Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generative model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

THE COLLISIONAL EVOLUTION OF DEBRIS DISKS

We explore the collisional decay of disk mass and infrared emission in debris disks. With models, we show that the rate of the decay varies throughout the evolution of the disks, increasing its rate up to a certain point, which is followed by a leveling off to a slower value. The total disk mass falls off {proportional_to}t {sup -0.35} at its fastest point (where t is time) for our reference model, while the dust mass and its proxy-the infrared excess emission-fades significantly faster ({proportional_to}t {sup -0.8}). These later level off to a decay rate of M{sub tot}(t){proportional_to}t {sup -0.08} and M{sub dust}(t) or L{sub ir}(t){proportional_to}t {sup -0.6}. This is slower than the {proportional_to}t {sup -1} decay given for all three system parameters by traditional analytic models. We also compile an extensive catalog of Spitzer and Herschel 24, 70, and 100 {mu}m observations. Assuming a log-normal distribution of initial disk masses, we generate model population decay curves for the fraction of stars harboring debris disks detected at 24 {mu}m. We also model the distribution of measured excesses at the far-IR wavelengths (70-100 {mu}m) at certain age regimes. We show general agreement at 24 {mu}m between the decay of our numerical collisional population synthesis model and observations up to a Gyr. We associate offsets above a Gyr to stochastic events in a few select systems. We cannot fit the decay in the far-infrared convincingly with grain strength properties appropriate for silicates, but those of water ice give fits more consistent with the observations (other relatively weak grain materials would presumably also be successful). The oldest disks have a higher incidence of large excesses than predicted by the model; again, a plausible explanation is very late phases of high dynamical activity around a small number of stars. Finally, we constrain the variables of our numerical model by comparing the evolutionary trends generated from the exploration of the full parameter space to observations. Amongst other results, we show that erosive collisions are dominant in setting the timescale of the evolution and that planetesimals on the order of 100 km in diameter are necessary in the cascades for our population synthesis models to reproduce the observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Solar Dynamic Power System Stability Analysis and Control

The objective of this research is to conduct dynamic analysis, control design, and control performance test of solar power system. Solar power system consists of generation system and distribution network system. A bench mark system is used in this research, which includes a generator with excitation system and governor, an ac/dc converter, six DDCU's and forty-eight loads. A detailed model is used for modeling generator. Excitation system is represented by a third order model. DDCU is represented by a seventh order system. The load is modeled by the combination of constant power and constant impedance. Eigen-analysis and eigen-sensitivity analysis are used for system dynamic analysis. The effects of excitation system, governor, ac/dc converter control, and the type of load on system stability are discussed. In order to improve system transient stability, nonlinear ac/dc converter control is introduced. The direct linearization method is used for control design. The dynamic analysis results show that these controls affect system stability in different ways. The parameter coordination of controllers are recommended based on the dynamic analysis. It is concluded from the present studies that system stability is improved by the coordination of control parameters and the nonlinear ac/dc converter control stabilize system oscillation caused by the load change and system fault efficiently.

Momoh, James A.↗

Gearbox and Drivetrain Models to Study Dynamic Effects of Modern Wind Turbines: Preprint

Wind turbine drivetrains consist of components that directly convert kinetic energy from the wind to electrical energy. Guaranteeing robust and reliable drivetrain designs is therefore important to minimize turbine downtime. Current drivetrain models often lack the ability to model both the impacts of electrical transients as well as wind turbulence and shear in one package. In this work, thecapability of the FAST wind turbine computer-aided engineering tool, developed by the National Renewable Energy Laboratory, is enhanced through integration of a dynamic model of the drivetrain. The dynamic drivetrain model is built using Simscape in the MATLAB/Simulink environment and incorporates detailed electrical generator models. This model can be used in the future to test advanced controlschemes to extend life of the gearbox.

17 WIND ENERGY↗

Model of a SiGe 130-nm 10- to 30-GHz Chaotic Self-Oscillating System

The problem of generation of utlrawideband chaotic oscillations in the frequency range of 10–30 GHz is considered. This problem is relevant to fifth-generation communication systems. A generator model designed for the silicon–germanium 130-nm process technology is proposed and studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Development of a Stochastic Model of the Atmosphere Between 30 and 90 Km to Be Used in Determining the Effect of Atmospheric Variability on Space Shuttle Entry Parameters

A stochasitc model of the atmosphere between 30 and 90 km was developed for use in Monte Carlo space shuttle entry studies. The model is actually a family of models, one for each latitude-season category as defined in the 1966 U.S. Standard Atmosphere Supplements. Each latitude-season model generates a pseudo-random temperature profile whose mean is the appropriate temperature profile from the Standard Atmosphere Supplements. The standard deviation of temperature at each altitude for a given latitude-season model was estimated from sounding-rocket data. Departures from the mean temperature at each altitude were produced by assuming a linear regression of temperature on the solar heating rate of ozone. A profile of random ozone concentrations was first generated using an auxiliary stochastic ozone model, also developed as part of this study, and then solar heating rates were computed for the random ozone concentrations.

Campbell, J. W.↗

dGen (Distributed Generation Market Demand) Model Data: Alpha Release

Open sourced data needed to run the basic alpha release version of the dGen model. Includes a pre-generated agent file of 100,000 agents in pickle file format along with the base schema and table data in parquet format that are needed to create a postgreSQL database for the model to interact with.

14 SOLAR ENERGY↗

Physical model for the generation of ideal resources in multipartite quantum networking

We propose a physical model for generating multipartite entangled states of spin-s particles that have important applications in distributed quantum information processing. Our protocol is based on a process where mobile spins induce the interaction among remote scattering centers. As such, a major advantage lies in the management of stationary and well-separated spins. Among the generable states, there is a class of N-qubit singlets allowing for optimal quantum telecloning in a scalable and controllable way. We also show how to prepare Aharonov, W, and Greenberger-Horne-Zeilinger states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The impact of coupled air–sea interaction on extreme East Asian summer monsoon simulation in CMIP5 models

Abstract In this study, the relationship between the ability to simulate air–sea interactions over the western North Pacific (WNP), and to reproduce the extreme East Asian summer monsoon (EASM), were investigated by comparing the performances of several global climate models (GCMs). High ranked in air–sea interaction simulation (HRA) and low ranked in air–sea interaction simulation (LRA) models were selected, according to their performance in simulating relations between sea surface temperature (SST) and precipitation over the WNP, from the ensemble of models that participated in the third and fifth phases of the Coupled Model Intercomparison Project (CMIP3, CMIP5). Compared with CMIP3 models, CMIP5 models exhibited improved simulations of the distinctive air–sea interaction over the WNP, namely, the strong atmospheric forcing on the ocean. Among CMIP5 models, HRA models, which reproduced intrinsic negative correlations between precipitation and SST over the WNP, could simulate the extreme EASM better than LRA models. In particular, HRA models generated a more realistic spatial distribution of the extreme EASM compared with LRA models. The defects of the LRA models resulted from distorted synoptic fields, including underestimated geopotential height and overestimated low‐level wind over the WNP, inducing unrealistic moisture supply and convection due to the exaggerated SST forcing. In contrast, reasonable air–sea interactions represented in HRA models lead to realistic synoptic fields over the WNP, and proper simulation of the extreme EASM.

Kim, Taehyung↗

Feasibility of Formulating Ecosystem Biogeochemical Models From Established Physical Rules

Abstract To improve the predictive capability of ecosystem biogeochemical models (EBMs), we discuss the feasibility of formulating biogeochemical processes using physical rules that have underpinned the many successes in computational physics and chemistry. We argue that the currently popular empirically based approaches, such as multiplicative empirical response functions and the law of the minimum, will not lead to EBM formulations that can be continuously refined to incorporate improved mechanistic understanding and empirical observations of biogeochemical processes. Instead, we propose that EBM parameterizations, as a lossy data compression problem, can be better formulated using established physical rules widely used in computational physics and chemistry, and different biogeochemical processes can be more robustly integrated within a reactive‐transport framework. Through several examples, we demonstrate how mathematical representations derived from physical rules can improve understanding of relevant biogeochemical processes and enable more effective communication between modelers, observationalists, and experimentalists regarding essential questions, such as what measurements are needed to meaningfully inform models and how can models generate new process‐level hypotheses to test in empirical studies. Finally, while empirical models with more parameters are often less robust, physical rules‐based models can be more robust and show lower predictive equifinality, stemming from their enhanced consistency in representations of processes, interactions and spatial scaling.

54 ENVIRONMENTAL SCIENCES↗

Structural phase transitions in a MoWSe 2 monolayer: Molecular dynamics simulations and variational autoencoder analysis

Electrical and optoelectronic properties of two-dimensional (2D) transition metal dichalcogenides (TMDCs) can be tuned by exploiting their structural phase transitions. Here semiconducting (2H) to metallic (1T) phase transition is investigated in a strained MoWSe 2 monolayer using molecular dynamics (MD) simulations. Novel intermediate structures called α and β are found between the 2H and 1T phases. These intermediate structures are similar to those observed in a 2D MoS 2 by scanning transmission electron microscopy. Here, a deep generative model, namely the variational autoencoder (VAE) trained by MD data, is used to generate novel heterostructures with α and β interfaces. Quantum simulations based on density functional theory show that these heterostructures are stable and suitable for novel nanoelectronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Closed-Form Formulas for Estimation of Kinetic Parameters in One- and Two-Compartment Models

.Nowadays the most reliable approach to estimate the kinetic parameters is to minimize an objective function which is essentially the distance between the measured data and the model generated pseudo data. Due to the highly non-linear nature of the model, common optimization algorithms usually fail to find the true minimum. A brute-force search method sometimes must be used to find the true minimum. This paper attempts to use the Laplace transform and Z-transform methods to derive closed-form formulas for kinetic parameter estimation problems, which assume one- or two-compartment models. The proposed method is computationally efficient and its solution is unique. When data sampling interval is small, the proposed method is able to accurately estimate the kinetic parameter; when the interval is larger, the proposed method fails to give a meaningful estimate. The one-compartment method is more robust than the two-compartment method.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modeling the temporal dynamics of nonstructural carbohydrate pools in forest trees

Trees store carbohydrates, in the form of sugars and starch, as reserves to be used to power both future growth as well as to support day-to-day metabolic functions. These reserves are particularly important in the context of how trees cope with disturbance and stress—for example, as related to pest outbreaks, wind or ice damage, and extreme climate events. In this project, we measured the size of carbon reserves in forest trees, and determined how quickly these reserves are used and replaced—i.e., their “turnover time”. Our work was conducted at Harvard Forest, a temperate deciduous forest in central Massachusetts. Through field sampling, laboratory-based chemical analyses, and allometric modeling, we scaled these measurements up to whole-tree NSC budgets. We used these data to test and improve computer simulation models of carbon flow through forest ecosystems. Our modeling focused on the mathematical representation of these stored carbon reserves, and we examined the sensitivity of model performance to different model structures. This project contributes to DOE’s goal to improve next-generation models of the earth system, and to understand the impacts of climate change on terrestrial ecosystems.

59 BASIC BIOLOGICAL SCIENCES↗

Quality metrics for sensor images

Methods are needed for evaluating the quality of augmented visual displays (AVID). Computational quality metrics will help summarize, interpolate, and extrapolate the results of human performance tests with displays. The FLM Vision group at NASA Ames has been developing computational models of visual processing and using them to develop computational metrics for similar problems. For example, display modeling systems use metrics for comparing proposed displays, halftoning optimizing methods use metrics to evaluate the difference between the halftone and the original, and image compression methods minimize the predicted visibility of compression artifacts. The visual discrimination models take as input two arbitrary images A and B and compute an estimate of the probability that a human observer will report that A is different from B. If A is an image that one desires to display and B is the actual displayed image, such an estimate can be regarded as an image quality metric reflecting how well B approximates A. There are additional complexities associated with the problem of evaluating the quality of radar and IR enhanced displays for AVID tasks. One important problem is the question of whether intruding obstacles are detectable in such displays. Although the discrimination model can handle detection situations by making B the original image A plus the intrusion, this detection model makes the inappropriate assumption that the observer knows where the intrusion will be. Effects of signal uncertainty need to be added to our models. A pilot needs to make decisions rapidly. The models need to predict not just the probability of a correct decision, but the probability of a correct decision by the time the decision needs to be made. That is, the models need to predict latency as well as accuracy. Luce and Green have generated models for auditory detection latencies. Similar models are needed for visual detection. Most image quality models are designed for static imagery. Watson has been developing a general spatial-temporal vision model to optimize video compression techniques. These models need to be adapted and calibrated for AVID applications.

Ahumada, AL↗

Remote Thermal IR Spectroscopy of our Solar System

Indirect methods to detect extrasolar planets have been successful in identifying a number of stars with companion planets. No direct detection of an extrasolar planet has yet been reported. Spectroscopy in the thermal infrared region provides a potentially powerful approach to detection and characterization of planets and planetary systems. We can use knowledge of our own solar system, its planets and their atmospheres to model spectral characteristics of planets around other stars. Spectra derived from modeling our own solar system seen from an extrasolar perspective can be used to constrain detection strategies, identification of planetary class (terrestrial vs. gaseous) and retrieval of chemical, thermal and dynamical information. Emission from planets in our solar system peaks in the thermal infrared region, approximately 10 - 30 microns, substantially displaced from the maximum of the much brighter solar emission in the visible near 0.5 microns. This fact provides a relatively good contrast ratio to discriminate between stellar (solar) and planetary emission and optimize the delectability of planetary spectra. Important molecular constituents in planetary atmospheres have rotational-vibrational spectra in the thermal infrared region. Spectra from these molecules have been well characterized in the laboratory and studied in the atmospheres of solar system planets from ground-based and space platforms. The best example of such measurements are the studies with Fourier transform spectrometers, the Infrared Interferometer Spectrometers (IRIS), from spacecraft: Earth observed from NIMBUS 8, Mars observed from Mariner 9, and the outer planets observed from Voyager spacecraft. An Earth-like planet is characterized by atmospheric spectra of ozone, carbon dioxide, and water. Terrestrial planets have oxidizing atmospheres which are easily distinguished from reducing atmospheres of gaseous giant planets which lack oxygen-bearing species and are characterized by spectra containing hydrocarbons such as methane and ethane. Spectroscopic information on extrasolar planets thus can permit their classification. Spectra and spectral lines contain information on the temperature structure of the atmosphere. Line and band spectra can be used to identify the molecular constituents and retrieve species abundances, thereby classifying and characterizing the planet. At high enough spectral resolution characteristic planetary atmospheric dynamics and unique phenomena such as failure of local thermodynamic equilibrium can be identified. Dynamically induced effects such as planetary rotation and orbital velocity shift and change the shape of spectral features and must be modeled in detailed spectral studies. We will use our knowledge of the compositional, thermal and dynamical characteristics of planetary atmospheres in our own solar system to model spectra observed remotely on similar planets in extrasolar planetary systems. We will use a detailed radiative transfer and beam integration program developed for the modeling and interpretation of thermal infrared spectra measured from nearby planet planets to generate models of an extra-solar "Earth" and "Jupiter". From these models we will show how key spectral features distinguish between terrestrial and gaseous planets, what information can be obtained with different spectral resolution, what spectral features can be used to search for conditions for biogenic activity, and how dynamics and distance modify the observed spectra. We also will look at unique planetary phenomena such as atmospheric lasing and discuss their utility as probes for detection and identification of planets. Results of such studies will provide information to constrain design for instrumentation needed to directly detect extrasolar planets.

Kostiuk, Theodor↗

GEM-CEDAR Study of Ionospheric Energy Input and Joule Dissipation

We are studying ionospheric model performance for six events selected for the GEM-CEDAR modeling challenge. DMSP measurements of electric and magnetic fields are converted into Poynting Flux values that estimate the energy input into the ionosphere. Models generate rates of ionospheric Joule dissipation that are compared to the energy influx. Models include the ionosphere models CTIPe and Weimer and the ionospheric electrodynamic outputs of global magnetosphere models SWMF, LFM, and OpenGGCM. This study evaluates the model performance in terms of overall balance between energy influx and dissipation and tests the assumption that Joule dissipation occurs locally where electromagnetic energy flux enters the ionosphere. We present results in terms of skill scores now commonly used in metrics and validation studies and we can measure the agreement in terms of temporal and spatial distribution of dissipation (i.e, location of auroral activity) along passes of the DMSP satellite with the passes' proximity to the magnetic pole and solar wind activity level.

Rastaetter, Lutz↗

Technical Report Series on Global Modeling and Data Assimilation, Volume 43: Initial Evaluation of the Climate - MERRA-2

The years since the introduction of MERRA have seen numerous advances in the GEOS-5 Data Assimilation System as well as a substantial decrease in the number of observations that can be assimilated into the MERRA system. To allow continued data processing into the future, and to take advantage of several important innovations that could improve system performance, a decision was made to produce MERRA-2, an updated retrospective analysis of the full modern satellite era. One of the many advances in MERRA-2 is a constraint on the global dry mass balance; this allows the global changes in water by the analysis increment to be near zero, thereby minimizing abrupt global interannual variations due to changes in the observing system. In addition, MERRA-2 includes the assimilation of interactive aerosols into the system, a feature of the Earth system absent from previous reanalyses. Also, in an effort to improve land surface hydrology, observations-corrected precipitation forcing is used instead of model-generated precipitation. Overall, MERRA-2 takes advantage of numerous updates to the global modeling and data assimilation system. In this document, we summarize an initial evaluation of the climate in MERRA-2, from the surface to the stratosphere and from the tropics to the poles. Strengths and weaknesses of the MERRA-2 climate are accordingly emphasized.

MERRA-2↗

Oklahoma Health and Air Quality: Mapping Air Quality Using NASA Earth Observations to Investigate Recent Increases in Ozone Concentrations

Tropospheric ozone (O3) is formed by anthropogenic pollutants interacting with sunlight and is considered harmful to human health in high concentrations. In the summer of 2018, the Oklahoma Department of Environmental Quality (DEQ) measured unexpected spikes in O3 in Seiling, Oklahoma, with concentrations exceeding those measured in bustling Oklahoma City and Tulsa. The DEQ tracks air quality using ground monitors and does not utilize Earth observation data in its monitoring or analysis. This project used remotely sensed data to investigate these2018 air quality anomalies, identifying possible causes. We analyzed atmospheric data from Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS), and Sentinel-5P Tropospheric Ozone Monitoring Instrument (TROPOMI) in conjunction with ground-based measurements of tropospheric ozone (O3), nitrogen dioxide (NO2), methane (CH4), carbon monoxide (CO), formaldehyde (HCHO) and aerosol optical depth (AOD). We compared Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model simulations and Earth observation visualizations to pinpoint ozone spike causes. We also generated models to identify contributing factors to variations in ground ozone concentrations in our study area. The results point to a variety of ozone spike causes, primarily from outside of the state, and support the placement of additionalNO2, O3, and CO monitors to the southeast of Seiling. These analyses can help guide the placement of future monitors in the ground monitoring network and inform air quality regulations in Oklahoma.

Carolina Rosales↗

Apollo

Modern performance portability frameworks provide application developers with a flexible way to determine how to run application kernels, however, they provide no guidance as to the best configuration for a given kernel. Apollo provides a model-generation framework that, when integrated with the RAJA library, uses lightweight decision tree models to select the fastest execution configuration on a per-kernel basis

Beckingsal, David↗