Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “material toxicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Study of Rapid-Regression Liquefying Hybrid Rocket Fuels

A report describes experiments directed toward the development of paraffin-based hybrid rocket fuels that burn at regression rates greater than those of conventional hybrid rocket fuels like hydroxyl-terminated butadiene. The basic approach followed in this development is to use materials such that a hydrodynamically unstable liquid layer forms on the melting surface of a burning fuel body. Entrainment of droplets from the liquid/gas interface can substantially increase the rate of fuel mass transfer, leading to surface regression faster than can be achieved using conventional fuels. The higher regression rate eliminates the need for the complex multi-port grain structures of conventional solid rocket fuels, making it possible to obtain acceptable performance from single-port structures. The high-regression-rate fuels contain no toxic or otherwise hazardous components and can be shipped commercially as non-hazardous commodities. Among the experiments performed on these fuels were scale-up tests using gaseous oxygen. The data from these tests were found to agree with data from small-scale, low-pressure and low-mass-flux laboratory tests and to confirm the expectation that these fuels would burn at high regression rates, chamber pressures, and mass fluxes representative of full-scale rocket motors.

Zilliac, Greg↗
DOE OSTI2023

Roll-to-roll solvent-free manufactured electrodes for fast-charging batteries

In response to the growing demand for lithium-ion batteries (LIBs), we demonstrate a solvent-free manufacturing technology that can avoid toxic organic solvents and form unique electrode structures to overcome the bottlenecks in low costs and fast charging. The lower tortuosity achieved by the open pores in the dry-printed (DP) electrode allows for a shorter Li+ diffusion pathway, which leads to better rate performance. The DP pouch cells exhibit higher capacity retention of 78% and 69% at 3C and 4C, respectively, compared with 67% and 52% for the slurry cast (SL) cells at the same rates. Moreover, the coating layer on the surface of active materials prevents the excess side reaction between active materials and electrolytes, which prolongs the cycle life of the DP cells. This manufacturing process is a roll-to-roll system with immense potential to be scaled up, providing a more efficient and economical way for battery manufacturing.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Studies with the USF/NASA toxicity screening test method - Exercise wheels and oxygen replenishment

Continuing efforts to improve the University of San Francisco/NASA toxicity screening test method have included the addition of exercise wheels to provide a different measure of incapacitation, and oxygen replenishment to offset any effect of oxygen depletion by the test animals. The addition of exercise wheels limited the number of animals in each test and doubled the required number of tests without any significant improvement in reproducibility. Oxygen replenishment appears to have an effect on survival in the last 5 minutes of the 30-minute test, but the effect is expected to be similar for most materials.

Hilado, C. J.↗
NASA NTRS2005

Nanostructured MnO2-Based Cathodes for Li-Ion/Polymer Cells

Nanostructured MnO2-based cathodes for Li-ion/polymer electrochemical cells have been investigated in a continuing effort to develop safe, high-energy-density, reliable, low-toxicity, rechargeable batteries for a variety of applications in NASA programs and in mass-produced commercial electronic equipment. Whereas the energy densities of state-of-the-art lithium-ion/polymer batteries range from 150 to 175 W h/kg, the goal of this effort is to increase the typical energy density to about 250 W h/kg. It is also expected that an incidental benefit of this effort will be increases in power densities because the distances over which Li ions must diffuse through nanostructured cathode materials are smaller than those through solid bulk cathode materials.

Skandan, Ganesh↗
DOE OSTI2023

A substituent-dependent deep-blue pyrene-based chemosensor for trace nitroaniline sensing

Nitroaniline (NA) is a kind of high toxicity and pathogenic amine derivative, and the trace monitoring of nitroaniline has become an urgent problem in terms of both the environment and security. Herein, two K-region multiple substituted pyrene-based luminogens with reasonable photoluminescence efficiency and blue emission (408–430 nm) have been synthesized and characterized. Their photophysical properties were carefully investigated in solution and in the solid state by experimental and density functional theory (DFT) methods. It is worth mentioning that both of these π-electron rich and extended π-conjugated materials were used for the detection of electron deficient nitroaromatics (NACs) based on a photo-induced electron transfer (PET) mechanism, and a sensitive response towards NA, especially for p-NA with a limit of detection (LOD) as low as 8.58 × 10 -9 M, was observed, with a fluorescence quenching efficiency up to 99.5%. In conclusion, these research results provided a low-cost and simple strategy for trace nitroaniline sensing.

36 MATERIALS SCIENCE↗
NASA NTRS2001

System Report for the Optical Properties Monitor (OPM) Experiment

This systems report describes how the Optical Properties Monitor (OPM) experiment was developed. Pertinent design parameters are discussed, along with mission information and system requirements to successfully complete the mission. Environmental testing was performed on the OPM to certify it for spaceflight. This testing included vibration, thermal vacuum, electromagnetic interference and conductance, and toxicity tests. Instrument and monitor subsystem performances, including the reflectometer, vacuum ultraviolet, total integrated scatter, atomic oxygen monitor, irradiance monitor, and molecular contamination monitor during the mission are discussed. The OPM experiment was launched aboard the Space Shuttle on mission STS-81 in January 1997 and transferred to the Mir space station. An extravehicular activity (EVA) was performed in April 1997 to attach the OPM experiment to the outside of the Mir/Shuttle Docking Module for space environment exposure. The OPM conducted in situ measurements of a number of material samples. These data may be found in the OPM Science Report. OPM was retrieved during an EVA in January 1998 and was returned to Earth on board the Space Shuttle on mission STS-89.

Hummer, L.↗
DOE OSTI2020

Advances in PFAS Monitoring and Remediation Using a Functionalized Material Approach

The growing global concerns about the effects to public health from human exposure to per- and polyfluoroalkyl substances (PFAS) motivates the development of strategies for reliable monitoring of PFAS in environmental streams, as well as for their rapid, effective removal if detected. For the continuous PFAS monitoring, an inexpensive, field-deployable, in situ sensor is urgently needed; yet the prevalent in situ techniques often struggle to strike a balance between the practical sensitivity and selectivity demands of the real world. Similarly, for effective PFAS removal, strategies for their fast, selective, and quantitative capture are desired, yet the present commercially available sorbents are unable to meet the requirements of rapid, quantitative capture of all PFAS components, and are notably inefficient in removing the more toxic smaller chains. To address these twin challenges, Pacific Northwest National Laboratory is developing strategies for improved detection and remediation of PFAS. For the rapid, selective, quantitative removal of PFAS from environmental streams, the strategy relies on designing capture probes with exclusively tailored electronic and spatial affinities for the PFAS that are able to selectively capture them from environmental streams. For the in situ detection and quantification of PFAS in complex, multicomponent matrices such as groundwater, the approach relies on the targeted capture of specific PFAS by these PFAS-specific capture probes immobilized on a platform. The platform acts as an electrode to directly measure PFAS concentration through a proportional change in electrical response upon their capture. A combination of optimization of platform design and incorporation of additional, sensitive detection modalities have allowed us to achieve detection limits as low as 0.5 ng/L for detection of PFAS compounds (compared to the 70 ng/L Health Advisory Limit of the U.S. Environmental Protection Agency).

Per- and poly-fluorinated alkyl substances (PFAS),↗
DOE OSTI2020

Advances in PFAS Monitoring and Remediation Using a Functionalized Material Approach - 20080

The growing global concerns about the effects to public health from human exposure to per- and polyfluoroalkyl substances (PFAS) motivates the development of strategies for reliable monitoring of PFAS in environmental streams, as well as for their rapid, effective removal if detected. For the continuous PFAS monitoring, an inexpensive, field-deployable, in situ sensor is urgently needed; yet the prevalent in situ techniques often struggle to strike a balance between the practical sensitivity and selectivity demands of the real world. Similarly, for effective PFAS removal, strategies for their fast, selective, and quantitative capture are desired, yet the present commercially available sorbents are unable to meet the requirements of rapid, quantitative capture of all PFAS components, and are notably inefficient in removing the more toxic smaller chains. To address these twin challenges, Pacific Northwest National Laboratory is developing strategies for improved detection and remediation of PFAS. For the rapid, selective, quantitative removal of PFAS from environmental streams, the strategy relies on designing capture probes with exclusively tailored electronic and spatial affinities for the PFAS that are able to selectively capture them from environmental streams. For the in situ detection and quantification of PFAS in complex, multicomponent matrices such as groundwater, the approach relies on the targeted capture of specific PFAS by these PFAS-specific capture probes immobilized on a platform. The platform acts as an electrode to directly measure PFAS concentration through a proportional change in electrical response upon their capture. A combination of optimization of platform design and incorporation of additional, sensitive detection modalities have allowed us to achieve detection limits as low as 0.5 ng/L for detection of PFAS compounds (compared to the 70 ng/L Health Advisory Limit of the U.S. Environmental Protection Agency). (authors)

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Biocontainment of Genetically Engineered Algae

Algae (including eukaryotic microalgae and cyanobacteria) have been genetically engineered to convert light and carbon dioxide to many industrially and commercially relevant chemicals including biofuels, materials, and nutritional products. At industrial scale, genetically engineered algae may be cultivated outdoors in open ponds or in closed photobioreactors. In either case, industry would need to address a potential risk of the release of the engineered algae into the natural environment, resulting in potential negative impacts to the environment. Genetic biocontainment strategies are therefore under development to reduce the probability that these engineered bacteria can survive outside of the laboratory or industrial setting. These include active strategies that aim to kill the escaped cells by expression of toxic proteins, and passive strategies that use knockouts of native genes to reduce fitness outside of the controlled environment of labs and industrial cultivation systems. Several biocontainment strategies have demonstrated escape frequencies below detection limits. However, they have typically done so in carefully controlled experiments which may fail to capture mechanisms of escape that may arise in the more complex natural environment. The selection of biocontainment strategies that can effectively kill cells outside the lab, while maintaining maximum productivity inside the lab and without the need for relatively expensive chemicals will benefit from further attention.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1985

Seeding subsonic, transonic and supersonic flows with 0.5 micron polystyrene spheres

Polystyrene latex particles have been successfully used as laser velocimetry seed material for flows in the Ames High Reynolds Channels (HR) 1 and 2, the pilot channel, and the one-foot low speed tunnel. These facilities provide test flows with Mach numbers from 0.1 to 3.0 and test section sizes from 4 inches by 6 inches to 18 inches by 24 inches. Tunnel mass flow in the HR-2 channel can approach 1000 lb/sec. The latex particles have the following favorable characteristics: size of 0.35 to 0.55 microns diameter; spherical shape; specific gravity of 1.05; excellent flow trackability; low toxicity; and low cost. they have the disadvantage of being packaged as an aqueous suspension which must be diluted and introduced into the test flow as an atomized mist. This must occur sufficiently far upstream of the test section to minimize flow disturbances and permit the liquid mist to evaporate before reaching the model. Several techniques which have been developed to accomplish satisfactory seeding will be described.

Seegmiller, H. L.↗
NASA NTRS2013

Assessing Habitability: Lessons from the Phoenix Mission

The Phoenix mission's key objective was to search for a habitable zone. The Phoenix lander carried a robotic arm with digging scoop to collect soil and icy material for analysis with an instrument payload that included volatile mineral and organic analysis(3) and soil ionic chemistry analysis (4). Results from Phoenix along with theoretical modeling and other previous mission results were used to evaluate the habitability of the landing site by considering four factors that characterize the environments ability to support life as we know it: the presence of liquid water, the presence of an energy source to support metabolism, the presence of nutrients containing the fundamental building blocks of life, and the absence of environmental conditions that are toxic to or preclude life. Phoenix observational evidence for the presence of liquid water (past or present) includes clean segregated ice, chemical etching of soil grains, calcite minerals in the soil and variable concentrations of soluble salts5. The maximum surface temperature measured was 260K so unfrozen water can form only in adsorbed films or saline brines but warmer climates occur cyclically on geologically short time scales due to variations in orbital parameters. During high obliquity periods, temperatures allowing metabolism extend nearly a meter into the subsurface. Phoenix discovered ~1%w/w perchlorate salt in the soil, a chemical energy source utilized by a wide range of microbes. Nutrient sources including C, H, N, O, P and S compounds are supplied by known atmospheric sources or global dust. Environmental conditions are within growth tolerance for terrestrial microbes. Summer daytime temperatures are sufficient for metabolic activity, the pH is 7.8 and is well buffered and the projected water activity of a wet soil will allow growth. In summary, martian permafrost in the north polar region is a viable location for modern life. Stoker et al. presented a formalism for comparing the habitability of various regions visited to date on Mars that involved computing a habitability probability, defined as the product of probabilities for the presence of liquid water (P(sub lw)), energy (P(sub e)), nutrients (P(sub ch)), and a benign environment (P(sub b)). Using this formalism, they argued that the Phoenix site was the most habitable of any site visited to date by landed missions and warranted a follow up mission to search for modern evidence of life. This paper will review that conclusion in view of more recent information from the Mars Exploration Rovers and Mars Science Lander missions.

Stoker, Carol R.↗
DOE OSTI2022

Chapter 1.18 - The Promise of Perovskite Solar Cells

Perovskite solar cells (PSCs) based on a new class of semiconductors - organic and inorganic hybrid halide perovskites - have emerged as a disruptive photovoltaic (PV) technology that is potentially cost-effective, scalable, and highly efficient, with an expectation for future deployment at terawatt scale. This new PV technology has drawn significant R&D attention from academics and industries as an alternate to compete with traditional PV technologies to help mitigate challenges associated with global energy demand. The synthesis of the hybrid halide perovskites was reported in the 1970s. The structural knowledge, solution processing and optoelectronic characteristics of this hybrid material family were further studied in the 1990s. It is until 2009-2012 when the use of methylammonium lead triiodide (MAPbI3) was first demonstrated in PV cells worldwide researchers have started to show a general interest in using hybrid halide perovskites for PV and other optoelectronic applications.

perovskite↗
DOE OSTI2025

Bandgap engineering of SrZrS 3 chalcogenide perovskite via substitutional doping for photovoltaic applications: a first-principles DFT study

Strontium zirconium sulfide (SrZrS 3 ) has garnered significant attention for photovoltaic (PV) applications due to its excellent optoelectronic properties, high chemical and moisture stability, and non-toxicity. However, the bandgaps of both the α- and β-phases lie outside the optimum ranges for both single-junction solar cells (SJSCs) and tandem solar cells (TSCs), thereby limiting their applications in PV technologies. In this study, we employed hybrid density functional theory to engineer the band gaps of α- and β-SrZrS 3 through substitutional doping. We considered three dopants (Hf, Sn, and Ti) at the Zr site of SrZrS 3 with varying doping concentrations and investigated their effects on the structural, electronic, and optical properties of the materials. We found that Sn and Ti doping effectively lowers the band gaps of both α- and β-SrZrS 3 , whereas Hf doping increases them. For x values up to 0.25, the band gaps of the α-SrZr 1−x Sn x S 3 and α-SrZr 1−x Ti x S 3 are within the optimum range for SJSCs, and those of β-SrZr 1−x Sn x S 3 and β-SrZr 1−x Ti x S 3 lie within the optimum range for Si/perovskite as well as perovskite/perovskite TSCs. The three dopants exhibited significant effects on the optical properties of both α- and β-SrZrS 3 , including the absorption coefficient, energy-loss functions, reflectivity, and refractivity spectra. Thermodynamic stability analysis revealed that for both phases, SrZr 1−x Hf x S 3 can be synthesized via exothermic processes, whereas the formation of SrZr 1−x Ti x S 3 and SrZr1−xSn x S 3 is endothermic and hence, not thermodynamically favorable. Further analysis showed that SrZr 1−x Ti x S 3 in both α- and β-phases are stable under thermodynamic equilibrium conditions, whereas SrZr 1−x Sn x S 3 is prone to dissociation into ternary phases (SrZrS 3 and SrSnS 3 ), especially at higher doping concentrations. These results show that Ti doping is effective in tuning the band gaps of α- and β-SrZrS 3 toward the optimal values for PV applications.

14 SOLAR ENERGY↗
DOE OSTI2023

Rapid and robust squashed spore/colony PCR of industrially important fungi

Fungi have been utilized for centuries in medical, agricultural, and industrial applications. Development of systems biology techniques has enabled the design and metabolic engineering of these fungi to produce novel fuels, chemicals, and enzymes from renewable feedstocks. Many genetic tools have been developed for manipulating the genome and creating mutants rapidly. However, screening and confirmation of transformants remain an inefficient step within the design, build, test, and learn cycle in many industrial fungi because extracting fungal genomic DNA is laborious, time-consuming, and involves toxic chemicals. In this study we developed a rapid and robust technique called “Squash-PCR” to break open the spores and release fungal genomic DNA as a template for PCR. The efficacy of Squash-PCR was investigated in eleven different filamentous fungal strains. Clean PCR products with high yields were achieved in all tested fungi. Spore age and type of DNA polymerase did not affect the efficiency of Squash-PCR. However, spore concentration was found to be the crucial factor for Squash-PCR in Aspergillus niger, with the dilution of starting material often resulting in higher PCR product yield. We then further evaluated the applicability of the squashing procedure for nine different yeast strains. We found that Squash-PCR can be used to improve the quality and yield of colony PCR in comparison to direct colony PCR in the tested yeast strains. The developed technique will enhance the efficiency of screening transformants and accelerate genetic engineering in filamentous fungi and yeast.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Hydrazine-free precursor for solution-processed all-inorganic Se and Se 1− x Te x photovoltaics

Selenium (Se) has reemerged as a promising absorber material for indoor and tandem photovoltaics (PVs), and its alloys with Te (Se 1−x Te x ) offer a widely tunable bandgap. Solution processing of this materials system offers a route to low-cost fabrication. However, solution processing of Se has, thus far, only used hydrazine, which is an extremely hazardous solvent. In this work, we prepare and isolate propylammonium poly-Se and poly-Se–Te precursors from a safer thiol-amine solvent system. We formulate molecular inks by dissolving the precursor in dimethylformamide (DMF) with a monoethanolamine (EA) additive and process high-quality Se and Se 1−x Te x films with bandgaps ranging from 1.20 eV to 1.86 eV. We fabricate PVs from these films using TiO 2 and MoO 3 charge transport layers (CTLs) to achieve power conversion efficiencies as high as 2.73% for Se and 2.33% for Se 0.7 Te 0.3 under solar simulation. Se devices show excellent stability with no degradation after 1 month in air, enabled by the excellent stability of Se and the use of inorganic CTLs. This work represents an important step towards low-cost solution-phase processing of Se and Se 1−x Te x alloys for PVs and photodetectors with low toxicity and high bandgap tunability.

36 MATERIALS SCIENCE↗
NASA NTRS1995

FTIR instrumentation to monitor vapors from Shuttle tile waterproofing materials

The Space Shuttle Thermal Protection System (TPS) tiles and blankets are waterproofed using DimethylEthoxySilane (DMEX) in the Orbiter Processing Facilities (OPF). DMES has a Threshold Limit Value (TLV) for exposure of personnel to vapor concentration in air of 0.5 ppm. The OPF high bay cannot be opened for normal work after a waterproofing operation until the DMES concentration is verified by measurement to be below the TLV. On several occasions the high bay has been kept closed for up to 8 hours following waterproofing operations due to high DMES measurements. In addition, the Miran 203 and Miran 1 BX infrared analyzers calibrated at different wavelengths gave different readings under the same conditions. There was reason to believe that some of the high DMES concentration readings were caused by interference form water and ethanol vapors. The Toxic Vapor Detection Laboratory (TVDL) was asked to test the existing DMES instruments and identify the best qualified instrument. In addition the TVDL was requested to develop instrumentation to ensure the OPF high bay could be opened safely as soon as possible after a waterproofing operation. A Fourier Transform Infrared (FTIR) spectrophotometer instrument developed for an earlier project was reprogrammed to measure DMES vapor along with ethanol, water, and several common solvent vapors. The FTIR was then used to perform a series of laboratory and field tests to evaluate the performance of the single wavelength IR instruments in use. The results demonstrated that the single wavelength IR instruments did respond to ethanol and water vapors, more or less depending on the analytical IR wavelength selected. The FTIR was able to separate the responses to DMES, water and ethanol, and give consistent readings for the DMES vapor concentration. The FTIR was then deployed to the OPF to monitor real waterproofing operations. The FTIR was also used to measure the time for DMES to evaporate from TPS tile under a range of humidity conditions in controlled laboratory tests. The combination of laboratory and field tests with the FTIR instrument demonstrated superior sensitivity, ability to reject interference from water and ethanol vapors, ruggedness to be transported from the lab to the OPF and set up without special procedures or degradation of performance. The multiple component vapor analysis algorithm was developed at KSC and incorporates automatic baseline correction and shape fitting of the spectra. The analysis for DMES, TetraMethylDiSiloxane (TMDS), ethanol, methanol, isopropanol, and baseline parameters uses 161 points per sample at 4 cm(exp -1) resolution, and processes an eight scan sample every ten seconds. The standard deviation of the measurements is 0.013 ppm and the upper linear limit is 125 ppm DMES. Based on successful demonstration of capabilities we produced three mobile instrument carts to be used in each OPF to support future waterproofing operations. The design and building of the 'DMES Carts' were accomplished in Fiscal year 1995.

Mattson, C. B.↗
NASA NTRS1994

Efficient, full-spectrum, long-lived, non-toxic microwave lamp for plant growth

Fusion Systems Corporation has developed a mercury-free, low infrared, efficient microwave lamp using a benign sulfur based fill optimized for visible light. Our literature search and discussions with researchers directed us to enhance the bulbs red output. We have demonstrated a photosynthetic efficacy of over 2 micro-moles per microwave joule which corresponds to over 1.3 micro-moles per joule at the power main. Recent work has shown we can make additional increases in overall system efficiency. During the next two years, we expect to demonstrate a system capable of producing more than 1.5 micro-moles/joule measured at the power main with significantly less IR than alternative lamp systems. We determined optimal plant growth light requirements via a literature search and researcher input. We surveyed candidate lamp fill materials to be used in combination with sulfur and explored several methods of increasing photosynthetic efficacy.

Maclennan, Donald A.↗