Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “olivines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Composition and evolution of the eucrite parent body - Evidence from rare earth elements

Quantitative modeling of the evolution of rare earth element (REE) abundances in the eucrites, which are plagioclase-pigeonite basalt achondrites, indicates that the main group of eucrites (e.g., Juvinas) might have been produced by approximately 10% equilibrium partial melting of a single type of source region with initial REE abundances which were chondritic relative and absolute. Since the age of the eucrites is about equal to that of the solar system, extensive chemical differentiation of the eucrite parent body prior to the formation of eucrites seems unlikely. If homogeneous accretion is assumed, the bulk composition of the eucrite parent body can be estimated; two estimates are provided, representing different hypotheses as to the ratio of metal to olivine in the parent body. Since a large number of differentiated olivine meteorites, which would represent material from the interior of the parent body, have not been detected, the eucrite parent body is thought to be intact. It is suggested that the asteroid 4 Vesta is the eucrite parent body.

Consolmagno, G. J.↗

Mossbauer spectroscopy of iron in the Luna 20 regolith

Results of the Mossbauer effect measurements on Fe-57 in the average sample of the Luna 20 regolith, and their comparison with similar measurements of the Luna 16 samples are presented. Room temperature measurements of the nonmagnetic as well as magnetic components of the spectra were performed. By careful least-squares analysis, six quadrupole doublets in the inner parts of spectra were resolved. According to their splittings, they were interpreted as four types of iron in silicates (olivine, two inequivalent pyroxene sites, and a glassy fraction) and two types of nonmagnetic iron-titanium oxides (ilmenite and a spinel). Velocity-window measurements, were used to determine the average nickel content of (2.01 plus or minus 0.84) wt. %. These results are discussed in terms of distribution of iron among different phases. In comparison with the Luna 16 sample, the Luna 20 sample contains more olivine and less ilmenite as well as metal with a slightly higher nickel content.

Zemcik, T.↗

Near-opposition limb darkening of solids of planetary interest

Results are presented for a general laboratory study of the limb darkening at small phase angles of various materials of planetary interest, with particular attention given to the wavelength dependence of limb darkening. Only substances stable at room temperature were measured, including basalt, graphite, mixtures of MgO and charcoal powders, olivine, goethite, bronzite, CaCO3, MgSO4, BaSO4, limonite, and hematite. Previous studies aimed at determining the nature of limb darkening at opposition for different common materials are reviewed. It is found that the scattering properties of most particulate materials near phase zero can be described adequately by Minnaert's law, but that such a representation is totally inadequate for materials that tend to fracture into flakes with mirrorlike surfaces (e.g., bronzite and graphite). The results also indicate that materials such as olivine have scattering properties within deep absorption bands which exhibit definite departures from Minnaert's law at large angles of incidence or emission.

Veverka, J.↗

Petrology, mineralogy and chemistry of KREEP basalt

KREEP basalt is an important lunar material that was formed in large quantities early in the evolutionary history of the moon. Fragments of KREEP basalt were returned from all landing sites and make up most of the material of the Apollo 14 collection. These fragments have a wide variety of textures caused by various secondary processes but they are all characterized by a large and distinctive trace-element content. They are also characterized by a general basaltic composition that is similar to the olivine-plagioclase-pyroxene peritectic in the system silica-anorthite-olivine (Fe/Fe + Mg = 0.3).

Meyer, C., Jr.↗

Basalts from Mare Crisium

The stratified core sample returned from Mare Crisium by the Luna 24 unmanned space probe is composed primarily of a variety of subophitic to ophitic basalt with very low contents of TiO2 and MgO. This consists of clinopyroxene, calcic plagioclase, olivine, and minor amounts of silica, chromite, ulvoespinel, ilmenite, troilite, apatite, and Fe-metal. Granular metabasalts have the same bulk composition, but mineral phases exhibit less compositional variation. Fine-grained impact melts have similar compositions and are apparently derived from these basalts. It is concluded that the basalts, which are chemically distinct from the very-low-titanium basalts found elsewhere on the moon, represent the local surface flows of Mare Crisium. Sparse fragments of an olivine vitrophyre that is low in TiO2 but high in MgO and approaches the composition of the Apollo 15 green glasses may be derived from patches of dark mantling materials 20 km from the landing site.

Ryder, G.↗

Magma mixing at mid-ocean ridges - Evidence from legs 45 and 46-DSDP

An integrated petrologic and geochemical study of basalts recovered in Legs 45 and 46 (DSDP) has indicated, on the basis of disequilibrium mineralogy, that these moderately evolved basalts are mixtures of primitive mantle-derived tholeiites with more evolved magmas. Plagioclase phenocrysts are characterized by substantial diversity in composition and zoning pattern. Many olivine and plagioclase phenocrysts are too refractory to be in equilibrium with liquids of the host basalt composition but possess a composition consistent with crystallization from a primitive mantle-derived basalt liquid. On the basis of melt inclusions trapped in the olivine phenocrysts, features of the primitive melt are estimated. It is suggested that subvolcanic magma chambers beneath midocean ridges receive periodic injections of this primitive melt and its attendant phenocrysts which mix with fractionated chamber-bound magmas, resulting in observed moderately evolved lavas.

Dungan, M. A.↗

Sr-isotopic constraints on the petrogenesis of Apollo 12 mare basalts

As part of a study of Apollo 12 basalts, crystallization ages and initial Sr-87/Sr-86 (I) were determined for pigeonite basalts 12039 and 12055 and ilmenite basalt 12051. Sr-86/Sr-87 measurements for a larger suite of whole rock and plagioclase samples were obtained, and it is found that I-values for olivine and pigeonite basalts are indistinguishable while I-values for ilmenite basalts are distinctly lower. A self-consistent model for the evolution of the Sr-isotopic composition and REE abundances suggests that basalt was formed by small (2-10%) degrees of melting of cumulate sources composed of varying proportions of olivine, orthopyroxene, and clinopyroxene. This model requires nonchondritic relative abundances of the REE in the parental liquid at the time of formation of the cumulate sources. The model also describes Sr-isotopic composition and REE abundances of Apollo 17 high-Ti basalts and Apollo 15 low-Ti basalts. A lunar 'scenario' involving open system crystallization of a magma ocean from the crust downward is proposed.

Nyquist, L. E.↗

Slowly cooled microgabbros 15555 and 15065

An experimental study involving equilibration of Apollo 15 samples 15555 and 15065 in high-purity iron capsules is described. Comparison of mineral zoning trends with the experimental sequence suggests that the early crystallizing phases in the rock maintained surface equilibrium with the liquid. Olivine and pyroxene chemistry indicates that 15555 cooled slightly more rapidly than 15065, which cooled at approximately 0.2-0.3 C/day. It is suggested that 15065 and 15555 represent liquid compositions, and that these liquids appear to have been fractionated during ascent through the crust (15065), or to have been derived from an olivine-pyroxene source (15555) with Fe/(Fe + Mg) approximately equal to 0.73 at a depth between 150-200 km.

Walker, D.↗

Compositional dispersions in lunar and terrestrial basalts

The dispersions in composition observed among samples of terrestrial basalts with known field relationships are compared with those of various subgroups of lunar mare basalts. The comparison indicates that there are no substantial reasons based on trace-element data to require that large numbers of different basalts were sampled at each Apollo site. The Apollo 15 olivine and quartz normative basalts and the Apollo 12 ilmenite and olivine basalts show compositional variations which are no more pronounced than those found within single terrestrial flows, whose inhomogeneity in horizontal section has been demonstrated. The inhomogeneities of the parent rocks in the case of the Apollo 12 and 15 basalts on a scale of centimeters overshadow any differences which might exist among different general regions of the lava flows from which these samples might have derived.

Haskin, L. A.↗

Lunar electrical conductivity and magnetic permeability

Improved analytical techniques are applied to a large Apollo magnetometer data set to yield values of electroconductivity, temperature, magnetic permeability, and iron abundance. Average bulk electroconductivity of the moon is calculated to be .0007 mho/m; a rapid increase with depth to about .003 mho/m within 250 km is indicated. The temperature profile, obtained from the electroconductivity profile for olivine, indicates high lunar temperatures at relatively shallow depths. Magnetic permeability of the moon relative to its environment is calculated to be 1.008 plus or minus .005; a permeability relative to free space of 1.012 plus 0.011, minus 0.008 is obtained. Lunar iron abundances corresponding to this permeability value are 2.5 plus 2.3, minus 1.7 wt% free iron and 5.0-13.5 wt% total iron for a moon composed of a combination of free iron, olivine, and orthopyroxene.

Dyal, P.↗

Extraction processes for the production of aluminum, titanium, iron, magnesium, and oxygen and nonterrestrial sources

The suitability of existing terrestrial extractive metallurgical processes for the production of Al, Ti, Fe, Mg, and O2 from nonterrestrial resources is examined from both thermodynamic and kinetic points of view. Carbochlorination of lunar anorthite concentrate in conjunction with Alcoa electrolysis process for Al; carbochlorination of lunar ilmenite concentrate followed by Ca reduction of TiO2; and subsequent reduction of Fe2O3 by H2 for Ti and Fe, respectively, are suggested. Silicothermic reduction of olivine concentrate was found to be attractive for the extraction of Mg becaue of the technological knowhow of the process. Aluminothermic reduction of olivine is the other possible alternative for the production of magnesium. The large quantities of carbon monoxide generated in the metal extraction processes can be used to recover carbon and oxygen by a combination of the following methods: (1) simple disproportionation of CO,(2) methanation of CO and electrolysis of H2O, and (3) solid-state electrolysis of gas mixtures containing CO, CO2, and H2O. The research needed for the adoption of earth-based extraction processes for lunar and asteroidal minerals is outlined.

D Bhogeswara Rao↗

Laboratory analogues to cosmic dust

Results are reported for a study of the condensation of a number of solids that are likely candidates for dust formed in astronomical environments. The condensate materials were produced by vaporizing a portion of a solid target of chosen composition by a laser pulse in an atmosphere of H2, O2, or Ar at 1 atm pressure. The systems studied include olivine, pyroxene, Fe-Ni alloy, Al2O3, carbon, CaCO3, SiC, Au-olivine powders, and Au-Al2O3 powders. Possible relations among the sizes, chainlike structures, and chemistries of the condensates and of grains formed in astronomical systems are investigated. The results indicate that the laser evaporation technique is useful for providing a wide variety of grain systems that are analogous to astronomical grain systems and that the grain materials produced are useful for spectral studies of materials believed to exist in astronomical environments, both as single materials and as multicomponent grain systems

Stephens, J. R.↗

Evidence for a high-magnesium subsurface basalt in Mare Crisium from orbital X-ray fluorescence data

Orbital X-ray fluorescence data taken by the Apollo 15 mission over Mare Crisium are analyzed in order to detect surface occurrences of the magnesium-rich materials found in the Luna 24 core sample. Apollo 15 data of the surface soils of the Luna 24 landing site, expressed as Al/Si and Mg/Si ratios, are found to be well correlated with the composition of the less than 74 micron fraction of the core sample. Orbital data indicate that most surface areas of the southern part of Mare Crisium have magnesium contents lower than or equal to that of the landing site, with the exception of areas in the vicinities of the post-mare craters Picard and Pierce and an area northeast of the Luna 24 site. The crater material is interpreted to be a magnesium-rich subsurface basalt excavated by crater formation, which may represent the material from which magnesium-rich Luna 24 samples, including olivine gabbro and olivine vitrophyre, were derived.

Andre, C. G.↗

Luna 24: 90-150 micrometer fraction - Implications for remote sampling of regolith

An analysis of the mineral grains and glasses found in the 90 to 150 micron fraction of the Luna 24 core sample is presented and implications for the automatic collection of planetary and asteroidal regoliths are discussed. Electron microprobe analysis for pyroxene, olivine, plagioclase, opaque minerals and glass in samples at various depths indicate that polymineralic grains have compositions similar to those of gabbroic and basaltic fragments from coarser samples, while monomineralic grains contain an additional population of Mg-rich olivines and pyroxene. Most of the glasses are found to be related to mare basalts or local regolith, with nonmare material represented by glasses of highland basalt and low K Fra Mauro composition. It is concluded that as regards mineralogy and petrology, a single grab sample would have been as useful and a series of grab samples on a long traverse would have been more useful than the Luna 24 core sample, with the fine sample being more informative than the coarse.

Papp, H. A.↗

Mineralogy and petrology of basaltic fragments from the Luna 24 drill core

The petrology of rock fragments and monomineralic grains from Luna 24 samples is described, and a petrogenetic scheme for the derivation of Mare Crisium basalts is presented. Components of the rock fragments include subophitic basalts, metabasalts, late-stage fragments, olivine vitrophyres, and non-mare lithic fragments of possible cumulate origin. Among the monomineralic grains (which are much more abundant than the rock fragments) are pyroxene, plagioclase, olivine, ilmenite and native Fe.

Coish, R. A.↗

Melt inclusions in Luna 24 soil fragments

Optical examinations of 28 slides of Luna 24 soil fragments revealed melt inclusions in grains of olivine, plagioclase, spinel, and ilmenite as well as interstitial inclusions. In contrast with Apollo samples, the Luna 24 samples contain sulfide melt inclusions, which indicates that saturation with respect to an iron sulfide melt took place throughout much of the crystallization history, even while olivine was crystallizing. The Luna 24 silicate-melt inclusions have recorded a more extensive differentiation toward higher iron magmas than have the Apollo inclusions, but they have also recorded some inexplicably low aluminum values.

Roedder, W.↗

Causes of compositional variations within mare basalt suites

The short-range unmixing model, which explains compositional variations produced during crystallization of a single undifferentiated basalt flow, has been applied to the variations found within each of the suites of mare basalts. Based on this modelling, the following suites of mare basalts could represent random samples from single, undifferentiated lava flows: Apollo 11 A (high K), Apollo 15 olivine, Apollo 17 A-U, Apollo 17 B, Apollo 17 C. The short range unmixing model fails to account for variations within the Apollo 12 olivine-pigeonite group and Apollo 12 ilmenite group, which are well explained by fractional crystallization. The fact that the compositional variations within a suite of samples of unknown affinity can be explained in terms of short-range unmixing of a single lava does not mean that they are necessarily related in that way. It does, however, mean that independent evidence (stratigraphic, petrographic, isotropic, or age) is required to support arguments for the variations being caused by fraction crystallization or different magma batches.

Lindstrom, M. M.↗

Occurrence and mineral chemistry of high pressure phases, Portrillo basalt, southcentral New Mexico

Inclusions of clinopyroxenite, kaersutiteclinopyroxenite, kaersutite-rich inclusions, wehrlite and olivine-clinopyroxenite together with megacrysts of feldspar, kaersutite and spinel are found loose on the flanks of cinder cones, as inclusions within lava flows and within the cores of volcanic bombs in the Quaternary alkali-olivine basalt of the West Potrillo Mountains, southcentral New Mexico. Based on petrological and geochemical evidence the megacysts are interpreted to be phenocrysts which formed at great depth rather that xenocrysts of larger crystal aggregates. These large crystals are believed to have formed as stable phases at high temperature and pressure and have partially reacted with the basalt to produce subhedral to anhedral crystal boundaries. It can be demonstrated that the mafic and ultramafic crystal aggregates were derived from an alkali-basalt source rock generated in the mantle. The inclusions are believed to represent a cumulus body or bodies injected within the lower crust or upper mantle.

Hoffer, J. M.↗