SEARCH · Engineering Papers

Results for “performance gain”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

All sources NASA NTRS DOE OSTI

NASA NTRS1979

The significance of wing end configuration in airfoil design for civil aviation aircraft

Lift-dependent induced drag in commercial aviation aircraft is discussed, with emphasis on the necessary compromises between wing and configuration modifications which better lift performance and the weight gains accompanying such modifications. Triangular, rectangular and elliptical configurations for wing ends are considered; attention is also given to airfoil designs incorporating winglets. Water tunnel tests of several configurations are reported. In addition, applications of wing and modifications to advanced technology commercial aviation aircraft and the Airbus A-300 are mentioned.

Zimmer, H.↗

NASA NTRS1980

On the low lying singlet states of BeO

Calculations of the ground and low-lying singlet states of BeO are performed in order to gain an understanding of the techniques needed to treat the excited states of other, more complex, ionic molecules. The MCSCF and CI calculations are based on a Gaussian basis set of slightly better than double zeta plus polarization quality for single configuration descriptions of the states. The calculated X-A and X-B state separations are found to be in agreement with experimental measurements. The 1 Sigma - and 1 Delta states are predicted to lie approximately 40,000 kaysers above the ground state and are identified as the C and D states.The 2 1 Pi state is found to be approximately 15,000 kaysers and the 3 1 Sigma + state is found to be approximately 65,000 kaysers above the ground state.

Bauschlicher, C. W., Jr.↗

NASA NTRS1982

Control law development for a close-coupled canard, relaxed static stability fighter

The performance benefits to be gained from relaxed static stability (RSS) are illustrated for M = 0.9 and M = 2.0 flight conditions. The longitudinal, directional, and lateral control system structure is developed. The effect of static margin, bandwidth, and canard-wing interaction on canard rate requirements is analyzed. Control and maneuver limiter functions are developed and implemented about all three axes; simulation results strikingly demonstrate the concomitant improvement in energy management and improved resistance to departure and spin.

Klein, R. W.↗

NASA NTRS1983

Simulator study of a flight director display

A six degree of freedom, fixed base simulation study of the use of a flight director by general aviation pilots in an instrument landing system approach was conducted. An autopilot command law was used to drive the flight director needles. Time histories of the pilot aircraft display system responses and standard deviations and means of the glide slope and localizer errors were obtained. The pilot aircraft display system responses with the flight director were very similar to the autopilot aircraft responses. Without the flight director, the pilot aircraft display system exhibited less damping than with the flight director. The sensitivity of the flight director command laws was judged to be about as high as it could be by the test subjects. Thus, further improvement in the pilot aircraft display system performance by increasing the gains in the command laws was precluded.

Adams, J. J.↗

NASA NTRS1983

RF front end interface and AGC modification

Preliminary results indicate that the new front end automatic gain control (AGC) combination perform satisfactorily. Side by side bench tests with Trimble 10A and Texas Instruments 9900 LORAN-C receivers have proven that the proper time differences are being obtained. Further optimization of the AGC circuit will occur as software to track all of the stations in a LORAN-C chain is developed. The AGC circuit was designed to sample up to six separate LORAN-C stations. Along with expanded station tracking software, a more sophisticated search routine is also under development. A printed circuit board for the AGC is planned and will be enclosed with the RF front end in a sealed enclosure to reduce interference from the other digital circuits of the microcomputer.

Yost, S. R.↗

NASA NTRS1986

Structural deformation of the Leoville chondrite

A petrofabric study of the Leoville chondrite was performed in order to gain an understanding of its deformation process. Strain values were determined from the chondrules' axial ratios or by the all-object-separation method, and the compaction required to deform Leoville chondrules was calculated from the decrease of radius in the circle-to-ellipse transformation. Structural and strain studies indicate the following order of events experienced by Leoville: (1) formation as an accretionary breccia, (2) compaction and development of foliation, (3) fracturing, possibly due to impact on earth, and (4) terrestrial weathering. Similarities between the axial ratios of chondrules (1.9-2.0) and of the whole meteorite (2.0) indicate either that Leoville deformed homogeneously or that it deformed as a framework of touching chondrules. This amount of strain corresponds to approximately 33 percent uniaxial shortening, assuming constant volume, and is likely to have been caused by compaction due to overburden from progressive accretion on the chondrite body. Diffusional flow is believed to be the mechanism by which olivines in these chondrules deformed.

Cain, P. M.↗

NASA NTRS1987

A new linear quadratic optimal controller for the 34-meter high efficiency antenna position loop

The design of a new position loop controller for the 34-meter High Efficiency Deep Space antennas using linear quadratic (LQ) optimal control techniques is discussed. The LQ optimal control theory is reviewed, and model development and verification are discussed. Families of optimal gain vectors are generated by varying weight parameters. Performance specifications were used to select a final gain vector. Estimator dynamics were selected and the corresponding gain vectors were computed. Final estimator selection was based on position, commanded rate, and estimator error responses.

Nickerson, J. A.↗

NASA NTRS1988

Linear-Quadratic Controller For Aiming A Large Antenna

Independent control and estimator gains selected for optimal performance. Report describes use of techniques of linear-quadratic optimal control to design digital controller aiming large antenna. Based on closed-loop concept including mathematical model of plant and independently-selectable mathematical model estimates state of system.

Nickerson, Jackson A.↗

NASA NTRS1988

Compensation of relector antenna surface distortion using an array feed

The dimensional stability of the surface of a large reflector antenna is important when high gain or low sidelobe performance is desired. If the surface is distorted due to thermal or structural reasons, antenna performance can be improved through the use of an array feed. The design of the array feed and its relation to the surface distortion are examined. The sensitivity of antenna performance to changing surface parameters for fixed feed array geometries is also studied. This allows determination of the limits of usefulness for feed array compensation.

Cherrette, A. R.↗

NASA NTRS1988

Mobilestar field test program

Various field tests were performed in order to gain practical experience and a broader understanding of mobile communications. The first phase consisted of CW propagation tests to develop firsthand experience of propagation phenomena. From this information, estimates of the feasibility and accuracy of power control were possible. The next phase tested the idea of power control. Equipment representative of that expected to be used in an actual mobile satellite communication system was assembled and tested under a variety of environments.

Rubow, Wayne↗

NASA NTRS1987

The load shedding advisor: An example of a crisis-response expert system

A Prolog-based prototype expert system is described that was implemented by the Network Operations Branch of the NASA Goddard Space Flight Center. The purpose of the prototype was to test whether a small, inexpensive computer system could be used to host a load shedding advisor, a system which would monitor major physical environment parameters in a computer facility, then recommend appropriate operator reponses whenever a serious condition was detected. The resulting prototype performed significantly to efficiency gains achieved by replacing a purely rule-based design methodology with a hybrid approach that combined procedural, entity-relationship, and rule-based methods.

Bollinger, Terry B.↗

NASA NTRS1988

Vehicle antenna development for mobile satellite applications

The paper summarizes results of a vehicle antenna program at JPL in support of a developing U.S. mobile satellite services (MSS) designed to provide telephone and data services for the continental United States. Two classes of circularly polarized vehicle antennas have been considered for the MSS: medium-gain, satellite-tracking antennas with 10-12-dBic gain; and low-gain, azimuthally omnidirectional antennas with 3-5-dBic gain. The design and performance of these antennas are described, and the two antennas are shown to have peculiar advantages and disadvantages.

Woo, K.↗

NASA NTRS1989

Compensation of reflector antenna surface distortion using an array feed

Cherrette, Alan R.↗

NASA NTRS1990

An in-flight interaction of the X-29A canard and flight control system

Many of today's high performance airplanes use high gain, digital flight control systems. These sytems are liable to couple with the aircraft's structural dynamics and aerodynamics to cause an aeroservoelastic interaction. These interactions can be stable or unstable depending upon damping and phase relationships within the system. The details of an aeroservoelastic interaction experienced in flight by the X-29A forward-swept wing airplane. A 26.5-Hz canard pitch mode response was aliased by the digital sampling rate in the canard position feedback loop of the flight control system, resulting in a 13.5-Hz signal being commanded to the longitudinal control surfaces. The amplitude of this commanded signal increased as the wear of the canard seals increased, as the feedback path gains were increased, and as the canard aerodynamic loading decreased. The resultant control surface deflections were of sufficient amplitude to excite the structure. The flight data presented shows the effect of each component (structural dynamics, aerodynamics, and flight control system) for this aeroservoelastic interaction.

Kehoe, Michael W.↗

NASA NTRS1992

Advanced technologies to support earth orbiting systems

Within NASA, the Office of Aeronautics and Space Technology (OAST) is conducting a major, ongoing engineering research and technology program directed toward the support of future programs, with a major focus on technology for future space science missions. OAST is conducting a substantial effort to identify the technologies required to support the evolution of Mission to Planet Earth. The effort consists of studies, workshops, and technology research programs to explore: (1) new concepts for multisatellite, earth-observing instrumentation and sensor sets; (2) information system advances for continuous and reliable processing of terabit per day data streams; and (3) infrastructure development, including spacecraft bus technology and operations for substantial performance, cost, and reliabiltiy gains. This paper discusses the technological needs of future earth science systems, reviews current and planned activities, and highlights significant achievements in the research and technology program.

Rosen, Robert↗

NASA NTRS1992

Beamed energy propulsion

Beamed energy concepts offer an alternative for an advanced propulsion system. The use of a remote power source reduces the weight of the propulsion system in flight and this, combined with the high performance, provides significant payload gains. Within the context of this study's baseline scenario, two beamed energy propulsion concepts are potentially attractive: solar thermal propulsion and laser thermal propulsion. The conceived beamed energy propulsion devices generally provide low thrust (tens of pounds to hundreds of pounds); therefore, they are typically suggested for cargo transportation. For the baseline scenario, these propulsion system can provide propulsion between the following nodes: (1) low Earth orbit to geosynchronous Earth orbit; (2) low Earth orbit to low lunar orbit; (3) low lunar orbit to low Mars orbit--only solar thermal; and (4) lunar surface to low lunar orbit--only laser thermal.

Shoji, James M.↗

NASA NTRS1991

Optimal digital redesign of cascaded analogue controllers

This paper presents a new, optimal digital redesign technique for finding an optimal cascaded digital controller from the given continuous-time counterpart by minimizing a quadratic performance index. The control gains can be obtained by solving a set of Liapunov equations. The developed optimal cascaded digital controller enables the state and/or outputs of the digitally controlled closed-loop sampled-data system to optimally match those of the original continuous-time closed-loop system at any instant between sampling periods. The developed control law can be implemented using inexpensive and reliable digital electronics with a relatively long sampling period.

Shieh, L. S.↗

NASA NTRS1994

Experimental evaluation of shape memory alloy actuation technique in adaptive antenna design concepts

Creation of an antenna system that could autonomously adapt contours of reflecting surfaces to compensate for structural loads induced by a variable environment would maximize performance of space-based communication systems. Design of such a system requires the comprehensive development and integration of advanced actuator, sensor, and control technologies. As an initial step in this process, a test has been performed to assess the use of a shape memory alloy as a potential actuation technique. For this test, an existing, offset, cassegrain antenna system was retrofit with a subreflector equipped with shape memory alloy actuators for surface contour control. The impacts that the actuators had on both the subreflector contour and the antenna system patterns were measured. The results of this study indicate the potential for using shape memory alloy actuation techniques to adaptively control antenna performance; both variations in gain and beam steering capabilities were demonstrated. Future development effort is required to evolve this potential into a useful technology for satellite applications.

Kefauver, W. Neill↗