Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flight computers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

Integrated Circuit Chip Improves Network Efficiency

Prior to 1999 and the development of SpaceWire, a standard for high-speed links for computer networks managed by the European Space Agency (ESA), there was no high-speed communications protocol for flight electronics. Onboard computers, processing units, and other electronics had to be designed for individual projects and then redesigned for subsequent projects, which increased development periods, costs, and risks. After adopting the SpaceWire protocol in 2000, NASA implemented the standard on the Swift mission, a gamma ray burst-alert telescope launched in November 2004. Scientists and developers on the James Webb Space Telescope further developed the network version of SpaceWire. In essence, SpaceWire enables more science missions at a lower cost, because it provides a standard interface between flight electronics components; new systems need not be custom built to accommodate individual missions, so electronics can be reused. New protocols are helping to standardize higher layers of computer communication. Goddard Space Flight Center improved on the ESA-developed SpaceWire by enabling standard protocols, which included defining quality of service and supporting plug-and-play capabilities. Goddard upgraded SpaceWire to make the routers more efficient and reliable, with features including redundant cables, simultaneous discrete broadcast pulses, prevention of network blockage, and improved verification. Redundant cables simplify management because the user does not need to worry about which connection is available, and simultaneous broadcast signals allow multiple users to broadcast low-latency side-band signal pulses across the network using the same resources for data communication. Additional features have been added to the SpaceWire switch to prevent network blockage so that more robust networks can be designed. Goddard s verification environment for the link-and-switch implementation continuously randomizes and tests different parts, constantly anticipating situations, which helps improve communications reliability. It has been tested in many different implementations for compatibility.

Source record↗
NASA NTRS1989

Gravitational model improvement at the Goddard Space Flight Center

Major new computations of terrestrial gravitational field models were performed by the Geodynamics Branch of Goddard Space Flight Center (GSFC). This development has incorporated the present state of the art results in satellite geodesy and have relied upon a more consistent set of reference constants than was heretofore utilized in GSFC's GEM models. The solutions are complete in spherical harmonic coefficients out to degree 50 for the gravity field parameters. These models include adjustment for a subset of 66 ocean tidal coefficients for the long wavelength components of 12 major ocean tides. This tidal adjustment was made in the presence of 550 other fixed ocean tidal terms representing 32 major and minor ocean tides and the Wahr frequency dependent solid earth tidal model. In addition 5-day averaged values for Earth rotation and polar motion were derived for the time period of 1980 onward. Two types of models were computed. These are satellite only models relying exclusively on tracking data and combination models which have incorporated satellite altimetry and surface gravity data. The satellite observational data base consists of over 1100 orbital arcs of data on 31 satellites. A large percentage of these observations were provided by third generation laser stations (less than 5 cm). A calibration of the model accuracy of the GEM-T2 satellite only solution indicated that it was a significant improvement over previous models based solely upon tracking data. The rms geoid error for this field is 110 cm to degree and order 36. This is a major advancement over GEM-T1 whose errors were estimated to be 160 cm. An error propagation using the covariances of the GEM-T2 model for the TOPEX radial orbit component indicates that the rms radial errors are expected to be 12 cm. The combination solution, PGS-3337, is a preliminary effort leading to the development of GEM-T3. PGS-3337 has incorporated global sets of surface gravity data and the Seasat altimetry to produce a model complete to (50,50). A solution for the dynamic ocean topography to degree and order 10 was included as part of this adjustment.

Marsh, J. G.↗
NASA NTRS1978

Identification of the stability parameters of an aeroelastic airplane

The problem of the parameter identification of large scale dynamic systems involving a system matrix characterized by approximately 200 elements is addressed. By using phase variable transformations, a mathematical model of an aeroelastic airplane is described in a form that is amenable to partial or piecemeal acceptance of parameters estimated from flight data. A mathematical model of the U.S. Air Force Total In-Flight Simulator was computed using the FLEXSTAB digital computer program. As data became available during the progress of the flight test program, this data was processed and substituted in the mathematical model for parameters analytically obtained from the FLEXSTAB program. The results tend to show a progressive and orderly transition from an analytically defined mathematical model to one obtained from the flight tests of the actual aircraft.

Rynaski, E. G.↗
NASA NTRS1992

Magnitude calibration of a fixed head star tracker using Astro-1 flight data

The Astro-1 UV astronomy mission was hampered by the failures of the automatic star acquisition procedure. The acquisition procedure depended on the Instrument Pointing Subsystem's Fixed Head Star Trackers (FHST) to acquire, track and identify guidestars of known visual magnitude. During the Astro-1 mission it was suspected that the star magnitudes measured by the FHST were much lower than predicted. A postflight investigation of the Astro-1 flight data confirmed and quantified this suspicion. Star magnitude calibration curves computed from the flight data depict the variance from the preflight calibration curves. These results are helping engineers to plan improvements to the acquisition procedure for the upcoming Astro-2 mission.

Rakoczy, John M.↗
NASA NTRSDate not supplied

Probability of Obstacle Collision for UAVs in Presence of Wind

For incorporation of unmanned aerial vehicles into the National Airspace, ensuring safety of the airspace including the vehicles, people, and property on the ground is of utmost importance. One of the safety-critical factors for unmanned aviation flights is the risk of deviating from a planned trajectory resulting in a variety of hazards, including potential loss of separation between vehicle and obstacles or unexpected battery energy consumption. Off-nominal conditions introduced by component failures, degraded controllability and environmental disturbances such as wind gusts can lead to unacceptable unexpected deviations from the flight trajectory. It is essential to accurately model such effects on the flight trajectory while computing safety thresholds such as minimum separation from surrounding obstacles, available battery resource to complete the mission or determining delay in the expected time of arrival of flights. In this paper, a tool is presented based on Gaussian Process Regression for wind representation over a pre-defined trajectory for fast, yet approximated, in-time evaluation of possible trajectory deviations caused by wind gusts. The deviation in the planned trajectory caused by wind is further simulated utilizing a 6 degrees-of-freedom (DOF) UAV trajectory simulator comprising of a rotorcraft lumped-mass model with LQRI controller. Both steady-state wind and wind gust effects are investigated. The probability of collision with obstacle is computed and demonstrated on real flight data from experimental flights of an octocopter at NASA Langley Research Center in the presence of simulated obstacles and wind conditions. Effect of varying wind conditions and varying UAV airspeed is further demonstrated on experimental flights in the presence of wind measured by ground based weather service stations. The proposed approach would eventually benefit timely mitigation of current and future safety-critical events in autonomous systems by enabling risk-informed decision making.

Portia Banerjee↗
NASA NTRS1992

A high angle of attack inviscid shuttle orbiter computation

As a preliminary step toward predicting the leeside thermal environment for winged reentry vehicles at flight conditions, a computational solution for the flow about the Shuttle Orbiter at wind tunnel conditions was made using a point-implicit, finite volume scheme known as the Langley Aerothermodynamic Upwind Relaxation Algorithm (LAURA). The surface pressures resulting from the computational solution are compared with wind tunnel data. The results indicate that the dominant inviscid flow features are being accurately predicted on the leeside of the Shuttle Orbiter at a moderately high angle of attack.

Kleb, William L.↗
NASA NTRS1976

In-flight utilization of the Mariner 10 spacecraft computer

Mariner 10 in its mission to Venus and Mercury used an onboard control computer with a 512-word memory. An outline is presented of the general philosophy adopted with respect to the utilization of the available memory and a description is given of the actual in-flight operation of the machine. The onboard computer system provided automatic stored-program sequence control of all spacecraft scientific, engineering, and propulsive maneuver operations. The system consisted of the special purpose digital computer and a fixed hard-wired sequencer. Attention is given to the programming architecture, aspects of mission design, and computer performance.

Hooke, A. J.↗
NASA NTRS2010

Analysis of Flight Management System Predictions of Idle-Thrust Descents

To enable arriving aircraft to fly optimized descents computed by the flight management system (FMS) in congested airspace, ground automation must accurately predict descent trajectories. To support development of the predictor and its uncertainty models, descents from cruise to the meter fix were executed using vertical navigation in a B737-700 simulator and a B777-200 simulator, both with commercial FMSs. For both aircraft types, the FMS computed the intended descent path for a specified speed profile assuming idle thrust after top of descent (TOD), and then it controlled the avionics without human intervention. The test matrix varied aircraft weight, descent speed, and wind conditions. The first analysis in this paper determined the effect of the test matrix parameters on the FMS computation of TOD location, and it compared the results to those for the current ground predictor in the Efficient Descent Advisor (EDA). The second analysis was similar but considered the time to fly a specified distance to the meter fix. The effects of the test matrix variables together with the accuracy requirements for the predictor will determine the allowable error for the predictor inputs. For the B737, the EDA prediction of meter fix crossing time agreed well with the FMS; but its prediction of TOD location probably was not sufficiently accurate to enable idle-thrust descents in congested airspace, even though the FMS and EDA gave similar shapes for TOD location as a function of the test matrix variables. For the B777, the FMS and EDA gave different shapes for the TOD location function, and the EDA prediction of the TOD location is not accurate enough to fully enable the concept. Furthermore, the differences between the FMS and EDA predictions of meter fix crossing time for the B777 indicated that at least one of them was not sufficiently accurate.

Stell, Laurel↗
NASA NTRS1981

The Development and Use of a Computer-Interactive Data Acquisition and Display System in a Flight Environment

The flight test data requirements at the NASA Dryden Flight Research Center increased in complexity, and more advanced instrumentation became necessary to accomplish mission goals. This paper describes the way in which an airborne computer was used to perform real-time calculations on critical flight test parameters during a flight test on a winglet-equipped KC-135A aircraft. With the computer, an airborne flight test engineer can select any sensor for airborne display in several formats, including engineering units. The computer is able to not only calculate values derived from the sensor outputs but also to interact with the data acquisition system. It can change the data cycle format and data rate, and even insert the derived values into the pulse code modulation (PCM) bit stream for recording.

Computer Systems↗
NASA NTRS1991

Aid For Simulating Digital Flight Control Systems

DIVERS translator is computer program to convert descriptions of digital flight-control systems (DFCS) into computer program. Language developed to represent design charts of DFCS. Translator converts DIVERS source code into easily transportable language, while minimizing probability that results are affected by interpretation of programmer. Final translated program used as standard of comparison to verify operation of actual flight-control systems. Applicable to simulation of other control systems; for example, electrical circuits and logic processes. Written in C.

Hartman, Richard M.↗
NASA NTRS1979

Adaptive allocation of decisionmaking responsibility between human and computer in multitask situations

As human and computer come to have overlapping decisionmaking abilities, a dynamic or adaptive allocation of responsibilities may be the best mode of human-computer interaction. It is suggested that the computer serve as a backup decisionmaker, accepting responsibility when human workload becomes excessive and relinquishing responsibility when workload becomes acceptable. A queueing theory formulation of multitask decisionmaking is used and a threshold policy for turning the computer on/off is proposed. This policy minimizes event-waiting cost subject to human workload constraints. An experiment was conducted with a balanced design of several subject runs within a computer-aided multitask flight management situation with different task demand levels. It was found that computer aiding enhanced subsystem performance as well as subjective ratings. The queueing model appears to be an adequate representation of the multitask decisionmaking situation, and to be capable of predicting system performance in terms of average waiting time and server occupancy. Server occupancy was further found to correlate highly with the subjective effort ratings.

Chu, Y.-Y.↗
NASA NTRS1980

Evaluation of a computer-generated perspective tunnel display for flight path following

The display was evaluated by monitoring pilot performance in a fixed base simulator with the vehicle dynamics of a CH-47 tandem rotor helicopter. Superposition of the predicted future vehicle position on the tunnel image was also investigated to determine whether, and to what extent, it contributes to better system performance (the best predicted future vehicle position was sought). Three types of simulator experiments were conducted: following a desired trajectory in the presence of disturbances; entering the trajectory from a random position, outside the trajectory; detecting and correcting failures in automatic flight. The tunnel display with superimposed predictor/director symbols was shown to be a very successful combination, which outperformed the other two displays in all three experiments. A prediction time of 4 to 7 sec. was found to optimize trajectory tracking for the given vehicle dynamics and flight condition. Pilot acceptance of the tunnel plus predictor/director display was found to be favorable and the time the pilot needed for familiarization with the display was found to be relatively short.

Grunwald, A. J.↗
NASA NTRS1982

Ozone Uncertainties Study Algorithm (OUSA)

An algorithm to carry out sensitivities, uncertainties and overall imprecision studies to a set of input parameters for a one dimensional steady ozone photochemistry model is described. This algorithm can be used to evaluate steady state perturbations due to point source or distributed ejection of H2O, CLX, and NOx, besides, varying the incident solar flux. This algorithm is operational on IBM OS/360-91 computer at NASA/Goddard Space Flight Center's Science and Applications Computer Center (SACC).

Bahethi, O. P.↗
NASA NTRS1990

Enhanced thermochemical nonequilibrium computations of flow around the aeroassist flight experiment vehicle

A three-dimensional explicit, finite-rate, shock-capturing numerical algorithm is used to calculate thermochemical nonequilibrium flowfields about the Aeroassist Flight Experiment vehicle at one of its flight trajectory points. The full Navier-Stokes equations and an eleven species chemical model with the latest reaction rates are incorporated into the code. Results are compared against experimental data and other numerical solutions. The effects of changes to the physical model on the stagnation line and base region flow and surface quantities on the forebody are investigated.

Palmer, Grant↗
NASA NTRS1991

Passive range sensor refinement using texture and segmentation

Electrooptical sensors provide a covert way of computing range during helicopter flight. The optical flow-based computation of range provides range information only in certain distinguishable parts of the image. The regions where range information is available can be increased by performing texture analysis and object segmentation in the image. This paper reviews some of the literature on texture segmentation methods with a view towards applying them to images containing both man-made and natural objects at varying ranges. Two algorithmic approaches are given and their application to a real image is demonstrated. Results indicate that it will be necessary to combine several different texture measures and methods in a hierarchical way in order to achieve an object segmentation which is useful in enhancing range information.

Sridhar, Banavar↗