Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

How to Get the Best Gas Separation Membranes from State-of-the-Art Glassy Polymers

Herein we focus on fundamental polymer science factors in membrane-based gas separation to open another chapter on this important topic. Realistically thinking about nano and angstrom scale matrix attributes that are translatable into higher performance thin glassy polymer asymmetric membrane layers in practical large-scale devices is crucial. Such thinking should be guided by expertise in both polymer and membrane communities to advance the state of the art. Polymer structures, membrane morphologies and effects of operating conditions are discussed here, using specific examples to illustrate key issues. Rubbery polymers are not the focus of this discussion, since they lack diffusive discrimination for size-similar penetrants, which glassy polymers provide and make them the focus here. Four scalable subtopics guide necessary thinking: (i) plasticization; (ii) anti-plasticization†2; (iii) dual-mode transport involving saturation of unrelaxed free volume, and (iv) non-uniform free volume and stress profiles in thin skin glassy polymer asymmetric or composite membranes. Furthermore, using these subtopics in the context of macromolecular science we discuss issues needed to expand the state-of-the-art in gas separation membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nondestructive Photo-Cross-Linking of Microphase-Separated Diblock Polymers through Coumarin Dimerization

The effect of long-wavelength ultraviolet photocrosslinking on microphase-separated coumarin-containing block polymers was studied by photo-rheometry and small-angle X-ray scattering. This model system consisted of three photocrosslinkable diblock polymers of poly(methoxyethyl acrylate)-b-poly(hexyl methacrylate-co-coumarin methacrylate) with different volume fractions of the crosslinkable coumarin-containing block, which microphase separated into lamellar and cylindrical morphologies. All polymers stiffened upon exposure to 365 nm light, with much greater relative increases in moduli recorded for lamellae-forming polymers (ca. 3200% increase) compared to the cylinder-forming polymer (ca. 550% increase). Disordering transitions that were evident in uncrosslinked samples were no longer observed after crosslinking in the ordered state, and domain sizes were found to remain stable to heating. The photocrosslinking reaction only proceeded under active irradiation, indicating a high degree of spatiotemporal control over curing in this system. Finally, at constant concentration of couamarin within the crosslinkable block, the cure rate was largely independent of polymer composition, suggesting a constant local concentration of coumarin moieties within the segregated crosslinkable domains. Lastly, these findings establish a set of specific structure-property relationships governing the phase-selective photocrosslinking of diblock polymers that can guide the design of robust nanostructured materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

Microphase Separation in Polyelectrolyte Blends: Weak Segregation Theory and Relation to Nuclear "Pasta".

We develop the weak segregation theory of micro phase separation in stoichiometric blends of oppositely and weakly charged polyelectrolytes, which would be immiscible in the absence of charged units. Short-range repulsions between polycation and polyanion monomers induce the formation of oppositely charged domains, the size of which is controlled by their excess Coulomb energy. The diagram of blend morphologies is constructed in the framework of Leibler's mean-field approach and to account for fluctuations within the Brazovskii-Fredrickson-Helfand approximation. Phase behavior of the polyelectrolyte blends is fully analogous to that of neutral diblock copolymers. The mean-field analysis predicts that the order-disorder transition (ODT) is second order for the symmetric blend. In asymmetric mixtures, an increasing incompatibility between polyelectrolytes triggers the usual cascade of first-order phase transitions, dis -> bcc -> hex -> lam. Fluctuations alter the phase diagram topology and allow the direct transitions from the disordered state (dis) to hex and lam microphases; for the symmetric blend, ODT becomes weakly first order. We also discuss that both microphase separation in polyelectrolyte blends and the formation of nuclear "pasta" phases within neutron stars are governed by similar physical principles, despite the 6 orders of magnitude difference in the periods of these structures.

Rumyantsev, Artem M.↗
DOE OSTI2024

ACS Spotlight: Bipolar Membranes for Electrochemical Energy Conversion, Chemical Manufacturing, and Separations

Sustainable energy conversion, chemical manufacturing, and separations are central to addressing the world’s energy and environmental challenges. Electrochemical platforms stand as a cornerstone in addressing these challenges because they are low exergy and can be powered on renewable electrons. In electrochemical systems, bipolar membranes (BPMs) are emerging as a unique class of ion exchange membranes poised to revolutionize various electrochemical processes via pH control of anode and cathode chambers and in situ pH adjustment. In this Spotlight Review, we provide a comprehensive review of electrochemical platforms utilizing BPMs for energy conversion (water electrolyzers for hydrogen production, fuel cells, and flow batteries), chemical manufacturing (electrolyzers that convert carbon dioxide into value-added chemicals and nitrate into ammonia), and separations. The motivation for using BPMs, as well as their performance and durability, in electrochemical platforms are disseminated. We also discuss current challenges that impede BPM electrochemical systems from competing with state-of-the-art electrochemical systems using monopolar ion-exchange membranes (e.g., anion/hydroxide exchange membranes and cation/proton exchange membranes). Here, the review also covers molecular modeling and continuum modeling efforts to understand the basic mechanisms that govern BPM performance.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co2+ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co2+]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Controlling and Optimizing Photoinduced Charge Transfer across Ultrathin Silica Separation Membrane with Embedded Molecular Wires for Artificial Photosynthesis

Ultrathin amorphous silica membranes with embedded organic molecular wires (oligo( p -phenylenevinylene), three aryl units) provide chemical separation of incompatible catalytic environments of CO 2 reduction and H 2 O oxidation while maintaining electronic and protonic coupling between them. For an efficient nanoscale artificial photosystem, important performance criteria are high rate and directionality of charge flow. Here, the visible-light-induced charge flow from an anchored Ru bipyridyl light absorber across the silica nanomembrane to Co 3 O 4 water oxidation catalyst is quantitatively evaluated by photocurrent measurements. Charge transfer rates increase linearly with wire density, with 5 nm -2 identified as an optimal target. Accurate measurement of wire and light absorber densities is accomplished by the polarized FT-IRRAS method. Guided by density functional theory (DFT) calculations, four wire derivatives featuring electron-donating (methoxy) and -withdrawing groups (sulfonate, perfluorophenyl) with highest occupied molecular orbital (HOMO) potentials ranging from 1.48 to 0.64 V vs NHE were synthesized and photocurrents evaluated. Charge transfer rates increase sharply with increasing driving force for hole transfer from the excited light absorber to the embedded wire, followed by a decrease as the HOMO potential of the wire moves beyond the Co 3 O 4 valence band level toward more negative values, pointing to an optimal wire HOMO potential around 1.3 V vs NHE. Comparison with photocurrents of samples without nanomembrane indicates that silica layers with optimized wires are able to approach undiminished electron flux at typical solar intensities. Combined with the established high proton conductivity and small-molecule blocking property, the charge transfer measurements demonstrate that oxidation and reduction catalysis can be efficiently integrated on the nanoscale under separation by an ultrathin silica membrane.

photocurrent measurements↗
DOE OSTI2022

Specific Ion Effects in Lanthanide–Amphiphile Structures at the Air–Water Interface and Their Implications for Selective Separation

The use of surfactants to attract dissolved ions to water surfaces and interfaces is an essential step in both solvent-based and solvent-free separation processes. Here, we have studied the interactions of lanthanide ions in the aqueous subphase with monolayers of dihexadecyl phosphate at air–water interfaces. With heavier lanthanides (atomic number Z ≥ 65) in the subphase, the floating layer can be compressed to an area/molecule of about half the molecular cross section, indicating bilayer formation. X-ray fluorescence and reflectivity data support this conclusion. In the presence of lighter lanthanides (Z < 65), only monolayers are observed. Subphase-concentration-dependent studies using Er 3+ (heavier) and Nd 3+ (lighter) lanthanides show a stepwise progression, with ions attaching to the monolayer only when the solution concentration is >3 × 10 –7 M. Above ~10 –5 M, bilayers form but only in the presence of the heavier lanthanide. Grazing incidence X-ray diffraction shows evidence of lateral ion–ion correlations in the bilayer structure but not in monolayers. Explicit solvent all-atom molecular dynamics simulations confirm the elevated ion–ion correlation in the bilayer system. This bilayer structure isolates heavier lanthanides but not lighter lanthanides from an aqueous solution and is therefore a potential mechanism for the selective separation of heavier lanthanides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Convenient Confinement: Interplay of Solution Conditions and Graphene Oxide Film Structure on Rare Earth Separations

Graphene oxide (GO) membranes are excellent candidates for a range of separation applications, including rare earth segregation and radionuclide decontamination. Understanding nanoscale water and ion behavior near interfacial GO is critical for groundbreaking membrane advances, including improved selectivity and permeability. Here, we experimentally examine the impact of solution conditions on water and lanthanide interactions with interfacial GO films and connect these results to GO membrane performance. The investigation of the confined films at the air–water interface with a combination of surface-specific spectroscopy and X-ray scattering techniques allows us to understand water and ion behaviors separately. Sum frequency generation spectroscopy reveals a dramatic change in interfacial water organization because of graphene oxide film deprotonation. Interfacial X-ray fluorescence measurements show a 17× increase in adsorbed lanthanide to the GO film from subphase pH 3 to pH 9. Liquid surface X-ray reflectivity data show an additional 2.7 $e^–$ per Å 2 for GO films at pH 9 versus pH 3 as well. These results are connected to GO membrane performance, which show increased selectivity and decreased flux for membranes filtering pH 9 solutions. We posit insoluble lanthanide hydroxides form at higher pHs. Taken together, these results highlight the importance of interfacial experiments on model GO systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reconciling the Driving Force and the Barrier to Charge Separation in Donor–Nonfullerene Acceptor Films

We investigate the dependence of charge yields on the driving force for photoinduced electron transfer in a series of all-small-molecule, semiconducting films made from indacenodithiophene nonfullerene acceptors (IDT NFAs). In contrast to reports of efficient, barrierless charge separation at near zero driving force for NFA-containing organic photovoltaics, we find that barrierless charge separation occurs only if the driving force is sufficient to overcome the Coulomb potential, =300 meV, based on time-resolved microwave conductivity and PL quenching measurements of 5 mmolal sensitized and 700 mmolal blended films comprising IDT NFAs paired with three different donors. This discrepancy with recent literature is caused by a difference in the way that we calculate driving force. Far from being semantic, the driving force calculation is crucial because its value controls the mechanisms needed to explain experimental observations. We provide a candid assessment of the uncertainties for our methods and popular ones used in the literature and emphasize the importance of standardizing methods across this field.

14 SOLAR ENERGY↗
DOE OSTI2024

Applying a Phase-Separation Parameterization in Modeling Secondary Organic Aerosol Formation from Acid-Driven Reactive Uptake of Isoprene Epoxydiols under Humid Conditions

Secondary organic aerosol (SOA) from acid-driven reactive uptake of isoprene epoxydiols (IEPOX) contributes up to 40% of organic aerosol (OA) mass in fine particulate matter. Our previous work showed substantial conversions of particulate inorganic sulfates to surface-active organosulfates (OSs) by IEPOX decreases aerosol acidity and creates a viscous organic-rich shell that poses as a diffusion barrier, inhibiting additional reactive uptake of IEPOX. In this study, to account for this “self-limiting” effect, a phase-separation box model was developed to evaluate parameterizations of IEPOX reactive uptake against time-resolved chamber measurements of IEPOX-SOA tracers, including 2-methyltetrols (2-MT) and methyltetrol sulfates (MTS), at ~ 50% relative humidity. The phase-separation model was most sensitive to mass accommodation coefficient, IEPOX diffusivity in the organic shell, and ratio of the third-order reaction rate constants forming 2-MT and MTS (k MT /k MTS ). In particular, k MT /k MTS had to be lower than 0.1 to bring model predictions of 2-MT and MTS in closer agreement with chamber measurements, while prior studies reported values larger than 0.71. The model-derived rate constants favor more particulate MTS formation due to 2-MT likely off-gassing at ambient-relevant OA loadings. Incorporating this parametrization into chemical transport models is expected to predict lower IEPOX-SOA mass and volatility due to the predominance of OSs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Solvent Screening for Separation Processes Using Machine Learning and High-Throughput Technologies

As the chemical industry shifts toward sustainable practices, there is a growing initiative to replace conventional fossil-derived solvents with environmentally friendly alternatives such as ionic liquids (ILs) and deep eutectic solvents (DESs). Artificial intelligence (AI) plays a key role in the discovery and design of novel solvents and the development of green processes. This review explores the latest advancements in AI-assisted solvent screening with a specific focus on machine learning (ML) models for physicochemical property prediction and separation process design. Additionally, this paper highlights recent progress in the development of automated high-throughput (HT) platforms for solvent screening. Finally, this paper discusses the challenges and prospects of ML-driven HT strategies for green solvent design and optimization. To this end, this review provides key insights to advance solvent screening strategies for future chemical and separation processes.

Artificial intelligence↗
DOE OSTI2026

Toward Hydrogen Isotope Separations through Strong Hydrogen Adsorption at Open Copper(I) Sites in an Ultramicroporous Metal-Organic Framework

Metal-organic frameworks with coordinatively unsaturated metal sites (open metal sites) capable of engaging in orbital interactions with pi-acidic gases are of interest for enabling ambient-temperature gas separations, such as hydrogen isotope separations. In view of the weakly pi-acidic nature of H2, we sought to strengthen pi-backbonding-mediated H2 adsorption through pore confinement effects. Toward that end, we synthesized and characterized the ultramicroporous metal-organic framework CuxZn5-xCl4-yHz(bbta)3 (CuIZn-MFU-4; H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole), featuring pi-basic trigonal pyramidal CuI sites that reside within 7 A of one another at their closest. Gas adsorption measurements reveal an H2 adsorption enthalpy of -38 kJ/mol, exceeding that of the larger-pore analog (CuIZn-MFU-4l; -33 kJ/mol) and representing the strongest H2 adsorption yet achieved in a metal-organic framework. The stronger H2 adsorption in CuIZn-MFU-4 is attributed to a combination of pore confinement effects and the increased ..sigma..-accepting nature of the CuI sites caused by a more electron-withdrawing bbta2- linker, as supported by structural, spectroscopic, and computational evidence. With the strongest H2 adsorption, equilibrium isotope effects in CuIZn-MFU-4 lead to a D2/H2 selectivity (as estimated by ideal adsorbed solution theory) of 1.35 even at 298 K, approaching the values reported below 200 K for conventional porous materials.

08 HYDROGEN↗
DOE OSTI2021

Direct observation of charge separation in an organic light harvesting system by femtosecond time-resolved XPS

The ultrafast dynamics of photon-to-charge conversion in an organic light-harvesting system is studied by femtosecond time-resolved X-ray photoemission spectroscopy (TR-XPS) at the free-electron laser FLASH. This novel experimental technique provides site-specific information about charge separation and enables the monitoring of free charge carrier generation dynamics on their natural timescale, here applied to the model donor-acceptor system CuPc:C 60 . A previously unobserved channel for exciton dissociation into mobile charge carriers is identified, providing the first direct, real-time characterization of the timescale and efficiency of charge generation from low-energy charge-transfer states in an organic heterojunction. The findings give strong support to the emerging realization that charge separation even from energetically disfavored excitonic states is contributing significantly, indicating new options for light harvesting in organic heterojunctions.

14 SOLAR ENERGY↗
DOE OSTI2021

In-situ anodic precipitation process for highly efficient separation of aluminum alloys

Electrorefining process has been widely used to separate and purify metals, but it is limited by deposition potential of the metal itself. Here we report in-situ anodic precipitation (IAP), a modified electrorefining process, to purify aluminium from contaminants that are more reactive. During IAP, the target metals that are more cathodic than aluminium are oxidized at the anode and forced to precipitate out in a low oxidation state. This strategy is fundamentally based on different solubilities of target metal chlorides in the NaAlCl4 molten salt rather than deposition potential of metals. The results suggest that IAP is able to efficiently and simply separate components of aluminum alloys with fast kinetics and high recovery yields, and it is also a valuable synthetic approach for metal chlorides in low oxidation states.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vapor-induced phase-separation-enabled versatile direct ink writing

Abstract Versatile printing of polymers, metals, and composites always calls for simple, economic approaches. Here we present an approach to three-dimensional (3D) printing of polymeric, metallic, and composite materials at room conditions, based on the polymeric vapor-induced phase separation (VIPS) process. During VIPS 3D printing (VIPS-3DP), a dissolved polymer-based ink is deposited in an environment where nebulized non-solvent is present, inducing the low-volatility solvent to be extracted from the filament in a controllable manner due to its higher chemical affinity with the non-solvent used. The polymeric phase is hardened in situ as a result of the induced phase separation process. The low volatility of the solvent enables its reclamation after the printing process, significantly reducing its environmental footprint. We first demonstrate the use of VIPS-3DP for polymer printing, showcasing its potential in printing intricate structures. We further extend VIPS-3DP to the deposition of polymer-based metallic inks or composite powder-laden polymeric inks, which become metallic parts or composites after a thermal cycle is applied. Furthermore, spatially tunable porous structures and functionally graded parts are printed by using the printing path to set the inter-filament porosity as well as an inorganic space-holder as an intra-filament porogen.

42 ENGINEERING↗
DOE OSTI2024

Hierarchically porous and single Zn atom-embedded carbon molecular sieves for H2 separations

Abstract Hierarchically porous materials containing sub-nm ultramicropores with molecular sieving abilities and microcavities with high gas diffusivity may realize energy-efficient membranes for gas separations. However, rationally designing and constructing such pores into large-area membranes enabling efficient H 2 separations remains challenging. Here, we report the synthesis and utilization of hybrid carbon molecular sieve membranes with well-controlled nano- and micro-pores and single zinc atoms and clusters well-dispersed inside the nanopores via the carbonization of supramolecular mixed matrix materials containing amorphous and crystalline zeolitic imidazolate frameworks. Carbonization temperature is used to fine-tune pore sizes, achieving ultrahigh selectivity for H 2 /CO 2 (130), H 2 /CH 4 (2900), H 2 /N 2 (880), and H 2 /C 2 H 6 (7900) with stability against water vapor and physical aging during a continuous 120-h test.

42 ENGINEERING↗
DOE OSTI2025

Thermally driven surface phase separation in intermetallic alloys

Intermetallic compounds are widely recognized for their high-temperature phase stability and resistance to composition and structural changes. However, we reveal athermally activated bulk-to-surface mass exchange mechanism that drives surface phase separation, resulting in the formation of surface precipitates with distinct composition andstructure from the bulk matrix. Using the archetypal β-NiAl system, we show that asymmetries in vacancy formation energies between Ni and Al atoms induce preferential Ni segregation to the surface, forming Ni-rich γ'-Ni 3 Al precipitates. By integrating in-situ electron microscopy, synchrotron X-ray absorption spectroscopy and first-principles computational modeling, we establish a direct mechanistic connection between bulk thermal defect dynamics, surface compositional evolution, and phase segregation behavior. This bulk-surface coupling mechanism can be a driver of surface phase separation in multicomponent alloys under thermal stress. In conclusion, these results refine the thermodynamic boundaries of intermetallic stability and provide insights into managingthe performance and durability of intermetallic alloys for demanding high-temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Water as a gas separation membrane

Efficient gas separation membranes are essential for carbon capture, biogas upgrading, and hydrogen purification. Inspired by how plants absorb CO 2 through water, we present a membrane platform that uses liquid water as the selective layer. Hydrophilic sub-100-nm pores stabilize water through strong capillary forces, enabling operation at feed pressures above 72 bar under dry and humid conditions. Selectivity is governed by gas solubility in water, while permeance is tuned by adjusting the water layer thickness. Reducing this thickness below 200 nm yields CO 2 permeances up to 11,600 gas permeation units with CO 2 :N 2 , CO 2 :CH 4 , and CO 2 :H 2 selectivities of 40, 26, and 31, respectively, surpassing the performance of state-of-the-art membranes. Operation is sustained for over a week without water loss, and performance scales using commercially available porous polymer supports under mixed-gas crossflow conditions. Water’s dissolution-based transport avoids saturation and reaction-rate limits, enabling a robust, high-performance, and environmentally benign gas separation platform.

08 HYDROGEN↗