Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reporting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

The 1973 report and recommendations of the NASA Science Advisory Committee on Comets and Asteroids

The present day knowledge is reported of comets and asteroids and recommendations for a development program needed to provide instruments to achieve certain scientific objectives are also presented. Discussions include reports on the primary experiments and instruments, the instruments of potential applicability, mission classes and parameters, mission opportunities, and vehicular technology. An annotated bibliography and recommendations for flight projects, propulsion systems, and experiment development are included.

Atkins, K.↗
NASA NTRS1972

Apollo 15 mission report, supplement 4: Descent propulsion system final flight evaluation

The results of a postflight analysis of the LM-10 Descent Propulsion System (DPS) during the Apollo 15 Mission are reported. The analysis determined the steady state performance of the DPS during the descent phase of the manned lunar landing. Flight measurement discrepancies are discussed. Simulated throttle performance results are cited along with overall performance results. Evaluations of the propellant quantity gaging system, propellant loading, pressurization system, and engine are reported. Graphic illustrations of the evaluations are included.

Avvenire, A. T.↗
NASA NTRS1973

The Apollo Experience Reports.

This paper presents some of the problems and procedures in producing the Apollo Experience Reports, a series of about 121 documents covering the major technical system and subsystem experience in the design concepts for the Apollo Project, NASA's manned lunar landing program. This series of documents replaced technical conferences to document Apollo experience, and met the need to document crew/hardware interface experience. The purpose of these reports is to provide guidance for future programs of the magnitude and complexity of the Apollo Project and to convey very specific information to a selective segment of the engineering and technical management sectors of the aerospace community.

Holman, D. N.↗
NASA NTRS1974

Report on the ALPO LTP observing program

Observations of lunar transient phenomena for the Association of Lunar and Planetary Observers (ALPO) are reported. The procedures for making visual observations for estimating albedo are described, and the reported albedo analyzed for lunar topographic features. It is shown that a catalog or scale of albedos can be established for each feature.

Cameron, W. S.↗
NASA NTRS1967

Report 2: First Application of the Successive Transformation Method

Report 1 of these studies described a basic method for predicting lunar surface temperatures, using readings recorded by Surveyor I and extrapolating to obtain surface temperatures in other selected areas. The areas selected were those considered as potential Apollo landing sites. This second report indicates that the temperature isotherms are directly related to the topographical profile of the surface areas they cover. If, after further observations by Surveyor 11, it becomes evident that the "Successive Transformation Method" provides accurate temperature data, this technique would become a valuable tool for charting the profile of any remote surface where manned spacecraft could be landed.

Rojas, Hector R.↗
NASA NTRS1967

Second Application of the "Successive Transformations Method" to Predict the Safest Lunar Landing Site for an Astronaut: Report 3

The purpose of the first application of the "Successive Transformations Method" described in the second report was to determine, for a manned spacecraft, the optimum landing site on the moon. The results obtained, made by extrapolating the temperature TO furnished by Surveyor, can be summarized as follows: (1) The method is efficient in allowing selection of the optimum landing area. ( 2 ) The zrea selected is extensive and relatively flat; consequently, it is sufficient to allow trine for the difficult landing operation which results from the high speed of the spacecraft when reaching the moon. ( 3 ) The relative temperature obtained is lower than that where Surveyor landed. In this third report, a second application of the "Successive Transformations" is described to determine the safest conditions of a given landing site for the astronaut, especially in relation to determining the composition of the lunar surface material. As a means of accomplishing this task, it is the intent of this paper to analyze lunar craters since they are present over so much of the lunar surface.

Rojas, Hector R.↗
NASA NTRS1976

Special report writer: A flexible information management system. Documentation and user's manual

A special report writer (SSR) was developed which performs multiple correlations on files containing several data hierarchies. Output reports are specified in a simple notation, readily learned by persons having limited familarity with ADP. The SRR system can be adopted by other NASA installations while the basic techniques themselves are compatible with the information management needs of a wide range of organizations. Specifically, the program lends itself to generalization and can be readily adapted for other file management purposes. Extensive details on the characteristics of the SRR program are presented along with a full explanation of the system for those contemplating its application to other data bases. The complete COBOL program and documentation are available.

Greene, W. A.↗
NASA NTRS1976

Reports of accomplishments of planetology programs, 1975 - 1976

Abstracts of reports which summarize work conducted by Planetology Program Principal Investigators are presented. Full reports of selected abstracts were presented to the annual meeting of Planetology Program Principal Investigators at the Center for Astrogeology, U.S. Geological Survey, Flagstaff, Arizona, March 8, 9, 19, 1976.

Source record↗
NASA NTRS1976

NASA Global Atmospheric Sampling Program (GASP). Data report for tape VL0001

Atmospheric trace constituents in the upper troposphere and lower stratosphere are now being measured as part of the NASA Global Atmospheric Sampling Program (GASP), using fully automated air sampling systems on board commercial 747 aircraft in routine airline service. Measurements of atmospheric ozone and related meteorological and flight information obtained during several GASP flights in March 1975 are now available from the National Climatic Center, Asheville, North Carolina. In addition to the data from the aircraft, tropopause pressure data obtained from the National Meteorological Center (NMC) archives for the dates of the flights are included. This report is the first of a series of reports which describes the data currently available from GASP, including flight routes and dates, instrumentation, the data processing procedure used, and data tape specifications.

Holdeman, J. D.↗
NASA NTRS1975

The McDonnell Douglas geophysical observatory program progress report 13 Conjugate point riometer program

This report, the thirteenth and final progress report on the McDonnell Douglas Geophysical Observatory Program, discusses history of the program from 1962 through 1973, and results of the research carried out in 1974. Topic areas covered include: Station operation; Ionospheric work; Solar studies, Magnetospheric studies; Satellite measurements; International participation; and, 1974 research on solar activity, ATS-6 studies, magnetospheric physics, and station operation.

Baker, M. B.↗
NASA NTRS1976

Apollo experience report guidance and control systems

The Apollo guidance and control systems for both the command module and the lunar module are described in a summary report. General functional requirements are discussed, and general functional descriptions of the various subsystems and their interfaces are provided. The differences between the original in-flight maintenance concept and the final lunar-orbital-rendezvous concept are discussed, and the background in philosophy, the system development, and the reasons for the change in concept are chronologically presented. Block diagrams showing the command module guidance and control system under each concept are included. Significant conclusions and recommendations contained in more detailed reports on specific areas of the guidance and control systems are included.

Wilson, R. E., Jr.↗
NASA NTRS1976

Titan/Centaur D-1TTC-5 Helios B flight data report

The fourth operational flight of the newest NASA unmanned launch vehicle is reported. The spacecraft was the Helios B, the second of two solar probes designed and built by the Federal Republic of Germany. The primary mission objective, to place the Helios spacecraft on a heliocentric orbit in the ecliptic plane with a perihelion distance of 0.29 AU, was successfully accomplished. After successful injection of the Helios spacecraft, a series of experiments were performed with the Centaur stage to demonstrate its operational capabilities. All objectives of the extended mission phase were successfully met. This report presents the analysis of the launch vehicle flight data for the primary mission phase of the TC-5 flight.

Adams, K. A.↗
NASA NTRS1976

IMS/Satellite Situation Center report: Orbit plots and bar charts for Prognoz 4, days 1-91 1976

Orbit plots for the Prognoz 4 satellite for the time period January to March 1976 are given. This satellite was identified as a possible important contributor to the International Magnetospheric Study project. The orbits were based on an element epoch of December 26, 1975, 3h 8min and 17s. In view of the low perigee of this satellite, the Satellite Situation Center (SSC) considered that the effect of atmospheric drag precludes orbit predictions for the length of time normally used by the SSC for high-altitude satellites. Consequently, orbit data are shown for the first 3 months of 1976 only. The orbit generated for this report was based on the earlier epoch, and it positions the satellite within 30s of the ascending node at the later epoch. Therefore, within the accuracy of the plots shown in this report, the orbit used was regarded as an achieved orbit. The orbit information is displayed graphically in four ways: bar charts, geocentric solar ecliptic plots, boundary plots, and solar magnetic latitude versus local time plots. The most concise presentation is the bar charts. The bar charts give the crude three-dimensional position of the satellite for each magnetospheric region.

Source record↗
NASA NTRS1977

NASA Global Atmospheric Sampling Program (GASP) data report for tape VL0005

Atmospheric ozone, water vapor, and related flight and meteorological data were obtained during 214 flights of a United Airlines B-747 and two Pan American World Airways B-747's from March through June 1976. In addition, trichlorofluoromethane data obtained from laboratory analysis of two whole air samples collected in flight are reported. These data are available on GASP tape VL0005 from the National Climatic Center, Asheville, North Carolina. In addition to the GASP data, tropopause pressure fields obtained from NMC archives for the dates of the GASP flights are included on the data tape. Flight routes and dates, instrumentation, data processing procedures, and data tape specifications are described in this report. Selected analyses including ozone and sample bottle data are also presented.

Holdeman, J. D.↗
NASA NTRS1977

Apollo Soyuz mission report

A complete report on the goals and results of the Apollo-Soyuz mission is presented. Descriptions of the docking module, command and service modules and crew stations are provided. The overall performance of the Apollo spacecraft and of ground support and biomedical operations is evaluated. The pilot's report is presented, together with launch phase and anomaly summaries.

Lee, C. M.↗
NASA NTRS1977

Mean Velocity, Turbulence Intensity and Turbulence Convection Velocity Measurements for a Convergent Nozzle in a Free Jet Wind Tunnel. Comprehensive Data Report

The effect of flight on the mean flow and turbulence properties of a 0.056m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. This report contains the raw data and graphical presentations. The final technical report includes a description of the test facilities, test hardware, along with significant test results and conclusions.

Mccolgan, C. J.↗