Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “general”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Optimum design of structures subject to general periodic loads

A simplified version of Icerman's problem regarding the design of structures subject to a single harmonic load is discussed. The nature of the restrictive conditions that must be placed on the design space in order to ensure an analytic optimum are discussed in detail. Icerman's problem is then extended to include multiple forcing functions with different driving frequencies. And the conditions that now must be placed upon the design space to ensure an analytic optimum are again discussed. An important finding is that all solutions to the optimality condition (analytic stationary design) are local optima, but the global optimum may well be non-analytic. The more general problem of distributing the fixed mass of a linear elastic structure subject to general periodic loads in order to minimize some measure of the steady state deflection is also considered. This response is explicitly expressed in terms of Green's functional and the abstract operators defining the structure. The optimality criterion is derived by differentiating the response with respect to the design parameters. The theory is applicable to finite element as well as distributed parameter models.

Reiss, Robert↗
NASA NTRS1989

Numerical solution of unsteady incompressible viscous flows in generalized moving coordinate systems

A solution method of the time-accurate, incompressible Navier-Stokes equations in generalized curvilinear moving coordinate systems is presented in this paper. Accuracy is achieved by a conservative finite-volume discretization which satisfies the geometric conservation laws in generalized moving coordinate systems. The solution method is second-order accurate in space and first-order accurate in time. A fractional step solution method is used to efficiently solve the discrete equations. The unknowns, namely the pressure and the volume-fluxes, are chosen to facilitate the formulation of a consistent Poisson equation and to obtain a robust Poisson solver with favorable convergence properties. The method is validated by comparisons to other numerical and experimental solutions. The comparisons show good agreement.

Rosenfeld, Moshe↗
NASA NTRS1989

Interpretation of cloud-climate feedback as produced by 14 atmospheric general circulation models

Understanding the cause of differences among general circulation model projections of carbon dioxide-induced climatic change is a necessary step toward improving the models. An intercomparison of 14 atmospheric general circulation models, for which sea surface temperature perturbations were used as a surrogate climate change, showed that there was a roughly threefold variation in global climate sensitivity. Most of this variation is attributable to differences in the models' depictions of cloud-climate feedback, a result that emphasizes the need for improvements in the treatment of clouds in these models if they are ultimately to be used as climatic predictors.

Cess, R. D.↗
NASA NTRS1989

Effects of implementing the Simple Biosphere Model in a general circulation model

The Simple Biosphere Model (SiB) of Sellers et al., was designed to simulate the interactions between the earth's land surface and the atmosphere by treating the vegetation explicitly and realistically, thereby incorporating the biophysical controls on the exchanges of radiation, momentum, sensible and latent heat between the two systems. This paper describes the steps taken to implement SiB in a modified version of the National Meteorological Center's global spectral general circulation model (GCM) and explores the impact of the implementation on the simulated land surface fluxes and near-surface meteorological conditions. The coupled model (SiB-GCM) was used to produce summer and winter simulations. The same GCM was used with a conventional hydrological model (Ctl-GCM) to produce comparable 'control' summer and winter simulations for comparison. It was found that SiB-GCM produced a more realistic partitioning of energy at the land surface than Ctl-GCM. Generally, SiB-GCM, produced more sensible heat flux and less latent heat flux over vegetated land than did Ctl-GCM and this resulted in a much deeper daytime planetary boundary layer and reduced precipitation rates over the continents in SiB-GCM. In the summer simulation, the 200 mb jet stream was slightly weakened in the SiB-GCM relative to the Ctl-GCM results and analyses made from observations.

Sato, N.↗
NASA NTRS1990

General-Purpose Serial Interface For Remote Control

Computer controls remote television camera. General-purpose controller developed to serve as interface between host computer and pan/tilt/zoom/focus functions on series of automated video cameras. Interface port based on 8251 programmable communications-interface circuit configured for tristated outputs, and connects controller system to any host computer with RS-232 input/output (I/O) port. Accepts byte-coded data from host, compares them with prestored codes in read-only memory (ROM), and closes or opens appropriate switches. Six output ports control opening and closing of as many as 48 switches. Operator controls remote television camera by speaking commands, in system including general-purpose controller.

Busquets, Anthony M.↗
NASA NTRS1989

The generalized drift flux approach: Identification of the void-drift closure law

The main characteristics and the potential advantages of generalized drift flux models are presented. In particular it is stressed that the issue on the propagation properties and on the mathematical nature (hyperbolic or not) of the model and the problem of closure are easier to tackle than in two fluid models. The problem of identifying the differential void-drift closure law inherent to generalized drift flux models is then addressed. Such a void-drift closure, based on wave properties, is proposed for bubbly flows. It involves a drift relaxation time which is of the order of 0.25 s. It is observed that, although wave properties provide essential closure validity tests, they do not represent an easily usable source of quantitative information on the closure laws.

Boure, J. A.↗
NASA NTRS1989

A new technique for simulating composite material. Task 2: Analytical solutions with Generalized Impedance Boundary Conditions (GIBCs)

The diffraction problem associated with a multilayer material slab recessed in a perfectly conducting ground plane is formulated and solved via the Generalized Scattering Matrix Formulation (GSMF) in conjunction with the dual integral equation approach. The multilayer slab is replaced by a surface obeying a generalized impedance boundary condition (GIBC) to facilitate the computation of the pertinent Wiener Hopf split functions and their zeros. Both E(sub z) and H(sub z) polarizations are considered and a number of scattering patterns are presented, some of which are compared to exact results available for a homogeneous recessed slab.

Ricoy, M. A.↗
NASA NTRS1989

General relativistic x ray (UV) polarization rotations as a quantitative test for black holes

It is now 11 years since a potentially easily observable and quantitative test for black holes using general relativistic polarization rotations was proposed (Stark and Connors 1977, and Connors and Stark 1977). General relativistic rotations of the x ray polarization plane of 10 to 100 degrees with x ray energy (between 1 and 100 keV) are predicted for black hole x ray binaries. (Classically, by symmetry, there is no rotation.) Unfortunately, x ray polarimetry has not been taken sufficiently seriously during this period, and this test has not yet been performed. A similar (though probably less clean) effect is expected in the UV for supermassive black holes in some quasars active galactic nuclei. Summarizing: (1) a quantitative test (proposed in 1977) for black holes exists; (2) x ray polarimetry of galactic x ray binaries sensitive to at least 1/2 percent between 1 keV and 100 keV is needed (polarimetry in the UV of quasars and AGN will also be of interest); and (3) proportional counters using timerise discrimination were shown in laboratory experiments able to perform x ray polarimetry and this and other methods need to be developed.

Stark, Richard F.↗
NASA NTRS1990

LANZ: Software solving the large sparse symmetric generalized eigenproblem

A package, LANZ, for solving the large symmetric generalized eigenproblem is described. The package was tested on four different architectures: Convex 200, CRAY Y-MP, Sun-3, and Sun-4. The package uses a Lanczos' method and is based on recent research into solving the generalized eigenproblem.

Jones, Mark T.↗
NASA NTRS1990

Analysis and design of sidestick controller systems for general aviation aircraft

A method to design sidestick controllers for general aviation aircraft with reversible flight controls is proposed. The use of a sidestick in this type of flight vehicle generally increases the stick forces required for maneuvering; this is due to a reduction in the moment arm of application of the force. In the present study, the reduction of stick forces is achieved by incorporating geared tabs in the control-surface design. A complete analysis using the rigid-body aircraft longitudinal equations of motion and stick-force equation in coupled form is carried out. Lateral stick forces are predicted by solving the single-degree-of-freedom roll approximation and aileron stick-force equations. Data are presented for configurations with various tab areas and a wide range of gearing ratios. The results indicate that the method can be used successfully for geared-tab design and stick-force prediction. It is shown that gearing-ratio selection is critical but that tab area does not have a significant impact on the magnitude of stick forces and stick force to stick deflection gradients.

Martin, Daniel M.↗
NASA NTRS1990

Numerical solution of the boundary-layer equations for a general aviation fuselage

Numerical solutions of the three-dimensional, compressible laminar boundary-layer equations for a general aviation fuselage are presented. The numerical procedure is second-order accurate and independent of the cross-flow velocity direction. Numerical results are presented for a Mach number and unit Reynolds number of 0.3 and 7 x 10 to the 6th/m, respectively, for angles of attack of 0 and 3 deg. Comparisons are made between results obtained using a general nonorthogonal curvilinear body oriented coordinate system and a streamline coordinate system. Axisymmetric analogue results are also compared with the three-dimensional solutions.

Wie, Yong-Sun↗
NASA NTRS1989

Parallel solution of pentadiagonal systems using generalized odd-even elimination

A method for the solution of pentadiagonal systems of linear equations is presented. The method is a generalization of ordinary odd-even elimination used for tridiagonal systems. Using n processors, an n x n pentadiagonal system can be solved using the new method (generalized odd-even elimination) in time proportional to log(2) n.

Levit, Creon↗
NASA NTRS1990

Derivation of generalized transition/boundary conditions for planar multiple-layer structures

Infinite-order generalized impedance boundary conditions (GIBCs) and generalized sheet transition conditions (GSTCs) for planar multilayer configurations are developed via the Taylor series expansion method. The conditions are derived in a matrix product form where each matrix corresponds to a specific layer. An overall composite boundary/transition condition is obtained by making finite-order approximations to the elements of each matrix for the cases of 'low-contrast' and 'high-contrast' material layers. The accuracy of the truncated boundary conditions is examined by comparing their implied reflection and transmission coefficients with the corresponding exact coefficients. Design curves are also given which relate the maximum order of the conditions required to simulate a coating or layer of specific thickness and contrast. Expressions are then derived for the reflection and transmission coefficients of the GIBC/GSTC sheets, and these are compared to exact coefficients to demonstrate the validity of the derived GIBCs/GSTCs.

Ricoy, M. A.↗
NASA NTRS1990

Generalized flux-vector splitting and Roe average for an equilibrium real gas

Generalizations of the two flux-vector splittings and the Roe average to an arbitrary equilibrium gas are presently shown to introduce one degree of freedom in each case. The forms developed are those believed to be the simplest capable of satisfying basic physical principles while being valid for the most general flow conditions and gas laws, entailing only minor modifications of the perfect gas formulas. The flux-vector splittings represent a simpler problem, since they involve a single thermodynamic state for each split-flux term; only the pressure and the sound speed need to be evaluated, in place of the individual pressure derivatives.

Vinokur, Marcel↗
NASA NTRS1990

Intercomparison and interpretation of climate feedback processes in 19 atmospheric general circulation models

The present study provides an intercomparison and interpretation of climate feedback processes in 19 atmospheric general circulation models. This intercomparison uses sea surface temperature change as a surrogate for climate change. The interpretation of cloud-climate interactions is given special attention. A roughly threefold variation in one measure of global climate sensitivity is found among the 19 models. The important conclusion is that most of this variation is attributable to differences in the models' depiction of cloud feedback, a result that emphasizes the need for improvements in the treatment of clouds in these models if they are ultimately to be used as reliable climate predictors. It is further emphazied that cloud feedback is the consequence of all interacting physical and dynamical processes in a general circulation model. The result of these processes is to produce changes in temperature, moisture distribution, and clouds which are integrated into the radiative response termed cloud feedback.

Cess, R. D.↗
NASA NTRS1990

General method for assessing the geographically correlated error for an orbiter with applications to Topex

An estimation based computational algorithm for evaluating geographically dependent orbit determination errors is presented. A derivation is included of the generalized geographically correlated error analysis algorithm and the algorithm is applied to a Topex simulation. Then a general numerical technique which provides the capability to analyze any type of mismodeled parameter with the geopotential as a special case is described. The numerical algorithm is compared with the analytic method of Rosborough (1986) and it is shown that both methods generate consistent geographically dependent orbit error profiles when the ephemeris error is dominated by the mismodeled geopotential.

Wolff, P. J.↗
NASA NTRS1990

Feasibility investigation of general time-domain unsteady aerodynamics of rotors

The feasibility of a general theory for the time-domain unsteady aerodynamics of helicopter rotors is investigated. The wake theory gives a linearized relation between the downwash and the wing bound circulation, in terms of the impulse response obtained directly in the time domain. This approach makes it possible to treat general wake configurations, including discrete wake vorticity with rolled-up and distorted geometry. The investigation establishes the approach for model order reduction; determines when a constrained identification method is needed; verifies the formulation of the theory for rolled-up, distorted trim wake geometry; and verifies the formulation of the theory for wake geometry perturbations. The basic soundness of the approach is demonstrated by the results presented. A research program to complete the development of the method is outlined. The result of this activity will be an approach for analyzing the aeroelastic stability and response of helicopter rotors, while retaining the important influence of the complicated rotor wake configuration.

Johnson, Wayne↗