SEARCH · Engineering Papers
Results for “interface resistance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abisko: Deep codesign of an architecture for spiking neural networks using novel neuromorphic materials
The Abisko project aims to develop an energy-efficient spiking neural network (SNN) computing architecture and software system capable of autonomous learning and operation. The SNN architecture explores novel neuromorphic devices that are based on resistive-switching materials, such as memristors and electrochemical RAM. Equally important, Abisko uses a deep codesign approach to pursue this goal by engaging experts from across the entire range of disciplines: materials, devices and circuits, architectures and integration, software, and algorithms. Here, the key objectives of our Abisko project are threefold. First, we are designing an energy-optimized high-performance neuromorphic accelerator based on SNNs. This architecture is being designed as a chiplet that can be deployed in contemporary computer architectures and we are investigating novel neuromorphic materials to improve its design. Second, we are concurrently developing a productive software stack for the neuromorphic accelerator that will also be portable to other architectures, such as field-programmable gate arrays and GPUs. Third, we are creating a new deep codesign methodology and framework for developing clear interfaces, requirements, and metrics between each level of abstraction to enable the system design to be explored and implemented interchangeably with execution, measurement, a model, or simulation. As a motivating application for this codesign effort, we target the use of SNNs for an analog event detector for a high-energy physics sensor.
Low resistance p-type contacts to monolayer WSe2 through chlorinated solvent doping
Tungsten diselenide (WSe 2 ) is a promising p-type semiconductor limited by high contact resistance (R C ) and the lack of a reliable doping strategy. Here, we demonstrate that exposing WSe 2 to chloroform provides simple and stable p-type doping. In monolayer WSe 2 transistors with Pd contacts, chloroform increases the maximum hole current by over 100× (>200 µA/µm), reduces R C to ~ 2.5 kΩ·μm, and retains an on/off ratio of 10 10 at room temperature. These improvements persist for over 8 months, survive a 150 °C thermal anneal, and remain effective down to 10 K, enabling a cryogenic R C of ~ 1 kΩ·μm. Density functional theory indicates that chloroform strongly physisorbs to WSe 2 , inducing hole doping with minimal impact on the electronic states between the valence band and conduction band edges. Auger electron spectroscopy and atomic force microscopy suggest that chloroform intercalates at the WSe 2 interface with the gate oxide, contributing to doping stability and mitigating interfacial dielectric disorder, though further studies are needed to conclusively confirm this mechanism. This robust, scalable approach enables high-yield WSe 2 transistors with good p-type performance.
Mechanistic insight into the effects of A-site doping in perovskite nanorods on interfacial Li-ion and Na-ion transport in polymer–perovskite composite electrolytes
Composite polymer electrolytes (CPEs) offer a promising pathway to safer and higher energy density electrochemical energy storage yet optimizing interfacial ion transport remains a critical challenge due to high resistances and a lack of understanding of the complex interfacial electrostatic interactions. This work investigates the mechanistic origins of the interfacial ion transport enhancement in single-ion conducting (SIC) polymer electrolytes filled with A-site disordered perovskite LaxMyTiOz (LMTO) (M = Li, Na, K) nanorods. By integrating Density Functional Theory (DFT) with broadband dielectric spectroscopy (BDS) and pulsed-field-gradient NMR (PFG-NMR), we analyze the ion transport behavior in Li-based and Na-based SIC systems containing compositionally distinct LMTO fillers (LMTO800 and LMTO900). Specifically, we introduce the site-to-site energy difference (ΔE) descriptor, which extends beyond single-site descriptors such as adsorption energy and ion binding energies. We demonstrate that ΔE together with ion binding energies provide a more comprehensive picture of the energy landscape at the polymer–ceramic interface. The combined DFT and experimental results show that A-site doping in the ceramic filler can effectively modulate ΔE and ion binding energies, creating a favorable potential energy landscape that promotes enhanced ion transport along the interface. This comprehensive study illustrates the impact of ceramic compositional tuning on interfacial ion transport and provides materials design rules towards real-world applications.
Enhanced Radiation Damage Tolerance of Amorphous Interphase and Grain Boundary Complexions in Cu-Ta
Amorphous interfacial complexions are particularly resistant to radiation damage and have been primarily studied in alloys with good glass-forming ability, yet recent reports suggest that these features can form even in immiscible alloys such as Cu-Ta under irradiation. In this work, the mechanisms of damage production and annihilation due to primary knock-on atom collisions are investigated for amorphous interphase and grain boundaries in a Cu-Ta alloy using atomistic simulations. Amorphous complexions, in particular amorphous interphase complexions that separate Cu and Ta grains, result in less residual defect damage than their ordered counterparts. Stemming from the nanophase chemical separation in this alloy, the amorphous complexions exhibit a highly heterogeneous distribution of atomic excess volume, as compared to a good glass former like Cu-Zr. Complexion thickness, a tunable structural descriptor, plays a vital role in damage resistance. Thicker interfacial films are more damage-tolerant because they alter the defect production rate due to differences in intrinsic displacement threshold energies during the collision cascade. Overall, the findings of this work highlight the importance of interfacial engineering in enhancing the properties of materials operating in radiation-prone environments and the promise of amorphous complexions as particularly radiation damage-tolerant microstructural features.
Ionic Peltier effect in Li-ion electrolytes
The coupled transport of charge and heat provide fundamental insights into the microscopic thermodynamics and kinetics of materials. We describe a sensitive ac differential resistance bridge that enables measurements of the temperature difference on two sides of a coin cell with a resolution of better than 10 μK. We use this temperature difference metrology to determine the ionic Peltier coefficients of symmetric Li-ion electrochemical cells as a function of Li salt concentration, solvent composition, electrode material, and temperature. The Peltier coefficients Π are negative, i.e., heat flows in the direction opposite to the drift of Li ions in the applied electric field, large, –Π > 30 kJ mol –1 , and increase with increasing temperature at T > 300 K. The Peltier coefficient is approximately constant on time scales that span the characteristic time for mass diffusion across the thickness of the electrolyte, suggesting that heat of transport plays a minor role in comparison to the changes in partial molar entropy of Li at the interface between the electrode and electrolyte. Here, our work demonstrates a new platform for studying the non-equilibrium thermodynamics of electrochemical cells and provides a window into the transport properties of electrochemical materials through measurements of temperature differences and heat currents that complement traditional measurements of voltages and charge currents.
Dual-precipitates enhance fatigue resistance in an additively manufactured high-entropy alloy
To accomplish the intense desire of high-strength materials for enhanced energy-efficiency, recent research applies a combined strategy of additive-manufacturing and precipitation-strengthening in high entropy alloys. In a context, Al 0.2 Co 1.5 CrFeNi 1.5 Ti 0.3 nanoprecipitation-strengthened system was developed, demonstrating very convincing strength and toughness. Moreover, additive-manufacturing facilitated additional strength by well-decorated cell-boundaries with blocky L2 1 precipitates and homogeneously distributed L1 2 precipitates. However, fatigue research of this alloy remained unexplored despite being the main precursor for structural applications. In this study low-cycle fatigue behavior of this alloy in both as-built and precipitation-strengthened (aged) conditions has been explored, combined with in-situ neutron diffraction investigation. Findings revealed a substantial cyclic-stress profile and a notable fatigue-life below ±0.50% strain-amplitude, exceeding 10 5 cycles at ±0.30% strain-amplitude. These demonstrate the potential to carry higher payloads with marked engineering-reliability. Residual-stress estimation revealed strain-compatibility between the matrix and L1 2 precipitate, indicating a crack-initiation immune interface. A comparative examination of dislocation character revealed shifting towards pure edge-character in aged alloy indicates precipitates promoted planar-slip during deformation.
Resistive Switching of Spinel Li 4 Ti 5 O 12 Lithium-Ion Battery Material for Neuromorphic Computing
The rapid rise of AI has exposed significant limitations in conventional Von Neumann computing architecture, particularly in regard to speed and energy efficiency. To address these challenges, researchers are exploring a brain-inspired neuromorphic architecture that mimics biological neural networks, enabling massive parallel processing with reduced power consumption for complex AI computational demands. Recent interest has focused on utilizing battery electrodes and solid electrolyte materials for their resistive switching properties in developing a neuromorphic architecture. These properties are precisely tuned through local- and bulk-level chemical composition modifications via voltage bias stimuli. In this study, we demonstrate fabricating a three-terminal lithium-ion electrochemical transistor based on lithium titanium oxide (Li 4 Ti 5 O 12 ), a popular lithium-ion battery anode material. We deposited and characterized LTO thin films using RF sputtering, demonstrating a 6 orders of magnitude increase in electronic conductivity upon lithiation, with conductivity plateauing after 20% lithiation. Density functional theory calculations revealed transformation from the insulating to conducting state, supported by experimental characterization through X-Ray Photoelectron Spectroscopy (XPS) and Direct Current (DC) polarization analyses. The fabricated transistor consisted of LTO as the channel layer, gold as source/drain terminals, lithium phosphorus oxynitride (LiPON) as the lithium-ion conductor, and copper as the gate terminal. The device exhibited clear hysteresis in transfer characteristics due to lithium insertion/extraction processes. Long-term potentiation (LTP) and long-term depression (LTD) measurements showed an asymmetric ratio of 1.425 and maximum/minimum conductance ratio of 7.83. When implemented in a deep neural network (DNN) for MNIST handwritten digit recognition, the device achieved 92.03% accuracy over 20 training epochs. Detailed transport mechanism analysis revealed the crucial role of oxygen vacancies and interface effects in device operation. Our preliminary findings establish LTO-based lithium-ion electrochemical transistors as promising candidates for energy-efficient neuromorphic computing applications, offering potential solutions to traditional Von Neumann architecture limitations.
Advances in the Co-Simulation of Detailed Electrical and Whole-Building Energy Performance
This article describes recent co-simulation advances for the simultaneous modeling of detailed building electrical distribution systems and whole-building energy performance. The co-simulation architecture combines the EnergyPlus® engine for whole-building energy modeling with a new Modelica library for building an electrical distribution system model that is based on harmonic power flow. This new library allows for a higher-fidelity modeling of electrical power flows and losses within buildings than is available with current building electrical modeling software. We demonstrate the feasibility of the architecture by modeling a simple, two-zone thermal chamber with internal power electronics converters and resistive loads, and we validate the model using experimental data. The proposed co-simulation capability significantly expands the capabilities of building electrical distribution system models in the context of whole-building energy modeling, thus enabling more complex analyses than would have been possible with individual building performance simulation tools that are used to date.
Three-omega thermal-conductivity measurements with curved heater geometries
The three-omega method, a powerful technique to measure the thermal conductivity of nanometer-thick films and the interfaces between them, has historically employed straight conductive wires to act as both heaters and thermometers. When investigating stochastically prepared samples such as two-dimensional materials and nanomembranes, residue and excess material can make it difficult to fit the required millimeter-long straight wire on the sample surface. There are currently no available criteria for how diverting three-omega heater wires around obstacles affects the validity of the thermal measurement. In this Letter, we quantify the effect of the wire curvature by performing three-omega experiments with a wide range of frequencies using both curved and straight heater geometries on SiO 2 /Si samples. When the heating wire is curved, we find that the measured Si substrate thermal conductivity changes by only 0.2%. Similarly, we find that wire curvature has no significant effect on the determination of the thermal resistance of an ~65 nm SiO 2 layer, even for the sharpest corners considered here, for which the largest measured ratio of the thermal penetration depth of the applied thermal wave to radius of curvature of the heating wire is 4.3. This result provides useful design criteria for three-omega experiments by setting a lower bound for the maximum ratio of the thermal penetration depth to wire radius of curvature.
Importance of the Heat Treatment Scheme on Self-Reducing Reactive Silver Inks
Self-reducing reactive silver inks can print high-quality silver at reasonable temperatures. While numerous studies have explored the impact of processing temperature on electrical properties, the role of the heat treatment scheme has not yet been studied. Common heat treatment schemes include printing and drying inks at room temperature before heat treatment, performing heat treatments while the inks are still wet, and directly printing the inks onto heated substrates. Each scheme generates distinct heat transfer and mass transport kinetics that can affect the silver morphology and electrical properties. However, to date, the impact of different schemes has not been systematically investigated. To address this knowledge gap, this work investigates how different heat treatment schemes impact metal formation, sintering, and the resultant electrical properties of printed self-reducing reactive silver inks. Heat treatment on room-temperature dried inks and wet inks, with top-down (oven) and bottom-up (hot plate) heating sources, were compared. Inks dried at room temperature resulted in extremely porous films that required high heat treatment temperatures (>100 °C) for silver densification. However, these dried films could only densify locally, and their high initial porosities resulted in voids and high resistances (~0.6 Ω mm –1 ) even after heat treatments above 300 °C. Inks that were wet during heat treatment showed moderate improvements in electrical properties with resistances on the order of 0.4 Ω mm –1 at heat treatments of 250 °C. Printing reactive inks directly onto heated substrates yielded the best low-temperature results, with 0.46 Ω mm –1 (5.5 × bulk silver) line resistances achieved at only 90 °C. Overall, this work’s experimental results provide detailed insights into why printing onto a heated substrate results in superior electrical performance compared to more common heat treatment schemes. Additionally, controlling where the precipitation reaction occurs is critical to controlling the film morphology and properties. As a result, this work shows that even an ammonia-based silver reactive ink can achieve good, low-temperature electrical properties with the proper heat treatment scheme.
Operation of Cs–Sb–O activated GaAs in a high voltage DC electron gun at high average current
Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (>1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs–Sb–O NEA layer with minimal adverse effects. In this work, we operate GaAs photocathodes with this new activation method in a high voltage environment to extract a high current. We demonstrate that improved chemical resistance of Cs–Sb–O activated GaAs photocathodes allowed them to survive a day-long transport process from a separate vacuum system using a vacuum suitcase. During beam running, we observed spectral dependence on lifetime improvement. In particular, we saw a 45% increase in the lifetime at 780 nm on average for Cs–Sb–O activated GaAs compared to Cs–O activated GaAs.
Evidence that Surface-Segregated Sr Phases Can Be Removed in LSCF via Ceria Pre-Infiltration, Are Less Apt to Form in SSC
Here Ce 0.9 Gd 0.1 O 1.95−x (GDC) pre-infiltration was performed on 12 vol.% La 0.6 Sr 0.4 Co 0.8 Fe 0.2 O 3−x (LSCF) or Sm 0.5 Sr 0.5 CoO 3−x (SSC) infiltrated GDC Solid Oxide Fuel Cell cathodes. The addition of 7.5 vol.% of ∼40 nm diameter GDC nanoparticles into a ∼30 μ m thick porous scaffold of partially-sintered, sub-micron GDC particles before LSCF infiltration 1) lowered the temperature needed to produce a LSCF-GDC polarization resistance ( R P ) of 0.1 Ohm*cm 2 by ∼50 °C, and 2) reduced the amount of 500 h, 650 °C open-circuit LSCF-GDC R P degradation from ∼37% to ∼6%. In contrast, GDC pre-infiltration had no effect on the initial SSC-GDC R P or the 19% in R P degradation observed during 500 h of 650 °C open-circuit aging. X-Ray Photoelectron Spectroscopy showed that GDC pre-infiltration lowered the concentration of strontium species on the surface of the initial and 650 °C-aged LSCF-GDC, but had no effect on the initial or aged SSC-GDC Sr concentrations. Similarly, Electrochemical Impedance Spectroscopy showed that for both the initial and aged LSCF-GDC, GDC pre-infiltration improved oxygen exchange at the infiltrate-backbone and infiltrate-gas interfaces, but had no effect on the SSC-GDC. Hence, GDC pre-infiltration was concluded to improve LSCF-GDC performance and durability by scavenging exsolved Sr-rich secondary phases that form on the interfaces of LSCF, but not SSC.
PBI nanofiber mat-reinforced anion exchange membranes with covalently linked interfaces for use in water electrolysers
Anion exchange membranes (AEM) are key components in anion exchange membrane water electrolysers. Recently developed materials are less susceptible to the alkaline degradation of the polymer backbone and quaternary ammonium groups. A remaining challenge is the mechanical stability in contact with hot water and dimensional stability when the temperature of the feed solution changes. One solution is to reinforce membranes with a porous support. Since support materials like PEEK or PTFE have a different swelling behavior than the matrix and no strong interactions with the matrix, voids can form, and gas crossover increases. In this work, we approach this issue by pore filling polybenzimidazole nanofiber mats with the bromomethylated precursor of mTPN, an ultra-stable AEM material. During drying, a covalent interaction between support (PBI amine groups) and matrix (-CH 2 Br) is established. After quaternization, the optimized PBI/mTPN-50.120 composite membrane still shows a high conductivity of 62 mS cm –1 , but 37% reduced length swelling in comparison to the non-reinforced membrane. Tensile strength and Young's modulus increase 17% and 56% to 49 MPa and 680 MPa, respectively. In an electrolyser, a stable voltage of 1.98V at 0.25 A cm –2 was achieved, and no change in membrane resistance was observed over the test time of 200 h (50°C, 1 M KOH, catalysts based on Ni/Fe and Mo).
The sol–gel autocombustion as a route towards highly CO 2 -selective, active and long-term stable Cu/ZrO 2 methanol steam reforming catalysts
The adaption of the sol-gel autocombustion method to the Cu/ZrO 2 system opens new pathways for the specific optimisation of the activity, long-term stability and CO 2 selectivity of methanol steam reforming (MSR) catalysts. Calcination of the same post-combustion precursor at 400 °C, 600 °C or 800 °C allows accessing Cu/ZrO 2 interfaces of metallic Cu with either amorphous, tetragonal or monoclinic ZrO 2 , influencing the CO 2 selectivity and the MSR activity distinctly different. While the CO 2 selectivity is less affected, the impact of the post-combustion calcination temperature on the Cu and ZrO 2 catalyst morphology is more pronounced. A porous and largely amorphous ZrO 2 structure in the sample, characteristic for sol-gel autocombustion processes, is obtained at 400 °C. This directly translates into superior activity and long-term stability in MSR compared to Cu/tetragonal ZrO 2 and Cu/monoclinic ZrO 2 obtained by calcination at 600 °C and 800 °C. The morphology of the latter Cu/ZrO 2 catalysts consists of much larger, agglomerated and non-porous crystalline particles. Based on aberration-corrected electron microscopy, we attribute the beneficial catalytic properties of the Cu/amorphous ZrO 2 material partially to the enhanced sintering resistance of copper particles provided by the porous support morphology.
Application of printed strain gauges in prototypical nuclear reactor conditions
This report discusses the current development and testing of additively manufactured temperature sensors and resistive/ capacitive strain gauges. This has potential to improve the sensor design and manufacturing techniques to meet the requirements of in-pile monitoring of mechanical properties and structural health of materials and specimens in current and advanced nuclear test reactors (i.e., in terms of environment conditions, sample geometry, and materials compatibility). The developmental additively manufactured strain gauges are exposed to separate effects testing (i.e., mechanical strain (up to 1000 µe), high temperature (up to 700 °C)) to determine environmental factors that affect the performance of the strain gauge. The robustness and integrity of a printed strain gauge layer exposed to a molten salt environment for up to 500 hours was evaluated, with the goal of assessing material compatibility of printed strain sensors for instrumented surveillance test articles in molten salt reactors. In addition, sensor qualification methodologies are further developed for determining the reliability and robustness at the interface of the additively manufactured strain gauge materials.
Synchrotron radiography of Richtmyer–Meshkov instability driven by exploding wire arrays
We present a new technique for the investigation of shock-driven hydrodynamic phenomena in gases, liquids, and solids in arbitrary geometries. The technique consists of a pulsed power-driven resistive wire array explosion in combination with multi-MHz synchrotron radiography. Compared to commonly used techniques, it offers multiple advantages: (1) the shockwave geometry can be shaped to the requirements of the experiment, (2) the pressure (P > 300 MPa) generated by the exploding wires enables the use of liquid and solid hydrodynamic targets with well-characterized initial conditions (ICs), (3) the multi-MHz radiography enables data acquisition to occur within a single experiment, eliminating uncertainties regarding repeatability of the ICs and subsequent dynamics, and (4) the radiographic measurements enable estimation of compression ratios from the x-ray attenuation. In addition, the use of a synchrotron x-ray source allows the hydrodynamic samples to be volumetrically characterized at a high spatial resolution with synchrotron-based microtomography. This experimental technique is demonstrated by performing a planar Richtmyer–Meshkov instability (RMI) experiment on an aerogel–water interface characterized by Atwood number A0∼−0.8 and Mach number M∼1.5. The qualitative and quantitative features of the experiment are discussed, including the energy deposition into the exploding wires, shockwave generation, compression of the interface, startup phase of the instability, and asymptotic growth consistent with Richtmyer's impulsive theory. Additional effects unique to liquids and solids—such as cavitation bubbles caused by rarefaction flows or initial jetting due to small perturbations—are observed. It is also demonstrated that the technique is not shape dependent by driving a cylindrically convergent RMI experiment.
A Universal Model of Cation Effects in Electrocatalysis
Electrolyte cations are conventionally viewed as inert spectators in electrocatalysis. However, a wealth of observations show that catalytic rates are often highly sensitive to cation identity. Despite their prevalence, these cation effects have resisted a unified mechanistic explanation, with different physical phenomena implicated across reaction chemistries, catalyst compositions, and choice of solvent. In this perspective, we describe a general framework for understanding cation effects in electrocatalysis based on electrostatics. We argue that cations influence reaction rates by modifying the strength of the electric field present at the catalyst surface, which alters the energetics of adsorbed intermediates and transition states according to their dipole moments and polarizabilities. The magnitude of this field depends on how cations arrange at the electrode surface, controlled by their size, shape, solvation, and packing efficiency. Cations that can arrange more densely result in a steeper potential drop at the electrode surface and consequently a stronger electric field. Our model further identifies two criteria for observing cation effects: (1) the operating potential must be negative of the electrode’s potential of zero total charge, ensuring that cations accumulate at the interface, and (2) the energetics of the kinetically relevant elementary step must be field sensitive. This framework reconciles previously inconsistent trends, including why cation effects appear only for some catalysts, why reaction selectivity is sensitive to cation identity, and why activity can increase with cation size on certain metals but decrease on others. Supported by kinetic measurements, spectroscopy, and atomistic simulations, the model provides both conceptual value for building intuition about catalysis at charged interfaces and predictive value for anticipating trends for new reactions, catalysts, and electrolytes. We conclude by highlighting the importance of electric fields across electrochemical, thermochemical, and biological catalysis and propose that considering the electrostatic environment around active sites offers new opportunities for improving activity and selectivity.