional materials and to examples demonstrating the combination of PDF with other solid state chemistry techniques.
Electrodynamics and quantum capacity: The case of Bi{sub 2}Se{sub 3} topological insulator
Layered Bi-chalcogenide topological insulators are among the most available energy conversion (thermoelectric) and storage (battery) materials. Motivated by this applied aspect of fundamental importance and the good agreement between theory and key experiments probing spectroscopy and dc transport, we undertake a detailed study of electrodynamic responses of bulk Bi{sub 2}Se{sub 3} topological insulator. In particular, we confirm that the interplay between spin-orbit and electron correlations underpins its bulk metallicity. We show the implications of our proposal for the multi-channel nature of galvanostatic, voltage-capacity profiles intrinsic to Li{sub x}Bi{sub 2}Se{sub 3} battery material. Supported by a microscopic description of quantum capacity, we predict that layered Bi-based topological insulators are promising candidates for future high-voltage solid-state batteries.
Semiconductor nanocrystal quantum dot synthesis approaches towards large-scale industrial production for energy applications
This study reviews the experimental synthesis and engineering developments that focused on various green approaches and large-scale process production routes for quantum dots. Fundamental process engineering principles were illustrated. In relation to the small-scale hot injection method, our discussions focus on the non-injection route that could be scaled up with engineering stir-tank reactors. In addition, applications that demand to utilize quantum dots as "commodity" chemicals are discussed, including solar cells and solid-state lightings.
Strain-induced creation and switching of anion vacancy layers in perovskite oxynitrides
Perovskite oxides can host various anion-vacancy orders, which greatly change their properties, but the order pattern is still difficult to manipulate. Separately, lattice strain between thin film oxides and a substrate induces improved functions and novel states of matter, while little attention has been paid to changes in chemical composition. Here we combine these two aspects to achieve strain-induced creation and switching of anion-vacancy patterns in perovskite films. Epitaxial SrVO 3 films are topochemically converted to anion-deficient oxynitrides by ammonia treatment, where the direction or periodicity of defect planes is altered depending on the substrate employed, unlike the known change in crystal orientation. First-principles calculations verified its biaxial strain effect. Like oxide heterostructures, the oxynitride has a superlattice of insulating and metallic blocks. Given the abundance of perovskite families, this study provides new opportunities to design superlattices by chemically modifying simple perovskite oxides with tunable anion-vacancy patterns through epitaxial lattice strain.
Direct Solid-State Conversion of Recyclable Metals and Alloys
Friction Stir Extrusion (FSE) is a novel energy-efficient solid-state material synthesis and recycling technology capable of producing large quantity of bulk nano-engineered materials with tailored, mechanical, and physical properties. The novelty of FSE is that it utilizes the frictional heating and extensive plastic deformation inherent to the process to stir, consolidate, mechanically alloy, and convert the powders, chips, and other recyclable feedstock materials directly into useable product forms of highly engineered materials in a single step (see Figure 1). Fundamentally, FSE shares the same deformation and metallurgical bonding principles as in the revolutionary friction stir welding process. Being a solid-state process, FSE eliminates the energy intensive melting and solidification steps, which are necessary in the conventional metal synthesis processes. Therefore, FSE is highly energy-efficient, practically zero emissions, and economically competitive. It represents a potentially transformational and pervasive sustainable manufacturing technology for metal recycling and synthesis. The goal of this project was to develop the technological basis and demonstrate the commercial viability of FSE technology to produce the next generation highly functional electric cables for electricity delivery infrastructure (a multi-billion dollar market). Specific focus of this project was to (1) establish the process and material parameters to synthesize novel alloys such as nano-engineered materials with enhanced mechanical, physical, and/or functional properties through the unique mechanical alloying capability of FSE, (2) verifying the expected major energy, environmental, and economic benefits of FSE technology for both the early stage 'showcase' electric cable market and the anticipated pervasive future multi-market applications across several industry sectors and material systems for metal recycling and sustainable manufacturing.
Near-optimal combination of high performance and insensitivity in a shock compressed high explosive single crystal
Achieving the desired combination of superior detonation performance and insensitivity to shock initiation has been a long-standing goal in high explosive (HE) science and technology. Having previously established the shock insensitivity of 1,1-diamino-2,2-dinitroethene (also known as DADNE or FOX-7) single crystals to 20 GPa (extended to 25 GPa in this work), the FOX-7 detonation response was determined through wave profile measurements in ~250 μm thick single crystals shock compressed to 64 GPa. Quite unexpectedly, FOX-7 demonstrated the classic Chapman–Jouguet (C–J) detonation response—reaction completion in the detonation front (<0.7 ns) at pressures of 44 GPa and higher—not observed in other insensitive high explosives. Here, the experimentally determined C–J pressure (35 GPa), detonation wave velocities and the detonation products equation of state—together with shock insensitivity to 25 GPa—demonstrate that FOX-7 single crystals display a near-optimal combination of high performance and shock insensitivity, not observed in another HE crystal.