Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Topographic evidence for shield volcanism on Io

Similarities between terrestrial shield volcanoes and a volcano on Io observed in Voyager I imagery of the satellite at 30 deg S, 246 deg W are delineated. A photoclinometry model was used to numerically estimate the slope based on the Minnaert photometric function. The slope values are accurate to within 10 deg on the sun-facing slope and 1 deg on the shadow side. As found with shield volcanoes, the feature has a central edifice, 40-50 km in diameter, and a broad, elliptical base, 77 x 90 km across. The summit of the Io volcano is 2.2-2.8 km above the surrounding plane and contains a caldera about 5 km in diameter. The similarity in shape between basaltic terrestrial shield volcanoes and the Io volcano indicates that the Io feature may also be composed of basalt. The composition could be sulfur if the heat flow was under 0.05 W/sq m, as it might have been in later stages of formation.

Moore, J. M.↗
NASA NTRS1988

Fractography of composite delamination

Studies were made of the fractography of mode 2 delamination and the impact damage of carbon fiber reinforced polymer composites. Laminates fractured under mode 2 loading were potted in a clear epoxy polymer, sectioned and polished and examined using transmission and reflection light microscopy. There were only occasional fibers bridging the mode 2 cracks. These cracks were not always visible probably because the crack opening displacement was too small as to be resolved using light microscopy. A study was made of the effect of repetitive impacts on laminates of AS4/3501-6 and IM6/3501-6. Plots of cumulative impact energy vs cumulative absorbed energy exhibited a sharp change in slope which corresponded to the damage area reaching the edges of the specimen. The initial slope was highly reproducible for both composite materials. On the other hand, the intersection point between the two slopes, where the damage area reaches the specimen edges, was highly variable between specimens. This variability is tentatively ascribed to differences in laminate quality.

Source record↗
NASA NTRS1988

Eruptive viscosity and volcano morphology

Terrestrial central volcanoes formed predominantly from lava flows were classified as shields, stratovolcanoes, and domes. Shield volcanoes tend to be large in areal extent, have convex slopes, and are characterized by their resemblance to inverted hellenic war shields. Stratovolcanoes have concave slopes, whereas domes are smaller and have gentle convex slopes near the vent that increase near the perimeter. In addition to these differences in morphology, several other variations were observed. The most important is composition: shield volcanoes tend to be basaltic, stratovolcanoes tend to be andesitic, and domes tend to be dacitic. However, important exceptions include Fuji, Pico, Mayon, Izalco, and Fuego which have stratovolcano morphologies but are composed of basaltic lavas. Similarly, Ribkwo is a Kenyan shield volcano composed of trachyte and Suswa and Kilombe are shields composed of phonolite. These exceptions indicate that eruptive conditions, rather than composition, may be the primary factors that determine volcano morphology. The objective of this study is to determine the relationships, if any, between eruptive conditions (viscosity, erupted volume, and effusion rate) and effusive volcano morphology. Moreover, it is the goal of this study to incorporate these relationships into a model to predict the eruptive conditions of extraterrestrial (Martian) volcanoes based on their morphology.

Posin, Seth B.↗
NASA NTRS1988

Response to soil moisture of spectral indexes derived from bidirectional reflectance in Thematic Mapper wavebands

Laboratory reflectance measurements of 10 soils were used to determine the relationship between soil moisture and three spectral indices: the TM5/7 ratio and the Wetness(R) and Brightness(R) features of the reflectance factor TM Tasseled Cap transformation. Response of the indices to dry mass water percentage was approximately linear for individual soils, except for Wetness(R) and Brightness(R) at high moisture content. Soil differences in the slopes of the Wetness(R)- and Brightness(R)-moisture content relationships were almost entirely eliminated by expressing water content as the percentage of water retained at 0.1 bar (10 kPa) tension (relative water content). The resultant soil lines were offset from one another by the differences in dry soil index value. Slope of the TM5/7 response was not completely normalized by expressing moisture status as relative water content, because slope appeared to vary with dry soil ratio value. Sensitivity to the effects of illumination angle was negligible for the TM5/7 ratio, somewhat greater for Wetness(R) and greatest for Brightness(R).

Musick, H. Brad↗
NASA NTRS1988

Optimization and guidance of penetration landing trajectories in a windshear

The optimization and guidance of penetration landing trajectories in a windshear are considered. It is assumed that the aircraft is controlled by the angle of attack and the power setting. For the optimal trajectory, the performance index being minimized measures the deviation of the flight trajectory from the nominal trajectory. In turn, the nominal trajectory includes two parts: the approach part (nominal glide slope constant) and the flare part (nominal glide slope varying linearly with the horizontal distance). Numerical results show that the optimal trajectory deviates somewhat from the nominal trajectory in the shear region. A guidance scheme is developed to approximate the optimal trajectory. The angle of attack is determined by the windshear intensity, the absolute path inclination, and the glide slope angle, while the power setting is determined by the windshear intensity and the velocity. Numerical results indicate that the guidance trajectory is close to the optimal trajectory.

Miele, A.↗
NASA NTRS1987

Improved silicon nitride for advanced heat engines

The technology base required to fabricate silicon nitride components with the strength, reliability, and reproducibility necessary for actual heat engine applications is presented. Task 2 was set up to develop test bars with high Weibull slope and greater high temperature strength, and to conduct an initial net shape component fabrication evaluation. Screening experiments were performed in Task 7 on advanced materials and processing for input to Task 2. The technical efforts performed in the second year of a 5-yr program are covered. The first iteration of Task 2 was completed as planned. Two half-replicated, fractional factorial (2 sup 5), statistically designed matrix experiments were conducted. These experiments have identified Denka 9FW Si3N4 as an alternate raw material to GTE SN502 Si3N4 for subsequent process evaluation. A detailed statistical analysis was conducted to correlate processing conditions with as-processed test bar properties. One processing condition produced a material with a 97 ksi average room temperature MOR (100 percent of goal) with 13.2 Weibull slope (83 percent of goal); another condition produced 86 ksi (6 percent over baseline) room temperature strength with a Weibull slope of 20 (125 percent of goal).

Yeh, Hun C.↗
NASA NTRS1988

Comparison of measured and predicted sea surface spectra of short waves

Reliable sea surface slope time series, using a laseroptical receiver system deployed on a wave follower, are analyzed to yield slope frequency spectra of the ocean surface up to 300 Hz. The results show significant differences when compared with the Pierson and Stacy (1973) model. An epirical model is proposed in this paper that is consistent with the observed slope spectra. The newly proposed model is compared with other more recently advanced shortwave spectral models.

Shemdin, O. H.↗
NASA NTRS1989

The first UV spectrum of Triton - IUE observations from 2600 to 3200 A

The results of the first observations of Triton's spectrum below 3300 A are reported. Triton's 2700 A geometric albedo is found to be 0.28 + or - 0.04. The albedo increases monotonically from 2600 to 3200 A, with a slope of 0.13 + or - 0.03 per 1000 A. This positive slope is qualitatively similar to, but shallower than, Triton's visible albedo slope and argues against a strong Rayleigh scattering signature. Triton's integrated flux is found to be 1.5 times Pluto's, indicating Triton to be either more reflective in the UV, or bigger, or both. The redness of Triton's visible and UV colors argues against an extremely bright surface and for a larger radius than Pluto's. A lower limit on the radius of 1240 + or - 90 km is derived. The spectrum observed by IUE is consistent with either an icy surface or a suspended aerosol layer which preferentially absorbs UV light.

Stern, S. Alan↗
NASA NTRS1989

Evidence for volcanism in NW Ishtar Terra, Venus

Venera 15/16 radar data for an area in NW Ishtar Terra, Venus, show an area with moderate radar return and a smooth textured surface which embays low lying areas of the surrounding mountainous terrain. Although this unit may be an extension of the lava plains of Lakshmi Planum to the southeast, detailed study suggests a separate volcanic center in NW Ishtar Terra. Lakshmi Planum, on the Ishtar Terra highland, exhibits major volcanic and tectonic features. On the Venera radar image radar brightness is influenced by slope and roughness; radar-facing slopes (east-facing) and rough surfaces (approx. 8 cm average relief) are bright, while west-facing slopes and smooth surfaces are dark. A series of semi-circular features, apparently topographic depressions, do not conform in orientation to major structural trends in this region of NW Ishtar Terra. The large depression in NW Ishtar Terra is similar to the calderas of Colette and Sacajawea Paterae, as all three structures are large irregular depressions. NW Ishtar Terra appears to be the site of a volcanic center with a complex caldera structure, possibly more than one eruptive vent, and associated lobed flows at lower elevations. The morphologic similarity between this volcanic center and those of Colette and Sacajawea suggests that centralized eruptions have been the dominant form of volcanism in Ishtar. The location of this volcanic center at the intersection of two major compressional mountain belts and the large size of the calders (with an inferred larg/deep magma source) support a crustal thickening/melting rather than a hot-spot origin for these magmas.

Gaddis, L.↗
NASA NTRS1989

Solid-state lasers for the mid-infrared region

Developmental results for solid-state lasers for the mid-IR region are reviewed. Good slope efficiency and reasonable thresholds have been demonstrated for multiply doped mid-IR lasers. Laser efficiency increases as the operating temperature is decreased, due to both reduced threshold and a higher slope efficiency. Good slope efficiencies have been achieved even at room temperature. While Q-switching has been demonstrated at room temperature, it is not nearly as efficient as it is at reduced temperatures.

Barnes, Norman P.↗
NASA NTRS1990

Wave number spectra from temperature-humidity infrared radiometer 6.7-micron water vapor data

Wave number spectra from Nimbus 7 temperature-humidity infrared radiometer 6.7-micron water vapor data are analyzed using series 4800 km long, in regions free of high clouds and frontal zones. In these regions, the brightness temperatures approximate temperatures on a water vapor isosteric (constant density) surface, rather than averages over a broad vertical layer. Power above the noise can be extracted down to wavelengths of about 60 km. Fitting the power spectrum versus horizontal wave number k to a k to the -nth power law for wavelengths from 60 to a few hundred kilometers gives slopes of n = 2.7 to 3.0, depending on the exact wave numbers that are fitted. Thunderstorms and convective cloud systems may constitute an energy source for the reverse energy cascade which produces a -5/3 spectral slope. The results suggest that when these features are not present, the enstrophy-cascading process that gives a -3 slope may govern the motion at scales smaller than it has heretofore been observed.

Manney, Gloria L.↗
NASA NTRS1990

High-resolution topography and albedo of the South Polar layered deposits on Mars

Using a new photoclinometric technique with high-resolution Mariner 9 images, maximum slopes of 10 - 20 deg are found to occur on an exposure of layered deposits within the south polar residual cap of Mars. Stereophotogrammetry is used to constrain the photoclinometric solutions, which resolve layer thicknesses of 100-300 m. Albedo variations are correlated with slope, indicating that frost is present on level areas. There is evidence for temporal changes in frost distribution in the seven days between the to images used in this study. The magnitude of the slopes derived here and consideration of the stability of water ice at the surface of the layered deposits strongly suggest the presence of a competent weathering rind. The weathered surface may be composed of dark filamentary sublimation residue particles that protect the underlying ice from solar heating. This hypothesis is consistent with previous studies of the regional color and albedo of the layered deposits, which indicate that the deposits are slightly darker and less red than the bright dust that mantles much of the south polar region. Furthermore, the proposed weathering mechanism provides a plausible source of dark, saltating material for the Martian polar dune fields.

Herkenhoff, Ken E.↗
NASA NTRS1990

A radar-echo model for Mars

Researchers developed a radar-echo model for Mars based on 12.6 cm continuous wave radio transmissions backscattered from the planet. The model broadly matches the variations in depolarized and polarized total radar cross sections with longitude observed by Goldstone in 1986 along 7 degrees S. and yields echo spectra that are generally similiar to the observed spectra. Radar map units in the model include an extensive cratered uplands unit with weak depolarized echo cross sections, average thermal inertias, moderate normal refelectivities, and moderate rms slopes; the volcanic units of Tharsis, Elysium, and Amazonis regions with strong depolarized echo cross sections, low thermal inertia, low normal reflectivities, and large rms slopes; and the northern planes units with moderate to strong depolarized echo cross sections, moderate to very high thermal inertias, moderate to large normal reflectivities, and moderate rms slopes. The relevance of the model to the interpretation of radar echoes from Mars is discussed.

Thompson, T. W.↗
NASA NTRS1991

Near-infrared observations of primitive asteroids and a possible extinct comet

Photometry was obtained simultaneously in the near-infrared and in the visible, of several D-type asteroids, thought to be composed of the most primordial material in the asteroid belt. These objects have been previously classified as D-type based on their low albedo and broadband colors in the visible region of the spectrum. One of the objects observed is 944 Hidalgo, which is possibly an extinct comet, based on its orbital elements. The photometry further constrains the surface mineralogy and is a test of whether differences exist between these objects in different regions of the asteroid belt. Refining the knowledge of the surface composition of these objects will allow a better measure of the amount of thermal processing which has taken place in these so-called primitive asteroids. Spectral slope is assumed to be sensitive to surface composition. There is some variability in spectral slope among those objects classified as D-type, with indications of increasing slope into the near-infrared with heliocentric distance. The spectral features are quite subtle as expected for these low albedo objects, but there is possible evidence of subtle features in some of the D-type asteroids and possibly some active comets. Further analysis of these spectra and the implications for the outer region of the asteroid belt is presented.

Howell, E. S.↗
NASA NTRS1991

Have graben wall scarps accumulated sand and dust on Mars?

Grabens are linear fault bounded troughs that are extremely abundant on Mars (about 7000 cover the Western Hemisphere). Analysis of lunar and Martian grabens as well as analogous structures on Earth indicates that grabens form under extension when the crust is pulled apart. On Mars, topographic maps are not of sufficient resolution to measure graben wall slopes. Seismic shaking on Mars might be capable of reducing 60 deg fault scarps to an angle of repose. Some other process must be responsible for further reducing graben wall slopes. If the deposition of sand and dust along graben walls is responsible for their extremely low slopes, then a variety of implications are possible. Sand and/or dust movement and deposition is ubiquitous in grabens over most of Mars, as similar looking grabens are found over the entire Western Hemisphere and this requires a plentiful supply of sand or dust. If the material that accumulates is of low density and cohesion, attempts to traverse graben walls might be difficult. Rimless shallow depressions could be more effective sinks for sand and dust on Mars than has been realized.

Golombek, M. P.↗
NASA NTRS1989

Development of flashlamp-pumped Q-switched Ho:Tm:Cr:YAG lasers for mid-infrared LIDAR application

A flashlamp-pumped 2.1 micron Ho:Tm:Cr:YAG laser was studied for both normal mode and Q-switched operations under a wide variety of experimental conditions in order to optimize performance. Laser output energy, slope efficiency, threshold and pulselength were determined as a function of operating temperature, output mirror reflectivity, input electrical energy and Q-switch opening time. The measured normal-mode laser thresholds of a Ho(3+) (0.45 atomic percent):Tm(3+) (2.5 atomic percent):Cr(3+) (0.8 atomic percent):YAG crystal ranged form 26 to 50 J between 120 and 200 K with slope efficiencies up to 0.36 percent with a 60 percent reflective output mirror. Under Q-switched operation the slope efficiency was 90 percent of the normal-mode result. Development of solid state lasers with Ho(3+), Tm(3+) and/or Er(3+) doped crystals has been pursued by NASA for eye-dafe mid-infrared LIDAR (light detection and ranging) application. As a part of the project, the authors have been working on evaluating Ho(3+):Tm(3+):Cr(3+):YAG crystals for normal-mode and Q-switched 2.1 micron laser operations in order to determine an optimum Tm(3+) concentration under flashlamp pumping conditions. Lasing properties of the Ho(3+) in the mid-infrared region have been studied by many research groups since the early 1960's. However, the technology of those lasers is still premature for lidar application. In order to overcome the inefficiency related to narrow absorption bands of the Ho(3+), Tm(3+) and Er(3+), the erbium has been replaced by chromium. The improvement in flashlamp-pumped Ho(3+) laser efficiency has been demonstrated recently by several research groups by utilizing the broad absorption spectrum of Cr(3+) which covers the flashlamp's emission spectrum. Efficient energy transfer to the Tm(3+) and then the Ho(3+) occurs subsequently. It is known that high Tm(3+) concentration and low Ho(3+) concentration are preferred to achieve a quantum efficiency approaching two and to avoid large reabsorption losses. However, determination of the optimum Tm(3+) concentration required to ensure efficient energy transfer from Cr(3+) to Tm(3+) and from Tm(3+) to Ho(3+) has not been made in the Ho:Tm:CR:YAG crystal. The results obtained so far are given.

Choi, Young S.↗
NASA NTRS1989

Basic properties of developed wind waves and their influence on microwave remote sensing signatures

Error trends in wind speed measurements by satellite scatterometer altimeter and microwave radiometer are shown to be correlated with the degree of wave development. These errors are analyzed theoretically by studying the rms wave slope which, directly or indirectly, affects all microwave signatures. For equilibrium sea state, the influence of spectrum parameters on the wave slope is reviewed. In well-developed seas, the dominant wavelength is shown to have no effect on the slope. Temporal-spatial rates of steep and breaking waves are derived and compared with field observations. The inner scale that determines a rapid falloff of spectral density function at high frequencies is estimated. The dependence of the spectral parameters on wind speed and sea maturity is studied using NOAA buoy observations. It is concluded that the removal of environmental error trends from satellite measurements can be best accomplished by a joint processing of microwave returns from several independent instruments.

Glazman, Roman E.↗
NASA NTRS1990

Rough surface scattering results based on bandpass autocorrelation forms

Surface-height autocorrelation forms such as Gaussian and exponential are often used in studies of near-normal incidence rough-surface scattering. Such models require the existence of a constant, or DC, value in the spectrum. The consequences of autocorrelation forms that correspond to spectral processes that are essentially bandpass in nature are examined. One such process is that of ocean wind waves. In this case, the spectral components do not extend down to zero frequency. The physical optics backscatter theory is reexamined relative to such autocorrelation functions. Experimental results obtained from a wavetank are compared to the autocorrelation model used in the analysis. The analysis indicates that Gaussian correlation length or mean-square slope is not an appropriate parameter for narrowband conditions and that significant slope is a more relevant parameter. Inherent in the deep-phase assumption is some form of slope dependency. The analysis given (and variants thereof) can be used to provide insight into the physical effects of separate spectral components and of spectral directionality.

Miller, Lee S.↗