Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pattern separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Downdrafts within High Plains cumulonimbi. I - General kinematic structure

Results from a comprehensive investigation in which observations from several case studies are integrated with three-dimensional cloud model results to examine the general kinematic structure of downdrafts associated with High Plains precipitating convection are presented. One particular downdraft type, the low-level precipitation-associated downdraft, is the focus of this paper. General airflow and trajectory patterns within low-level downdrafts are convergent from 0.8 km upwards to downdraft top, typically less than 5 km AGL. Observed mass flux profiles often increase rapidly with height as a result of strong buoyancy forcing below the melting level. Inflow to the low-level downdraft, although vertically continuous can be separated into two branches. The up-down branch originating within the planetary boundary layer initially rises up to 4 km and then descends within the main precipitation-associated downdraft. The midlevel branch, usually more pronounced during early downdraft stages, originates from above the PBL and transports low-valued theta sub e air to low levels. The depth of the low-level downdraft can be approximated by the environmental sounding transition level, defined as the vertical height interval separating conditionally unstable to neutral air below from roughly stable air above. The low-level downdraft is most frequently located along the upshear storm flank relative to the updraft, although a downshear downdraft may become common under higher environmental wind shear.

Knupp, Kevin R.↗

A New ERA in Global Temperature Monitoring with the Advanced Microwave Sounding Unit (AMSU)

The launch of the first Advanced Microwave Sounding Unit (AMSU) on the NOAA-15 spacecraft on 13 May 1998 marked a significant advance in our ability to monitor global temperatures. Compared to the Microwave Sounding Units (MSU) flying since 1978 on the TIROS-N series of NOAA polar orbiters, the AMSU offers better horizontal, vertical, and radiometric resolutions. It will allow routine monitoring of 1 1 (mostly) separate layers, compared to 2 or 3 with the MSU, including layers in the middle and upper stratosphere (2.5 hPa) where increasing carbon dioxide concentrations should be causing a cooling rate of about 1 deg. C per decade. More precise limb corrections combined with low noise will allow identification of subtle spatial temperature patterns associated with global cyclone activity.

Spencer, Roy W.↗

Prompt and Precise Prototyping

For Sanders Design International, Inc., of Wilton, New Hampshire, every passing second between the concept and realization of a product is essential to succeed in the rapid prototyping industry where amongst heavy competition, faster time-to-market means more business. To separate itself from its rivals, Sanders Design aligned with NASA's Marshall Space Flight Center to develop what it considers to be the most accurate rapid prototyping machine for fabrication of extremely precise tooling prototypes. The company's Rapid ToolMaker System has revolutionized production of high quality, small-to-medium sized prototype patterns and tooling molds with an exactness that surpasses that of computer numerically-controlled (CNC) machining devices. Created with funding and support from Marshall under a Small Business Innovation Research (SBIR) contract, the Rapid ToolMaker is a dual-use technology with applications in both commercial and military aerospace fields. The advanced technology provides cost savings in the design and manufacturing of automotive, electronic, and medical parts, as well as in other areas of consumer interest, such as jewelry and toys. For aerospace applications, the Rapid ToolMaker enables fabrication of high-quality turbine and compressor blades for jet engines on unmanned air vehicles, aircraft, and missiles.

Source record↗

Understanding Geospace on a Grand Scale: The Global Ionoshphere/Thermosphere Constellation

We present the concept of a constellation of polar orbiting satellites equally spaced in longitude (local time) to systematically sample both the neutral and ionzed gas components of the Earth in circular orbits near 350 km, including their density, temperature, and velocities. The instrumentation would include techniques to measure the height of the ionospheric "F-peak" and its variations along the orbit. The number of satellites (l2? 24? 48?) and their configuration would be determined from modeling analysis and expected geophysical phenomena, including their drivers and characteristic time scales. Together with imaging data from separate satellites, the array of satellites with in situ probes would be expected to provide a new picture of (1) high latitude electrodynamics and atmospheric processes and associated coupling with magnetospheric mass and momentum input, (2) the response of the global ionosphere and thermosphere to magnetic storms, and (3) global neutral wind circulation patterns, neutral density structure, tides, planetary waves, and gravity waves. The comprehensive measurements gathered by the IT-Constellation envisioned here would provide a major leap forward in each of these areas, addressing global physical processes and providing fundamental, new knowledge of Geospace. In particular, by its very nature, the constellation addresses "system science", revealing how the ionosphere-thermosphere connects globally to the magnetosphere above and the troposphere below. We present this concept as the next logical step in observing the "whole" space environment using in situ probes in conjunction with imagers. We invite modelers to not only comment on this concept but also to become actively engaged in helping to define it.

Pfaff, Robert↗

OGLE-2018-BLG-1700L: Microlensing Planet in Binary Stellar System

We report a planet in a binary that was discovered from the analysis of the microlensing event OGLE-2018-BLG-1700. We identify the triple nature of the lens from the fact that the anomaly pattern can be decomposed into two parts produced by two binary-lens events, in which one binary pair has a mass ratio of ∼0.01 between the lens components and the other pair has a mass ratio of ∼0.3. We find two sets of degenerate solutions, in which one solution has a projected separation between the primary and its stellar companion less than the angular Einstein radius θ(E) (close solution), while the other solution has a separation greater than θ(E) (wide solution). From the Bayesian analysis with the constraints of the event timescale and angular Einstein radius, we find that the planet has a mass of 4.4(sup +3.0, sub -2.0) M(J) and the stellar binary components have masses of 0.42 (sup +0.29, sub -0.19) M(ʘ) and 0.12 (sup +0.08, sub -0.05) M(ʘ) , respectively, and the distance to the lens is D(L) = 7.6 (sup +1.2, sub -0.9) kpc. The planet is a circumstellar planet according to the wide solution, while it is a circumbinary planet according to the close solution.

Cheongho Han↗

Identifying Meteorological Influences on Marine Low Cloud Mesoscale Morphology Using Satellite Classifications

Marine low cloud mesoscale morphology in the southeastern Pacific Ocean is analyzed using a large dataset of machine-learning generated classifications spanning three years. Meteorological variables and cloud properties are composited 10by mesoscale cloud type, showing distinct meteorological regimes of marine low cloud organization from the tropics to the midlatitudes. The presentation of mesoscale cellular convection, with respect to geographic distribution, boundary layer structure, and large-scale environmental conditions, agrees with prior knowledge. Two tropical and subtropical cumuliform boundary layer regimes, suppressed cumulus and clustered cumulus, are studied in detail. The patterns in precipitation, circulation, column water vapor, and cloudiness are consistent with the representation of marine shallow mesoscale convective 15 self-aggregation by large eddy simulations of the boundary layer. Although they occur under similar large-scale conditions, the suppressed and clustered low cloud types are found to be well-separated by variables associated with low-level mesoscale circulation, with surface wind divergence being the clearest discriminator between them, whether reanalysis or satellite observations are used. Clustered regimes are associated with surface convergence and suppressed regimes are associated with surface divergence.

Johannes Mohrmann↗

Evaluation of spectral channels and wavelength regions for separability of agricultural cover types

The purpose of this study was to evaluate the spectral channel as well as wavelength regions - visible, near infrared, middle infrared and thermal infrared - with respect to their estimated probability of correct classification (P-c) in discriminating agricultural cover types. Multispectral scanner data in twelve spectral channels in the wavelength range of 0.4 to 11.7 micron acquired in the middle of July for three flightlines were analysed by applying automatic pattern recognition techniques. The same analysis was performed for the data acquired in the middle of August, over the same three flightlines, to investigate the effect of time on the results. The effect of deletion of each spectral channel as well as each wavelength region on P-c is given. Values of P-c for all possible combinations of wavelength regions in the subsets of one to twelve spectral channels are also given. The overall values of P-c were found to be greater for the data of the middle of August than the data of the middle of July.

Kumar, R.↗

Chemistry and petrology of Luna 24 lithic fragments and less than 250-micron soils - Constraints on the origin of VLT mare basalts

Results are reported on a combined INAA-petrologic study of 17 small (0.2-1.5 mg) Luna 24 lithic and mineral fragments and INAA study of 5 bulk soils and mineral separates from gabbro 24170. Lithic and mineral fragments are classified into VLT mare basalts (ferrobasalt and metabasalts), low-Ti, variolitic mare basalt, gabbros, melt rock and soil breccia. Data indicate 5 possible magma types, represented by: (1) VLT ferrobasalt and gabbro fragments, with low-TiO2 (about 1%), slightly bow-shaped REE pattern, and low REE concentrations (5-10X chondritic); (2) a ferrobasalt (Laul et al., 1978) and metabasalt fragments with major and trace element contents similar to (1), but positive Eu anomalies; (3) one gabbro fragment with distinctive pyroxene compositional trend (increasing Ti with nearly constant Fe/Fe + Mg) and highest REE contents of any Luna 24 mare basaltic sample, (4) a gabbro fragment with considerably less V and Cr2O3 than ferrobasalt and metabasalt fragments; and (5) variolitic basalt fragment with higher Ti2(2.3%) than other Luna 24 basalts and pyroxene that has increasing then decreasing Ti with increasing Fe/Fe + Mg. Trace element data place constraints on the nature of the source region and possible parent magmas for the Luna 24 VLT ferrobasalt.

Ma, M.-S.↗

CROP type analysis using Landsat digital data

Classification and statistical sampling techniques for crop type discrimination using Landsat digital data have been developed by the University of California in cooperation with NASA and the California Department of Water Resources. Ratioed bands (MSS 7/5 and 5/4) and a sun-angle corrected Euclidean albedo band were prepared from data for the Sacramento Valley for five different dates. The test area was stratified into general crop groupings based on the particular patterns of irrigation timing for each crop. Data classified within each stratum were used to produce a crop type map. Comparison with ground data indicates that certain crops and crop groups are discernable. Small grains and rice are easily identifiable, as are deciduous fruit varieties as a group. However, it is not feasible to separate various fruit and nut varieties, or separate vegetable crops with these techniques at present.

Brown, C. E.↗

Internal motions in H II regions

The internal motions in H II regions are in two separate but related components, ordered motion originating from differences in pressure and from impulse due to forces such as the stellar winds, and random motion originating from the turbulent flow of the gas. Ordered motion now seems to be reasonably well understood to the first order, while recent observational material on turbulence indicates a pattern of behavior only similar to the expectations of turbulence theory, with poor agreement in many major details.

Odell, C. R.↗

Experimental flowfield visualization of a high alpha wing at Mach 1.62

Experimental oil-flow and tuft patterns and vapor-screen flow-visualization data were obtained on a cambered wing model at Mach = 1.62 for an angle-of attack range of 0-14 deg. These data were used as flow diagnostic tools along with surface-pressure and force data and full-potential theory calculations. A large separation bubble was found on the lower wing surface at low angle of attack. The high-angle-of-attack flowfield was characterized by a large attached-flow leading-edge expansion followed by a crossflow shock. At alpha = 14 deg the crossflow shock apparently induced discrete regions of streamwise separated flow, which were clearly indicated in the vapor-screen and oil-flow photographs.

Pittman, James L.↗

Communication variations related to leader personality

While communication and captain personality type have been separately shown to relate to overall crew performance, this study attempts to establish a link between communication and personality among 12 crews whose captains represent three pre-selected personality profiles (IE+, I-, Ec-). Results from analyzing transcribed speech from one leg of a full-mission simulation study, so far indicate several discriminating patterns involving ratios of total initiating speech (captain to crew members); in particular commands, questions and observations.

Kanki, Barbara G.↗

Detection of x ray sources in PROS

The problem of detecting discrete sources in x-ray images has much in common with the problem of automatic source detection at other wavelengths. In all cases, one searches for positive brightness enhancements exceeding a certain threshold, which appear consistent with what one expects for a point source, in the presence of a (possibly) spatially variable background. Multidimensional point spread functions (e.g., dependent on detector position and photon energy) are also common. At the same time, the problem in x-ray astronomy has some unique aspects. For example, for typical x-ray exposures in current or recent observatories, the number of available pixels far exceeds the number of actual x-ray events, so Poisson, rather than Gaussian statistics apply. Further, extended cosmic x-ray sources are common, and one often desires to detect point sources in the vicinity or even within bright, diffuse x-ray emission. Finally, support structures in x-ray detectors often cast sharp shadows in x-ray images making it necessary to detect sources in a region of rapidly varying exposure. We have developed a source detection package within the IRAF/PROS environment which attempts to deal with some of the problems of x-ray source detection. We have patterned our package after the successful Einstein Observatory x-ray source detection programs. However, we have attempted to improve the flexibility and accessibility of the functions and to provide a graphical front-end for the user. Our philosophy has been to use standard IRAF tasks whenever possible for image manipulation and to separate general functions from mission-specific ones. We will report on the current status of the package and discuss future developments, including simulation tasks, to allow the user to assess detection efficiency and source significance, tasks to determine source intensity, and alternative detection algorithms.

Deponte, J.↗

Method for Surface Texturing Titanium Products

The present invention teaches a method of producing a textured surface upon an arbitrarily configured titanium or titanium alloy object for the purpose of improving bonding between the object and other materials such as polymer matrix composites and/or human bone for the direct in-growth of orthopaedic implants. The titanium or titanium alloy object is placed in an electrolytic cell having an ultrasonically agitated solution of sodium chloride therein whereby a pattern of uniform "pock mark" like pores or cavities are produced upon the object's surface. The process is very cost effective compared to other methods of producing rough surfaces on titanium and titanium alloy components. The surface textures produced by the present invention are etched directly into the parent metal at discrete sites separated by areas unaffected by the etching process. Bonding materials to such surface textures on titanium or titanium alloy can thus support a shear load even if adhesion of the bonding material is poor.

Banks, Bruce A.↗

Experimental flowfield visualization of a high alpha wing at Mach 1.62

Experimental oil-flow and tuft patterns and vapor-screen flow-visualization data were obtained on a cambered wing model at Mach 1.62 for an angle-of-attack range of 0 to 14 deg. These data were used as flow diagnostic tools along with surface-pressure and force data and full-potential theory calculations. A large separation bubble was found on the lower wing surface at low angle of attack. The high-angle-of-attack flowfield was characterized by a large attached-flow leading-edge expansion followed by a cross-flow shock. At 14 deg, the cross-flow shock apparently induced discrete regions of streamwise separated flow which were clearly indicated in the vapor-screen and oil-flow photographs.

Pittman, James L.↗

An airborne system for vortex flow visualization on the F-18 high-alpha research vehicle

A flow visualization system for the F-18 high-alpha research vehicle is described which allows direct observation of the separated vortex flows over a wide range of flight conditions. The system consists of a smoke generator system, on-board photographic and video systems, and instrumentation. In the present concept, smoke is entrained into the low-pressure vortex core, and vortice breakdown is indicated by a rapid diffusion of the smoke. The resulting pattern is observed using photographic and video images and is correlated with measured flight conditions.

Curry, Robert E.↗

The Physics of Boiling at Burnout

The basic elements of a new experimental approach for the investigation of burnout in pool boiling are presented. The approach consists of the combined use of ultrathin (nano-scale) heaters and high speed infrared imaging of the heater temperature pattern as a whole, in conjunction with highly detailed control and characterization of heater morphology at the nano and micron scales. It is shown that the burnout phenomenon can be resolved in both space and time. Ultrathin heaters capable of dissipating power levels, at steady-state, of over 1 MW/square m are demonstrated. A separation of scales is identified and it is used to transfer the focus of attention from the complexity of the two-phase mixing layer in the vicinity of the heater to a micron-scaled microlayer and nucleation and associated film-disruption processes within it.

Theofanous, T. G.↗

Receiver Would Control Phasing of a Phased-Array Antenna

In a proposed digital signal-processing technique, a radio receiver would control the phasing of a phased-array antenna to aim the peaks of the antenna radiation pattern toward desired signal sources while aiming the nulls of the pattern toward interfering signal sources. The technique was conceived for use in a Global Positioning System (GPS) receiver, for which the desired signal sources would be GPS satellites and typical interference sources would be terrestrial objects that cause multipath propagation. The technique could also be used to optimize reception in spread-spectrum cellular-telephone and military communication systems. During reception of radio signals in a conventional phased-array antenna system, received signals at their original carrier frequencies are phase-shifted, then combined by analog circuitry. The combination signal is then subjected to down-conversion and demodulation. In a system according to the proposed technique (see figure), the signal received by each antenna would be subjected to down-conversion, spread-spectrum demodulation, and correlation; this processing would be performed separately from, and simultaneously with, similar processing of signals received by the other antenna elements. Following analog down-conversion to baseband, the signals would be digitized, and all subsequent processing would be digital. In the digital process, residual carriers would be removed and each signal would be correlated with a locally generated model pseudorandum-noise code, all following normal GPS procedure. As part of this procedure, accumulated values would be added in software and the resulting signals would be phase-shifted in software by the amounts necessary to synthesize the desired antenna directional gain pattern of peaks and nulls. The principal advantage of this technique over the conventional radio-frequency-combining technique is that the parallel digital baseband processing of the signals from the various antenna elements would be a relatively inexpensive and flexible means for exploiting the inherent multiple-peak/multiple-null aiming capability of a phased-array antenna. In the original intended GPS application, the peaks and nulls could be directed independently for each GPS signal being tracked by the GPS receiver. The technique could also be applied to other code-division multiple-access communication systems.

Dunn, Charles E.↗