Results for “filter methods” — Page 37

NASA NTRS1988

Modification of a successive corrections objective analysis for improved higher order calculations

The use of objectively analyzed fields of meteorological data for the initialization of numerical prediction models and for complex diagnostic studies places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification was proposed for an objective analysis developed by Barnes that provides improvements in analysis of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 percent. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field of data.

Achtemeier, Gary L.↗

NASA NTRS1989

Modification of a successive corrections objective analysis for improved higher order calculations

The use of objectively analyzed fields of meteorological data for the initialization of numerical prediction models and for complex diagnostic studies places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification was proposed for an objective analysis developed by Barnes that provides improvements in analysis of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 percent. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field of data.

Achtemeier, Gary L.↗

NASA NTRS1991

Modification of a Successive Corrections Objective Analysis for Improved Derivative Calculations

The use of objectively analyzed fields of meteorological data for complex diagnostic studies and for the initialization of numerical prediction models places the requirements upon the objective method that derivatives of the gridded fields be accurate and free from interpolation error. A modification of an objective analysis developed by Barnes provides improvements in analyses of both the field and its derivatives. Theoretical comparisons, comparisons between analyses of analytical monochromatic waves, and comparisons between analyses of actual weather data are used to show the potential of the new method. The new method restores more of the amplitudes of desired wavelengths while simultaneously filtering more of the amplitudes of undesired wavelengths. These results also hold for the first and second derivatives calculated from the gridded fields. Greatest improvements were for the Laplacian of the height field; the new method reduced the variance of undesirable very short wavelengths by 72 pct. Other improvements were found in the divergence of the gridded wind field and near the boundaries of the field data.

Achtemeier, Gary L.↗

NASA NTRS2017

Particulate filtration from emissions of a plasma pyrolysis assembly reactor using regenerable porous metal filters

Microwave-based plasma pyrolysis technology is being studied as a means of supporting oxygen recovery in future spacecraft life support systems. The process involves the conversion of methane produced from a Sabatier reactor to acetylene and hydrogen, with a small amount of solid carbon particulates generated as a side product. The particles must be filtered before the acetylene is removed and the hydrogen-rich gas stream is recycled back to the CRA. We discuss developmental work on porous metal media filters for removing the carbon particulate emissions from the PPA exit gas stream and to provide in situ media regeneration capability. Because of the high temperatures involved in oxidizing the deposited carbon during regeneration, there was particular focus in this development on the materials that could be used, the housing design, and heating methods. This paper describes the design and operation of the filter and characterizes their performance from integrated testing at the Environmental Chamber (E-Chamber) at MSFC.

particulates↗

NASA NTRS2017

Particulate Filtration from Emissions of a Plasma Pyrolysis Assembly Reactor Using Regenerable Porous Metal Filters

Microwave-based plasma pyrolysis technology is being studied as a means of supporting oxygen recovery in future spacecraft life support systems. The process involves the conversion of methane produced from a Sabatier reactor to acetylene and hydrogen, with a small amount of solid carbon particulates generated as a side product. The particles must be filtered before the acetylene is removed and the hydrogen-rich gas stream is recycled back to the CRA. We discuss developmental work on porous metal media filters for removing the carbon particulate emissions from the PPA exit gas stream and to provide in situ media regeneration capability. Because of the high temperatures involved in oxidizing the deposited carbon during regeneration, there was particular focus in this development on the materials that could be used, the housing design, and heating methods. This paper describes the design and operation of the filter and characterizes their performance from integrated testing at the Environmental Chamber (E-Chamber) at MSFC.

Agui, Juan H.↗

NASA NTRS1978

Large-eddy simulation of a turbulent mixing layer

The three dimensional, time dependent (incompressible) vorticity equations were used to simulate numerically the decay of isotropic box turbulence and time developing mixing layers. The vorticity equations were spatially filtered to define the large scale turbulence field, and the subgrid scale turbulence was modeled. A general method was developed to show numerical conservation of momentum, vorticity, and energy. The terms that arise from filtering the equations were treated (for both periodic boundary conditions and no stress boundary conditions) in a fast and accurate way by using fast Fourier transforms. Use of vorticity as the principal variable is shown to produce results equivalent to those obtained by use of the primitive variable equations.

Mansour, N. N.↗

NASA NTRS2019

WRLES: Wave Resolving Large-Eddy Simulation Code, Theory and Usage

A computational fluid dynamics code has been developed for large-eddy simulations (LES) of turbulent flow. The code uses high-order of accuracy and high-resolution numerical methods to minimize solution error and maximize the resolution of the turbulent structures. Spatial discretization is performed using explicit central differencing. The central differencing schemes in the code include 2nd- to 12th-order standard central difference methods as well as 7-, 9-, 11- and 13-point dispersion relation preserving schemes. Solution filtering and high-order shock capturing are included for stability. Time discretization is performed using multistage Runge-Kutta methods that are up to 4th order accurate. Several options are available to model turbulence including: Baldwin-Lomax and Spalart-Allmaras Reynolds-averaged Navier-Stokes turbulence models, and Smagorinsky, Dynamic Smagorinsky and Vreman sub-grid scale models for LES. This report presents the theory behind the numerical and physical models used in the code and provides a user's manual to the operation of the code.

High-Order↗

NASA NTRS2021

Multi-Pass Sequential Mini-Batch Stochastic Gradient Descent Algorithms for Noise Covariance Estimation in Adaptive Kalman Filtering

Estimation of unknown noise covariances in a Kalman filter is a problem of significant practical interest in a wide array of applications. Although this problem has a long history, reliable algorithms for their estimation were scant, and necessary and sufficient conditions for identifiability of the covariances were in dispute until recently. Necessary and sufficient conditions for covariance estimation and a batch estimation algorithm were presented in our previous study. This paper presents stochastic gradient descent algorithms for noise covariance estimation in adaptive Kalman filters that are an order of magnitude faster than the batch method for similar or better root mean square error. More significantly, these algorithms are applicable to non-stationary systems where the noise covariances can occasionally jump up or down by an unknown magnitude. The computational efficiency of the new algorithms stems from adaptive thresholds for convergence, recursive fading memory estimation of the sample cross-correlations of the innovations, and accelerated stochastic gradient descent algorithms. The comparative evaluation of the proposed methods on a number of test cases demonstrates their computational efficiency and accuracy.

Adaptive Kalman filtering↗

NASA NTRS1980

A new approach to active control of rotorcraft vibration

A state-variable feedback approach is utilized for active control of rotorcraft vibration. Fuselage accelerations are passed through undamped second-order filters with resonant frequencies at N/rev. The resulting outputs contain predominantly the N/rev vibration components, phase shifted by 180 deg, and are used to drive the blade pitch to cancel this component of fuselage vibration. The linear-quadratic-gaussian (LQG) method is used to design a feedback control system utilizing these filtered accelerations. The design is based on a nine-degree-of-freedom linear model of the Rotor System Research Aircraft (RSRA) in hover and is evaluated on a nonlinear blade-element simulation of the RSRA for this flight condition. The system is shown to essentially eliminate vibrations at N/rev in all axes. The required blade-pitch amplitude is within the capability of conventional actuators at the N/rev frequency.

Gupta, N. K.↗

NASA NTRS2006

Iterative Magnetometer Calibration

This paper presents an iterative method for three-axis magnetometer (TAM) calibration that makes use of three existing utilities recently incorporated into the attitude ground support system used at NASA's Goddard Space Flight Center. The method combines attitude-independent and attitude-dependent calibration algorithms with a new spinning spacecraft Kalman filter to solve for biases, scale factors, nonorthogonal corrections to the alignment, and the orthogonal sensor alignment. The method is particularly well-suited to spin-stabilized spacecraft, but may also be useful for three-axis stabilized missions given sufficient data to provide observability.

Sedlak, Joseph↗

NASA NTRS1977

The analysis and interpretation of solar X-ray photographs

The paper examines methods of analyzing and interpreting solar X-ray photographs obtained by soft X-ray telescopes such as those used during the Skylab mission, to obtain information on the physical conditions that give rise to coronal X-ray emitting features revealed by inspection or microdensitometry of the X-ray photographs. First, the differential emission measure function is defined. By choosing models for this function and calculating the integral for the irradiance at the film for each filter, one calculates the effective temperature and emission measure. This method gives correct results only when applied to isothermal regions. For heterothermal regions, a modeling approach which predicts the run of temperature and density, and thus the form of the differential measure function, is used.

Underwood, J. H.↗

NASA NTRS1986

Performance comparisons on spatial lattice algorithm and direct matrix inverse method with application to adaptive arrays processing

Lattice algorithm has been employed in numerous adaptive filtering applications such as speech analysis/synthesis, noise canceling, spectral analysis, and channel equalization. In this paper the application to adaptive-array processing is discussed. The advantages are fast convergence rate as well as computational accuracy independent of the noise and interference conditions. The results produced by this technique are compared to those obtained by the direct matrix inverse method.

An, S. H.↗

NASA NTRSDate not supplied

Monocular Horizon Navigation

The Artemis program advances towards operations on the lunar surface, where precise surface localization is a driving need for safety and science. Using the observable horizon as an image landmark allows for estimating the photographer’s position. This work analyzes the application of Perspective-n-Point (PnP) algorithms to this lunar localization problem. Batch simulations using lunar topography display the accuracy and drawbacks of these methods. Monte Carlo techniques show the pipeline’s solutions as measurements provided to a navigation filter. When filtered, these solutions have position errors of 50 meters or better, which is similar to or better than the performance of other methods of surface localization.

optical navigation↗

NASA NTRS2001

High Order Difference Method for Low Mach Number Aeroacoustics

A high order finite difference method with improved accuracy and stability properties for computational aeroacoustics (CAA) at low Mach numbers is proposed. The Euler equations are split into a conservative and a symmetric non- conservative portion to allow the derivation of a generalized energy estimate. Since the symmetrization is based on entropy variables, that splitting of the flux derivatives is referred to as entropy splitting. Its discretization by high order central differences was found to need less numerical dissipation than conventional conservative schemes. Owing to the large disparity of acoustic and stagnation quantities in low Mach number aeroacoustics, the split Euler equations are formulated in perturbation form. The unknowns are the small changes of the conservative variables with respect to their large stagnation values. All nonlinearities and the conservation form of the conservative portion of the split flux derivatives can be retained, while cancellation errors are avoided with its discretization opposed to the conventional conservative form. The finite difference method is third-order accurate at the boundary and the conventional central sixth-order accurate stencil in the interior. The difference operator satisfies the summation by parts property analogous to the integration by parts in the continuous energy estimate. Thus, strict stability of the difference method follows automatically. Spurious high frequency oscillations are suppressed by a characteristic-based filter similar to but without limiter. The time derivative is approximated by a 4-stage low-storage second-order explicit Runge-Kutta method. The method has been applied to simulate vortex sound at low Mach numbers. We consider the Kirchhoff vortex, which is an elliptical patch of constant vorticity rotating with constant angular frequency in irrotational flow. The acoustic pressure generated by the Kirchhoff vortex is governed by the 2D Helmholtz equation, which can be solved analytically using separation of variables.

Mueller, B.↗

NASA NTRS1974

Physical oceanography from satellites: Currents and the slope of the sea surface

A global scheme using satellite altimetry in conjunction with thermometry techniques provides for more accurate determinations of first order leveling networks by overcoming discrepancies between ocean leveling and land leveling methods. The high noise content in altimetry signals requires filtering or correction for tides, etc., as well as carefully planned sampling schemes.

Sturges, W.↗

NASA NTRS1977

Problems in the use of interference filters for spectrophotometric determination of total ozone

An analysis of the use of ultraviolet narrow-band interference filters for total ozone determination is given with reference to the New Zealand filter spectrophotometer under the headings of filter monochromaticity, temperature dependence, orientation dependence, aging, and specification tolerances and nonuniformity. Quantitative details of each problem are given, together with the means used to overcome them in the New Zealand instrument. The tuning of the instrument's filter center wavelengths to a common set of values by tilting the filters is also described, along with a simple calibration method used to adjust and set these center wavelengths.

Basher, R. E.↗

NASA NTRS1979

Programs for high-speed Fourier, Mellin and Fourier-Bessel transforms

Several FORTRAN program modules for performing one-dimensional and two-dimensional discrete Fourier transforms, Mellin, and Fourier-Bessel transforms are described along with programs that realize the algebra of high speed Fourier transforms on a computer. The programs can perform numerical harmonic analysis of functions, synthesize complex optical filters on a computer, and model holographic image processing methods.

Ikhabisimov, D. K.↗

NASA NTRS1988

Spectral estimation of received phase in the presence of amplitude scintillation

A technique is demonstrated for obtaining the spectral parameters of the received carrier phase in the presence of carrier amplitude scintillation, by means of a digital phased locked loop. Since the random amplitude fluctuations generate time-varying loop characteristics, straightforward processing of the phase detector output does not provide accurate results. The method developed here performs a time-varying inverse filtering operation on the corrupted observables, thus recovering the original phase process and enabling accurate estimation of its underlying parameters.

Vilnrotter, V. A.↗