Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

An alternative electrode design for accurate spectral induced polarization measurements in variably saturated porous media

SUMMARY Applications of spectral induced polarization (SIP) require electrodes that maintain hydrologic contact with surrounding soils to capture small electrical responses, often observed as phase shifts in milliradians. For unsaturated soils, electrodes must overcome increased electrical contact impedance due to reduced pore fluid. Traditional designs use a ceramic membrane electrode (CME) with a water reservoir and metal conductor, requiring periodic maintenance to retain electrolytic solution. For field applications where maintenance is impractical, alternative designs are needed. This study evaluated a new electrode design (silica flour electrode, SFE) alongside a CME. SFEs use packed silica flour to store water via capillary forces against a metal conductor. This study examined both designs in three variably saturated soils at soil suctions up to 700 mbar and soil water contents below 1 percent, with SIP measurements across 0.01 to 10 000 Hz frequencies. SFEs match CMEs at high frequencies and perform better at lower frequencies, without requiring ongoing maintenance, making them ideal for field use. In water-only experiments, CMEs produced errors and high noise below 1.5 Hz, whereas SFEs were more accurate. However, CMEs performed better above 300 Hz. In fine sand, SFEs performed better due to the relatively lower contact impedance as compared to CMEs. Both electrode types performed comparably in silty sand and silt loam soils, although CMEs required ongoing maintenance, suggesting potential for long-term reliability issues.

58 GEOSCIENCES↗
DOE OSTI2020

Evaluation of a New Chemical Mechanism for 2-Amino-2-methyl-1-propanol in a Reactive Environment from CSIRO Smog Chamber Experiments

Amines are considered as an emerging class of atmospheric pollutants that are of great importance to atmospheric chemistry and new particle formation. As a typical amine, 2-amino-2-methyl-1-propanol (AMP) is one of the proposed solvents for capturing CO 2 from flue gas streams in amine-based post-combustion CO 2 capture plants, and it is expected to result in AMP emission and secondary products formation in the atmosphere. However, the current knowledge of its atmospheric chemistry and kinetics is poorly understood, particularly in a reactive environment. As such, in this work we used the CSIRO smog chamber to study the photo-oxidation of AMP in the presence of VOCs–NOx surrogate mixtures over a range of initial amine concentrations. O 3 formation was significantly inhibited when AMP was added to the surrogate VOCs–NOx mixtures, implying that AMP could alter known atmospheric chemical reaction pathways and the prevailing reactivity. Simultaneously, a large amount of AMP-derived secondary aerosol was formed, with a considerably high aerosol mass yield (i.e. ratio of aerosol formed to reacted AMP) of 1.06±0.20. Based on updated knowledge of its kinetics, oxidation pathways and product yields, we have developed a new mechanism (designated as CSIAMP-19) and integrated into the Carbon Bond 6 (CB6) chemical mechanism, and evaluated it against available smog chamber data. Compared with the existing AMP mechanism (designated as CarterAMP-08), the modified CB6 with CSIAMP-19 mechanism improves prediction against AMP–VOCs–NOx experiments across a range of initial AMP concentrations, within ±10% model error for gross ozone production. Our results contribute to scientific understanding of AMP photochemistry and to the development of the chemical mechanism of other amines. The updated AMP chemical reactions scheme can be further embedded into the chemical transport model for regional modelling scenarios where AMP-related emissions are of concern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Postprocessing techniques for gradient percolation predictions on the square lattice

In this work, we revisit the classic problem of site percolation on a regular square lattice. In particular, we investigate the effect of quantization bias errors on percolation threshold predictions for large probability gradients and propose a mitigation strategy. We demonstrate through extensive computational experiments that the assumption of a linear relationship between probability gradient and percolation threshold used in previous investigations is invalid. Moreover, we demonstrate that, due to skewness in the distribution of occupation probabilities visited the average does not converge monotonically to the true percolation threshold. Furthermore, we identify several alternative metrics which do exhibit monotonic (albeit not linear) convergence and document their observed convergence rates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Isochronous and period-doubling diagrams for symplectic maps of the plane

Symplectic mappings of the plane serve as key models for exploring the fundamental nature of complex behavior in nonlinear systems. Central to this exploration is the effective visualization of stability regimes, which enables the interpretation of how systems evolve under varying conditions. While the area-preserving quadratic Hénon map has received significant theoretical attention, a comprehensive description of its mixed parameter-space dynamics remain lacking. This limitation arises from early attempts to reduce the full two-dimensional phase space to a one-dimensional projection, a simplification that resulted in the loss of important dynamical features. Consequently, there is a clear need for a more thorough understanding of the underlying qualitative aspects. This paper aims to address this gap by revisiting the foundational concepts of reversibility and associated symmetries, first explored in the early works of G.D. Birkhoff. We extend the original framework proposed by Hénon by adding a period-doubling diagram to his isochronous diagram, which allows to represents the system’s bifurcations and the groups of symmetric periodic orbits that emerge in typical bifurcations of the fixed point. A qualitative and quantitative explanation of the main features of the region of parameters with bounded motion is provided, along with the application of this technique to other symplectic mappings, including cases of multiple reversibility. Modern chaos indicators, such as the Reversibility Error Method (REM) and the Generalized Alignment Index (GALI), are employed to distinguish between various dynamical regimes in the mixed space of variables and parameters. These tools prove effective in differentiating regular and chaotic dynamics, as well as in identifying twistless orbits and their associated bifurcations. Additionally, we discuss the application of these methods to real-world problems, such as visualizing dynamic aperture in accelerator physics, where our findings have direct relevance.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Evaluation of New Additions to OLI Software in Predicting Mercuric and Mercurous Species in Liquid Waste Operations

Speciation of mercury during the pretreatment steps of tank waste processing is critical to successful mercury removal prior to vitrification during Liquid Waste Operations (LWO) at SRS. OLI software has been used to predict mercury speciation and activity throughout LWO. The OLI software operates based on a thermodynamic framework called the Mixed Solvent Electrolyte (MSE) framework. The MSE framework allows prediction in theoretically infinitely dilute to concentrated mixtures (e.g., purely solute solutions). Before modification to the MSE framework databanks, certain critical mercury species were missing in the MSE databank, and some thermodynamic data needed to be updated for the OLI software to accurately predict mercury chemical species in SRS waste tanks. To better reflect streams across LWO, new mercury species were integrated into the MSE database. To evaluate the changes to the OLI MSE framework per the Technical Task Request (TTR) and the Task Technical and Quality Assurance Plan (TTQAP), waste stream compositions from Tanks 38, 43, and Tank 50 decontaminated salt solution (DSS) were used as model inputs. Models were developed and executed using both the old and new databases. Compositional analyses from caustic Tank 50 DSS and caustic Tanks 38 and 43 were used as the input streams. These streams represent the most comprehensive chemical data sets where both mercury and tank constituents were measured together. Results for Tank 50 DSS predict HgO as the predominant species in both databases. Both methyl and dimethyl Hg species are present when the new database is ‘on’ and are not predicted with the new database turned ‘off’. The new database predicts a greater amount of HgO and a greater fraction of it in the solid phase. Pourbaix diagrams (potential vs. pH) generated for each Tank 50 DSS were identical regardless of which database was used. Elemental Hg and HgO were predicted in the water stable region under basic conditions. Tanks 38 and 43 follow similar trends as the Tank 50 DSS models. Unlike Tanks 38 and 50 DSS, the Tank 43 Pourbaix plot shows a region of stability for an aqueous HgOHCO3 - species between approximately pH 7-11. In all streams, when MeHg+ is included in the inputs, the new database predicts aqueous MeHgOH as the dominant species. If elemental or dimethyl mercury is in the waste stream, the new database model predicts they are unchanged and remain in those states and quantities. Additionally, the total mercury values are reported for both the measured input data and the OLI output data for all considered tanks. The summary indicates that the percentage error between the measured and calculated values is less than 1% in all cases The reconciliations and generation of the Pourbaix diagrams for Tank 50 DSS took approximately ten times longer with the new database ‘on’. In addition, over the course of that time, models with the new database ‘on’ were more likely to crash or display an error. Some modest performance improvements were noted when modeling with an i7 processor versus an i5. An example error is found in Appendix A. Furthermore, Appendix B provides V&V for two chemical systems analyzed with the OLI software, results were satisfactory. It is recommended to utilize the new databases (i.e., HCO.ddb and SR-Hg.ddb) in future Savannah River Mission Completion applications of OLI to represent pseudo steady-state. Furthermore, the integration and utilization of the new databases (i.e., HCO.ddb and SR-Hg.ddb) in modeling applications (e.g., Aspen) is also recommended.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Efficient, direct compilation of SU(N) operations into SNAP & Displacement gates

We present a function which connects the parameter of a previously published short sequence of selective number-dependent arbitrary phase (SNAP) and displacement gates acting on a qudit encoded into the Fock states of a superconducting cavity, $V_k(\alpha)=D(\alpha)R_\pi(k)D(-2\alpha)R_\pi(k)D(\alpha)$ to the angle of the Givens rotation $G(\theta)$ on levels $|k\rangle,|k+1\rangle$ that sequence approximates, namely $\alpha=\Phi(\theta) = \frac{\theta}{4\sqrt{k+1}}$. Previous publications left the determination of an appropriate $\alpha$ to numerical optimization at compile time. The map $\Phi$ gives us the ability to compile directly any $d$-dimensional unitary into a sequence of SNAP and displacement gates in $O(d^3)$ complex floating point operations with low constant prefactor, avoiding the need for numerical optimization. Numerical studies demonstrate that the infidelity of the generated gate sequence $V_k$ per Givens rotation $G$ scales as approximately $O(\theta^6)$. We find numerically that the error on compiled circuits can be made arbitrarily small by breaking each rotation into $m$$\theta/m$ rotations, with the full $d\times d$ unitary infidelity scaling as approximately $O(m^{-4})$. This represents a significant reduction in the computational effort to compile qudit unitaries either to SNAP and displacement gates or to generate them via direct low-level pulse optimization via optimal control.

Job, Joshua↗
DOE OSTI2023

Analysis of picosecond coherent anti-Stokes Raman spectra for gas-phase diagnostics

We present a hybrid frequency- and time-domain solution, applicable to the case of picosecond coherent anti-Stokes Raman scattering (CARS), for gas-phase diagnostics. A solution has been derived based on both physical arguments and four-wave mixing equations for picosecond CARS, with pulse durations that are comparable to the dephasing time scale for gas-phase Raman coherence—a regime where commonly employed solutions for impulsive (femtosecond) or cw (nanosecond) pump/Stokes forcing are not strictly valid. We present the ps-CARS spectrum in the form of incoherent sums of CARS intensity spectra, calculated from the fundamental solution for impulsive pump/Stokes Raman preparation. The solution was examined for temperatures from 1000–3000 K, for four plausible experimental configurations, with laser pulse durations of 50–150 ps, and probe pulse delays from −20 to 240 ps. Approximations based on cw and impulsive pump/Stokes preparation to fit picosecond CARS spectra at atmospheric pressure were examined and the relative thermometric accuracy and computational cost of these approximations were quantified for the case of a zero nonresonant CARS contribution, and a nonresonant susceptibility equal to 10% of the Raman-resonant value at the N 2 bandhead. The nanosecond CARS approximation can result in large fitting errors when the probe pulse time delay is less than the probe pulse duration. Errors as large as 10–20% are observed in the fit temperatures for a zero picosecond probe pulse delay, when the nonresonant background is neglected, largely due to an inability of the time-independent cw model to capture transient frequency spread dephasing effects at the Q -branch bandhead. The inclusion of a nonresonant background results in 40–60% thermometry errors with a nanosecond model at a zero-probe delay. Time-dependent impulsive calculations used for femtosecond CARS better approximate the structure of the N 2 bandhead, reducing temperature fitting errors to 5–10% at a short probe pulse delay. The impulsive approximation results in errors up to 10% at intermediate probe pulse delays, where the coherence of the pump and probe pulses leads to multiple terms in the picosecond CARS solution. Both approximations improve as the probe pulse delay exceeds the probe duration. The nanosecond approximation results in a 2–3% error, while the impulsive model results in differences of less than 1% in some cases. Fits to experimental data obtained using short, ∼60ps pulses at a zero probe time delay and longer 100 ps pulses at a substantial 200 ps delay are presented with accuracies of 1–3% in the fit temperature.

Kearney, Sean P.↗
DOE OSTI2024

High Temperature Additive Architectures for 65% Efficiency (Final Technical Report)

This project aimed to develop advanced high-temperature additive components that contribute towards the DOE’s goal for advanced gas turbines that are capable of at least 65% efficiency in combined cycle application. The objective was to leverage state-of-the-art additive manufacturing to develop an innovative stage 1 turbine nozzle (S1N) that can provide cooling flow savings while maintaining the component durability expected in today’s gas turbines. The program had two phases. Phase I was a conceptual phase for novel advanced cooling designs enabled by additive manufacturing, as well as proposals for validation. Phase II included execution of the Phase I conceptual design, including manufacturing of prototype hardware and validation within an environment that is similar to engine operation. During Phase I of the program, the team devised a concept to reduce cooling air usage. The cooling air used in the side walls is filmed out along the side walls, while the cooling air used in the airfoil is eventually directed to near-wall channels and exits holes along the airfoil trailing end. During this program, the team performed additive trials to analyze the geometric limitations of additive manufacturing. This helped the team understand minimum wall thicknesses, hole sizes, and cooling channel dimensions among other limits. Phase II of this program pushed GE Vernova beyond its previous experience of designing and manufacturing an additively manufactured hot gas path component. Modern hot gas path components utilize material chemistries that are traditionally hard to weld, such as cast Renè 108, and exhibit solidification cracking when additively manufactured using Direct Metal Laser Melting (DMLM). Note that AM108 is a powder form of Renè 108. A S1N with advanced cooling is larger and more complex than parts previously built by additive manufacturing and required new learnings to resolve risks around solidification cracking. Finally, the team validated the design in a combustion rig that replicated operation in a gas turbine. In order to properly quantify the benefits of the new additive design, a baseline was also tested in the rig and operated under the same conditions. In addition, an uncertainty analysis was done to quantify any sources of error that could impact the results. At the end of the validation effort, it was determined that the additive nozzle exceeded the 15% reduction in cooling flow goal even with the worst-case assumptions for uncertainty.

03 NATURAL GAS↗
DOE OSTI2021

A 24-Channel Digitizer With a JESD204B-Compliant Serial Interface for High-Speed Detectors

In this report a 24-channel application-specific integrated circuit (ASIC) for the readout of high-speed CMOS active pixel sensors for charged particle detection is presented. The chip comprises 24 preamplifiers, 24 distinct 12-bit, 25 MSPS Pipelined analog-to-digital converters (ADCs) with self-calibration, an internal phase-locked loop (PLL), and a 3 Gbps serial interface that conforms to the JESD204B standard. To simplify interfacing with a variety of sensors, the ASIC also includes an automatic offset calibration loop. The high level of integration of the ASIC reduces overall system cost and area, and exploiting the signal characteristics of the image sensor allows the ADC to be optimized for reduced power dissipation. The use of an integrated serializer and an industry standard protocol simplifies integration of the ASIC into a complete camera system. The ASIC, called the High-Speed Image Preprocessor Targeted for Electron Readout, or HIPSTER, with a die area of 64.26 mm 2 , is packaged in a 480-ball grid array (BGA) and is fabricated in 180-nm CMOS technology. HIPSTER achieves typical differential nonlinearity (DNL) < 0.55 LSB, input-referred thermal noise of $114.5 μV-rms, and a bit error rate (BER) of better than 10-14. The power dissipation is 98 mW/channel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Biases in preconstruction estimates of wind plant annual energy production

Estimating the energy yield of a wind plant during the preconstruction phase is a historically difficult task, even with industry improvements in these estimations. We build on prior research comparing the realized energy production of wind plants and their estimated annual energy production P50 values (median energy production), using owner-provided energy production and losses. We produced similar results to prior studies but with a slightly increasing bias of overestimating median energy production (a bias between realized and estimated energy production of −7.4 % to −6.6 %, depending on the scenario, as opposed to −6.7 % to −5.5 % from earlier studies). In addition to assessing annual energy production P50 bias, we compared both the 1-year and the long-term annual energy production P90 and uncertainty energy yield assessment estimates to the observed long-term-corrected energy production. We found that neither the energy yield assessment uncertainty nor the P90 is conservative enough compared to the observed distribution of prediction errors, suggesting significant room for improvement in the energy yield assessment process.

17 WIND ENERGY↗
DOE OSTI2025

CALPHAD-based ICME design of single-step aging to enhance mechanical strength of WAAM Haynes 282

To match the strength of wire-arc additive manufactured Haynes 282 to its wrought counterpart via a single-step aging heat treatment, the CALPHAD (Calculation of Phase Diagrams) method is integrated with physics-based process-structure-property models and experimental validation. The integrated computational materials engineering (ICME) framework simulates the effects of aging on γ′ and M 23 C 6 precipitation and the resulting yield strength. To improve simulation reliability, the interfacial energies between γ/γ′ and γ/M 23 C 6 carbides were estimated by comparison with precipitation kinetic modeling and measured precipitate sizes. γ′ and M23C6 were found to precipitate simultaneously between 640 and 860 °C, producing microstructures similar to those produced by two-step aging. The optimal γ′ size for peak yield stress was calculated to be 20–23 nm. WAAM Haynes 282 aged at 780 °C for 50 h exceeded the mechanical performance of its wrought counterpart subjected to two-step aging, though desired properties can also be achieved at 800 °C for 16 h or less. The error in yield strength is less than 20 MPa, demonstrating good agreement between the modeling framework and experiments. Creep studies showed that WAAM Haynes 282 exceeded the calculated rupture time, reaching 481 h. This proposed methodology can accelerate the design of aging heat treatments for any γ′-strengthened nickel-base alloy, minimizing the resources required for trial-and-error experiments.

CALPHAD↗
DOE OSTI2023

Improving Subsurface Stress Characterization for Carbon Dioxide Storage Projects by Incorporating Machine Learning Techniques

The overall objective of this project is to develop a framework for reliable characterization and prediction of the state of stress in the overburden and underburden (including the basement) in CO 2 storage reservoirs using machine learning and integrated geomechanics and geophysical methods. Specifically, we propose to develop workflow encompassing of technologies and/or methods to predict stress and pressure changes due to CO 2 injection in an active tertiary recovery site and their impacts on subtle fault activation, fractures and occurrence of microseismic events and compare responses to field observations. In this project, we anticipate using dataset from the Farnsworth field Unit (FWU) which is operated by Purdure Petroleum. A novel elastic-waveform VSP inversion technique will be used to estimate high-resolution spatial and temporal changes of elastic moduli in CO 2 storage reservoirs, which will be combined with velocity-stress relationship derived from laboratory tests to obtain subsurface pressure and stress. Clustered microseismic data will be jointly inverted for improved focal mechanisms. Least-squares reverse-time migration of microseismic waveform data will be performed to directly image fracture/fault zones. Additionally, a deep neural network machine learning technique with convolutional and recurrent layers will be used for learning the spectro-temporal structures in microseismic waveforms. The results of this geotechnical data analysis will be integrated to develop a high-resolution 3D mechanical earth model extending from the overburden sealing formations to the underburden including the basement. Mechanical properties will be derived through integration of mechanical logs, tests, available results from chemo-mechanical laboratory tests, and elastic inversion of seismic data using a combination of Bayesian and stochastic methods as well as machine learning technique. Failure features (faults/fractures) will be represented and/or modeled based on seismic and core data analysis. A transient hydrodynamic-geomechanical model will be developed through coupling with the calibrated FWU reservoir simulation model. The full physics coupled model will be used to train a reduced order proxy model using machine learning algorithm for estimating stress which will then be used with appropriate constitutive relationships and forward seismological models to simulate pressure changes and induced microseismicity. An advanced optimization framework will be developed to perform a history match to minimize error between field observations and simulated. The history matched proxy model will be verified against the full-physics equivalent. The field observations that will be used in the coupled model calibration process include pressure/stress inverted from VSP, moment magnitude from microseismic analysis, real time downhole pressure measurements, production and injection data. Parameter sensitivity and uncertainty analysis will be performed to characterize the impact of model parameter uncertainty on stress estimates. The proposed project will have significant impact on future field implementation of the proposed technology. Because the project field site is an ongoing CO 2 EOR development, the value of the new technology will be demonstrated in an operational context and evaluated as a viable risk mitigation strategy. Cost/benefit will be evaluated together with the various commercial incentives for CO 2 sequestration available to oil and gas operators. The extensive available dataset and ongoing data acquisition under the SWP Phase III work plan provides flexibility for investigation of multiple approaches and reduces technical risk.

58 GEOSCIENCES↗
DOE OSTI2020

Composition Measurements of the LAW Phase 4 Glasses

In this report, the Savannah River National Laboratory provides results from the analyses of glass compositions for a series of simulated nuclear waste glasses fabricated at the Pacific Northwest National Laboratory. The series included quenched versions of the glasses. The resulting data will be used in the development of enhanced property/composition models for waste vitrification at Hanford. Chemical analyses were performed on a representative sample of each of the quenched glasses to allow for comparisons with the targeted compositions. For the quenched glasses from Set 1, measured concentrations of B 2 O 3 and SiO 2 were generally above the targeted values. Measured concentrations for MgO and P 2 O 5 were generally low for glasses. Measured concentrations of ZrO 2 were both below and above the targeted values for glasses. For the quenched glasses from Set 2, measured concentrations of AL 2 O 3 , B 2 O 3 , P 2 O 5 , SiO 2 , and ZrO 2 were generally below the targeted values. Measured concentrations of Na 2 0 were both below and above the targeted values for glasses. The measured concentrations of chlorine, fluorine, and SO 3 were below the targeted values for most of the study glasses, likely because of volatility during melting. Overall, there were no indications of errors in batching of the simulated waste glasses. These results can be used in further characterization of this series of glasses, including the normalization of Product Consistency Test results.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Refractivity Observations from Radar Phase Measurements: The 22 May 2002 Dryline Case during IHOP Project

The dryline, often associated with the development of severe storms in the Southern Great Plains of the United States of America, is a boundary layer phenomenon that occurs when a warm and moist air mass from the Gulf of Mexico meets a hot and dry air mass from the southwest desert area. An accurate knowledge of the water vapor spatio-temporal variability in the lower part of the atmosphere is crucial for a better understanding of the evolution of the dryline. The tropospheric refractivity, directly related to water vapor content, is a proxy for the water vapor content of the troposphere. It has already been demonstrated that the refractivity and the refractivity vertical gradient can be jointly estimated from radar phase measurements. In fact, it has been shown that using kriging interpolation techniques, accurate refractivity maps within the coverage area of the radar can be obtained with high temporal resolution. In this paper, a detailed analysis of the time series of radar-based refractivity maps obtained during a dryline that occurred on the afternoon of 22 May 2002 during the International H 2 O Project is presented. Comparisons between the time series of radar refractivity maps, obtained with the NCAR S-Pol radar, and the refractivity measurements derived from automatic ground-based weather stations and the AERI instrument, placed at different locations within the coverage area of the NCAR S-Pol radar, demonstrate the accuracy of radar refractivity estimates even for highly variable conditions, both in time and space, in the troposphere. Correlation coefficients higher than 0.95 are obtained in all weather station locations. Regarding the RMSE, errors less than 6 N-units are obtained for all cases, being even as low as 2.92 N-units at some locations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Producing two-dimensional dust clouds and clusters using a movable electrode for complex plasma and fundamental physics experiments

We report a Bidirectional Electrode Control Arm Assembly (BECAA) for precisely manipulating dust clouds levitated above the powered electrode in RF plasmas. The reported techniques allow the creation of perfectly 2D dust layers by eliminating off-plane particles by moving the electrode from outside the plasma chamber without altering the plasma conditions. Here, the tilting and moving of electrodes using BECAA also allows the precise and repeatable elimination of dust particles one by one to achieve any desired number of grains N without trial and error. Simultaneously acquired top and side view images of dust clusters show that they are perfectly planar or 2D. A demonstration of clusters with N = 1–28 without changing the plasma conditions is presented to show the utility of BECAA for complex plasma and statistical physics experimental design. Demonstration videos and 3D printable part files are available for easy reproduction and adaptation of this new method to repeatably produce 2D clusters in existing RF plasma chambers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Application-specific optimal model weighting of global climate models: A red tide example

Global climate models (GCMs) and Earth system models (ESMs) provide many climate services with environmental relevance. The High Resolution Model Inter-comparison Project (HighResMIP) of the Coupled Model Intercomparison Project Phase 6 (CMIP6) provides model runs of GCMs and ESMs to address regional phenomena. Developing a parsimonious ensemble of CMIP6 requires multiple ensemble methods such as independent-model subset selection, prescreening-based subset selection, and model weighting. The work presented here focuses on application-specific optimal model weighting, with prescreening-based subset selection. As such, independent ensemble members are categorized, selected, and weighted based on their ability to reproduce physically-interpretable features of interest that are problem-specific. We discuss the strengths and caveats of optimal model weighting using a case study of red tide prediction in the Gulf of Mexico along the West Florida Shelf. Red tide is a common name of specific harmful algal blooms that occur worldwide, causing adverse socioeconomic and environmental impacts. Our results indicate the importance of prescreening-based subset selection as optimal model weighting can underplay robust ensemble members by optimizing error cancellation. Prescreening-based subset selection also provides insights about the validity of the model weights. By illustrating the caveats of using non-representative models when optimal model weighting is used, the findings and discussion of this study are pertinent to many other climate services.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantifying Progress Across Different CMIP Phases With the ESMValTool

Abstract More than 40 model groups worldwide are participating in the Coupled Model Intercomparison Project Phase 6 (CMIP6), providing a new and rich source of information to better understand past, present, and future climate change. Here, we use the Earth System Model Evaluation Tool (ESMValTool) to assess the performance of the CMIP6 ensemble compared to the previous generations CMIP3 and CMIP5. While CMIP5 models did not capture the observed pause in the increase in global mean surface temperature between 1998 and 2013, the historical CMIP6 simulations agree well with the observed recent temperature increase, but some models have difficulties in reproducing the observed global mean surface temperature record of the second half of the twentieth century. While systematic biases in annual mean surface temperature and precipitation remain in the CMIP6 multimodel mean, individual models and high‐resolution versions of the models show significant reductions in many long‐standing biases. Some improvements are also found in the vertical temperature, water vapor, and zonal wind speed distributions, and root‐mean‐square errors for selected fields are generally smaller with reduced intermodel spread and higher average skill in the correlation patterns relative to observations. An emerging property of the CMIP6 ensemble is a higher effective climate sensitivity with an increased range between 2.3 and 5.6 K. A possible reason for this increase in some models is improvements in cloud representation resulting in stronger shortwave cloud feedbacks than in their predecessor versions.

Bock, L.↗