Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shallow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Sea–Level Rise Impacts on Tidal Marshes and Estuarine Biogeochemical Processes

We used a numerical model to investigate the effects of sea-level rise (SLR) on the biogeochemical processes in the York River Estuary with extensive tidal marshes. The fully-coupled hydrodynamic-water quality-marsh model accounts for the spatial and temporal variations of physical-biogeochemical interactions between the tidal marshes and surrounding waters. This study focuses on an SLR scenario where the vertical accretion of tidal marshes keeps pace with the rising sea levels. Results show that SLR amplifies the tidal range and prolongs flooding duration, which results in enhanced porewater exchanges of materials between the tidal marshes and the surrounding waters. The increased availability of shallow-water habitats and enhanced light utilization in the shallow areas under SLR promote phytoplankton production (PP) in the shallow-water regions of the York River. Consequently, the organic carbon in the open water is fueled by the contributions from shallow waters and the enhanced export of organic carbon from the marshes. The change in the dissolved oxygen (DO) budget in the York River Estuary is attributed to changes in water column respiration, net metabolism of the benthic layer, reaeration, PP, and increased stratification under SLR. The net DO flux out of the York River increases at the York River mouth. Diel DO variation, especially in the marshes in the upper estuary, promotes phosphorus release from the sediment. The changes in dissolved nitrogen under SLR are relatively minimal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Hydrology Outweighs Temperature in Driving Production and Export of Dissolved Carbon in a Snowy Mountain Catchment

Abstract Terrestrial production and export of dissolved organic and inorganic carbon (DOC and DIC) to streams depends on water flow and biogeochemical processes in and beneath soils. Yet, understanding of these processes in a rapidly changing climate is limited. Using the watershed‐scale reactive‐transport model BioRT‐HBV and stream data from a snow‐dominated catchment in the Rockies, we show deeper groundwater flow averaged about 20% of annual discharge, rising to ∼35% in drier years. DOC and DIC production and export peaked during snowmelt and wet years, driven more by hydrology than temperature. DOC was primarily produced in shallow soils (1.94 ± 1.45 gC/m 2 /year), stored via sorption, and flushed out during snowmelt. Some DOC was recharged to and further consumed in the deeper subsurface via respiration (−0.27 ± 0.02 gC/m 2 /year), therefore reducing concentrations in deeper groundwater and stream DOC concentrations at low discharge. Consequently, DOC was primarily exported from the shallow zone (1.62 ± 0.96 gC/m 2 /year, compared to 0.12 ± 0.02 gC/m 2 /year from the deeper zone). DIC was produced in both zones but at higher rates in shallow soils (1.34 ± 1.00 gC/m 2 /year) than in the deep subsurface (0.36 ± 0.02 gC/m 2 /year). Deep respiration elevated DIC concentrations in the deep zone and stream DIC concentrations at low discharge. In other words, deep respiration is responsible for the commonly‐observed increasing DOC concentrations (flushing) and decreasing DIC concentrations (dilution) with increasing discharge. DIC export from the shallow zone was ~66% of annual export but can drop to ∼53% in drier years. Numerical experiments suggest lower carbon production and export in a warmer, drier future, and a higher proportion from deeper flow and respiration processes. These results underscore the often‐overlooked but growing importance of deeper processes in a warming climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Evapotranspiration depletes groundwater under warming over the contiguous United States

A warmer climate increases evaporative demand. However, response to warming depends on water availability. Existing earth system models represent soil moisture but simplify groundwater connections, a primary control on soil moisture. Here we apply an integrated surface-groundwater hydrologic model to evaluate the sensitivity of shallow groundwater to warming across the majority of the US. We show that as warming shifts the balance between water supply and demand, shallow groundwater storage can buffer plant water stress; but only where shallow groundwater connections are present, and not indefinitely. As warming persists, storage can be depleted and connections lost. Similarly, in the arid western US warming does not result in significant groundwater changes because this area is already largely water limited. The direct response of shallow groundwater storage to warming demonstrates the strong and early effect that low to moderate warming may have on groundwater storage and evapotranspiration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Donor doping of corundum (Al x Ga 1- x ) 2 O 3

We report corundum (Al x Ga 1-x ) 2 O 3 alloys have been proposed as a candidate ultrawide-bandgap oxide for a number of applications, but doping is unexplored. We examine the prospects for n-type doping with H, Si, Ge, Sn, Hf, Zr, and Ta in corundum (Al x Ga 1-x ) 2 O 3 alloys using first-principles calculations. All of the dopants are shallow donors in corundum Ga 2 O 3 . In the (Al x Ga 1-x ) 2 O 3 alloy, they transition from shallow to deep donors at Al compositions that are unique to each donor. Si and Hf remain shallow donors up to the highest Al contents in corundum (Al x Ga 1-x ) 2 O 3 alloys and are still shallow even as the (Al x Ga 1-x ) 2 O 3 bandgap exceeds 6.5 eV. Finally, we address the detrimental role of cation vacancies as compensating deep acceptors and suggest that doping in a hydrogen-rich environment under cation-rich conditions can be used to overcome this problem.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Role of carbon and hydrogen in limiting n -type doping of monoclinic ( Al x Ga 1 – x ) 2 O 3

In this study, we use hybrid density functional calculations to assess n -type doping in monoclinic ( Al x Ga 1 – x ) 2 O 3 alloys. We focus on silicon, the most promising donor dopant, and study the structural properties, formation energies, and charge-state transition levels of its various configurations. We also explore the impact of carbon and hydrogen, which are common impurities in metal-organic chemical vapor deposition (MOCVD). In Ga 2 O 3 , Si Ga is an effective shallow donor, but in Al 2 O 3 Si Al acts as a DX center with a ( + / – ) transition level in the band gap. Interstitial hydrogen acts as a shallow donor in Ga 2 O 3 but behaves as a compensating acceptor in n -type Al 2 O 3 . Interpolation indicates that Si is an effective donor in ( Al x Ga 1 – x ) 2 O 3 up to 70% Al, but it can be compensated by hydrogen already at 1% Al. We also assess the diffusivity of hydrogen and study complex formation. Si cation – H complexes have relatively low binding energies. Substitutional carbon on a cation site acts as a shallow donor in Ga 2 O 3 , but can be stable in a negative charge state in ( Al x Ga 1 – x ) 2 O 3 when x > 5 % . Substitutional carbon on an oxygen site ( C O ) always acts as an acceptor in n -type ( Al x Ga 1 – x ) 2 O 3 , but will incorporate only under relatively oxygen-poor conditions. C O – H complexes can actually incorporate more easily, explaining observations of carbon-related compensation in Ga 2 O 3 grown by MOCVD. We also investigate C cation – H complexes, finding they have high binding energies and act as compensating acceptors when x > 56 % ; otherwise the hydrogen just passivates the unintentional carbon donors. C-H complex formation explains why MOCVD-grown Ga 2 O 3 can exhibit record-low free-carrier concentrations, in spite of the unavoidable incorporation of carbon. Our study highlights that, while Si is in principle a suitable shallow donor in ( Al x Ga 1 – x ) 2 O 3 alloys up to high Al compositions, control of unintentional impurities is essential to avoid compensation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Observed Covariations in Boundary Layer and Cumulus Cloud Layer Processes

In this paper we examine variations in boundary-layer processes spanning the shallow to deep cumulus transition. This is accomplished by differentiating boundary layer properties on the basis of convective outcomes, ranging from shallow to deep, as observed at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site in Oklahoma, USA. Doppler lidar, radar, and radiosonde data are combined to determine statistical differences in boundary layer and cloud layer properties using a large sample (236) of days with a range of convective outcomes: shallow, congestus, and deep convection. In these analyses, the radar characterizes diurnal cloud depth, the lidar quantifies updraft and downdraft properties in the subcloud layer, and daily radiosonde data provides the convective inhibition (CIN). Combined, these data are used to test the hypothesis that deep convection occurs when the strength of the boundary layer turbulence (i.e., TKE) exceeds the strength of the energy barrier (i.e., CIN) at the top of the CBL. Results show that days with deep convective clouds have significantly lower vertical velocity variance and weaker updrafts within the subcloud layer. However, CIN values are also found to be significantly lower on deep convective days, allowing for these weaker updrafts to penetrate the energy barrier and reach the level of free convection (LFC). In contrast, shallow convective outcomes occur when the updrafts are strong in an absolute sense, but are weak when compared to the strength of the energy barrier. These findings support the use of the CIN/TKE framework in parameterizing convection in coarse resolution models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Rayleigh Wave Propagation in the Bighorn Mountains Region, Wyoming

Short-period Rayleigh waves, Rg , provide strong constraints on the depth of shallow seismic events and are of interest for monitoring small explosions. Characterizing the seismic sources that generate Rg requires an understanding of how shallow crustal structure affects Rayleigh wave propagation. Here, in support of these efforts, this study utilizes observed waveforms from small shallow explosions recorded on temporary seismic network deployments in the Bighorn region, Wyoming. We study regional near-surface geology by measuring changes in surface-wave amplitude and polarization during propagation through basins, foothills, and mountains. We develop additional insight by carrying out surface-wave eigenfunction analyses and numerical-wave simulations, which together reproduce many characteristics seen in the observed waveforms. Our results show how sedimentary basins in the Bighorn region allow for amplified prograde-polarized higher-mode and retrograde-polarized fundamental-mode Rayleigh waves, whereas adjacent mountains only support retrograde motion. These different modes provide distinct constraints on the Earth structure and source characteristics, potentially enabling targeted inversions in future studies. Finally, our findings provide insight into Rg propagation through complex near-surface geology, improving our understanding of shallow propagation and source effects that are relevant to explosion monitoring efforts.

58 GEOSCIENCES↗
DOE OSTI2023

Recent Developments in Hydrogeologic Applications for Strain Tensor Analyses

Changes in fluid pressure deform porous media and this effect occurs in a variety of hydrogeologic processes, from the change in storage during pumping or injection to fluctuations in water levels caused by barometric pressure. We have developed instruments for measuring small strains in porous media, and we have used the resulting strain data to evaluate well testing, hydraulic fracturing, manual loading at the ground surface, and ambient hydrologic processes, like rainfall and evaporation. A particularly important application is the use of strain tensor data measured at shallow depths to analyze well tests or hydraulic fractures conducted at much greater depths. An early demonstration of this technique was conducted at the North Avant Field north of Tulsa, Oklahoma, where Pennsylvanian sandstone creates a confined aquifer and oil reservoir at a depth of 530m. We have showed that the strains caused by injecting into the aquifer could be measured at a depth of 30m and used to evaluate the properties of the aquifer. We recently expanded the array of strainmeters at the North Avant Field by deploying three more instruments at shallow depth (30m) along with a deep instrument at 520m depth in the winter, 2021. The deep instrument is deployed in shale caprock slightly above the aquifer. To our knowledge, the deep strainmeter at the North Avant Field is the deepest strainmeter ever deployed and this required refining methods originally developed for shallow deployments. The instrument was lowered to depth on oil field tubing and cemented in place using techniques and materials developed for use in oil wells. Optical fiber used to communicate with the instrument was cemented in the annulus on the outside of tubing. This is significant because the techniques we used could readily be extended to greater depth, suggesting that strainmeters can be deployed over a wide range of depths for monitoring critical subsurface processes. For example, it suggests that strainmeters could be deployed through the caprock to monitor for leaks from underlying CO2 storage reservoirs. The strainmeter array at the North Avant Field has been used to characterize deformation during a series of injection tests in the spring and summer, 2021. All the new strainmeters respond to pumping, and the strainmeters we installed earlier also responded. To our knowledge, this is the first application of well testing in a deep aquifer that was monitored by an array of strainmeters—our earlier work used strainmeters at a single location. We are currently analyzing the strain data using an analytical solution, a proxy-based Bayesian inversion algorithm, and other methods. Strainmeter data has also been used to characterize periodic pumping tests by us and Riley Blais. A periodically varying pumping rate causes both hydraulic head and strain signals that vary with the same period as the pumping. The peaks and troughs of the head in monitoring wells lag behind the peaks and troughs of the head in the pumping well, and this lag time increases with distance from the pumping well. The lag time of the pressure and the distance to the monitoring well can be used in a simple analysis to estimate the hydraulic diffusivity of the aquifer. The lag time determined from strain data can be used to estimate aquifer properties using the same analysis that works for the pressure only for strain data measured at particular locations. That is because the strain field in a confining unit advances upward, laterally and then downward even though the pressure in the underlying aquifer only advances laterally, according to our recent simulations. We have field data showing that a small periodic signal superimposed on an injection rate at the North Avant Field will create a periodic strain signal at shallow strainmeters. The field data and the recent simulations suggest that including a periodic component to injection or pumping and then monitoring the resulting strain signal could be a way to monitor the subsurface.

Murdoch, Larry↗
DOE OSTI2023

Recent Developments in Hydrogeologic Applications for Strain Tensor Analyses

Changes in fluid pressure deform porous media and this effect occurs in a variety of hydrogeologic processes, from the change in storage during pumping or injection to fluctuations in water levels caused by barometric pressure. We have developed instruments for measuring small strains in porous media, and we have used the resulting strain data to evaluate well testing, hydraulic fracturing, manual loading at the ground surface, and ambient hydrologic processes, like rainfall and evaporation. A particularly important application is the use of strain tensor data measured at shallow depths to analyze well tests or hydraulic fractures conducted at much greater depths. An early demonstration of this technique was conducted at the North Avant Field north of Tulsa, Oklahoma, where Pennsylvanian sandstone creates a confined aquifer and oil reservoir at a depth of 530m. We have showed that the strains caused by injecting into the aquifer could be measured at a depth of 30m and used to evaluate the properties of the aquifer. We recently expanded the array of strainmeters at the North Avant Field by deploying three more instruments at shallow depth (30m) along with a deep instrument at 520m depth in the winter, 2021. The deep instrument is deployed in shale caprock slightly above the aquifer. To our knowledge, the deep strainmeter at the North Avant Field is the deepest strainmeter ever deployed and this required refining methods originally developed for shallow deployments. The instrument was lowered to depth on oil field tubing and cemented in place using techniques and materials developed for use in oil wells. Optical fiber used to communicate with the instrument was cemented in the annulus on the outside of tubing. This is significant because the techniques we used could readily be extended to greater depth, suggesting that strainmeters can be deployed over a wide range of depths for monitoring critical subsurface processes. For example, it suggests that strainmeters could be deployed through the caprock to monitor for leaks from underlying CO2 storage reservoirs. The strainmeter array at the North Avant Field has been used to characterize deformation during a series of injection tests in the spring and summer, 2021. All the new strainmeters respond to pumping, and the strainmeters we installed earlier also responded. To our knowledge, this is the first application of well testing in a deep aquifer that was monitored by an array of strainmeters—our earlier work used strainmeters at a single location. We are currently analyzing the strain data using an analytical solution, a proxy-based Bayesian inversion algorithm, and other methods. Strainmeter data has also been used to characterize periodic pumping tests by us and Riley Blais. A periodically varying pumping rate causes both hydraulic head and strain signals that vary with the same period as the pumping. The peaks and troughs of the head in monitoring wells lag behind the peaks and troughs of the head in the pumping well, and this lag time increases with distance from the pumping well. The lag time of the pressure and the distance to the monitoring well can be used in a simple analysis to estimate the hydraulic diffusivity of the aquifer. The lag time determined from strain data can be used to estimate aquifer properties using the same analysis that works for the pressure only for strain data measured at particular locations. That is because the strain field in a confining unit advances upward, laterally and then downward even though the pressure in the underlying aquifer only advances laterally, according to our recent simulations. We have field data showing that a small periodic signal superimposed on an injection rate at the North Avant Field will create a periodic strain signal at shallow strainmeters. The field data and the recent simulations suggest that including a periodic component to injection or pumping and then monitoring the resulting strain signal could be a way to monitor the subsurface.

Murdoch, Larry↗
DOE OSTI2024

Air-coupled tsunamis generated from impacts and airbursts: Our understanding before Hunga-Tonga Hunga-Ha'apai

The effort to prevent or mitigate the effects of an impact on Earth is known as planetary defense. A significant component of planetary defense research involves risk assessment. Much of our understanding of the risk from near-Earth objects comes from the geologic record in the form of impact craters, but not all asteroid impacts are crater-forming events. Small asteroids explode before reaching the surface, generating an airburst, and most impacts into the ocean do not penetrate the water to form a crater in the sea floor. The risk from these non-crater-forming ocean impacts and airbursts is difficult to quantify and represents a significant uncertainty in our assessment of the overall threat. We are currently working to better understand impact scenarios that can generate dangerous tsunamis. One of the suggested mechanisms for the production of asteroid–generated tsunamis is by direct coupling of the pressure wave to the water, analogous to the means by which a moving weather front can generate a meteotsunami. To test this hypothesis, we ran a series of airburst simulations and provided time-resolved pressure and wind profiles to use as source functions for tsunami models. We used the CTH hydrocode to model the various airburst scenarios to compare to the results of other simulations and provide time dependent boundary conditions as input to shallow-water wave propagation codes. The strongest and most destructive meteotsunamis are generated by atmospheric pressure oscillations with amplitudes of only a few hPa1 (mbar), corresponding to changes in sea level of a few cm. The resulting wave is strongest when there is a resonance between the ocean and the atmospheric forcing. A Proudman resonance takes place when the atmospheric disturbance’s translational speed (U) equals the longwave phase speed $\sqrt{gh}$ of shallow water wave. Coupling is strongest when the Froude number (Fr=U/c) is unity. A weather front propagates much slower than the speed of sound, so meteotsunamis are most common and dangerous in shallow bodies of water such as the Mediterranean Sea or Lake Michigan. By contrast, the blast wave from an airburst or crater-forming impact propagates at a speed faster than a tsunami in the deepest ocean, and a Proudman resonance cannot be achieved even though the overpressures are orders of magnitude greater. However, blast wave profiles are N-waves in which a sharp shock wave leading to overpressure is followed by a more gradual rarefaction to a much longer-duration underpressure phase. Even though the blast outruns the water wave it is forcing, the tsunami should continue to be driven by the out-of-resonance gradient associated with the suction phase, which may depend strongly on the details of the airburst or impact scenario. The open question is whether there are any conditions under which such an airburst-driven tsunami can be dangerous enough to contribute to the overall impact risk. We have also identified other potential mechanisms for airburst-generated tsunamis: 1) reaction force at the surface from the plume ejected into space, which carries significant momentum, 2) expanding toroidal vortices at the surface, which travel more slowly than the shock wave and can generate a Proudman resonance in relatively shallow ocean (such as continental shelf), and 3) steam explosion from seawater ablation by a “Type II” (Libyan Desert Glass-type) airburst in which the hot vapor jet descends to the surface. On January 15, 2022, the Hunga-Tonga Hunga-Ha’apai volcano, located approximately 60 km north of Tongatapu, the main island of Tonga, violently erupted with a powerful explosion, culminating the period of volcanic activity that started in December of 2021. This event and resulting tsunamis provided an existence proof for the air pressure wave coupling mechanism we proposed. It also suggests that it can be stronger and more significant over much greater distances than we contemplated, leading to global tsunamis associated with impact events on land as well as in the water. Large atmospheric explosions generate global Lamb waves with larger amplitudes, longer periods, and slower speeds than the local and regional blast waves we modeled prior to that event. This paper reviews our analysis and modeling of airburst-driven tsunamis prior to the 2022 Hunga-Tonga Hunga-Ha’apai tsunami, which was the subject of two presentations at the 2023 Planetary Defense Conference and is the subject of another paper currently in preparation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Stereo Camera Deployment in Support of TRACER (Field Campaign Report)

An improved understanding of the salient environmental controls on cloud formation, evolution, and eventual dissipation is critical to address ongoing challenges with cloud process and parameterization representations in global climate and Earth system models. One goal for the recent U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Tracking Aerosol Convection Interactions Experiment (TRACER) campaign was to collect a comprehensive data set that enabled such convective cloud process studies and key demonstrations for those controls that influenced cloud life cycle (i.e., aerosols, thermodynamics) in the Houston, Texas region. To help accomplish this, ARM instrumentation during TRACER was tasked with tracking a large number of individual, isolated convective cells – and to follow the evolution of these cells at high spatiotemporal resolution to characterize changes in cloud dynamic and microphysical properties. Since Houston experiences a range of convective clouds, it was known that the standard ARM Mobile Facility (AMF) instruments may not be sufficient to completely document initiating, transient, or dissipating low- or shallow-cloud behaviors that were also expected during this campaign (in terms of sensitivity, resolution, and/or operational availability). As one partial solution, a supplemental stereo camera deployment (this sub-campaign) was requested to augment the ARM AMF instrumentation to better address shallow and shallow-to-deep transitional types of cloud process drivers during TRACER (ARM stereo cameras for clouds [STEREOCAM]; Romps and Öktem 2018). The primary scientific focus was the relationships between cloud properties and the ambient conditions, which points to several key TRACER science questions including: ‘What is the relationship between cloud size or updraft intensity to the environmental wind shear and/or humidity?’ Overall, the ARM TRACER stereo camera deployment demonstrated unique effectiveness in observing a wide range of critical shallow, congestus, and transitioning or time-evolving cloud characteristics. The data sets from these cameras include information on the clouds' horizontal dimensions, elevations, and depths, while also enabling potential products for cloud initiation and dissipation rates, and vertical velocities. Stereo cameras simultaneously inform on cloud life cycle stage and spatial properties such as cloud fractional coverage, which should provide complementary information for ARM users when combined with TRACER cloud radars, lidar, and/or other profiling sensors. Moreover, camera products offer large-eddy simulation (LES),-scale-appropriate cloud coverage, depth, and spatial variability estimates, while opening additional avenues to challenge difficult process questions on cloud updrafts/entrainment and their covariability with environmental controls such as wind shear and humidity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

On the practical usefulness of the Hardware Efficient Ansatz

Variational Quantum Algorithms (VQAs) and Quantum Machine Learning (QML) models train a parametrized quantum circuit to solve a given learning task. The success of these algorithms greatly hinges on appropriately choosing an ansatz for the quantum circuit. Perhaps one of the most famous ansatzes is the one-dimensional layered Hardware Efficient Ansatz (HEA), which seeks to minimize the effect of hardware noise by using native gates and connectives. The use of this HEA has generated a certain ambivalence arising from the fact that while it suffers from barren plateaus at long depths, it can also avoid them at shallow ones. In this work, we attempt to determine whether one should, or should not, use a HEA. We rigorously identify scenarios where shallow HEAs should likely be avoided (e.g., VQA or QML tasks with data satisfying a volume law of entanglement). More importantly, we identify a Goldilocks scenario where shallow HEAs could achieve a quantum speedup: QML tasks with data satisfying an area law of entanglement. We provide examples for such scenario (such as Gaussian diagonal ensemble random Hamiltonian discrimination), and we show that in these cases a shallow HEA is always trainable and that there exists an anti-concentration of loss function values. Our work highlights the crucial role that input states play in the trainability of a parametrized quantum circuit, a phenomenon that is verified in our numerics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Variability in soil redox response to seasonal flooding in a vernal pond

Vernal ponds are ephemeral landscape features that experience intermittent flooding and drying, leading to variable saturation in underlying soils. Redox potential (E h ) is an important indicator of biogeochemical processes that changes in response to these hydrological shifts; however, high-resolution measurements of E h in variably inundated environments remain sparse. In this study, the responses of soil E h to ponding, drying, and rewetting of a vernal pond were investigated over a 5-month period from late spring through early autumn. Soil E h was measured at 10-min frequencies and at multiple soil depths (2–48 cm below the soil surface) in shallow and deep sections within the seasonally ponded lowland and in unsaturated soils of the surrounding upland. Over the study period, average E h in surface soils (0–8 cm) was oxidizing in the upland (753 ± 79 mV) but relatively reducing in the shallow lowland (369 ± 49 mV) and deep lowland (198 ± 37 mV). Reducing conditions (E h <300 mV) in surface soils prevailed for up to 6 days in the shallow lowland and up to 24 days in the deep lowland after surface water dried out. Intermittent reflooding resulted in multiple shifts between reducing and oxidizing conditions in the shallow lowland while the deep lowland remained reducing following reflooding. Soil E h in the uplands was consistently oxidizing over the study period with transient increases in response to rain events. Reducing conditions in the lowland resulted in greater Fe-oxide dissolution and release of dissolved Fe and P into porewater than in the surrounding uplands. We determined that change in water depth alone was not a good indicator of soil E h , and additional factors such as soil saturation and clay composition should be considered when predicting how E h responds to surface flooding and drying. These findings highlight the spatial and temporal variability of E h within ponds and have implications for how soil processes and ecosystem function are impacted by shifts in hydrology at terrestrial-aquatic interfaces.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Light Regulation of Phytoplankton Growth in San Francisco Bay Studied Using a 3D Sediment Transport Model

In San Francisco Bay (SFB), light availability is largely determined by the concentration of suspended particulate matter (SPM) in the water column. SPM exhibits substantial variation with time, depth, and location. To study how SPM influences light and phytoplankton growth, we coupled a sediment transport model with a hydrodynamic model and a biogeochemical model. The coupled models were used to simulate conditions for the year of 2011 with a focus on northern SFB. For comparison, two simulations were conducted with ecosystem processes driven by SPM concentrations supplied by the sediment transport model and by applying a constant SPM concentration of 20 mg l –1 . The sediment transport model successfully reproduced the general pattern of SPM variation in northern SFB, which improved the chlorophyll-a simulation resulting from the biogeochemical model, with vertically integrated primary productivity varying greatly, from 40 g[C] m –2 year –1 over shoals to 160 g[C] m –2 year –1 in the deep channel. Primary productivity in northern SFB is influenced by euphotic zone depth ( Ze ). Our results show that Ze in shallow water regions (<2 m) is mainly determined by water depth, while Ze in deep water regions is controlled by SPM concentration. As a result, Ze has low (high) values in shallow (deep) water regions. Large (small) differences in primary productivity exist between the two simulations in deep (shallow) water regions. Furthermore, we defined a new parameter F light for “averaged light limitation” in the euphotic zone. The averaged chlorophyll-a concentration in the euphotic zone and F light share a similar distribution such that both have high (low) values in shallow (deep) water regions. Our study demonstrates that light is a critical factor in regulating the phytoplankton growth in northern SFB, and a sediment transport model improves simulation of light availability in the water column.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Thin-Entrance Window Process for Soft X-Ray Sensors

New free electron lasers, such as SLAC’s LCLS-II, will provide unique scientific imaging opportunities. In order to fully utilize these facilities, we need to develop detectors with shallow entrance windows that will enable detection of soft x-rays from 250 eV to 1.5 KeV. Achieving adequately shallow entrance windows is challenging because the high temperature anneal needed to activate the dopant also drives the dopant profile deeper, growing the region that is insensitive to soft x-rays. A new microwave annealing technology provides an efficient way to achieve shallow entrance windows in fully depleted high-resistivity silicon sensors. The microwave anneal technique can activate dopants at low substrate temperature, with minimal dopant diffusion, and can be used to fabricate both n-type and p-type entrance windows. SRP and SIMS measurements were used to verify dopant activation with negligible dopant diffusion. We then applied the microwave anneal process to a planar sensor wafer, using the new process to create the backside diode contact. Electrical test of the resulting sensors shows good reverse bias characteristics. The sensors have been bump-bonded to a read-out ASIC and used successfully to measure an Fe-55 x-ray spectrum. Process and device simulations were performed to characterize the quantum efficiency of the entrance window for soft x-rays. This technique is useful for other sensor applications requiring a shallow entrance window, including detectors for UV photons, low energy ions and low energy electrons.

47 OTHER INSTRUMENTATION↗
NASA NTRS1982

The feasibility of thermal inertia mapping for detection of perched water tables in semi-arid irrigated lands

The thermal inertia mapping remote sensing technique is evaluated as a potential method for delineating areas of shallow perched water tables and related salinization problems on a regional basis. This method for detecting shallow water tables is based on the existence of significant differences in soil thermal properties between wet and dry soil profiles. Ground observations were conducted at two different test sites in California along the flight line, with one site located in a perched water table area and the other site in a well drained area. Measurements were taken hourly during a four day period (two days before and two days after the flight) for variables such as radiometric, meteorologic, soil moisture and temperature profiles, and surface characteristics. Results indicate that it is not feasible using present apparent thermal inertia remote sensing techniques to reliably delineate regional patterns of very shallow water tables due to the complex environmental system. However, some features within specific fields which may be directly related to the local presence of shallow water tables, such as differences in evaporative cooling due to soil moisture effects between and within fields, can be detected using the thermal inertia technique.

Ezra, C. E.↗
NASA NTRS1990

Empirical relationships between gas abundances and UV selective extinction

Several studies of gas-phase abundances in lines of sight through the outer edges of dense clouds are summarized. These lines of sight have 0.4 less than E(B-V) less than 1.1 and have inferred spatial densities of a few hundred cm(-3). The primary thrust of these studies has been to compare gaseous abundances in interstellar clouds that have various types of peculiar selective extinction. To date, the most notable result has been an empirical relationship between the CN/Fe I abundance ratio and the depth of the 2200 A extinction bump. It is not clear at the present time, however, whether these two parameters are linearly correlated or the data are organized into two discrete ensembles. Based on 19 samples and assuming the clouds form discrete ensembles, lines of sight that have a CN/Fe I abundance ratio greater than 0.3 (dex) appear to have a shallow 2.57 plus or minus 0.55 bump compared to 3.60 plus or minus 0.36 for other dense clouds and compared to the 3.6 Seaton (1979) average. The difference in the strength of the extinction bump between these two ensembles is 1.03 plus or minus 0.23. Although a high-resolution IUE survey of dense clouds is far from complete, the few lines of sight with shallow extinction bumps all show preferential depletion of certain elements, while those lines of sight with normal 2200 A bumps do not. Ca II, Cr II, and Mn II appear to exhibit the strongest preferential depletion compared to S II, P II, and Mg II. Fe II and Si II depletions also appear to be enhanced somewhat in the shallow-bump lines of sight. It should be noted that Copernicus data suggest all elements, including the so-called nondepletors, deplete in diffuse clouds (Snow and Jenkins 1980, Joseph 1988). Those lines of sight through dense clouds that have normal 2200 A extinction bumps appear to be extensions of the depletions found in the diffuse interstellar medium. That is, the overall level of depletion is enhanced, but the element-to-element abundances are similar to those in diffuse clouds. In a separate study, the abundances of neutral atoms were studied in a dense cloud having a shallow 2200 A bump and in one with a normal strength bump.

Joseph, Charles L.↗
NASA NTRS1991

A study of the response of nonlinear springs

The various phases to developing a methodology for studying the response of a spring-reinforced arch subjected to a point load are discussed. The arch is simply supported at its ends with both the spring and the point load assumed to be at midspan. The spring is present to off-set the typical snap through behavior normally associated with arches, and to provide a structure that responds with constant resistance over a finite displacement. The various phases discussed consist of the following: (1) development of the closed-form solution for the shallow arch case; (2) development of a finite difference analysis to study (shallow) arches; and (3) development of a finite element analysis for studying more general shallow and nonshallow arches. The two numerical analyses rely on a continuation scheme to move the solution past limit points, and to move onto bifurcated paths, both characteristics being common to the arch problem. An eigenvalue method is used for a continuation scheme. The finite difference analysis is based on a mixed formulation (force and displacement variables) of the governing equations. The governing equations for the mixed formulation are in first order form, making the finite difference implementation convenient. However, the mixed formulation is not well-suited for the eigenvalue continuation scheme. This provided the motivation for the displacement based finite element analysis. Both the finite difference and the finite element analyses are compared with the closed form shallow arch solution. Agreement is excellent, except for the potential problems with the finite difference analysis and the continuation scheme. Agreement between the finite element analysis and another investigator's numerical analysis for deep arches is also good.

Hyer, M. W.↗