Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “simulation code”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Computer simulation of auroral kilometric radiation

An investigation is carried out of the linear amplification and nonlinear saturation of electromagnetic waves associated with two components of electrons consisting of a cold Maxwellian background and a weakly relativistic population of electrons possessing a loss-cone distribution. The goal is to understand the mechanism responsible for the production of auroral kilometric radiation (AKR). A relativistic 1-2/2 dimensional electromagnetic particle simulation code is used in studying an initial value problem modeling the AKR source region. The simulation makes it possible to follow the growth of all modes of radiation, including the ordinary mode (O-mode), slow extraordinary mode (Z-mode), whistler mode and fast extraordinary mode (X-mode), past the point of saturation.

Wagner, J. S.↗

Dynamics of Unusual Debris Flows on Martian Sand Dunes

Gullies that dissect sand dunes in Russell impact crater often display debris flow-like deposits in their distal reaches. The possible range of both the rheological properties and the flow rates are estimated using a numerical simulation code of a Bingham plastic flow to help explain the formation of these features. Our simulated results are best explained by a rapid debris flow. For example, a debris flow with the viscosity of 10(exp 2) Pa s and the yield strength of 10(exp 2) Pa can form the observed deposits with a flow rate of 0.5 cu m/s sustained over several minutes and total discharged water volume on the order of hundreds of cubic meters, which may be produced by melting a surface layer of interstitial ice within the dune deposits to several centimeters depth.

Miyamoto, Hideaki↗

Imposing a Lagrangian Particle Framework on an Eulerian Hydrodynamics Infrastructure in Flash

In many astrophysical simulations, both Eulerian and Lagrangian quantities are of interest. For example, in a galaxy cluster merger simulation, the intracluster gas can have Eulerian discretization, while dark matter can be modeled using particles. FLASH, a component-based scientific simulation code, superimposes a Lagrangian framework atop an adaptive mesh refinement Eulerian framework to enable such simulations. The discretization of the field variables is Eulerian, while the Lagrangian entities occur in many different forms including tracer particles, massive particles, charged particles in particle-in-cell mode, and Lagrangian markers to model fluid structure interactions. These widely varying roles for Lagrangian entities are possible because of the highly modular, flexible, and extensible architecture of the Lagrangian framework. In this paper, we describe the Lagrangian framework in FLASH in the context of two very different applications, Type Ia supernovae and galaxy cluster mergers, which use the Lagrangian entities in fundamentally different ways.

Dubey, A.↗

RAVEN, a New Software for Dynamic Risk Analysis

RAVEN is a generic software driver to perform parametric and probabilistic analysis of code simulating complex systems. Initially developed to provide dynamic risk analysis capabilities to the RELAP-7 code [1] is currently being generalized with the addition of Application Programming Interfaces (APIs). These interfaces are used to extend RAVEN capabilities to any software as long as all the parameters that need to be perturbed are accessible by inputs files or directly via python interfaces. RAVEN is capable to investigate the system response probing the input space using Monte Carlo, grid strategies, or Latin Hyper Cube schemes, but its strength is its focus toward system feature discovery like limit surfaces separating regions of the input space leading to system failure using dynamic supervised learning techniques. The paper will present an overview of the software capabilities and their implementation schemes followed by same application examples.

97 MATHEMATICS AND COMPUTING↗

Mesh generation for confined fusion plasma simulation

XGC1 and M3D-C 1 are two fusion plasma simulation codes being developed at Princeton Plasma Physics Laboratory. XGC1 uses the particle-in-cell method to simulate gyrokinetic neoclassical physics and turbulence. M3D-C 1 solves the two-fluid resistive magnetohydrodynamic equations with the C 1 finite elements. This paper presents the software tools and libraries that were combined to form the geometry and automatic meshing procedures for these codes. Finally, specific consideration has been given to satisfy the mesh configuration and element shape quality constraints of XGC1 and M3D-C 1 .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of applied magnetic field magnetoplasmadynamic thrusters with particle-in-cell code with Monte Carlo collision. I. Computation methods and physical processes

A two-dimensional axisymmetric electromagnetic particle-in-cell code with Monte Carlo collision conditions has been developed for an applied-field magnetoplasmadynamic thruster simulation. This theoretical approach establishes a particle acceleration model to investigate the microscopic and macroscopic characteristics of particles. This new simulation code was used to study the physical processes associated with applied magnetic fields. In this paper (I), detail of the computation procedure and results of predictions of local plasma and field properties are presented. The numerical model was applied to the configuration of a NASA Lewis Research Center 100-kW magnetoplasmadynamic thruster which has well documented experimental results. The applied magnetic field strength was varied from 0 to 0.12 T, and the effects on thrust were calculated as a basis for verification of the theoretical approach. With this confirmation, the changes in the distributions of ion density, velocity, and temperature throughout the acceleration region related to the applied magnetic fields were investigated. Using these results, the effects of applied field on physical processes in the thruster discharge region could be represented in detail, and those results are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High Resolution Aerospace Applications using the NASA Columbia Supercomputer

This paper focuses on the parallel performance of two high-performance aerodynamic simulation packages on the newly installed NASA Columbia supercomputer. These packages include both a high-fidelity, unstructured, Reynolds-averaged Navier-Stokes solver, and a fully-automated inviscid flow package for cut-cell Cartesian grids. The complementary combination of these two simulation codes enables high-fidelity characterization of aerospace vehicle design performance over the entire flight envelope through extensive parametric analysis and detailed simulation of critical regions of the flight envelope. Both packages. are industrial-level codes designed for complex geometry and incorpor.ats. CuStomized multigrid solution algorithms. The performance of these codes on Columbia is examined using both MPI and OpenMP and using both the NUMAlink and InfiniBand interconnect fabrics. Numerical results demonstrate good scalability on up to 2016 CPUs using the NUMAIink4 interconnect, with measured computational rates in the vicinity of 3 TFLOP/s, while InfiniBand showed some performance degradation at high CPU counts, particularly with multigrid. Nonetheless, the results are encouraging enough to indicate that larger test cases using combined MPI/OpenMP communication should scale well on even more processors.

Mavriplis, Dimitri J.↗

Self-consistent simulation of transport and turbulence in tokamak edge plasma by coupling SOLPS-ITER and BOUT++

The status of coupling the fluid plasma/neutral 2D transport code SOLPS-ITER and the fluid 3D turbulence code BOUT++ is reported. Both codes simulated the same region, which is from several cm inside the magnetic separatrix to the far scrape-off layer (SOL). Compared to the profile evolution time scale, the characteristic time scale of the turbulence is quite short. For the turbulence code BOUT++, the time scale is around 10 -6 s. However, for the transport code SOLPS-ITER, the time scale is around 10 -3 –10 -2 s. An iterative scheme is used that each system is evolved on its own characteristic time scale. SOLPS-ITER can provide the background profiles of density, ion, and electron temperature to BOUT++. In turn, BOUT++ can provide the corresponding radial transport coefficients to SOLPS-ITER. The coupling has involved the ion density, ion temperature, and electron temperature. After several steps of iteration, the profiles of density, ion, and electron temperature show fluctuations, and the differences of the changes between two consecutive profiles are getting smaller and smaller. Finally, the self-consistent solutions of turbulence and transport can be obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Linear gyrokinetic simulation of high-n toroidal Alfven eigenmodes in a burning plasma

A hybrid gyrokinetic ions/massless fluid electron model is used to study the stability of high-n toroidal Alfven eigenmodes (TAEs) in ITER [M. Shimada et al., Nucl. Fusion 47, S1 (2007)]. The hybrid model has been implemented in the particle-in-cell turbulence simulation code GEM [Y. Chen and S. E. Parker, J. Comput. Phys. 220, 839 (2007)]. The adequacy of the hybrid model for simulating TAEs has been previously demonstrated [J. Lang et al., Phys. Plasmas 16, 102101 (2009)] by comparing the simulated TAE mode frequency and structure with an eigenmode analysis, and the thermal ion kinetic damping effect with analytic theory. By using a global particle-in-cell code the effects of large orbit width and nonlocal mode structures can be accurately included. Damping rate due to numerical filtering is carefully monitored, and convergence with respect to particle number, grid resolution, etc., is thoroughly tested. The simulations show that the most unstable modes in ITER lie in the rage of 10<n<20. Thermal ion pressure effect and alpha particle nonperturbative effect are important in determining the mode radial location and stability threshold. The thermal ion Landau damping rate and radiative damping rate from the simulations are compared with analytical estimates. The thermal ion Landau damping is the dominant damping mechanism. Plasma elongation has a strong stabilizing effect on the alpha driven TAEs. The central alpha particle pressure threshold for the most unstable n=15 mode is about {beta}{sub {alpha}(0)}=0.7% for the fully shaped ITER equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulation study of wakefield generation by two color laser pulses propagating in homogeneous plasma

This paper deals with a two-dimensional simulation of electric wakefields generated by two color laser pulses propagating in homogeneous plasma, using VORPAL simulation code. The laser pulses are assumed to have a frequency difference equal to the plasma frequency. Simulation studies are performed for two similarly as well as oppositely polarized laser pulses and the respective amplitudes of the generated longitudinal wakefields for the two cases are compared. Enhancement of wake amplitude for the latter case is reported. This simulation study validates the analytical results presented by Jha et al.[Phys. Plasmas 20, 053102 (2013)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CASL VMA FY16 Milestone Report (L3:VMA.VUQ.P13.07) Westinghouse Mixing with COBRA-TF

COBRA-TF (CTF) is a low-resolution code currently maintained as CASL's subchannel analysis tool. CTF operates as a two-phase, compressible code over a mesh comprised of subchannels and axial discretized nodes. In part because CTF is a low-resolution code, simulation run time is not computationally expensive, only on the order of minutes. Hi-resolution codes such as STAR-CCM+ can be used to train lower-fidelity codes such as CTF. Unlike STAR-CCM+, CTF has no turbulence model, only a two-phase turbulent mixing coefficient, β. β can be set to a constant value or calculated in terms of Reynolds number using an empirical correlation. Results from STAR-CCM+ can be used to inform the appropriate value of β. Once β is calibrated, CTF runs can be an inexpensive alternative to costly STAR-CCM+ runs for scoping analyses. Based on the results of CTF runs, STAR-CCM+ can be run for specific parameters of interest. CASL areas of application are CIPS for single phase analysis and DNB-CTF for two-phase analysis.

97 MATHEMATICS AND COMPUTING↗

Simulating Muon Capture with MARLEY

Core-collapse supernovae are intense sources of tens-of-MeV neutrinos. Each explosion releases about 1058 neutrinos in a burst lasting tens of seconds. As neutrinos are weakly interacting, they escape more easily compared to photons, allowing them to be observed before the light signal. Understanding low-energy neutrino interactions with argon will be critical for future supernova measurements with the Deep Underground Neutrino Experiment (DUNE). Interpreting future DUNE supernova neutrino data will require a high-quality model of O(10 MeV) neutrino interactions, but the dominant charged-current cross section has never been measured at these low energies for an argon target. We exploit the theoretical similarities between muon capture, which has been measured, and antineutrino scattering to test MARLEY (Model of Argon Reaction Low Energy Yields), the simulation code used by DUNE to model supernova neutrino reactions. I implemented C++ code to add a muon capture mode to MARLEY and compared the predictions of the new simulation to measured isotope branching ratios of the residual nuclei. The preliminary branching ratios predicted by MARLEY running in muon capture mode demonstrate promising baseline performance when compared to experimental data and are expected to improve with further model adjustments.

Wong, Baker Louie↗

Bayesian Calibration of Inertial Confinement Fusion Models with Very Expensive Data

Calibrating computer simulations against experimental data is a ubiquitous problem in science and is particularly difficult when experimental data are expensive or diffi- cult to collect. In inertial confinement fusion experiments, where a single data point can cost 10 5 –10 6 USD, calibration of large-scale design calculations is particularly challenging. We present a framework that aims to provide calibrated predictions far from the available data that can be trained using a small number of data points. The approach aims to retain as much of the physics (summarized by the simulation code) as possible and is based on a truncated polynomial chaos expansion in the space of simulation inputs, augmented with a non-parametric correction for higher distribution modes. Due to the difficulty of the problem, understanding the sources of uncertainty in the model is essential; we demonstrate this through an application of our approach to a series of 6 experimental laser shots. As a result, we validate our approach, show that the uncertainties in our predictions of experimental performance are dominated by shot-shot fluctuations and regression uncertainties, and discuss paths towards an improved prediction model.

97 MATHEMATICS AND COMPUTING↗

A comparative simulation study of coupled THM processes and their effect on fractured rock permeability around nuclear waste repositories

This paper presents an international, multiple-code, simulation study of coupled thermal, hydrological, and mechanical (THM) processes and their effect on permeability and fluid flow in fractured rock around heated underground nuclear waste emplacement drifts. Simulations were conducted considering two types of repository settings: (a) open emplacement drifts in relatively shallow unsaturated volcanic rock, and (b) backfilled emplacement drifts in deeper saturated crystalline rock. The results showed that for the two assumed repository settings, the dominant mechanism of changes in rock permeability was thermal-mechanically-induced closure (reduced aperture) of vertical fractures, caused by thermal stress resulting from repository-wide heating of the rock mass. The magnitude of thermal-mechanically-induced changes in permeability was more substantial in the case of an emplacement drift located in a relatively shallow, low-stress environment where the rock is more compliant, allowing more substantial fracture closure during thermal stressing. However, in both of the assumed repository settings in this study, the thermal-mechanically-induced changes in permeability caused relatively small changes in the flow field, with most changes occurring in the vicinity of the emplacement drifts.

54 ENVIRONMENTAL SCIENCES↗

Validation of gyrokinetic simulations with measurements of electron temperature fluctuations and density-temperature phase angles on ASDEX Upgrade

Measurements of turbulent electron temperature fluctuation amplitudes, $δT_e⊥/T_e$, frequency spectra, and radial correlation lengths, $L_r(T_{e⊥}$), have been performed at ASDEX Upgrade using a newly upgraded Correlation ECE diagnostic in the range of scales $k_⊥<1.4 cm^{-1}, k_r < 3.5 cm^{-1} (k_⊥ρ_s < 0.28$ and $k_rρ_s < 0.7$). The phase angle between turbulent temperature and density fluctuations, α nT , has also been measured by using an ECE radiometer coupled to a reflectometer along the same line of sight. These quantities are used simultaneously to constrain a set of ion-scale non-linear gyrokinetic turbulence simulations of the outer core ( ρ tor = 0.75) of a low density, electron heated L-mode plasma, performed using the gyrokinetic simulation code, GENE. The ion and electron temperature gradients were scanned within uncertainties. It is found that gyrokinetic simulations are able to match simultaneously the electron and ion heat flux at this radius within the experimental uncertainties. The simulations were performed based on a reference discharge for which $δT_{e⊥}/T_e$ measurements were available, and $L_r(T_{e⊥}$) and α nT were then predicted using synthetic diagnostics prior to measurements in a repeat discharge. While temperature fluctuation amplitudes are overestimated by >50% for all simulations within the sensitivity scans performed, good quantitative agreement is found for $L_r(T_{e⊥}$) and α nT . Finally, a validation metric is used to quantify the level of agreement of individual simulations with experimental measurements, and the best agreement is found close to the experimental gradient values.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Inertial Confinement Fusion Design Search Using Bayesian Optimization

Inertial confinement fusion (ICF) experiments rely on complex multi-physics simulation codes such as the Lawrence Livermore National Laboratory-developed HYDRA to guide design work. However, these simulations have several dozen tunable parameters and can be computationally expensive. This makes searching the parameter space challenging and time-consuming. Recently developed automated tools utilize Bayesian optimization to search these high-dimensional parameter spaces for optimal designs. The optimization tools run 2D integrated simulations in HYDRA to converge on a design that produces specified scalar or vector outputs. In this paper, we apply the Bayesian optimization tools to two common tuning scenarios. First, we tune simulation inputs to match measurements of a well-characterized experiment at the National Ignition Facility. This type of tuning is commonly performed to compensate for the use of simplified simulation settings (e.g. reduced resolution) or to account for missing physics in the simulations. Second, we search for an ICF simulation design that has a particular radiation drive profile. These optimizations replicate the kinds of tuning researchers routinely perform, but do so with significantly reduced manual effort. This approach demonstrates a powerful and efficient pathway toward autonomous, high-fidelity design optimization for future ICF experiments.

Bayesian optimization↗

An Iterative Soft-Decision Decoding Algorithm

This paper presents a new minimum-weight trellis-based soft-decision iterative decoding algorithm for binary linear block codes. Simulation results for the RM(64,22), EBCH(64,24), RM(64,42) and EBCH(64,45) codes show that the proposed decoding algorithm achieves practically (or near) optimal error performance with significant reduction in decoding computational complexity. The average number of search iterations is also small even for low signal-to-noise ratio.

Lin, Shu↗

A Magnetohydrodynamic Boost for Relativistic Jets

We have performed relativistic magnetohydrodynamic simulations of the hydrodynamic boosting mechanism for relativistic jets explored by Aloy & Rezzolla (2006) using the RAISHIN code. Simulation results show that the presence of a magnetic field may change the properties of the shock interface between the tenuous, overpressured jet (V(sub j) (sup z)) flowing tangentially to a dense external medium. Magnetic fields can lead to more efficient acceleration of the jet, in comparison to the pure-hydrodynamic case. A poloidal magnetic field (B(sup z)), tangent to the interface and parallel to the jet flow, produces both a stronger outward moving shock and inward moving rarefaction wave. This leads to a large velocity component normal to the interface in addition to acceleration tangent to the interface, and the jet is thus accelerated to a larger Lorentz factors than those obtained in the pure-hydrodynamic case. In contrast, a strong toroidal magnetic field (B(sup y)), tangent to the interface but perpendicular to the jet flow, also leads to stronger acceleration tangent to the shock interface relative to the pure-hydrodynamic case, but to a lesser extent than found for the poloidal case due to the fact that the velocity component normal to the shock interface is now much smaller. Overall, the acceleration efficiency in the toroidal case is less than that of the poloidal case but both geometries still result in higher Lorentz factors than the pure-hydrodynamic case. Thus, the presence and relative orientation of a magnetic field in relativistic jets can have a significant influence on the hydrodynamic boost mechanism studied by Aloy & Rezzolla (2006).

Mizuno, Yosuke↗